BMW Drive Belts & V-Belts

S54 VAC Harmonic SuperDamper By ATI - Standard Size Crank Pulley ...

T#:639878

Part#: VAC-HPCDK-S54-ST

In Stock

$ 1,049.99 USD

Add to Wish List

Qty

$ 1,049.99 USD

Add to Wish List

If you are breaking crankshafts and oil pumps, the cause may be a mystery to you as it has been to many of our customers. We know that controlling the harmonic resonance of the BMW 6 is highly important as RPMs rise, but the ideal configuration of the inline-6 motor makes even experienced engine builders overlook some fundamental principals of engine harmonics that can be destructive. ATI Performance Products has partnered with VAC Motorsports to develop new dampers for BMW 2.5L, 2.8L, 3.0L and 3.2L straight-6 engines found in the E36 and E46 M3, E9X and E6X, as well as newer Z3s and Z4s. These dampers eliminate crankshaft harmonic vibration, which allows the engine to produce more horsepower and torque, while also reducing internal engine wear at the same time. Broken oil pumps and timing chains will be a thing of the past! When used with a VAC accessory pulley, these dampers are a direct replacement over the OEM balancer. They have a 7” outer diameter and include OEM style timing alignment tabs. BMW enthusiasts should know that all ATI Super Dampers exceed SFI 18.1 Safety Certification and are approved for competition. The advantages of the ATI SuperDamper include eliminating vibration issues with inline 6 engines equipped with lightweight clutch and flywheel assemblies, reduced bearing, engine accessories, oil pump wear, and compatibility with underdrive pulleys. Made in the USA.

Show More Show Less

VAC Harmonic S55 SuperDamper By ATI

T#:639880

Part#: VAC-HPCD-S55

Ships in 2 Business Days

$ 989.99 USD

Add to Wish List

Qty

$ 989.99 USD

Add to Wish List

If you are breaking crankshafts and oil pumps, the cause may be a mystery to you as it has been to many of our customers. We know that controlling the harmonic resonance of the BMW 6 is highly important as RPMs rise, but the ideal configuration of the inline-6 motor makes even experienced engine builders overlook some fundamental principals of engine harmonics that can be destructive. ATI Performance Products has partnered with VAC Motorsports to develop new dampers for BMW 2.5L, 2.8L, 3.0L and 3.2L straight-6 engines found in the E36 and E46 M3, E9X and E6X, as well as newer Z3s and Z4s. These dampers eliminate crankshaft harmonic vibration, which allows the engine to produce more horsepower and torque, while also reducing internal engine wear at the same time. Broken oil pumps and timing chains will be a thing of the past! When used with a VAC accessory pulley, these dampers are a direct replacement over the OEM balancer. They have a 7” outer diameter and include OEM style timing alignment tabs. BMW enthusiasts should know that all ATI Super Dampers exceed SFI 18.1 Safety Certification and are approved for competition. The advantages of the ATI SuperDamper include eliminating vibration issues with inline 6 engines equipped with lightweight clutch and flywheel assemblies, reduced bearing, engine accessories, oil pump wear, and compatibility with underdrive pulleys. Includes lightweight VAC Billet Crankshaft Pulley. Made in the USA.

Show More Show Less

VAC V2 Harmonic SuperDamper By ATI - BMW N54 3.0L

T#:639879

Part#: VAC-HPCD-N54

In Stock

$ 1,059.99 USD

Add to Wish List

Qty

$ 1,059.99 USD

Add to Wish List

If you are breaking crankshafts and oil pumps, the cause may be a mystery to you as it has been to many of our customers. We know that controlling the harmonic resonance of the BMW 6 is highly important as RPMs rise, but the ideal configuration of the inline-6 motor makes even experienced engine builders overlook some fundamental principals of engine harmonics that can be destructive. ATI Performance Products has partnered with VAC Motorsports to develop new dampers for BMW 2.5L, 2.8L, 3.0L and 3.2L straight-6 engines found in the E36 and E46 M3, E9X and E6X, as well as newer Z3s and Z4s. These dampers eliminate crankshaft harmonic vibration, which allows the engine to produce more horsepower and torque, while also reducing internal engine wear at the same time. Broken oil pumps and timing chains will be a thing of the past! When used with a VAC accessory pulley, these dampers are a direct replacement over the OEM balancer. They have a 7” outer diameter and include OEM style timing alignment tabs. BMW enthusiasts should know that all ATI Super Dampers exceed SFI 18.1 Safety Certification and are approved for competition. The advantages of the ATI SuperDamper include eliminating vibration issues with inline 6 engines equipped with lightweight clutch and flywheel assemblies, reduced bearing, engine accessories, oil pump wear, and compatibility with underdrive pulleys. Includes lightweight VAC Billet Crankshaft Pulley.

Show More Show Less

ALTA Crank Pulley - 0% (Stock Size) MINI W11 1.6L Engine

T#:394899

Part#: AMPENG500

In Stock

$ 129.99 USD

Add to Wish List

Qty

$ 129.99 USD

Add to Wish List

ALTA Lightweight Crank Pulley (LCP) for Mini

Upgrade your Mini's performance with the ALTA Lightweight Crank Pulley (LCP), designed to increase horsepower and torque. Available in two sizes - 0% Stock Sized and +2% Oversized - this pulley is engineered for Supercharged Cooper S models. Crafted from 6061T6 aluminum, the ALTA pulley is lightweight, weighing just 0.65 lbs, providing a weight reduction of over 2.3 lbs compared to the stock crank pulley.

Increases horsepower and torque
Lightweight design reduces rotational mass
Does not wear out engine bearings or oil pump
Adds boost safely and reliably
Improves belt contact with pulleys, reducing wear

Show More Show Less

VAC Harmonic SuperDamper By ATI - BMW S50B32 EURO

T#:7355606

Part#: HPCDK-S50B32-S

Ships in 4 Business Days

$ 1,099.99 USD

Add to Wish List

Qty

$ 1,099.99 USD

Add to Wish List

VAC M62 Underdrive Power Pulley Set (09/1998+)

T#:928436

Part#: VAC-UPPS-M62-99

Ships in 9 Business Days

$ 329.99 USD

Add to Wish List

Qty

$ 329.99 USD

Add to Wish List

VAC Underdrive Power Pulley Sets for the M60 release 8.5 horsepower @ 5800 RPM and 8 lb/ft of torque @ 4500 RPM (measured @ the wheels.) Always made using only virgin billet 6061 T6 aluminum, an anodized finish, and the tightest tolerances; VAC's pulleys are used on some of the fastest BMWs on the planet. A lightweight design optimizes performance and response while under-driving components just the right amount for proper function at all RPMs.

Show More Show Less

VAC Harmonic SuperDamper By ATI - M50/S50/M52/S52

T#:639877

Part#: VAC-HPCD-M50-TR

Ships on Sep 1, 2026

$ 1,139.99 USD

Add to Wish List

Qty

$ 1,139.99 USD

Add to Wish List

If you are breaking crankshafts and oil pumps, the cause may be a mystery to you as it has been to many of our customers. We know that controlling the harmonic resonance of the BMW 6 is highly important as RPMs rise, but the ideal configuration of the inline-6 motor makes even experienced engine builders overlook some fundamental principals of engine harmonics that can be destructive. ATI Performance Products has partnered with VAC Motorsports to develop new dampers for BMW 2.5L, 2.8L, 3.0L and 3.2L straight-6 engines found in the E36 and E46 M3 as well as newer Z3s and Z4s. These dampers eliminate crankshaft harmonic vibration, which allows the engine to produce more horsepower and torque, while also reducing internal engine wear at the same time. Broken oil pumps and timing chains will be a thing of the past! When used with a VAC accessory pulley, these dampers are a direct replacement over the OEM balancer. They have a 7” outer diameter and include OEM style timing alignment tabs. BMW enthusiasts should know that all ATI Super Dampers exceed SFI 18.1 Safety Certification and are approved for competition. The advantages of the ATI SuperDamper include eliminating vibration issues with inline 6 engines equipped with lightweight clutch and flywheel assemblies, reduced bearing, engine accessories, oil pump wear, and compatibility with underdrive pulleys. Kit includes: Damper Lightweight VAC Billet Crankshaft Pulley Mounting and Installation Hardware Trigger Ring for OBD1 systems Note: Will NOT work with S50B30 & S50B32 Euro Engines, For Street/Track cars with Air Conditioning, the Additional A/C Pulley Option is REQUIRED as the OE A/C pulley is not compatible. The additional mounting and installation hardware is also included. Made in the USA

Show More Show Less

VAC Underdrive Power Pulley Set - S14

T#:598754

Part#: VAC-UPPS-S14-3-G

Ships on Sep 1, 2026

$ 334.99 USD

Add to Wish List

Qty

$ 334.99 USD

Add to Wish List

Made using only virgin billet aluminum, a hard anodized finish, and the tightest tolerances, VAC's pulley sets are used on some of the fastest S14s on the planet. This lightweight design optimizes performance and response while under-driving components just the right amount for proper function. Perfect for track cars, they can also be used on a street car without any problems. Features: Reduces pump cavitation at higher rpm's Saves weight when every bit counts Includes new, correct length, labeled Contitech belts for WP, ALT, P/S

Show More Show Less

Project Cars

SELECT YOUR BMW

Sub-Categories

S54 VAC Harmonic SuperDamper By ATI - Standard Size Crank Pulley ...

VAC Harmonic S55 SuperDamper By ATI

VAC V2 Harmonic SuperDamper By ATI - BMW N54 3.0L

ALTA Crank Pulley - 0% (Stock Size) MINI W11 1.6L Engine

ALTA Lightweight Crank Pulley (LCP) for Mini

VAC Harmonic SuperDamper By ATI - BMW S50B32 EURO

VAC M62 Underdrive Power Pulley Set (09/1998+)

VAC Harmonic SuperDamper By ATI - M50/S50/M52/S52

VAC Underdrive Power Pulley Set - S14

Select Vehicle

Purpose

Category

Brand

Price

Shipping

Narrow Results