MINI R56 Front Left Loaded Front Strut provides a convenient and efficient solution for replacing your vehicle’s front strut, spring, and strut mount. This pre-assembled unit eliminates the need for special disassembling tools, as it comes fully assembled, allowing for a quicker and easier installation with standard hand tools.
MINI R53 Loaded Front Strut - Front Right offers a convenient solution for replacing your front strut, spring, and strut mount with a pre-assembled unit. This fully assembled strut assembly eliminates the need for special disassembling tools, allowing for a quick and easy replacement using standard hand tools.
When an E9X is lowered beyond the limits of just lowering springs, the rear wheels toe-in excessively. This excessive rear toe leads to premature wear, that many people attribute to an increase in negative camber. It has become a common belief that an extremely low vehicle will wear the tires wrong as a matter of consequence. It has become standard practice to go as low as you can and proceed to replace your tires every five to ten thousand miles. Whats more is that when the vehicle reaches a certain ride height, the factory arms become maxed out and there is no way to compensate and dial in the proper toe. You're left with an improperly aligned vehicle that is in effect worse off than it was with the stock suspension installed.
This is not only uneconomical but improper and unsafe. ECS Tuning is proud to offer a solution for this problem in the form of Rogue Engineering E9X adjustable rear toe arms. These arms allow for greater toe adjustment on vehicles that have been lowered with a coilover suspension. With the toe set properly the tires can contact the road properly this maximizes grip and minimizes wear.
Features:
MINI R53 Loaded Front Left Strut offers a convenient, pre-assembled solution for replacing your front strut, spring, and strut mount. This fully assembled unit eliminates the need for special disassembling tools, allowing for a quick and straightforward installation with standard hand tools.
Rally Road Productions, Inc. is a team supported by a group of people with great abilities in their area of expertise. From the "web guy" and driving instructor friends, to owners of various machine shops, they have surrounded ourselves with people that can be trusted to create and manufacture quality products. This is the key to ensuring everything that they sell will perform as it was intended. The goal is to increase customer satisfaction and make the customization or performance enhancement of your vehicle a more enjoyable venture.
Have you ever snapped a transmission brace under full throttle? NOT a fun experience. For that reason, Rally Road has come up with the very last transmission brace your E36 will ever need.
Back when the minds at BMW set out to design the E36's lower transmission support, they executed perfectly. A cast piece manufactured from lightweight aluminum would surely provide the proper support for the business end of the powertrain. This part functioned fine...mostly...when the vehicle was driven modestly. However, push it too hard and this brace becomes perfectly unusable when it snaps in half.
This upgraded piece is manufactured out of solid steel. Laser cut, precision CNC bent, and then tig welded together - this thing is ready to take a beating. Finish it off with a flawless black powder coat and what you have is a transmission brace that is as beautiful as it is bulletproof. Whether you're considering this as an alternative to an already broken piece or just shopping for your next mod, this is a must-have for ANY E36 owner.
Updated design! Now shipping!
When an E9X is lowered beyond the limits of just lowering springs, the rear wheels toe-in excessively. This excessive rear toe leads to premature wear, that many people attribute to an increase in negative camber. It has become a common belief that an extremely low vehicle will wear the tires wrong as a matter of consequence. It has become standard practice to go as low as you can and proceed to replace your tires every five to ten thousand miles. Whats more is that when the vehicle reaches a certain ride height, the factory arms become maxed out and there is no way to compensate and dial in the proper toe. You're left with an improperly aligned vehicle that is in effect worse off than it was with the stock suspension installed.
This is not only uneconomical but improper and unsafe. ECS Tuning is proud to offer a solution for this problem in the form of Rogue Engineering E9X adjustable rear toe arms. These arms allow for greater toe adjustment on vehicles that have been lowered with a coilover suspension. With the toe set properly the tires can contact the road properly this maximizes grip and minimizes wear.
Features:
100% machined and anodized, 6061-T6 lightweight aluminum arms (and collars).
Stainless hardware and spacers are perfect for the tough Northeast climate!
New! Easy adjustment with 22mm open ended wrench and 5mm allen key! It only requires 15 ft. lbs. on the clamp to secure the clamp!
New! Included lock-out kit, replaces factory eccentric hardware.
Updated 3-piece rod ends features 4130 chromoly steel bodies, heat-treated, alloy steel races, and Teflon liners
Extremely easy installation and adjustment (your alignment shop will LOVE you!)
Since established in 2004, GSP North America has positioned itself as a leading supplier of New Axles in North America.GSP’s new axle program consistently offers the best application coverage, most SKU count, and more new numbers than any other competitors. GSP’s hub assembly program was introduced to North America market in 2010 and has grown into one the most trustable programs in US market.
This item fits the following BMWs:
E82/88 BMW 128i 135i
E90/92 BMW 325i 328i 328i xDrive 330i 335i
Since established in 2004, GSP North America has positioned itself as a leading supplier of New Axles in North America.GSP’s new axle program consistently offers the best application coverage, most SKU count, and more new numbers than any other competitors. GSP’s hub assembly program was introduced to North America market in 2010 and has grown into one the most trustable programs in US market.
This item fits the following BMWs:
E82/88 BMW 128i 135i
E90/92 BMW 325i 328i 328i xDrive 330i 335i
Experience the pinnacle of performance and style with our fully redesigned Carbon Fiber Strut Brace Bar. Meticulously crafted from 100% Prepreg carbon fiber using an autoclave tubular system, this brace bar sets a new standard in durability and engineering precision.
Featuring a striking 2x2 twill weave matte carbon fiber finish, complemented by black accents on the CNC mounting brackets, this front strut brace not only enhances your vehicle's appearance but also delivers unparalleled functionality.
Key Features:
Enhanced Rigidity: Exceptional chassis rigidity improves handling and responsiveness, enhancing your driving experience. Weight Reduction: Our design sheds 5.5 lbs of weight, boosting performance and agility on the road or track. Sporty Appearance: Elevate your car's aesthetic with a sleek, sporty look that perfectly complements its performance category. Integrated CNC Machined Aluminum: Reinforced with CNC machined 6061 aluminum components, anodized in a natural color, for added strength and a touch of style. Easy Installation: Quick and straightforward installation means you can enjoy the benefits of a sportier ride without any hassle or extensive downtime. Upgrade your driving dynamics and make a statement with our Carbon Fiber Strut Brace Bar, transforming your car into a true performance machine.
Experience the pinnacle of performance and style with our fully redesigned Carbon Fiber Strut Brace Bar. Meticulously crafted from 100% Prepreg carbon fiber using an autoclave tubular system, this brace bar sets a new standard in durability and engineering precision.
Featuring a striking 2x2 twill weave matte carbon fiber finish, complemented by black accents on the CNC mounting brackets, this front strut brace not only enhances your vehicle's appearance but also delivers unparalleled functionality.
Key Features:
Enhanced Rigidity: Exceptional chassis rigidity improves handling and responsiveness, enhancing your driving experience. Weight Reduction: Our design sheds 5.5 lbs of weight, boosting performance and agility on the road or track. Sporty Appearance: Elevate your car's aesthetic with a sleek, sporty look that perfectly complements its performance category. Integrated CNC Machined Aluminum: Reinforced with CNC machined 6061 aluminum components, anodized in a natural color, for added strength and a touch of style. Easy Installation: Quick and straightforward installation means you can enjoy the benefits of a sportier ride without any hassle or extensive downtime. Upgrade your driving dynamics and make a statement with our Carbon Fiber Strut Brace Bar, transforming your car into a true performance machine.
