Find Parts That Fit Your Vehicle

BMW Underdrive Power Pulleys

Reduce parasitic loss of power on your BMW's engine by safely under driving the belt driven auxiliary systems. Reducing this drag on your engine results in MORE HORSEPOWER AND TORQUE to the wheels of your BMW. Our BMW underdrive power pulley kits are specifically designed for each BMW application to make the best power while maintaining stock driveability and reliability, eliminating potential downsides. Others may advertise "their" pulleys boasting more power, but we concluded that for street and track driven BMWs, ours are the best size and design to ensure both your engine and it's belt-driven systems (alternator, water pump, power steering etc) are well within safe operation. We run these under drive pulleys on our own BMWs, so we would not want them any other way.
Sort By:
S54 VAC Harmonic SuperDamper By ATI - Standard Size Crank Pulley
S54 VAC Harmonic SuperDamper By ATI - Standard Size Crank Pulley ...
ATI Performance Products - Corporate Logo
T#:639878
Part#: VAC-HPCDK-S54-ST
In Stock
$ 1,049.99 USD
Free Shipping
Add to Wish List
$ 1,049.99 USD
Free Shipping
Add to Wish List
If you are breaking crankshafts and oil pumps, the cause may be a mystery to you as it has been to many of our customers. We know that controlling the harmonic resonance of the BMW 6 is highly important as RPMs rise, but the ideal configuration of the inline-6 motor makes even experienced engine builders overlook some fundamental principals of engine harmonics that can be destructive. ATI Performance Products has partnered with VAC Motorsports to develop new dampers for BMW 2.5L, 2.8L, 3.0L and 3.2L straight-6 engines found in the E36 and E46 M3, E9X and E6X, as well as newer Z3s and Z4s. These dampers eliminate crankshaft harmonic vibration, which allows the engine to produce more horsepower and torque, while also reducing internal engine wear at the same time. Broken oil pumps and timing chains will be a thing of the past! When used with a VAC accessory pulley, these dampers are a direct replacement over the OEM balancer. They have a 7” outer diameter and include OEM style timing alignment tabs. BMW enthusiasts should know that all ATI Super Dampers exceed SFI 18.1 Safety Certification and are approved for competition. The advantages of the ATI SuperDamper include eliminating vibration issues with inline 6 engines equipped with lightweight clutch and flywheel assemblies, reduced bearing, engine accessories, oil pump wear, and compatibility with underdrive pulleys. Made in the USA.
Show More Show Less
VAC Harmonic S55 SuperDamper By ATI
VAC Harmonic S55 SuperDamper By ATI
ATI Performance Products - Corporate Logo
T#:639880
Part#: VAC-HPCD-S55
In Stock
$ 989.99 USD
Free Shipping
Add to Wish List
$ 989.99 USD
Free Shipping
Add to Wish List
If you are breaking crankshafts and oil pumps, the cause may be a mystery to you as it has been to many of our customers. We know that controlling the harmonic resonance of the BMW 6 is highly important as RPMs rise, but the ideal configuration of the inline-6 motor makes even experienced engine builders overlook some fundamental principals of engine harmonics that can be destructive. ATI Performance Products has partnered with VAC Motorsports to develop new dampers for BMW 2.5L, 2.8L, 3.0L and 3.2L straight-6 engines found in the E36 and E46 M3, E9X and E6X, as well as newer Z3s and Z4s. These dampers eliminate crankshaft harmonic vibration, which allows the engine to produce more horsepower and torque, while also reducing internal engine wear at the same time. Broken oil pumps and timing chains will be a thing of the past! When used with a VAC accessory pulley, these dampers are a direct replacement over the OEM balancer. They have a 7” outer diameter and include OEM style timing alignment tabs. BMW enthusiasts should know that all ATI Super Dampers exceed SFI 18.1 Safety Certification and are approved for competition. The advantages of the ATI SuperDamper include eliminating vibration issues with inline 6 engines equipped with lightweight clutch and flywheel assemblies, reduced bearing, engine accessories, oil pump wear, and compatibility with underdrive pulleys. Includes lightweight VAC Billet Crankshaft Pulley. Made in the USA.
Show More Show Less
VAC V2 Harmonic SuperDamper By ATI - BMW N54 3.0L
VAC V2 Harmonic SuperDamper By ATI - BMW N54 3.0L
ATI Performance Products - Corporate Logo
T#:639879
Part#: VAC-HPCD-N54
In Stock
$ 1,059.99 USD
Free Shipping
Add to Wish List
$ 1,059.99 USD
Free Shipping
Add to Wish List
If you are breaking crankshafts and oil pumps, the cause may be a mystery to you as it has been to many of our customers. We know that controlling the harmonic resonance of the BMW 6 is highly important as RPMs rise, but the ideal configuration of the inline-6 motor makes even experienced engine builders overlook some fundamental principals of engine harmonics that can be destructive. ATI Performance Products has partnered with VAC Motorsports to develop new dampers for BMW 2.5L, 2.8L, 3.0L and 3.2L straight-6 engines found in the E36 and E46 M3, E9X and E6X, as well as newer Z3s and Z4s. These dampers eliminate crankshaft harmonic vibration, which allows the engine to produce more horsepower and torque, while also reducing internal engine wear at the same time. Broken oil pumps and timing chains will be a thing of the past! When used with a VAC accessory pulley, these dampers are a direct replacement over the OEM balancer. They have a 7” outer diameter and include OEM style timing alignment tabs. BMW enthusiasts should know that all ATI Super Dampers exceed SFI 18.1 Safety Certification and are approved for competition. The advantages of the ATI SuperDamper include eliminating vibration issues with inline 6 engines equipped with lightweight clutch and flywheel assemblies, reduced bearing, engine accessories, oil pump wear, and compatibility with underdrive pulleys. Includes lightweight VAC Billet Crankshaft Pulley.
Show More Show Less
VAC Harmonic SuperDamper By ATI - BMW S50B32 EURO
VAC Harmonic SuperDamper By ATI - BMW S50B32 EURO
ATI Performance Products - Corporate Logo
T#:7355606
Part#: HPCDK-S50B32-S
Ships in 3 Business Days
$ 1,099.99 USD
Free Shipping
Add to Wish List
$ 1,099.99 USD
Free Shipping
Add to Wish List
VAC Harmonic SuperDamper By ATI - M50/S50/M52/S52
VAC Harmonic SuperDamper By ATI - M50/S50/M52/S52
ATI Performance Products - Corporate Logo
T#:639877
Part#: VAC-HPCD-M50-TR
Ships on Sep 1, 2026
$ 1,139.99 USD
Free Shipping
Add to Wish List
$ 1,139.99 USD
Free Shipping
Add to Wish List
If you are breaking crankshafts and oil pumps, the cause may be a mystery to you as it has been to many of our customers. We know that controlling the harmonic resonance of the BMW 6 is highly important as RPMs rise, but the ideal configuration of the inline-6 motor makes even experienced engine builders overlook some fundamental principals of engine harmonics that can be destructive. ATI Performance Products has partnered with VAC Motorsports to develop new dampers for BMW 2.5L, 2.8L, 3.0L and 3.2L straight-6 engines found in the E36 and E46 M3 as well as newer Z3s and Z4s. These dampers eliminate crankshaft harmonic vibration, which allows the engine to produce more horsepower and torque, while also reducing internal engine wear at the same time. Broken oil pumps and timing chains will be a thing of the past! When used with a VAC accessory pulley, these dampers are a direct replacement over the OEM balancer. They have a 7” outer diameter and include OEM style timing alignment tabs. BMW enthusiasts should know that all ATI Super Dampers exceed SFI 18.1 Safety Certification and are approved for competition. The advantages of the ATI SuperDamper include eliminating vibration issues with inline 6 engines equipped with lightweight clutch and flywheel assemblies, reduced bearing, engine accessories, oil pump wear, and compatibility with underdrive pulleys. Kit includes: Damper Lightweight VAC Billet Crankshaft Pulley Mounting and Installation Hardware Trigger Ring for OBD1 systems Note: Will NOT work with S50B30 & S50B32 Euro Engines, For Street/Track cars with Air Conditioning, the Additional A/C Pulley Option is REQUIRED as the OE A/C pulley is not compatible. The additional mounting and installation hardware is also included. Made in the USA
Show More Show Less
AFE Power Pulley - E60 M5
AFE Power Pulley - E60 M5
AFE - Corporate Logo
T#:382305
Part#: 79-10003
Ships in 3 Business Days
20% off MSRP $ 621.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 497.00 USD
Free Shipping
Add to Wish List
20% off MSRP
$ 621.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 497.00 USD
Free Shipping
Add to Wish List

aFe Power's new power pulley brings performance engineering to your BMW M5. This power pulley is a complete bolt-on kit, including the pulley, bolts, and belts. aFe’s power pulleys are CNC machined out of billet aluminum and black anodized for that aggressive look under the M5’s hood. This power pulley does not modify factory harmonics or dampening. In recent Dyno testing this power pulley produced 5 HP and 6lbs. x ft. torque. When it comes to engineering for power, performance, protection and value, aFe Power is the only choice. 

This part fits the following BMWs:
2006 - 2010 E60 M5 

Show More Show Less

Select Vehicle

BMW Mini
Clear Vehicle

Category

  • Underdrive Power Pulleys

Brand

Price

$
$