Find Parts That Fit Your Vehicle

Home
Suspension

BMW Suspension Parts

Your BMW's handling is determined by the capabilities and age of your suspension components. Our selected aftermarket performance suspension like coilovers, lowering springs, cup kits, and dampers can improve the handling of your BMW dramatically. With those upgrades comes the needs for proper adjustment; our recommended supporting modifications comes stiffer sway bars, bushings, and adjustable camber/caster plates, to name a few found on this page. Completely build your suspension for the most competitive BMW driving experience, achieve your perfect look, or simply replace your worn suspension with our recommended parts.

Sub-Categories

Sort By:

Macht Schnell EDC Emulation Module

T#:5351

Part#: TMS5351

Ships on Nov 13, 2026

$ 249.99

This product was last offered at the strikethrough price on
05-29-2026

$ 249.00 USD

Add to Wish List

Qty

$ 249.00 USD

Add to Wish List

For those wanting to move away from EDC for aftermarket suspension systems or coilover setups, the EDC monitoring can be a bit obtrusive as this type of monitoring is no longer required – resulting in numerous error messages thinking the system has malfunctioned. This EDC Emulation Module installs in less than 15 minutes and will fully emulate a fully active EDC environment when activated. Module can be activated/deactivated by via the integrated mini USB port within the module housing.

The Macht Schnell EDC Emulation Module is possible of the following features:

The ability to run aftermarket racing suspension/coilover setups in which EDC monitoring is not required

Compatible with iDrive and non-iDrive systems

Easy 15-minute installation process with no wire cutting

Proper emulation of the EDC monitoring system

No dealer visits or coding required after installation

Completely removable at any time

Note: The Macht Schnell EDC Emulation Module will disable the EDC monitoring system supplied by BMW. Once disabled the behavior of the car will change and the driver will need to adjust his/her skill and technique. For this reason, this module is not intended for street vehicles and its use may result in injury or even death if proper conditions and procedures are not followed.
Will not work on vehicles equiped with BMW's Dynamic Drive system.

This item fits the following BMWs:
2008-2011 E90 BMW M3 Sedan
2008-2013 E92 BMW M3 Coupe
2008-2013 E93 BMW M3 Convertible
2006-2010 E60 BMW M5
2006-2011 E63 BMW M6
2007-2013 E70 BMW X5 3.0si X5 4.8i X5 xDrive30i X5 xDrive35d X5 xDrive35i X5 xDrive48i
2008+ E71 BMW X6 xDrive35i X6 xDrive50i

Show More Show Less

CTS Turbo Lowering Springs - F80/F82 M3/M4

DCC compatible: These springs are compatible with DCC. These springs couple very well with dynamic damper co

T#:22064611

Part#: CTS-LS-003

Ships in 7 Business Days

Sale - Save 15% $ 249.99

This product was last offered at the strikethrough price on
09-29-2026

$ 212.49 USD

Add to Wish List

Qty

Sale - Save 15%

$ 249.99

This product was last offered at the strikethrough price on
09-29-2026

$ 212.49 USD

Add to Wish List

Featured: Improved handling Excellent ride quality A more aggressive look Precision-tuned spring rates Reduced fender gap If you are looking for a suspension upgrade that won't break the bank, look no further. These lowering springs from CTS will lower your 1.6" in front and 1" in rear on average after break-in eliminating that wheel gap and giving you better handling and driving performance.

Show More Show Less

CTS Lowering Spring Set - F30/F32 XDrive

T#:23053170

Part#: CTS-LS-017

Ships in 6 Business Days

Sale - Save 15% $ 249.99

This product was last offered at the strikethrough price on
09-29-2026

$ 212.49 USD

Add to Wish List

Qty

Sale - Save 15%

$ 249.99

This product was last offered at the strikethrough price on
09-29-2026

$ 212.49 USD

Add to Wish List

Enhance your BMW's performance and appearance with CTS Turbo's high-quality lowering springs. Manufactured using durable SAE 9254/DIN 54SiCr6 Spring Steel Wire, these springs guarantee safety, strength, and resistance to fatigue over time.

Designed for street use, focusing on handling, braking, and responsiveness without compromising ride comfort
Engineered in-house and extensively tested to ensure no detrimental effects on the OEM strut over long-term use
Lowers the car for an aggressive appearance, reducing wheel gap while maintaining daily drivability
DCC compatible, seamlessly working with dynamic damper control for consistent ride characteristics across different modes

Lowering Specs:

Front: Approximately 1.6" lowering
Rear: Approximately 1.5" lowering

Benefits:

Improved handling and ride quality
Sportier aesthetic appeal with reduced fender gap
Precision-tuned spring rates for optimal performance

Note: CTS suspension components should be installed by a qualified licensed mechanic experienced in suspension installations. Final ride height settles after a few days of driving.

Show More Show Less

CTS Turbo Lowering Spring Set - BMW G20 G22/23 G42

T#:51040000

Part#: LS-018

Ships in 7 Business Days

$ 249.99 USD

Add to Wish List

Qty

$ 249.99 USD

Add to Wish List

CTS Turbo lowering springs are designed to deliver the perfect balance between everyday comfort and responsive handling. These lowering springs significantly reduce body roll, resulting in improved turn-in response and enhanced stability during spirited driving.

Show More Show Less

CTS Turbo Lowering Springs - G82 M4/M4C

DCC compatible: These springs are compatible with DCC. These springs couple very well with dynamic damper co

T#:22064621

Part#: CTS-LS-015

Ships in 7 Business Days

Sale - Save 15% $ 299.99

This product was last offered at the strikethrough price on
09-29-2026

$ 254.99 USD

Add to Wish List

Qty

Sale - Save 15%

$ 299.99

This product was last offered at the strikethrough price on
09-29-2026

$ 254.99 USD

Add to Wish List

Featured: Improved handling Excellent ride quality A more aggressive look Precision-tuned spring rates Reduced fender gap If you are looking for a suspension upgrade that won't break the bank, look no further. These lowering springs from CTS will lower your 1.2" in front and 1.2" in rear on average after break-in eliminating that wheel gap and giving you better handling and driving performance.

Show More Show Less

Macht Schnell Solid Aluminum Subframe Bushing Kit - E9X M3/E82 1M ...

T#:4648679

Part#: 69.10.100

Ships on Nov 18, 2026

$ 289.00 USD

Add to Wish List

Qty

$ 289.00 USD

Add to Wish List

Macht Schnell's aluminum bushing kit will breathe new life into aging 1M's and M3's, affixing the car's rear subframe and differential to the chassis. Rubber subframe bushings in the E9x M3 and E82 1M from the factory are soft, and yield under hard driving resulting in ever-changing suspension geometry and alignment specs. By limiting the movement of both the car's subframe and differential, these solid bushings will give the rear of the car a tremendously planted and confident feel.

Show More Show Less

CTS Turbo Lowering Springs - G80 M3/M3C

T#:22064614

Part#: CTS-LS-014

Ships in 7 Business Days

Sale - Save 15% $ 299.99

This product was last offered at the strikethrough price on
09-29-2026

$ 254.99 USD

Add to Wish List

Qty

Sale - Save 15%

$ 299.99

This product was last offered at the strikethrough price on
09-29-2026

$ 254.99 USD

Add to Wish List

If you are looking for a suspension upgrade that won't break the bank, look no further. These lowering springs from CTS will lower your 1.4" in front and 1" in rear on average after break-in eliminating that wheel gap and giving you better handling and driving performance. Featured: Improved handling Excellent ride quality A more aggressive look Precision-tuned spring rates Reduced fender gap

Show More Show Less

Macht Schnell Aluminum Differential Bushing Kit - E9X M3

T#:4648688

Part#: 69.10.110

Ships in 8 Business Days

$ 299.00 USD

Add to Wish List

Qty

$ 299.00 USD

Add to Wish List

Macht Schnell's Aluminum Differential Bushing Kit is designed to give your differential carrier more rigidity.

CTS Turbo Lowering Springs - F55/F56 MINI Cooper

DCC compatible: These springs are compatible with DCC. These springs couple very well with dynamic damper co

T#:22064606

Part#: CTS-LS-005

Ships in 7 Business Days

Sale - Save 15% $ 249.99

This product was last offered at the strikethrough price on
09-29-2026

$ 212.49 USD

Add to Wish List

Qty

Sale - Save 15%

$ 249.99

This product was last offered at the strikethrough price on
09-29-2026

$ 212.49 USD

Add to Wish List

Featured: Improved handling Excellent ride quality A more aggressive look Precision-tuned spring rates Reduced fender gap If you are looking for a suspension upgrade that won't break the bank, look no further. These lowering springs from CTS will lower your 1" front and rear on average after break-in eliminating that wheel gap and giving you better handling and driving performance.

Show More Show Less

CTS Turbo Strut Brace Set

T#:18932319

Part#: CTS-SUS-3002

Ships in 7 Business Days

Sale - Save 15% $ 279.99

This product was last offered at the strikethrough price on
09-29-2026

$ 237.99 USD

Add to Wish List

Qty

Sale - Save 15%

$ 279.99

This product was last offered at the strikethrough price on
09-29-2026

$ 237.99 USD

Add to Wish List

These braces are used to increase front end stiffness, improving turn-in response and handling. Designed to use factory mounting holes, these strut braces bolt-up in minutes. Machined from solid aluminum and anodized in shiny gloss black, the CTS Turbo strut brace not only performs great but also looks great. FEATURES: 1-piece design machined from a solid block of billet aluminum. Direct bolt-on replacement, no drilling required. Hardware included. Compatible with factory or aftermarket intakes (SOME INTAKES ARE NOT COMPATIBLE). Designed and made in Canada.

Show More Show Less

CTS Lowering Spring Set - F30/F32 RWD

T#:23053173

Part#: CTS-LS-016

Ships in 7 Business Days

Sale - Save 15% $ 249.99

This product was last offered at the strikethrough price on
09-29-2026

$ 212.49 USD

Add to Wish List

Qty

Sale - Save 15%

$ 249.99

This product was last offered at the strikethrough price on
09-29-2026

$ 212.49 USD

Add to Wish List

Enhance your BMW's performance and aesthetics with CTS Turbo's high-quality lowering springs. Crafted from durable SAE 9254/DIN 54SiCr6 Spring Steel Wire, these springs ensure safety, strength, and long-term durability.

Key Features:

Designed for street use, focusing on handling, braking, and responsiveness without compromising ride comfort
In-house engineered and extensively tested to ensure no detrimental effects on OEM struts over long-term use
Lowers the car for a more aggressive appearance while reducing wheel gap, maintaining daily drivability
DCC compatible, ensuring compatibility with dynamic damper control for consistent ride characteristics across modes

Lowering Specs:

Front: Approximately 1.0" lowering
Rear: Approximately 1.0" lowering

Featured Advantages:

Improved handling and ride quality
Enhanced aesthetics with a more aggressive look and reduced fender gap

Notes:

CTS suspension components should be installed by a qualified licensed mechanic experienced in suspension installations
Final ride height settles after a few days of driving

Show More Show Less

CTS Turbo Strut Brace Set - BMW G20 G22/G23

T#:51075082

Part#: SUS-3002

Ships in 7 Business Days

15% off MSRP $ 279.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 237.99 USD

Add to Wish List

Qty

15% off MSRP

$ 279.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 237.99 USD

Add to Wish List

Select Vehicle

Purpose

Category

Home

Suspension

Brand

View All Brands

Price

Special Offers

On Sale (7)

Shipping