BMW Electrical Sensors, Switches, & Relays

Oil Level Sensor - E46 E39 E60 E38 X3 X5 Z3 Z4 Z8

10X Entries Into Our F80 M3 Sweepstakes

T#:395203

Part#: 12617508003

In Stock

Sale - Save 7% $ 62.99

This product was last offered at the strikethrough price on
05-02-2026

$ 58.49 USD

Add to Wish List

Qty

Sale - Save 7%

$ 62.99

This product was last offered at the strikethrough price on
05-02-2026

$ 58.49 USD

Add to Wish List

This is the oil level sensor / sender for BMW E46 E39 E60 E38 X3 X5 Z3 Z4 Z8.When this part fails it will illuminate a check light on the dash which indicates it needs to be replaced. Includes o-ring. This item fits the following BMWs: 1999-2005 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330xi M3 2008+ E90 BMW 335d 1999-2003 E39 BMW 528i 525i 530i M5 1998-2003 E39 BMW 540i 2004-2005 E60 BMW 525i 530i 1998-2001 E38 BMW 740i 740il 750il 2004-2006 E85 BMW X3 2.5i X3 3.0i 2000-2006 E53 BMW X5 3.0i 2000-2003 E53 BMW X5 4.4i X5 4.6is 1999-2002 Z3 BMW Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i 2001-2002 Z3 BMW Z3 M Roadster Z3 M Coupe 2003-2006 Z4 BMW Z4 2.5i Z4 3.0i 2000-2003 E52 BMW Z8

Show More Show Less

Motiv ReFlex+ for BMW

T#:17970629

Part#: RFXF02UI6

In Stock

$ 859.00 USD

Add to Wish List

Qty

$ 859.00 USD

Add to Wish List

The MOTIV ReFlex+ is an Advanced I/O Integration module allowing a level of precise control of auxiliary components. In addition, the ReFlex can incorporate external data into the factory DME/ECU in parallel through optional CANbus integration. Utilizing the CANbus option, multiple digital and analog signals can be used by the DME/ECU for safety, data logging, or adaptive tuning features. It is unique in its ability to function as a separate standalone, as well as a parallel module in conjunction with the DME/ECU. The ReFlex provides the most accurate and precise supplementary sequential fuel injection with the ability to control other advanced features all in one place. It brings a new level of control, function, and versatility to tuning any modern-day vehicle. Preset crank and cam trigger for most modern-day BMW engines, as well as fully configurable triggers to be synched on any vehicle application. Configurable to operate on 4, 5, 6, and 8-cylinder engines. 3 Point MAP sensor calibration table makes it configurable for almost any MAP or TMAP sensor. Sequential Port Injection with the ability to sense individual injector failures on 4 to 8-cylinder engines. Built-in Ethanol Content Analyzer. The Re|Flex firmware and XDFs include ethanol compensation tables to scale properly for varying ethanol % based on real-time input from the sensor. 2x Additional Outputs. These outputs have 12x12 resolution tables for control in TunerPro R/T. These can be configured to run as on/off, digital, frequency (25hz), or PID. Boost Control WGDC Methanol Solenoid Control PWM (for use with valves such as the Aquamist FAV and the ProMeth Pulse Valve) Nitrous Solenoid Control PWM Auxiliary fuel pump relay trigger 2x Inputs Ethanol Content Sensor Fuel Pressure Sensor (0-10bar) Oil Pressure (0-10bar) Coolant Pressure (0-10bar) EGBP/EMAP (0-10bar) CANbus (not required) enabled communication for the transmission and receiving of digital signals for fully DME/ECU integrated control of external modifications. The CANbus communications also allow for data and errors to be transmitted to and from the vehicle's engine control computer in order to add safeguards and implement engine trips and fail safes. Logging via OBDII is still fully functional and is not affected at all by the communication with the Re|Flex. Some of the developments underway include: Error reporting to and from factory ECU for unparalleled safety Output WGDC by converting an EWG signal to a more conventional DC output for controlling standard 3port and 4port boost solenoids for use with external WG’s The ability to datalog non-factory parameters such as ethanol content, additional pressure sensor, PI IDC, and more! These features make the Re|Flex the most powerful and safest supplementary and auxiliary controller on the market. However, this is only the beginning. As flash platforms find the need for more accessories to control, the Re|Flex was designed to be updated easily by the end user in order to add functionality as it is developed.

Show More Show Less

BMW B46 B48 B58 Motiv ReFlex 0-10 Bar Pressure Sensor

T#:28537533

Part#: 101-0216

In Stock

$ 105.00 USD

Add to Wish List

Qty

$ 105.00 USD

Add to Wish List

BMW B46 B48 B58 Motiv ReFlex 0-10 Bar Pressure Sensor is designed for accurate measurement of fluid and air pressure in high-performance applications. Ideal for monitoring a variety of pressures including fuel, boost, coolant, and oil, this sensor provides crucial data for optimizing vehicle performance.

Featuring a 2-Pin DTM connector, this sensor offers a direct plug-and-play connection to the ReFlex+ harness, ensuring a seamless integration with flash platforms via CANbus. Each ReFlex+ unit can support up to two of these sensors, allowing for comprehensive monitoring.

Versatile Measurement: Capable of measuring fuel pressure, boost, coolant, oil, and other fluids.
Easy Integration: 2-Pin DTM connector provides a direct plug-and-play connection.
Comprehensive Monitoring: Supports integration of up to two sensors per ReFlex+ unit.
High-Performance Design: Designed to handle high pressures and deliver accurate readings.

For optimal installation, consider using the 3/8 Female to 3/8 Male SAE Quick Disconnect Adapter with a 1/8" NPT port on an ethanol sensor or the 5/16 Female to 5/16 Male SAE Quick Disconnect Adapter with a 1/8" NPT port on a factory fuel line. Please note that the ethanol sensor is not included.

Show More Show Less

BMW B46 B48 Motiv ReFlex Plug-n-Play Ethanol Sensor Harness

T#:22723690

Part#: 101-0212

In Stock

$ 49.00 USD

Add to Wish List

Qty

$ 49.00 USD

Add to Wish List

BMW B46 B48 Motiv ReFlex Plug-n-Play Ethanol Sensor Harness simplifies the integration of an ethanol content sensor into your BMW's Re|Flex system. This harness is designed to enhance your vehicle's performance by scaling the sequential port injection based on real-time ethanol content, eliminating the need for manual adjustments. Key benefits include:

Effortless Installation: Plug-n-play design makes it easy to connect an ethanol content sensor without extensive modifications.
Real-Time Adjustments: Allows for automatic scaling of port injection based on real-time ethanol content, optimizing engine performance.
Seamless Integration: For CANbus integrated vehicles, it facilitates integration with the factory DME/ECU (pending feature release by tuning platforms).
No Manual Flashes Required: Removes the need for ground disconnection or map switching on your port injection controller.

Please note that the ethanol sensor is not included with this harness.

Show More Show Less

Camshaft Position Sensor - Priced Each

10X Entries Into Our F80 M3 Sweepstakes

T#:27105154

Part#: 13627525014

In Stock

Sale - Save 17% $ 41.99

This product was last offered at the strikethrough price on
05-03-2026

$ 34.84 USD

Add to Wish List

Qty

Sale - Save 17%

$ 41.99

This product was last offered at the strikethrough price on
05-03-2026

$ 34.84 USD

Add to Wish List

Bremmen Crankshaft Position Sensor - E36 E46 E39 E60 X3 X5 Z3 Z4 ...

10X Entries Into Our F80 M3 Sweepstakes

T#:640146

Part#: 12141709616

In Stock

Sale - Save 10% $ 39.99

This product was last offered at the strikethrough price on
05-03-2026

$ 35.99 USD

Add to Wish List

Qty

Sale - Save 10%

$ 39.99

This product was last offered at the strikethrough price on
05-03-2026

$ 35.99 USD

Add to Wish List

This is the crank shaft position sensor. It provides information for the ECU. A faulty sensor can cause issues with timing adjustment and limit performance and vehicle operation. Replace your sensor with a high-quality Bremmen sensor to restore peak performance.

Show More Show Less

BMW B58 3.0L ReFlex+ Main Injector Harness - Inline-6

T#:29201081

Part#: 900.1008

In Stock

$ 200.00 USD

Add to Wish List

Qty

$ 200.00 USD

Add to Wish List

BMW B58 3.0L ReFlex+ Main Injector Harness - Inline-6 offers a seamless integration solution for your turbocharged BMW inline-6 engine. Designed to work with the Motive ReFlex Control Unit, this plug-n-play harness ensures a hassle-free installation process for your 6 EV6/USCAR injectors.

Direct Plug-N-Play Installation: Connects directly to the ReFlex+ Control Unit and your EV6/USCAR injectors.
Versatile Connector Options: Includes DTM 3-Pin and 2-Pin connectors for integration with ethanol content sensors and external sensors.
Multiple Sensor Connectors: Features connections for a 0-10 Bar Pressure Sensor and a 0-5v sensor.
Auxiliary Output Wires: Provides 3x unterminated wires for additional low-side triggers from the ReFlex+ Control Unit.
Easy Connection: DTM 8-Pin connector allows for straightforward setup with ReFlex+ Install Harnesses.

Turner Motorsport's harness ensures efficient and reliable performance, streamlining the process of integrating your ReFlex+ Control Unit with your BMW B58 engine.

Show More Show Less

Engine Oil Temperature Sensor

10X Entries Into Our F80 M3 Sweepstakes

T#:36777927

Part#: 13627580635

In Stock

Sale - Save 21% $ 26.99

This product was last offered at the strikethrough price on
05-03-2026

$ 21.21 USD

Add to Wish List

Qty

Sale - Save 21%

$ 26.99

This product was last offered at the strikethrough price on
05-03-2026

$ 21.21 USD

Add to Wish List

Motiv ReFlex+ Control Unit

T#:29101684

Part#: 900.1001

In Stock

$ 729.00 USD

Add to Wish List

Qty

$ 729.00 USD

Add to Wish List

The motive ReFlex+ Control Unit is an advanced I/O integration module that allows precise control of aftermarket components and sends data to the factory DME (ECU) via CANbus communication, expanding performance tuning capabilities. This control unit allows for precise control of fuel pumps, methanol injection kits, nitrous kits, boost controllers, relay triggers, port injection systems, flex fuel systems, and more. Supporting sequential port injection for up to eight injectors and real-time monitoring of injectors, this unit is a great choice for precise control of fuel delivery to your engine.

Show More Show Less

Camshaft Position Sensor - E46 M3, Z4M, Z3M S54

10X Entries Into Our F80 M3 Sweepstakes

T#:36913379

Part#: 12147539171

In Stock

Sale - Save 15% $ 91.99

This product was last offered at the strikethrough price on
09-16-2026

$ 78.19 USD

Add to Wish List

Qty

Sale - Save 15%

$ 91.99

This product was last offered at the strikethrough price on
09-16-2026

$ 78.19 USD

Add to Wish List

The camshaft position sensor is essential for assisting the engine DME by monitoring the camshaft's position. The data from this sensor is key to optimizing ignition timing and ensuring smooth engine performance.

Often referred to as the CMP sensor, this component is crucial for the overall functionality of the powertrain. A failing camshaft position sensor can cause a range of issues, including engine stumbling, hesitation during acceleration, power loss, and even starting difficulties or complete failure to start.

Show More Show Less

Motiv ReFlex Lite: Advanced Sequential Injector Controller - Inline-6...

T#:29234298

Part#: 910.1011

In Stock

$ 479.00 USD

Add to Wish List

Qty

$ 479.00 USD

Add to Wish List

The ReFlex LITE is a simple yet elegant fueling solution for direct injected vehicles that need to add more fuel by installing a port injection system to keep up with their modifications to the vehicle. Using the same precise form of sequential fuel injection as the ReFlex+, the ReFlex LITE brings a more affordable fuel controller without the additional features of the ReFlex+. Sequential port fuel injection for inline-6 engines Firmware and maps are available for multiple vehicles FREE on our website High resolution calibration tables 24x24 cell RPM vs MAP 0-48psi MAP pressure range 250RPM increments up to 8500RPM High resolution datalogging Fault detection status available to monitor in TunerPRO RT Compact in size Universal fitment Simple installation Please Note: The ReFlex LITE does NOT have the ability to analyze and transmit ethanol content to an ECU.

Show More Show Less

Crankshaft Position Sensor

10X Entries Into Our F80 M3 Sweepstakes

T#:36913357

Part#: 12141720856

In Stock

Sale - Save 20% $ 42.99

This product was last offered at the strikethrough price on
05-03-2026

$ 34.26 USD

Add to Wish List

Qty

Sale - Save 20%

$ 42.99

This product was last offered at the strikethrough price on
05-03-2026

$ 34.26 USD

Add to Wish List

Eccentric Shaft Sensor

10X Entries Into Our F80 M3 Sweepstakes

T#:34114242

Part#: 11377524879

In Stock

Sale - Save 20% $ 165.99

This product was last offered at the strikethrough price on
05-03-2026

$ 132.18 USD

Add to Wish List

Qty

Sale - Save 20%

$ 165.99

This product was last offered at the strikethrough price on
05-03-2026

$ 132.18 USD

Add to Wish List

MSD80 Replacement Mosfets - Pack of 10

10X Entries Into Our F80 M3 Sweepstakes

T#:28537553

Part#: MSD80FIX

In Stock

Sale - Save 11% $ 37.99

This product was last offered at the strikethrough price on
05-03-2026

$ 33.84 USD

Add to Wish List

Qty

Sale - Save 11%

$ 37.99

This product was last offered at the strikethrough price on
05-03-2026

$ 33.84 USD

Add to Wish List

Are you tired of worrying about your MSD80 DME's Mosfets failing? Why replace your MSD80 with a costly MSD81 and worry about paying for a new tuning license, when you can simply repair your MSD80 DME at home to last for many years to come! Included in this kit: -10 MSD80 Replacement Mosfets Applicable Only to Vehicles Equipped With the MSD80 DME (not MSD81). Bremmen Parts offers an OE-like replacement to remedy the following DME-related codes: 30BA - DME Digital Motor Electronics, Internal Failure 30BB - DME Digital Motor Electronics, Internal Failure 29D9 - Misfire with Low Fuel Level 29CC - Misfire Multiple Cylinders 29CD - Cylinder 1 Misfire 29CE - Cylinder 2 Misfire 29CF - Cylinder 3 Misfire 29D0 - Cylinder 4 Misfire 29D1 - Cylinder 5 Misfire 29D2 - Cylinder 6 Misfire

Show More Show Less

ReFlex+ Install Harness - Flying Lead

T#:29201083

Part#: 900.1016

In Stock

$ 95.00 USD

Add to Wish List

Qty

$ 95.00 USD

Add to Wish List

A flying lead harness is a wiring harness that is unterminated at one end and has an excess length of wire so that installation can be customized by the end user. That makes this section of the ReFlex+ Install Harness truly universal. On one end, this harness has an 8-pin connector to plug into any one of our ReFlex+ Main Injector Harnesses. The other end of each wire is unterminated and will be connected to the appropriate sensor, ground, or power supply based on installation instructions. Each harness has a wire for: Switched +12v Input w/ inline fuse +5v Input Ground Can HI Can Lo Cam Sensor Signal Crank Sensor Signal Map Sensor Signal

Show More Show Less

Bremmen Camshaft Position Sensor - E46 E39 E60 E83 Z3 Z4

10X Entries Into Our F80 M3 Sweepstakes

T#:640145

Part#: 12147518628

Ships on Dec 16, 2026

Sale - Save 16% $ 31.99

This product was last offered at the strikethrough price on
05-03-2026

$ 26.87 USD

Add to Wish List

Qty

Sale - Save 16%

$ 31.99

This product was last offered at the strikethrough price on
05-03-2026

$ 26.87 USD

Add to Wish List

A bad cam sensor can cause a variety of problems from hard starting to stalling at low speeds. Cam sensor replacement has been known to cure many drivability issues

N62 Eccentric Shaft Sensor - 11377527017

10X Entries Into Our F80 M3 Sweepstakes

T#:36981071

Part#: 11377527017

Ships on Apr 1, 2027

Sale - Save 20% $ 172.99

This product was last offered at the strikethrough price on
05-03-2026

$ 137.90 USD

Add to Wish List

Qty

Sale - Save 20%

$ 172.99

This product was last offered at the strikethrough price on
05-03-2026

$ 137.90 USD

Add to Wish List

Ensure smooth engine operation in your BMW N62 N73 Engines with this Bremmen Parts Eccentric Shaft Sensor. Designed to detect valve position and lift adjusted by the Valvetronic motor, this sensor prevents poor cold-start issues and rough idle caused by valve lift failure. Avoid potential limp mode situations with this reliable replacement sensor, which also requires a valve cover gasket replacement for proper installation.

Key Benefits:

Detects valve position and lift for optimal engine performance Prevents poor cold-start issues and rough idle Avoids potential limp mode situations Compatible with N62 N73 Engines

Show More Show Less

Knock Sensor (Ping Sensor) - 13627568421

10X Entries Into Our F80 M3 Sweepstakes

T#:36913356

Part#: 13627568421

In Stock

Sale - Save 25% $ 75.99

This product was last offered at the strikethrough price on
05-03-2026

$ 56.99 USD

Limited Qty Sale

Add to Wish List

Qty

Sale - Save 25%

$ 75.99

This product was last offered at the strikethrough price on
05-03-2026

$ 56.99 USD

Limited Qty Sale

Add to Wish List

Maintain optimal engine performance with this premium replacement knock sensor, engineered to detect pinging, knocking, and pre-detonation within your engine. By precisely monitoring these vibrations, the sensor enables the engine control unit (ECU) to fine-tune ignition timing, safeguarding your engine and enhancing overall efficiency.

A malfunctioning knock sensor can result in diminished power, reduced fuel efficiency, and potential engine damage. Restore your engine's functionality and reliability with this high-quality knock sensor from Bremmen Parts, designed for long-lasting performance and peace of mind.

Show More Show Less

ReFlex+ Plug-N-Play Harness Kit - Tensility Motorsport

T#:29201085

Part#: 200.1058

Ships in 5 Business Days

$ 794.00 USD

Add to Wish List

Qty

$ 794.00 USD

Add to Wish List

Tensility Motorsports has developed a plug and play kit for the ReFlex+ that was engineered to meet our high quality standards. TMS has been approved by MOTIV to manufacturer harnesses and they will not void your warranty on MOTIV ReFlex+ products.Â With attention to detail in the selection of wiring, production standards, and quality assurance, TMS plug and play harnesses ensure a consistent and reliable installation for a hassle-free experience. Each harness kit includes all the necessary components to install and run a ReFlex+ Advanced I/O Controller on the vehicle it was designed for. The harness is divided into a few separate pieces for ease of installation and a very clean finished look. Main Harness: This section of the TMS harness kit includes plug and play connections to the vehicles Cam, Crank, and TMAP sensors, 6 injector runs for port injection, the ethanol content sensor connector, and DTM connections for all of the auxiliary inputs and outputs. CAN+ Power Splitter: A clean over-molded compact harness that provides a plug and play connection to your vehicles Body Domain Controller. This section is where the kit will get power, ground, and connect to the CANbus network. Auxiliary Cable Pack: Four additional cables are included to simplify future expansions such as additional sensors, methanol, NOS, fuel pump relays, etc. These 8 ft. cables plug directly into the unused ReFlex+ harness auxiliary ports Aux Out 1/2/3 and Aux In 4 (PSI).

Show More Show Less

ReFlex Lite Injector Harness - Inline-6

T#:29234311

Part#: 900.1013

Ships in 5 Business Days

$ 155.00 USD

Add to Wish List

Qty

$ 155.00 USD

Add to Wish List

Required when installing a Motiv ReFlex Lite to your inline-6 powered BMW! Includes x6 injector leads and direct, plug-in adapter to the ReFlex Lite Control Unit!

Motiv ReFlex+

T#:29101668

Part#: 910.1001

Ships in 5 Business Days

$ 849.00 USD

Add to Wish List

Qty

$ 849.00 USD

Add to Wish List

The MOTIV ReFlex+ is an Advanced I/O Integration module allowing a level of precise control of auxiliary components. In addition, the ReFlex can incorporate external data into the factory DME/ECU in parallel through optional CANbus integration. Utilizing the CANbus option, multiple digital and analog signals can be used by the DME/ECU for safety, data logging, or adaptive tuning features. It is unique in its ability to function as a separate standalone, as well as a parallel module in conjunction with the DME/ECU. The ReFlex provides the most accurate and precise supplementary sequential fuel injection with the ability to control other advanced features all in one place. It brings a new level of control, function, and versatility to tuning any modern-day vehicle. Preset crank and cam trigger for most modern-day BMW engines, as well as fully configurable triggers to be synched on any vehicle application. Configurable to operate on 4, 5, 6, and 8-cylinder engines. 3 Point MAP sensor calibration table makes it configurable for almost any MAP or TMAP sensor. Sequential Port Injection with the ability to sense individual injector failures on 4 to 8-cylinder engines. Built-in Ethanol Content Analyzer. The Re|Flex firmware and XDFs include ethanol compensation tables to scale properly for varying ethanol % based on real-time input from the sensor. 2x Additional Outputs. These outputs have 12x12 resolution tables for control in TunerPro R/T. These can be configured to run as on/off, digital, frequency (25hz), or PID. Boost Control WGDC Methanol Solenoid Control PWM (for use with valves such as the Aquamist FAV and the ProMeth Pulse Valve) Nitrous Solenoid Control PWM Auxiliary fuel pump relay trigger 2x Inputs Ethanol Content Sensor Fuel Pressure Sensor (0-10bar) Oil Pressure (0-10bar) Coolant Pressure (0-10bar) EGBP/EMAP (0-10bar) CANbus (not required) enabled communication for the transmission and receiving of digital signals for fully DME/ECU integrated control of external modifications. The CANbus communications also allow for data and errors to be transmitted to and from the vehicle's engine control computer in order to add safeguards and implement engine trips and fail safes. Logging via OBDII is still fully functional and is not affected at all by the communication with the Re|Flex. Some of the developments underway include: Error reporting to and from factory ECU for unparalleled safety Output WGDC by converting an EWG signal to a more conventional DC output for controlling standard 3port and 4port boost solenoids for use with external WG’s The ability to datalog non-factory parameters such as ethanol content, additional pressure sensor, PI IDC, and more! These features make the Re|Flex the most powerful and safest supplementary and auxiliary controller on the market. However, this is only the beginning. As flash platforms find the need for more accessories to control, the Re|Flex was designed to be updated easily by the end user in order to add functionality as it is developed.

Show More Show Less

ReFlex Lite Injector Harness - Inline-4

T#:29234303

Part#: 900.1012

Ships in 5 Business Days

$ 140.00 USD

Add to Wish List

Qty

$ 140.00 USD

Add to Wish List

Required when installing a Motiv ReFlex Lite to your inline-4 powered BMW! Includes x4 injector leads and direct, plug-in adapter to the ReFlex Lite Control Unit!

Bremmen Parts Outdoor Temperature Sensor / Probe - 65816936953 ...

10X Entries Into Our F80 M3 Sweepstakes

T#:30728992

Part#: 65816936953

In Stock

Sale - Save 24% $ 13.99

This product was last offered at the strikethrough price on
05-03-2026

$ 10.67 USD

Add to Wish List

Qty

Sale - Save 24%

$ 13.99

This product was last offered at the strikethrough price on
05-03-2026

$ 10.67 USD

Add to Wish List

ReFlex+ Install Kit

T#:29267513

Part#: 400.1001

In Stock

$ 15.00 USD

Add to Wish List

Qty

$ 15.00 USD

Add to Wish List

Crankshaft Position Sensor With Seal

10X Entries Into Our F80 M3 Sweepstakes

T#:599549

Part#: 12141485844

In Stock

Sale - Save 15% $ 14.99

This product was last offered at the strikethrough price on
09-16-2026

$ 12.74 USD

Add to Wish List

Qty

Sale - Save 15%

$ 14.99

This product was last offered at the strikethrough price on
09-16-2026

$ 12.74 USD

Add to Wish List

Camshaft Sensor - 13627588095

10X Entries Into Our F80 M3 Sweepstakes

T#:36913377

Part#: 13627588095

In Stock

Sale - Save 15% $ 28.99

This product was last offered at the strikethrough price on
09-16-2026

$ 24.64 USD

Add to Wish List

Qty

Sale - Save 15%

$ 28.99

This product was last offered at the strikethrough price on
09-16-2026

$ 24.64 USD

Add to Wish List

Ensure precise timing in your BMW engine with this Camshaft Gear Sensor, also known as the "pulse generator". Designed to mount on the side of the cylinder head, this sensor accurately detects camshaft timing. When an engine fault code related to timing emerges, replacement of this sensor becomes essential for optimal engine performance.

Benefits:

Ensures precise timing detection Vital for engine fault code related to timing Mounts to the side of the cylinder head Essential for BMW engine performance

Show More Show Less

Starter Motor

10X Entries Into Our F80 M3 Sweepstakes

T#:55030826

Part#: 12412354693

In Stock

Sale - Save 10% $ 129.99

This product was last offered at the strikethrough price on
10-08-2026

$ 116.99 USD

Add to Wish List

Qty

Sale - Save 10%

$ 129.99

This product was last offered at the strikethrough price on
10-08-2026

$ 116.99 USD

Add to Wish List

ReFlex Lite Injector Harness - V8

T#:29234314

Part#: 900.1014

Ships in 5 Business Days

$ 295.00 USD

Add to Wish List

Qty

$ 295.00 USD

Add to Wish List

Required when installing a Motiv ReFlex Lite to your V8 powered BMW! Includes x8 injector leads and direct, plug-in adapter to the ReFlex Lite Control Unit!

ReFlex+ Plug-N-Play Harness Kit - Visconti Tuning

T#:29201087

Part#: 200.1103

Ships in 5 Business Days

$ 615.00 USD

Add to Wish List

Qty

$ 615.00 USD

Add to Wish List

Visconti Tuning teamed up with MOTIV as the first company to bring a plug-and-play harness to the community. After years of success and some of the fastest Supras and BMWs in the world using the harness, Visconti Tuning has improved upon an already fantastic offering.

Show More Show Less

ReFlex Lite: Advanced Sequential Injector Controller - V8

T#:29234300

Part#: 910.1012

Ships in 5 Business Days

$ 499.00 USD

Add to Wish List

Qty

$ 499.00 USD

Add to Wish List

The ReFlex LITE is a simple yet elegant fueling solution for direct injected vehicles that need to add more fuel by installing a port injection system to keep up with their modifications to the vehicle. Using the same precise form of sequential fuel injection as the ReFlex+, the ReFlex LITE brings a more affordable fuel controller without the additional features of the ReFlex+. Sequential port fuel injection for v-8 engines Firmware and maps are available for multiple vehicles FREE on our website High resolution calibration tables 24x24 cell RPM vs MAP 0-48psi MAP pressure range 250RPM increments up to 8500RPM High resolution datalogging Fault detection status available to monitor in TunerPRO RT Compact in size Universal fitment Simple installation Please Note: The ReFlex LITE does NOT have the ability to analyze and transmit ethanol content to an ECU.

Show More Show Less

Camshaft Speed Sensor

10X Entries Into Our F80 M3 Sweepstakes

T#:52832891

Part#: 12141743072

In Stock

Sale - Save 23% $ 39.99

This product was last offered at the strikethrough price on
05-03-2026

$ 30.99 USD

Limited Qty Sale

Add to Wish List

Qty

Sale - Save 23%

$ 39.99

This product was last offered at the strikethrough price on
05-03-2026

$ 30.99 USD

Limited Qty Sale

Add to Wish List

Relay - Black

10X Entries Into Our F80 M3 Sweepstakes

T#:5484757

Part#: 61366901469

Special Order: No Guaranteed ETA

Sale - Save 24% $ 13.99

This product was last offered at the strikethrough price on
05-03-2026

$ 10.60 USD

Add to Wish List

Qty

Sale - Save 24%

$ 13.99

This product was last offered at the strikethrough price on
05-03-2026

$ 10.60 USD

Add to Wish List

Positive Cable Battery Connection Pole

10X Entries Into Our F80 M3 Sweepstakes

T#:57616371

Part#: 61129217031

Ships on Jan 11, 2027

Sale - Save 10% $ 135.99

This product was last offered at the strikethrough price on
10-08-2026

$ 122.39 USD

Add to Wish List

Qty

Sale - Save 10%

$ 135.99

This product was last offered at the strikethrough price on
10-08-2026

$ 122.39 USD

Add to Wish List

ReFlex Lite: Advanced Sequential Injector Controller - Inline-4 ...

T#:29234292

Part#: 910.1010

Back Ordered

$ 469.00 USD

Add to Wish List

Qty

$ 469.00 USD

Add to Wish List

The ReFlex LITE is a simple yet elegant fueling solution for direct injected vehicles that need to add more fuel by installing a port injection system to keep up with their modifications to the vehicle. Using the same precise form of sequential fuel injection as the ReFlex+, the ReFlex LITE brings a more affordable fuel controller without the additional features of the ReFlex+. Sequential port fuel injection for inline-4 engines Firmware and maps are available for multiple vehicles FREE on our website High resolution calibration tables 24x24 cell RPM vs MAP 0-48psi MAP pressure range 250RPM increments up to 8500RPM High resolution datalogging Fault detection status available to monitor in TunerPRO RT Compact in size Universal fitment Simple installation Please Note: The ReFlex LITE does NOT have the ability to analyze and transmit ethanol content to an ECU.

Show More Show Less

Project Cars

SELECT YOUR BMW

BMW Electrical Sensors, Switches, & Relays

Sub-Categories

Select Vehicle

Purpose

Category

Brand

Price

Special Offers

Narrow Results