BMW Intake Manifold Components (DISA, Vacuum, CCV, Etc)

Intake Manifold Upgrade Kit

10X Entries Into Our F80 M3 Sweepstakes

T#:15710827

Part#: 11617559523-KT

In Stock

Sale - Save 25% $ 902.99

This product was last offered at the strikethrough price on
05-03-2026

$ 677.38 USD

Add to Wish List

Qty

Sale - Save 25%

$ 902.99

This product was last offered at the strikethrough price on
05-03-2026

$ 677.38 USD

Add to Wish List

The E90 330i had the highest horsepower out of the N52-powered vehicles. The reason for this was while the 128i, 325i, 328i, 525i, and 528i received a single-stage manifold, the 330i was gifted a 3-stage manifold. A 3-stage manifold consisted of 2 DISA valves that would divert air to the cylinders that needed it. With more air going to the appropriate cylinders and fuel adjustments by the ECU, this valve system helps extract the most power from the N52. Luckily this amazing manifold bolts on to any version of the N52 and, after a flash of the ECU, can give you up to 42hp! *Flash Software not currently available from ECS Tuning* Kit includes: 330i intake manifold Both DISA valves Gaskets Mounting hardware Crankcase vent hose

Show More Show Less

Crankcase Vent Valve - E36, E39, Z3

10X Entries Into Our F80 M3 Sweepstakes

T#:14288

Part#: TMS14288

In Stock

Sale - Save 26% $ 51.99

This product was last offered at the strikethrough price on
05-03-2026

$ 38.23 USD

Add to Wish List

Qty

Sale - Save 26%

$ 51.99

This product was last offered at the strikethrough price on
05-03-2026

$ 38.23 USD

Add to Wish List

The crankcase vent valve (CVV) holds and releases oil vapors that build up in the engine. It's the same type of system previously known as a PCV valve and the same deficiencies exist. Over time, the CVV will become saturated and clogged with oil. When this happens, the oil-rich vapors from the engine will back up into the intake tract and eventually into the combustion chamber. The oil added to the gasoline/air mix will cause misfires, carbon deposits, rough running, and blue smoke out the tailpipe. Replacing the CVV every 70,000 miles will ensure the correct and clean ventilation of oil vapor.

Replacement of the CVV can be done without removing the intake manifold. But replacing it during an M50 Manifold upgrade is the perfect time.

Included:
11151703484 - crankcase vent valve
13411733217 - sealing grommet

This item fits the following BMWs:
1996-1999 E36 BMW 323is 323ic 328i 328is 328ic M3
1997-1998 E39 BMW 528i
1997-1998 Z3 BMW Z3 2.8
1998-2000 Z3 BMW Z3 M Roadster M Coupe

Show More Show Less

Crank Case Vent Hose Kit - S63 4.4L Engine

10X Entries Into Our F80 M3 Sweepstakes

T#:23913949

Part#: CRNKVENTKITKT

In Stock

$ 224.99 USD

Add to Wish List

Qty

$ 224.99 USD

Add to Wish List

Elevate your S63 4.4L engine's capabilities with our meticulously designed Crank Case Vent Hose Kit. Crafted from premium-grade materials, this kit ensures superior ventilation, mitigating pressure accumulation within the engine, thereby enhancing its overall performance.

Engineered to precise specifications, our kit seamlessly replaces the OEM vent hoses, guaranteeing a perfect fit. By reducing stress on the engine, it prolongs its lifespan and maintains peak functionality. Rely on this kit to provide unparalleled performance and unwavering reliability for your S63 4.4L engine.

Show More Show Less

Air Adjustment Unit/DISA Valve Kit

10X Entries Into Our F80 M3 Sweepstakes

T#:15710824

Part#: 11617544805-KT

In Stock

Sale - Save 25% $ 155.99

This product was last offered at the strikethrough price on
05-03-2026

$ 116.87 USD

Add to Wish List

Qty

Sale - Save 25%

$ 155.99

This product was last offered at the strikethrough price on
05-03-2026

$ 116.87 USD

Add to Wish List

A bad DISA valve can cause a variety of issues, from a loud racket in the engine bay, hesitation at low rpm and a rough idle with lean codes. If the valve is making a loud noise, we recommend replacing it as soon as possible. It is possible for the pin holding the flap to be sucked into the motor causing serious damage. Very easy to replace, just need to undo the 4 bolts holding it to the intake manifold. Includes new mounting hardware

Show More Show Less

Intake Manifold Gasket Front And Rear

10X Entries Into Our F80 M3 Sweepstakes

T#:56254755

Part#: 11611736656/7KT2

Ships in 1-2 days

$ 1,023.99 USD

Add to Wish List

Qty

$ 1,023.99 USD

Add to Wish List

Engineered for enthusiasts who demand zero compromises on the street or the track, this kit brings together the critical intake manifold profile seals required to restore a tight air seal. Built from oil and heat resistant elastomers, these gaskets ensure exact intake runner sealing

Show More Show Less

EVO1 Performance Intake Manifold W/ Integrated Intercooler - BMW Gen1...

Pre-order now - Available late-April / early-May!

T#:14982194

Part#: 200001204

In Stock

$ 2,690.00 USD

Add to Wish List

Qty

$ 2,690.00 USD

Add to Wish List

The 3.0 Liter B58 turbo engine of the specified BMW models is equipped with an indirect charge-air cooling circuit. So the cooling of the charged air is realized by a water-cooled intercooler, which is integrated directly into the intake manifold. The WAGNERTUNING intake manifold with integrated intercooler has got a new performance core which was specially developed for the high requirements and individual mounting position of the B58.1 engine and offers 128% more external core volume compared to the original intercooler. The calculated ratio between the inner and outer cooling surface generates a maximum heat transfer and at the same time the best possible internal airflow. With the help of CFD simulations, the CNC-milled end tanks were designed for optimal airflow conditions. The result is an excellent cooling property with minimal back pressure. That`s why this kit is also perfect for racing use. An optimal cooling effect of the charged air with a significant increase in performance! All WAGNERTUNING radiators are equipped with a heat-conductive anti-corrosion coating to ensure a lasting cooling effect. The plug & play installation of the system is simple and easy to perform (an installation instruction is included as well). Advantages of this product: significantly better cooling performance (up to 20°C cooler IAT) maximum mechanical discharge of the turbocharger (35% less back pressure) more power and torque for your engine 100% pressure resistance 100% Plug and Play (no modifications) preprocessed port fuel injection (Fuel Rail not included) three 1/8 NPT ports for measuring additional parameters six preprocessed NOS or WMI ports (Nozzles not included) this intake manifold is suitable for all performance levels up to 4 years warranty important information for oil service: the oil filter still can be replaced without removing the intake manifold again!

Show More Show Less

Wagner B58 Fuel Rail Kit With Lines

T#:35761660

Part#: 001002433.KKIT.B

Ships in 1 Business Day

$ 360.00 USD

Add to Wish List

Qty

$ 360.00 USD

Add to Wish List

Air Adjustment Unit/DISA Valve Kit

10X Entries Into Our F80 M3 Sweepstakes

T#:15677538

Part#: 11617533344-KT

In Stock

Sale - Save 25% $ 162.99

This product was last offered at the strikethrough price on
05-03-2026

$ 122.12 USD

Add to Wish List

Qty

Sale - Save 25%

$ 162.99

This product was last offered at the strikethrough price on
05-03-2026

$ 122.12 USD

Add to Wish List

A bad DISA valve can cause a variety of issues, from a loud racket in the engine bay, hesitation at low rpm and a rough idle with lean codes. If the valve is making a loud noise, we recommend replacing it as soon as possible. It is possible for the pin holding the flap to be sucked into the motor causing serious damage. Very easy to replace, just need to undo the 4 bolts holding it to the intake manifold. Includes new mounting hardware

Show More Show Less

Intake Manifold With Integrated Intercooler

T#:57507414

Part#: 200001187

Ships in 1 Business Day

$ 2,900.00 USD

Add to Wish List

Qty

$ 2,900.00 USD

Add to Wish List

Engineered for track enthusiasts and performance drivers pushing the limits of the S58 platform, Wagner Tuning delivers the ultimate cooling upgrade.

Intake Manifold With Integrated Intercooler For BMW M3 G80 Limousine ...

T#:35121145

Part#: 2000001187

Ships in 1 Business Day

$ 3,990.00 USD

Add to Wish List

Qty

$ 3,990.00 USD

Add to Wish List

Wagner Tuning - Intake Manifold With Integrated Intercooler For BMW M3 G80 Limousine (Competition) delivers a high-performance solution tailored to enhance engine efficiency and cooling in BMW’s renowned M3 G80 Competition model. This intake manifold with an integrated intercooler by Wagner Tuning is designed to optimize airflow, reduce intake temperatures, and increase power output, giving drivers an impressive boost in horsepower and torque. Ideal for enthusiasts who demand peak performance, it provides significant advantages in both power and reliability, making it a top choice at Turner Motorsport.

Key Benefits: - Improved Engine Efficiency: Optimizes airflow and cooling to sustain higher performance levels in demanding conditions - Increased Power Output: Boosts horsepower and torque by reducing intake temperatures, enabling more efficient combustion - High-Quality Construction: Built from durable materials for longevity and reliability under high temperatures and pressures - Easy Installation: Direct-fit design ensures a straightforward installation, suitable for both professional and DIY setups - With this Wagner Tuning intake manifold and integrated intercooler, BMW G80, G82, G87, F97, and F98 drivers can achieve powerful, consistent performance gains, perfect for both road and track use.

Show More Show Less

Disa Valve Kit - with hardware

10X Entries Into Our F80 M3 Sweepstakes

T#:15710808

Part#: 11617579114-KT

Ships in 1-2 days

Sale - Save 1% $ 605.99

This product was last offered at the strikethrough price on
05-03-2026

$ 597.50 USD

Add to Wish List

Qty

Sale - Save 1%

$ 605.99

This product was last offered at the strikethrough price on
05-03-2026

$ 597.50 USD

Add to Wish List

Air adjustment unit controls the path of the air in the intake manifold, allowing either a shorter or longer runner length. A common source of trouble causing low RPM sluggishness and accompanied by a clicking sound from the engine bay.

Show More Show Less

Idle Control Valve Kit

10X Entries Into Our F80 M3 Sweepstakes

T#:15744026

Part#: 11611437453-KT

In Stock

$ 173.13 USD

Add to Wish List

Qty

$ 173.13 USD

Add to Wish List

Located in the intake system, this part is a common source of idle issues. This kit includes a new mount and idle control valve grommet

Idle Control Valve Kit - E6X M5 M6 S85 5.0L

10X Entries Into Our F80 M3 Sweepstakes

T#:24145975

Part#: S85IDLVLVKT

Ships on Apr 2, 2027

$ 2,361.99

This product was last offered at the strikethrough price on
09-21-2026

$ 2,169.99 USD

Add to Wish List

Qty

$ 2,169.99 USD

Add to Wish List

Idle control valves are a common problem for the E60 M5 and E63/64 M6. This kit was built to correct several engine performance issues caused by a failed idle controller, including: stalling, rough or low idle, no idle compensation for accessory loads, and a possible check engine light or failed emissions test.

Show More Show Less

Project Cars

SELECT YOUR BMW

BMW Intake Manifold Components (DISA, Vacuum, CCV, Etc)

Sub-Categories

Intake Manifold Upgrade Kit

Crankcase Vent Valve - E36, E39, Z3

Crank Case Vent Hose Kit - S63 4.4L Engine

Air Adjustment Unit/DISA Valve Kit

Intake Manifold Gasket Front And Rear

EVO1 Performance Intake Manifold W/ Integrated Intercooler - BMW Gen1...

Wagner B58 Fuel Rail Kit With Lines

Air Adjustment Unit/DISA Valve Kit

Intake Manifold With Integrated Intercooler

Intake Manifold With Integrated Intercooler For BMW M3 G80 Limousine ...

Disa Valve Kit - with hardware

Idle Control Valve Kit

Idle Control Valve Kit - E6X M5 M6 S85 5.0L

Select Vehicle

Purpose

Category

Brand

Price

Special Offers

Shipping

Narrow Results