Find Parts That Fit Your Vehicle

BMW Suspension Parts

Your BMW's handling is determined by the capabilities and age of your suspension components. Our selected aftermarket performance suspension like coilovers, lowering springs, cup kits, and dampers can improve the handling of your BMW dramatically. With those upgrades comes the needs for proper adjustment; our recommended supporting modifications comes stiffer sway bars, bushings, and adjustable camber/caster plates, to name a few found on this page. Completely build your suspension for the most competitive BMW driving experience, achieve your perfect look, or simply replace your worn suspension with our recommended parts.

Sub-Categories

Sort By:

Macht Schnell EDC Emulation Module
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Macht Schnell - Corporate Logo
T#:5351
Part#: TMS5351
Ships on Jul 30, 2026
$ 249.99

This product was last offered at the strikethrough price on
05-29-2026

$ 249.00 USD
Free Shipping
$ 249.00 USD
Free Shipping
For those wanting to move away from EDC for aftermarket suspension systems or coilover setups, the EDC monitoring can be a bit obtrusive as this type of monitoring is no longer required – resulting in numerous error messages thinking the system has malfunctioned. This EDC Emulation Module installs in less than 15 minutes and will fully emulate a fully active EDC environment when activated. Module can be activated/deactivated by via the integrated mini USB port within the module housing.

The Macht Schnell EDC Emulation Module is possible of the following features:
  • The ability to run aftermarket racing suspension/coilover setups in which EDC monitoring is not required
  • Compatible with iDrive and non-iDrive systems
  • Easy 15-minute installation process with no wire cutting
  • Proper emulation of the EDC monitoring system
  • No dealer visits or coding required after installation
  • Completely removable at any time

    Note: The Macht Schnell EDC Emulation Module will disable the EDC monitoring system supplied by BMW. Once disabled the behavior of the car will change and the driver will need to adjust his/her skill and technique. For this reason, this module is not intended for street vehicles and its use may result in injury or even death if proper conditions and procedures are not followed.
    Will not work on vehicles equiped with BMW's Dynamic Drive system.

    This item fits the following BMWs:
    2008-2011 E90 BMW M3 Sedan
    2008-2013 E92 BMW M3 Coupe
    2008-2013 E93 BMW M3 Convertible
    2006-2010 E60 BMW M5
    2006-2011 E63 BMW M6
    2007-2013 E70 BMW X5 3.0si X5 4.8i X5 xDrive30i X5 xDrive35d X5 xDrive35i X5 xDrive48i
    2008+ E71 BMW X6 xDrive35i X6 xDrive50i
  • Show More Show Less
    BMS Billet Strut Cross Braces - Anodized Blue - BMW G01 X3, G02 X4, F...
    affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
    Burger Motorsports - Corporate Logo
    T#:39126850
    Part#: BMSBILSCB-BLU
    In Stock
    $ 249.00 USD
    Free Shipping on orders $49 and up
    Burger Motorsports' Billet Strut Cross Braces are designed and made in the USA from billet aluminum in a solid one-piece design. These braces connect from the strut towers to the front radiator support, helping to reinforce your entire front end while also giving your BMW an exclusive under-hood appearance.
    Show More Show Less
    Burger Motorsports Billet Strut Cross Braces - Red - G20 M340i 330i, ...
    affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
    Burger Motorsports - Corporate Logo
    T#:637421
    Part#: BMSG20BSCB-RED
    Ships on Jul 28, 2026
    $ 199.00 USD
    Free Shipping on orders $49 and up
    Constructed from lightweight billet aluminum with the BMS logo engraved on the top middle. These strut braces are a solid one-piece design. These give an exclusive look under the hood and extra stabilization to the chassis.
    Show More Show Less

    Burger Motorsports Billet Strut Cross Braces - Blue - G20 M340i 330i,...
    affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
    Burger Motorsports - Corporate Logo
    T#:637422
    Part#: BMSG20BSCB-BLUE
    Ships on Jul 28, 2026
    $ 199.00 USD
    Free Shipping on orders $49 and up
    Constructed from lightweight billet aluminum with the BMS logo engraved on the top middle. These strut braces are a solid one-piece design. These give an exclusive look under the hood and extra stabilization to the chassis.
    Show More Show Less

    Burger Motorsports Billet Strut Cross Braces - Black - G20 M340i 330i...
    affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
    Burger Motorsports - Corporate Logo
    T#:637424
    Part#: BMSG20BSCB-BLK
    Ships in 7 Business Days
    $ 199.00 USD
    Free Shipping
    $ 199.00 USD
    Free Shipping
    Constructed from lightweight billet aluminum with the BMS logo engraved on the top middle. These strut braces are a solid one-piece design. These give an exclusive look under the hood and extra stabilization to the chassis.
    Show More Show Less
    BMS Billet Strut Cross Braces - Anodized Black - BMW G01 X3, G02 X4, ...
    affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
    Burger Motorsports - Corporate Logo
    T#:39126853
    Part#: BMSBILSCB-BLK
    Ships on Jul 28, 2026
    $ 249.00 USD
    Free Shipping on orders $49 and up
    Burger Motorsports' Billet Strut Cross Braces are designed and made in the USA from billet aluminum in a solid one-piece design. These braces connect from the strut towers to the front radiator support, helping to reinforce your entire front end while also giving your BMW an exclusive under-hood appearance.
    Show More Show Less

    Burger Motorsports Billet Strut Cross Braces - Silver - G20 M340i 330...
    affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
    Burger Motorsports - Corporate Logo
    T#:637423
    Part#: BMSG20BSCB-SIL
    Ships on Jul 28, 2026
    $ 255.99 USD
    Free Shipping
    $ 255.99 USD
    Free Shipping
    Constructed from lightweight billet aluminum with the BMS logo engraved on the top middle. These strut braces are a solid one-piece design. These give an exclusive look under the hood and extra stabilization to the chassis.
    Show More Show Less
    Billet Strut Cross Braces For G30 G14 G15 G16
    affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
    Burger Motorsports - Corporate Logo
    T#:27138580
    Part#: BMSG30SB
    Ships on Jul 28, 2026
    Starting at $ 249.00 USD
    Free Shipping on orders $49 and up
    Starting at $ 249.00 USD
    Free Shipping on orders $49 and up
    The Burger Motorsports Billet Strut Cross Braces for the G30, G14, G15, and G16 are designed and made in the USA from lightweight billet aluminum with the BMS logo engraved on the top middle. These strut braces are a solid one-piece design. These give an exclusive look under the hood and extra stabilization to the chassis. Easy 5-minute install. Simply remove your factory strut braces and replace them with the BMS units for better structural integrity and amazing looks under the hood. Sold in pairs. Available in Black, Silver, Blue, and Red anodized. Single-piece design made from a solid block of billet aluminum Improved chassis rigidity and structural integrity Decreased chassis flex during cornering Utilizes stock mounting bolts Direct bolt-on replacement. No drilling required Made in the USA
    Show More Show Less

    Macht Schnell Solid Aluminum Subframe Bushing Kit - E9X M3/E82 1M ...
    affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
    Macht Schnell - Corporate Logo
    T#:4648679
    Part#: 69.10.100
    Ships in 8 Business Days
    $ 289.00 USD
    Free Shipping
    $ 289.00 USD
    Free Shipping
    Macht Schnell's aluminum bushing kit will breathe new life into aging 1M's and M3's, affixing the car's rear subframe and differential to the chassis. Rubber subframe bushings in the E9x M3 and E82 1M from the factory are soft, and yield under hard driving resulting in ever-changing suspension geometry and alignment specs. By limiting the movement of both the car's subframe and differential, these solid bushings will give the rear of the car a tremendously planted and confident feel.
    Show More Show Less

    Macht Schnell Aluminum Differential Bushing Kit - E9X M3
    affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
    Macht Schnell - Corporate Logo
    T#:4648688
    Part#: 69.10.110
    Ships in 8 Business Days
    $ 299.00 USD
    Free Shipping on orders $49 and up
    Macht Schnell's Aluminum Differential Bushing Kit is designed to give your differential carrier more rigidity.
    Burger Motorsports Billet Strut Cross Braces - Red - BMW G22/G23/G26 ...
    affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
    Burger Motorsports - Corporate Logo
    T#:46924996
    Part#: G22BSCB-RED
    Ships on Jul 28, 2026
    $ 199.00 USD
    Free Shipping on orders $49 and up
    Burger Motorsports' strut braces are CNC machined from thick, lightweight billet aluminum with the BMS logo engraved on the top middle. These strut braces are a thick, solid one-piece design and give an exclusive look under the hood and extra stabilization to the chassis.
    Show More Show Less
    Burger Motorsports Billet Strut Cross Braces - Silver - BMW G22/G23/G...
    affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
    Burger Motorsports - Corporate Logo
    T#:46924997
    Part#: G22BSCB-SIL
    Ships on Jul 28, 2026
    $ 199.00 USD
    Free Shipping on orders $49 and up
    Burger Motorsports' strut braces are CNC machined from thick, lightweight billet aluminum with the BMS logo engraved on the top middle. These strut braces are a thick, solid one-piece design and give an exclusive look under the hood and extra stabilization to the chassis.
    Show More Show Less


    Burger Motorsports Billet Strut Cross Braces - Black - BMW G22/G23/G2...
    affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
    Burger Motorsports - Corporate Logo
    T#:46924999
    Part#: G22BSCB-BLK
    Ships on Jul 28, 2026
    $ 199.00 USD
    Free Shipping on orders $49 and up
    Burger Motorsports' strut braces are CNC machined from thick, lightweight billet aluminum with the BMS logo engraved on the top middle. These strut braces are a thick, solid one-piece design and give an exclusive look under the hood and extra stabilization to the chassis.
    Show More Show Less
    Burger Motorsports Billet Strut Cross Braces - Blue - BMW G22/G23/G26...
    affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
    Burger Motorsports - Corporate Logo
    T#:46924998
    Part#: G22BSCB-BLU
    Ships on Jul 28, 2026
    $ 199.00 USD
    Free Shipping on orders $49 and up
    Burger Motorsports' strut braces are CNC machined from thick, lightweight billet aluminum with the BMS logo engraved on the top middle. These strut braces are a thick, solid one-piece design and give an exclusive look under the hood and extra stabilization to the chassis.
    Show More Show Less
    BMS Billet Strut Cross Braces - Anodized Silver - BMW G01 X3, G02 X4,...
    affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
    Burger Motorsports - Corporate Logo
    T#:39126854
    Part#: BMSBILSCB-SIL
    Ships on Jul 28, 2026
    $ 249.00 USD
    Free Shipping on orders $49 and up
    Burger Motorsports' Billet Strut Cross Braces are designed and made in the USA from billet aluminum in a solid one-piece design. These braces connect from the strut towers to the front radiator support, helping to reinforce your entire front end while also giving your BMW an exclusive under-hood appearance.
    Show More Show Less

    BMS Billet Strut Cross Braces - Anodized Red - BMW G01 X3, G02 X4, F9...
    affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
    Burger Motorsports - Corporate Logo
    T#:39126852
    Part#: BMSBILSCB-RED
    Ships on Jul 28, 2026
    $ 249.00 USD
    Free Shipping on orders $49 and up
    Burger Motorsports' Billet Strut Cross Braces are designed and made in the USA from billet aluminum in a solid one-piece design. These braces connect from the strut towers to the front radiator support, helping to reinforce your entire front end while also giving your BMW an exclusive under-hood appearance.
    Show More Show Less

    BMS Billet Strut Cross Braces - G29 BMW Z4
    affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
    Burger Motorsports - Corporate Logo
    T#:27138575
    Part#: BMSZ4SB
    Ships on Jul 28, 2026
    Starting at $ 249.00 USD
    Free Shipping on orders $49 and up
    Starting at $ 249.00 USD
    Free Shipping on orders $49 and up
    The Burger Motorsports Billet Strut Cross Braces for the 2019+ G29 BMW Z4 are designed and made in the USA from lightweight billet aluminum with the BMS logo engraved on the top middle. These strut braces are a solid one-piece design. These give an exclusive look under the hood and extra stabilization to the chassis. Easy 5-minute install. Simply remove your factory strut braces and replace them with the BMS units for better structural integrity and amazing looks under the hood. Sold in pairs. Available in Black, Silver, Blue, and Red anodized. The perfect addition to your G29 BMW Z4 engine bay Single-piece design made from a solid block of billet aluminum Improved chassis rigidity and structural integrity Decreased chassis flex during cornering Utilizes stock mounting bolts Direct bolt-on replacement. No drilling required Made in the USA
    Show More Show Less