This product was last offered at the strikethrough price on
05-03-2026
This product was last offered at the strikethrough price on
05-03-2026
This product was last offered at the strikethrough price on
05-29-2026
This product was last offered at the strikethrough price on
05-05-2026
This product was last offered at the strikethrough price on
05-05-2026
Enhance your BMW’s performance and style with this unbeatable combo! The Turner Motorsport Carbon Fiber Strut Brace and Engine Cover are the ultimate pair to upgrade chassis stability and engine bay aesthetics—all with a single purchase.
G20/G42 Carbon Fiber Strut Brace
For G20 and G42 BMW models equipped with the B48 or B58 engines, the driving thrill is undeniable. Yet, these cars lack a crucial component found in high-performance M models: structural chassis bracing. With Turner Motorsport’s 3-point Carbon Fiber Strut Brace, you’re adding the missing link to your BMW, mirroring the handling stability of an M3 or M4. This is the only strut brace that elevates G20/G42 handling by emulating the stiffness of an M-series chassis, giving you a dynamic edge on both road and track.
The strut brace fits seamlessly into your BMW using the original factory hardware and an included stud kit, offering a hassle-free, direct installation with no modifications required. Designed and tested in-house by Turner Motorsport, this brace reduces chassis flex, enhancing control during spirited driving and providing a tighter, more responsive feel. Constructed from high-strength carbon fiber with billet aluminum end brackets, this strut brace boosts performance while adding an eye-catching focal point to your engine bay.
Strut Brace Features:
Enhanced Chassis Rigidity: Reduces flex by linking the strut towers, promoting a more precise steering response. Street and Track Ready: Engineered for the best of both worlds, offering stability in all driving conditions. Premium Carbon Fiber & Billet Aluminum: Lightweight yet highly rigid, with a stunning woven 2x2 twill finish. Easy Installation: Fits perfectly with stock mounting points using supplied hardware, ensuring a hassle-free setup. Carbon Fiber: Performance & Style
Turner’s strut brace uses structural carbon fiber, designed to endure the rigors of aggressive driving without compromising aesthetics. The brace's distinct, gloss-finished carbon fiber weave adds a sophisticated, high-performance look akin to exotic supercars. Engineered for precision, this brace effectively distributes cornering forces between the strut towers, minimizing chassis distortion and maintaining optimal wheel alignment, even in hard turns.
Turner Motorsport G-Chassis Carbon Fiber Engine Cover for B58 Engines
Give your G-Chassis BMW’s engine bay a polished, refined look with Turner’s Carbon Fiber Engine Cover. This direct replacement cover is crafted from hand-laid, gloss-finished carbon fiber, delivering a resilient, UV-protected finish. With an OE-style indentation for the BMW badge, this cover complements your engine bay with a sleek, factory look that stands out.
Engine Cover Highlights:
Direct Fitment: Seamlessly replaces the stock cover, utilizing factory mounting grommets and hardware. Durable Gloss Finish: Ensures long-lasting shine and UV protection. Distinctive Style: A premium upgrade that elevates the aesthetic of your B58 engine. Installation Notes:
Simply transfer the OE grommets and badge from the stock cover to the carbon fiber engine cover for a perfect fit—installation takes seconds!
MINI R55 to R59 OMP Steel Front Strut Tower Brace is designed to enhance the performance and handling of the MINI Cooper by reducing body roll and torsion. Constructed from high-strength steel and painted red, this strut tower brace features an adjustable bar that mounts securely to the strut towers using the stock hardware. It is engineered to clear the stock air box, ensuring a seamless fit without interference. Please note that this brace will not fit the MINI Cooper JCW GP2 without modifications to the strut mount bolt holes.
Key benefits of the MINI R55 to R59 OMP Steel Front Strut Tower Brace include:
This product was last offered at the strikethrough price on
05-05-2026
This product was last offered at the strikethrough price on
05-05-2026
ECS E90 xDrive Lowering Spring Set Transform your E90’s handling and stance with our specially designed ECS Lowering Springs. Built to enhance both cornering capability and ride comfort, these springs provide a balanced drop between 1.0"-1.3", giving your vehicle a sportier profile while keeping a smooth, OEM-like ride. Experience a lower center of gravity for improved stability, enhanced steering feedback, and a sleek look that reduces unsightly wheel gap for a true performance appearance.
Why Choose ECS Lowering Springs?
Better Handling and Stability: By lowering the center of gravity, these springs reduce body roll and improve road grip, delivering precise control through corners. Performance-Driven Design: Linear spring rates tuned for sporty responsiveness without sacrificing comfort, making them ideal for daily driving. Durability You Can Trust: Finished with a flat black powder coating for excellent corrosion resistance, so they look great and last. Specifications
Lowering Range: Front 1.0"-1.2", Rear 1.2"-1.3" Spring Rate: Front 505 lbs/in, Rear 854 lbs/in Ideal for Daily Drivers and Enthusiasts: With rates slightly above factory specs, ECS Lowering Springs provide improved handling without the harshness typical of coilovers, making them perfect for drivers seeking a more refined, performance-focused setup. Take it a step further by adding wheel spacers to achieve the ultimate stance—browse our wide selection of options for the E90 xDrive to complete your suspension overhaul!
ECS Performance Rear Trailing Arm Set Say goodbye to suspension flex and unwanted geometry changes under load with our Performance Rear Trailing Arms, an upgrade engineered to enhance strength and handling precision. Factory steel trailing arms can flex and even fail under harsh conditions, but these trailing arms are built to stand the test of time. Lightweight, rigid, and built from solid 6061-T6 aluminum, these trailing arms offer improved stability and peace of mind, no matter how demanding the road.
Why Upgrade to ECS Rear Trailing Arms?
Engineered for Strength: Constructed from high-grade 6061-T6 aluminum, anodized for corrosion resistance, these arms are designed to last longer and handle tougher conditions than OEM steel arms. Lightweight and Strong: Each arm is 25% lighter than stock, weighing 384 grams versus the factory 517 grams, reducing unsprung weight for better performance. Easy DIY Installation: Designed to fit seamlessly, these trailing arms won’t alter alignment settings, making them a straightforward upgrade for enthusiasts and home mechanics alike. Enhanced Handling: With virtually no flex, they eliminate unwanted suspension changes, providing a smoother, more controlled ride. Kit Includes
Lowering Spring Set: Front and rear springs with precise lowering specs and premium powder coating. Rear Trailing Arms: A set of solid 6061-T6 aluminum trailing arms, ready for direct replacement, along with all necessary hardware. Bolt Torque Spec: 74 ft-lbs
This product was last offered at the strikethrough price on
05-05-2026
This product was last offered at the strikethrough price on
05-05-2026
F30/F32 RWD Lowering Springs:
Take your driving performance to the next level with ECS Tuning’s exclusive lowering springs for F30/F32 RWD models. These springs are engineered to optimize your car’s handling and visual appeal by lowering the ride height and delivering an aggressive, race-inspired stance. With an average drop of up to 1.8", you’ll experience sharper cornering, reduced body roll, and enhanced steering precision—all without sacrificing daily comfort.
Key Features:
Front Lowering: 1.6" - 1.8" Rear Lowering: 1.4" - 1.6" Lower Center of Gravity: Improves cornering stability and reduces body roll EDC Compatibility: Works seamlessly with electronic damping systems Linear Spring Design: A perfect balance of ride comfort and performance Durable Finish: Black powder coating with signature Turner red accents Proudly Made in the USA Unlike harsh coilover systems, our lowering springs provide a firmer yet comfortable ride, retaining street-friendly drivability while enhancing performance. Designed to bridge the gap between factory suspension and extreme coilovers, ECS springs are your ideal choice for performance tuning without compromise.
Flush Fitment Kit – Complete Your Look:
Achieve the perfect stance with our included flush kit. Push your wheels out for that aggressive, wide-body look while enhancing your handling with improved grip in corners. This kit includes 5mm front spacers and 15mm rear spacers with extended black wheel bolts, ensuring seamless integration with your OE-style wheels.
Elevate both your performance and aesthetics with ECS Tuning’s lowering springs and flush kit combo for your F30/F32. Don’t miss out on this special offer!
Made from aircraft grade aluminium, with stainless steels strut inserts and hardware for the ultimate in durability for street or track use. The built in reinforcement plate reduces the stress on the shock tower to reduce the chance of the shock towers tearing. With a maximum adjustment rang of -1.5 degrees camber per side, these plates will allow you to get your suspension right where you need it.
Fits the following BMW's:
1999-2006 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi M3
