Find Parts That Fit Your Vehicle

BMW Performance Intake Kits

Turner Motorsport offers a variety of Performance Intake options for your BMW, including Genuine BMW, aFe Eventuri, Dinan, Gruppe M, Agency Power, and ECS Tuning.
Sort By:

Mishimoto - Corporate Logo
T#:384810
Part#: MMAIF3012P
EO#: D-759-1
In Stock at Vendor
$ 503.99 USD
Free Shipping
$ 503.99 USD
Free Shipping
Mishimoto is well-known as a producer of high-performance cooling system components. Utilizing the same quality and attention to detail, they have produced a performance air intake system for your BMW. Under load, the intake produces a louder, more aggressive tone, without affecting air/fuel ratios - it still works great with the stock tune! This intake features an enclosed airbox to scavenge cold air and protect from underhood heat, while a high-flow air filter replaces the stock paper filter element. A complete bolt-in upgrade that can be completed in an afternoon with immediate results. WARNING! Prop 65 may apply to this product. Proposition 65 (Safe Drinking Water and Toxic Enforcement Act of 1968) is a California law that applies to call companies selling products in California. Prop 65 requires any listed chemical present above very low levels that are known to cause cancer, birth defects, or other reproductive harm. For more information about California Prop 65 warning see: www.P65Warnings.ca.gov.
Show More Show Less
Mishimoto - Corporate Logo
T#:384811
Part#: MMAIF3012WBK
EO#: D-759-1
In Stock at Vendor
$ 503.99 USD
$ 503.99 USD
Mishimoto is well-known as a producer of high-performance cooling system components. Utilizing the same quality and attention to detail, they have produced a performance air intake system for your BMW. Under load, the intake produces a louder, more aggressive tone, without affecting air/fuel ratios - it still works great with the stock tune! This intake features an enclosed airbox to scavenge cold air and protect from underhood heat, while a high-flow air filter replaces the stock paper filter element. A complete bolt-in upgrade that can be completed in an afternoon with immediate results. WARNING! Prop 65 may apply to this product. Proposition 65 (Safe Drinking Water and Toxic Enforcement Act of 1968) is a California law that applies to call companies selling products in California. Prop 65 requires any listed chemical present above very low levels that are known to cause cancer, birth defects, or other reproductive harm. For more information about California Prop 65 warning see: www.P65Warnings.ca.gov.
Show More Show Less
Mishimoto - Corporate Logo
T#:5608771
Part#: MMAI-G80-21
In Stock at Vendor
$ 952.99 USD
$ 952.99 USD
The M3 has undergone significant evolution over the years, with each new iteration bringing something new to the table. From the brilliant widebody E30 of the eighties to the exotic sounding V8-powered E9X, each generation has its own identity but holds true to the goals of providing an amazing driving experience. The G8X gets one of the most potent engines produced by BMW to date, the S58B30, along with an option for AWD. Enhancing the S58 was something Mishimoto set their sights on soon after acquiring a G80 of their own, the first project being a performance air intake system. Features: Direct fit for 2021+ BMW G8X M3/M4 with 3.0L S58B30 Reduces intake restriction by up to 22.8% for more power potential Provides safe operation on a stock ECU tune Aggressive intake tone under acceleration Additional fresh air ducts draw cool air from wheel wells Amplifies turbocharger spool and bypass valve venting Rotational-molded airboxes and intake tubes provide optimal airflow, outstanding rigidity, and maximum heat-soak resistance CNC-machined aluminum connectors for maximum durability and a leak-free install Precision-engineered using the latest in 3D printing, CAD modeling, and flow bench technology CNC-Machined passenger-side turbo inlet improves flow and durability Installs in less than 1 hour with no need to remove the front bumper or undertray Airbox volume, shape, and construction material all play a part in delivering maximum airflow to your engine. Our engineering team created extremely precise rotational-molded thermoplastic airboxes that eliminate restrictions, supply maximum cool-air entry via two additional ports that open to the wheel wells, and improve engine bay aesthetics. The use of thermoplastic material ensures the air intake system will incur minimum engine bay heat soak and provides unmatched durability for years of service in the harshest environments. Our airboxes were designed using the latest in 3D printing, CAD modeling, and flow bench technology. As a result, we reduced air intake restriction by 13% on the driver-side intake tract and 22.8% on the passenger-side intake tract. For proper filtration, this kit includes dual high-flow oiled air filters which provide improved filter surface area and improved airflow over the stock panel filters. In addition to the flow benefits, our intake system provides a significant amplification of turbocharger spool and bypass valve venting. These enhanced sounds provide a new level of enjoyment, adding to the incredible driving experience you expect from a BMW M-Series. The Mishimoto 2021+ BMW G8X M3/M4 Performance Intake is a complete bolt-on kit and includes all necessary components for an easy installation. As with all Mishimoto products, this performance intake kit includes our signature Mishimoto Lifetime Warranty. Intake kit includes: (1) Driver-Side Intake Airbox Assembly (1) Driver-Side Air Filter, Oiled (1) Driver-Side Intake Tube Grommet (1) Driver-Side Intake Tube Coupler (1) Driver-Side CNC Quick-Disconnect Fitting (1) Passenger-Side Intake Airbox Assembly (1) Passenger-Side Air Filter, Oiled (1) Passenger-Side Intake Tube Grommet (1) Passenger-Side Intake Tube Coupler (1) Passenger-Side Aluminum Turbocharger Outlet (5) CNC-Machined Airbox Peg Kits (4) Stainless Steel Worm Gear Clamps Hardware Kit WARNING! Prop 65 may apply to this product. Proposition 65 (Safe Drinking Water and Toxic Enforcement Act of 1968) is a California law that applies to call companies selling products in California. Prop 65 requires any listed chemical present above very low levels that are known to cause cancer, birth defects, or other reproductive harm. For more information about California Prop 65 warning see: www.P65Warnings.ca.gov.
Show More Show Less

Mishimoto - Corporate Logo
T#:641888
Part#: MMAI-E46-01BK
In Stock at Vendor
$ 321.95 USD
$ 321.95 USD
Let your car breathe with this bolt-on intake kit - +7HP/+9WHP without a tune! The Mishimoto E46 airbox is constructed of powder-coated steel, and we line the edges with weather stripping to prevent any vibrations, damage, or hot engine air from entering the intake . The coupler is a four-ply unit designed specifically for this kit. The air filter shown above is the Mishimoto Oiled Air Filter. These filters are completely serviceable and can provide a lifetime of service if appropriately cleaned and maintained. Mishimoto also designed an internal CNC-machined connector that will allow the silicone intake hose to mate properly with their air filter. WARNING! Prop 65 may apply to this product. Proposition 65 (Safe Drinking Water and Toxic Enforcement Act of 1968) is a California law that applies to call companies selling products in California. Prop 65 requires any listed chemical present above very low levels that are known to cause cancer, birth defects, or other reproductive harm. For more information about California Prop 65 warning see: www.P65Warnings.ca.gov.
Show More Show Less

HKS - Corporate Logo
T#:587019
Part#: HKBV400001V
Ships in 9 Business Days
$ 335.00 USD
Free Shipping
$ 335.00 USD
Free Shipping

Improve the performance of your BMW's N54 3.0L engine with the HKS BOV in a striking silver finish. Blow off valves play a crucial role in turbocharger systems, and selecting the right one is essential when enhancing the performance of a turbocharged vehicle. The aftermarket HKS BOV, tailored for larger quantities of air and higher pressures, ensures optimal handling of additional airflow.

  • Enhanced Turbocharger Performance: The HKS BOV is designed to complement turbocharger systems, optimizing overall performance.
  • Increased Airflow Handling: Aftermarket blowoff valves handle larger quantities of air, accommodating the demands of performance accessories.
  • Silver Finish: The distinctive silver finish adds a touch of style to your BMW's engine bay.
  • Tailored for Higher Pressures: Specifically designed to cope with increased pressures associated with performance upgrades.

Upgrade your BMW's N54 3.0L engine with the HKS BOV in silver, ensuring a reliable and stylish addition to your turbocharger system.

Show More Show Less
Mishimoto - Corporate Logo
T#:27472222
Part#: MMAI-MIN-14WBK
Ships in 4 Business Days
$ 439.99

This product was last offered at the strikethrough price on
08-13-2026

$ 395.99 USD
Free Shipping on orders $49 and up
$ 395.99 USD
Free Shipping on orders $49 and up

Mishimoto - Corporate Logo
T#:51039974
Part#: MMB-F80-PPCSO
EO#: D-759-13
Ships in 4 Business Days
New Item
$ 2,926.00 USD
$ 2,926.00 USD
Eliminates risk of pipe-bursts by upgrading to mandrel-bent aluminum units.
Mishimoto - Corporate Logo
T#:51039961
Part#: MMB-F80-PPCAW
Ships in 4 Business Days
New Item
$ 2,926.00 USD
$ 2,926.00 USD
Reinforces the S55's cooling structure, ensuring adequate airflow and maximizing heat transfer efficiency.

Mishimoto - Corporate Logo
T#:51039973
Part#: MMB-F80-PPCMW
Ships in 4 Business Days
New Item
$ 2,926.00 USD
$ 2,926.00 USD
This Power Pack focuses on reinforcing the structural integrity of the S55’s induction system while optimizing air and fluid dynamics.

Mishimoto - Corporate Logo
T#:51039999
Part#: MMAI-G80-21H
Ships in 4 Business Days
New Item
$ 815.99 USD
$ 815.99 USD
Designed for maximum durability and ease of installation in the G8X engine bay.
Mishimoto - Corporate Logo
T#:27472223
Part#: MMAI-MIN-14WRD
Ships in 4 Business Days
$ 439.99

This product was last offered at the strikethrough price on
08-13-2026

$ 395.99 USD
Free Shipping on orders $49 and up
$ 395.99 USD
Free Shipping on orders $49 and up
Mishimoto - Corporate Logo
T#:51039977
Part#: MMB-F80-PPCYMB
EO#: D-759-13
Ships in 4 Business Days
New Item
$ 2,926.00 USD
$ 2,926.00 USD
This Power Pack is designed to strengthen the structural integrity of the S55’s induction path while maximizing airflow and fluid dynamics.


Mishimoto - Corporate Logo
T#:51039981
Part#: MMAI-G80-21CFM
EO#: D-759-13
Ships in 4 Business Days
New Item
$ 2,617.00 USD
$ 2,617.00 USD
The Mishimoto Carbon Fiber Intake is a comprehensive "bolt-on" upgrade that balances show-quality aesthetics with rugged durability.
Mishimoto - Corporate Logo
T#:51039962
Part#: MMB-F80-PPCBS
Ships in 4 Business Days
New Item
$ 2,926.00 USD
$ 2,926.00 USD
This Power Pack focuses on reinforcing the structural integrity and fluid dynamics of the S55’s induction system.
Mishimoto - Corporate Logo
T#:51039970
Part#: MMB-F80-PPCMG
Ships in 4 Business Days
New Item
$ 2,926.00 USD
$ 2,926.00 USD
This Power Pack focuses on reinforcing the structural integrity of the S55’s induction system while maximizing fluid dynamics.

Mishimoto - Corporate Logo
T#:51039969
Part#: MMB-F80-PPCLRG
Ships in 4 Business Days
New Item
$ 2,926.00 USD
$ 2,926.00 USD
This Power Pack focuses on reinforcing the structural integrity of the S55’s induction system while optimizing fluid dynamics.

Mishimoto - Corporate Logo
T#:27472226
Part#: MMAI-MIN-14P
Back Ordered
$ 384.99 USD
$ 384.99 USD