BMW Suspension Parts

If you are looking for a wider range of camber adjustability in the rear of you car, the IRP Adjustable rear lower control arm is exactly what you need! Built to be much stronger than stock, these rear control arms feature inner monoball bushings and are built of steel, reducing the weight as well. These are perfect for a lowered car or for a track car that needs a greater level of rear adjustment.

Features:

• Strong Steel Construction
• Adjustable
• Painted Yellow For Corrosion Protection
• Weight Reduction
• Monoball Inner Mount

This item fits the following BMWs:
1992-1999 E36 BMW 318i 318is 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
1999-2006 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi M3
2003-2008 E85 BMW Z4 2.5i Z4 3.0i Z4 3.0si Z4 M Roadster M Coupe

The strut mount is a critical suspension component that provides a secure mounting point and pivot for your BMW's front strut. With higher mileage, the built-in bearing can wear out, leading to reduced suspension performance, increased noise, and compromised handling.

For optimal suspension function and durability, it’s recommended to replace the strut mounts whenever installing new front struts. Choose this premium replacement from Bremmen Parts for a reliable and long-lasting repair.

**For vehicles with coilover front suspension**

When looking to dial in your steering geometry and alignment for reduced tire where and/or better track handling, the stock suspension is quite limited. To fix this, you can install Camber/Caster plates such as these plates from IRP. Camber/Caster plates allow for adjustment of the top position of the shock's mounting position. These slight adjustments have a huge impact on the stance of the of the wheel when driving straight down the road and when turning into a corner. With simple adjustments, you can increase the grip of the tires in hard turns, improve tread life, or even just make an alignment correction for a vehicle with a lowered ride height. 

The IRP Camber Caster plates are made of an aircraft grade aluminum body, for strength and low weight, with an adjustable mounting plate that utilizes a steel monoball mounting point. This makes the plate resistant to corrosion and prevents deformation even with the stiffest shocks and springs.

Features:

• Decreased understeer
• Decreases outside edge tire wear
• Aircraft Grade Aluminum Construction
• Steel Monoball and Mounting Sleeves

Fits the following BMWs:
1991-1999 E36 BMW

**For vehicles with stock style springs**

When looking to dial in your steering geometry and alignment for reduced tire where and/or better track handling, the stock suspension is quite limited. To fix this, you can install Camber/Caster plates such as these plates from IRP. Camber/Caster plates allow for adjustment of the top position of the shock's mounting position. These slight adjustments have a huge impact on the stance of the of the wheel when driving straight down the road and when turning into a corner. With simple adjustments, you can increase the grip of the tires in hard turns, improve tread life, or even just make an alignment correction for a vehicle with a lowered ride height. 

The IRP Camber Caster plates are made of an aircraft grade aluminum body, for strength and low weight, with an adjustable mounting plate that utilizes a steel monoball mounting point. This makes the plate resistant to corrosion and prevents deformation even with the stiffest shocks and springs.

Features:

• Decreased understeer
• Decreases outside edge tire wear
• Aircraft Grade Aluminum Construction
• Steel Monoball and Mounting Sleeves

Fits the following BMWs:
1991-1999 E36 BMW

Looking to give your BMW a more aggressive stance and improve handling? Eibach springs are a great option! Having been tried and tested for years, they have proven their reliability and are backed up with a Million-Mile Warranty!

High Performance Handling and Aggressive Good Looks.
Lower Center of Gravity.
Stop Quicker, Corner Faster and get Better MPG!
Progressive Spring Design for Excellent Ride Quality.
Million-Mile Warranty
Front Lowering: -.8 inches
Rear Lowering: -.6 inches

Air springs replace traditional coil springs in your vehicle's suspension system, providing the ability to automatically adjust the spring rate and ride height by inflating or deflating the spring assembly as needed. This ensures a smooth ride and optimal handling across various driving conditions.

However, over time, air springs can develop leaks, compromising their ability to maintain the necessary air pressure. When this happens, the suspension may fail to keep the vehicle level or provide a smooth ride.

Worn or broken sway bar end links can significantly impact your vehicle's handling, preventing the sway bar from functioning properly. Restore your suspension performance with a high-quality OE replacement sway bar end link from Bremmen. Upgrading to new end links reduces body roll, improves cornering, and enhances overall driving dynamics—an excellent way to refresh your suspension system.

Common signs of failing sway bar end links include loose handling in corners, knocking noises, and a sloppy feel when driving over bumps. Fortunately, replacing them is straightforward and can be done by any automotive enthusiast.

Worn or broken sway bar end links can significantly impact your vehicle's handling, preventing the sway bar from functioning properly. Restore your suspension performance with a high-quality OE replacement sway bar end link from Bremmen. Upgrading to new end links reduces body roll, improves cornering, and enhances overall driving dynamics—an excellent way to refresh your suspension system.

Common signs of failing sway bar end links include loose handling in corners, knocking noises, and a sloppy feel when driving over bumps. Fortunately, replacing them is straightforward and can be done by any automotive enthusiast.

MINI F54 to F60 Rear Adjustable Camber Arm - Pair - SPC Performance - Lower is designed to enhance the handling and alignment of lowered MINI vehicles. This adjustable control arm allows for precise rear camber adjustments while maintaining factory alignment settings, making it ideal for vehicles with modified suspension setups.

• Enhanced Adjustability: Offers a camber adjustment range of ±3.0°, allowing for precise alignment tuning.
• Durable Construction: Made from high-strength steel with fully forged ends for maximum durability and performance.
• Reduced NVH: Features high durometer rubber bushings that minimize noise, vibration, and harshness for a smoother driving experience.
• Improved Handling: Helps retain factory alignment even with lowered suspension, optimizing handling characteristics.

This set includes two rear camber arms for a complete upgrade.

A strut tower brace adds additional reinforcement to the front strut towers, tying them together for extra rigidity. This makes the whole structure stronger with less chassis flex. Handling and steering feel are improved with better turn-in and input with no downsides. 

The IRP adjustable strut brace bar is a high quality brace that is constructed of 100% steel for guaranteed reinforcement and prevention of flex. The brace bar is painted black to ensure corrosion protection.

Easily installed with basic hand tools.

*Does not fit convertible chassis"

Fits the following BMW chassis:
E36 BMW All Submodels