BMW Performance Flash Software, 2005+ Models

BM3 Wireless OBDII WiFi ENET CANBUS Flash Adapter - BMW F & G Cha...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:33746523

Part#: OBD2FA

Ships in 5 Business Days

$ 99.00 USD

Add to Wish List

Qty

$ 99.00 USD

Add to Wish List

Introducing the latest and greatest Wireless connection method for your BMW F and G series vehicles and the 2020+ Toyota Supra, the all-new bootmod3 Wireless Adapter.

bootmod3 WiFi adapter is fully designed in-house by our engineers, built with the highest quality parts and a modern chipset. It achieves perfect reliability and is the quickest adapter currently offered on the market.

Features:

Fastest flash times over ENET and CANBUS
Reliable and consistent connectivity
Ability to configure your own WiFi password.
- Most if not all other WiFi OBD adapters leave open WiFi access to your OBD port which is a security issue for your vehicle. With bootmod3 you can set/change to your own custom WiFi password securing access.
Wireless ENET support for BMW F and G series vehicles and 2020+ Toyota Supra
Wireless CANBUS Support
- Unlike generic WiFi adapters, our adapter allows full flashing of transmission on GEN2 BMW and 2020+ Toyota Supra removing the need for additional WiFi adapters or DCAN cables
NO ALARMS if left plugged in (BMW G series vehicles and Toyota Supra)
- Enters ultra-low power mode if left plugged in consuming just ~20mA
OTA updates through the new bootmod3 app
Firmware fully extensible for additional flash and diagnostic protocols for future connectivity support
Manual Toggle switch to fully power down the adapter
Small form factor, considerably smaller than generic WiFi ENET adapters
No VIN locking, can be used on multiple vehicles

Vehicles Supported:

All BMW F and G series vehicles
2014+ Mini
2020+ Toyota Supra (A90 A91)

Supported 3rd Party Applications:

OEM factory diagnostics such as ISTA and ESYS
XHP App
Bimmercode App
Bimmerlink App
ProTool App
...and other apps requiring ENET and UDS to CANBUS support

When connected on iOS, copy your WiFi settings from Automatic to Manual and leave the Router field empty. This leaves your Mobile data connection active while connected with the vehicle.

Some items used and/or installed by PRO TUNING FREAKS may void portions of your vehicle’s factory warranty. Some items may not be legal for “on highway use”. PRO TUNING FREAKS makes no guarantees to the legality of any parts used for “on highway vehicles” and accepts no responsibility for compliance with the vehicle’s factory warranty.

Show More Show Less

Motiv ReFlex+ for BMW

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:17970629

Part#: RFXF02UI6

In Stock

$ 859.00 USD

Add to Wish List

Qty

$ 859.00 USD

Add to Wish List

The MOTIV ReFlex+ is an Advanced I/O Integration module allowing a level of precise control of auxiliary components. In addition, the ReFlex can incorporate external data into the factory DME/ECU in parallel through optional CANbus integration. Utilizing the CANbus option, multiple digital and analog signals can be used by the DME/ECU for safety, data logging, or adaptive tuning features. It is unique in its ability to function as a separate standalone, as well as a parallel module in conjunction with the DME/ECU. The ReFlex provides the most accurate and precise supplementary sequential fuel injection with the ability to control other advanced features all in one place. It brings a new level of control, function, and versatility to tuning any modern-day vehicle. Preset crank and cam trigger for most modern-day BMW engines, as well as fully configurable triggers to be synched on any vehicle application. Configurable to operate on 4, 5, 6, and 8-cylinder engines. 3 Point MAP sensor calibration table makes it configurable for almost any MAP or TMAP sensor. Sequential Port Injection with the ability to sense individual injector failures on 4 to 8-cylinder engines. Built-in Ethanol Content Analyzer. The Re|Flex firmware and XDFs include ethanol compensation tables to scale properly for varying ethanol % based on real-time input from the sensor. 2x Additional Outputs. These outputs have 12x12 resolution tables for control in TunerPro R/T. These can be configured to run as on/off, digital, frequency (25hz), or PID. Boost Control WGDC Methanol Solenoid Control PWM (for use with valves such as the Aquamist FAV and the ProMeth Pulse Valve) Nitrous Solenoid Control PWM Auxiliary fuel pump relay trigger 2x Inputs Ethanol Content Sensor Fuel Pressure Sensor (0-10bar) Oil Pressure (0-10bar) Coolant Pressure (0-10bar) EGBP/EMAP (0-10bar) CANbus (not required) enabled communication for the transmission and receiving of digital signals for fully DME/ECU integrated control of external modifications. The CANbus communications also allow for data and errors to be transmitted to and from the vehicle's engine control computer in order to add safeguards and implement engine trips and fail safes. Logging via OBDII is still fully functional and is not affected at all by the communication with the Re|Flex. Some of the developments underway include: Error reporting to and from factory ECU for unparalleled safety Output WGDC by converting an EWG signal to a more conventional DC output for controlling standard 3port and 4port boost solenoids for use with external WG’s The ability to datalog non-factory parameters such as ethanol content, additional pressure sensor, PI IDC, and more! These features make the Re|Flex the most powerful and safest supplementary and auxiliary controller on the market. However, this is only the beginning. As flash platforms find the need for more accessories to control, the Re|Flex was designed to be updated easily by the end user in order to add functionality as it is developed.

Show More Show Less

BMW B46 B48 B58 Motiv ReFlex 0-10 Bar Pressure Sensor

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:28537533

Part#: 101-0216

In Stock

$ 105.00 USD

Add to Wish List

Qty

$ 105.00 USD

Add to Wish List

BMW B46 B48 B58 Motiv ReFlex 0-10 Bar Pressure Sensor is designed for accurate measurement of fluid and air pressure in high-performance applications. Ideal for monitoring a variety of pressures including fuel, boost, coolant, and oil, this sensor provides crucial data for optimizing vehicle performance.

Featuring a 2-Pin DTM connector, this sensor offers a direct plug-and-play connection to the ReFlex+ harness, ensuring a seamless integration with flash platforms via CANbus. Each ReFlex+ unit can support up to two of these sensors, allowing for comprehensive monitoring.

Versatile Measurement: Capable of measuring fuel pressure, boost, coolant, oil, and other fluids.
Easy Integration: 2-Pin DTM connector provides a direct plug-and-play connection.
Comprehensive Monitoring: Supports integration of up to two sensors per ReFlex+ unit.
High-Performance Design: Designed to handle high pressures and deliver accurate readings.

For optimal installation, consider using the 3/8 Female to 3/8 Male SAE Quick Disconnect Adapter with a 1/8" NPT port on an ethanol sensor or the 5/16 Female to 5/16 Male SAE Quick Disconnect Adapter with a 1/8" NPT port on a factory fuel line. Please note that the ethanol sensor is not included.

Show More Show Less

F/G Chassis Kies WiFi ENET Adapter

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:4319895

Part#: KIES07-WIFI-AD

In Stock

$ 99.99 USD

Add to Wish List

Qty

$ 99.99 USD

Add to Wish List

A Wireless ENET Adapter tool, powered directly by your OBD!

ReFlex+ Plug-N-Play Harness Kit - Tensility Motorsport

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:29201085

Part#: 200.1058

Ships in 5 Business Days

$ 794.00 USD

Add to Wish List

Qty

$ 794.00 USD

Add to Wish List

Tensility Motorsports has developed a plug and play kit for the ReFlex+ that was engineered to meet our high quality standards. TMS has been approved by MOTIV to manufacturer harnesses and they will not void your warranty on MOTIV ReFlex+ products.Â With attention to detail in the selection of wiring, production standards, and quality assurance, TMS plug and play harnesses ensure a consistent and reliable installation for a hassle-free experience. Each harness kit includes all the necessary components to install and run a ReFlex+ Advanced I/O Controller on the vehicle it was designed for. The harness is divided into a few separate pieces for ease of installation and a very clean finished look. Main Harness: This section of the TMS harness kit includes plug and play connections to the vehicles Cam, Crank, and TMAP sensors, 6 injector runs for port injection, the ethanol content sensor connector, and DTM connections for all of the auxiliary inputs and outputs. CAN+ Power Splitter: A clean over-molded compact harness that provides a plug and play connection to your vehicles Body Domain Controller. This section is where the kit will get power, ground, and connect to the CANbus network. Auxiliary Cable Pack: Four additional cables are included to simplify future expansions such as additional sensors, methanol, NOS, fuel pump relays, etc. These 8 ft. cables plug directly into the unused ReFlex+ harness auxiliary ports Aux Out 1/2/3 and Aux In 4 (PSI).

Show More Show Less

Motiv ReFlex+ Control Unit

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:29101684

Part#: 900.1001

Ships in 1 Business Day

$ 729.00 USD

Add to Wish List

Qty

$ 729.00 USD

Add to Wish List

The motive ReFlex+ Control Unit is an advanced I/O integration module that allows precise control of aftermarket components and sends data to the factory DME (ECU) via CANbus communication, expanding performance tuning capabilities. This control unit allows for precise control of fuel pumps, methanol injection kits, nitrous kits, boost controllers, relay triggers, port injection systems, flex fuel systems, and more. Supporting sequential port injection for up to eight injectors and real-time monitoring of injectors, this unit is a great choice for precise control of fuel delivery to your engine.

Show More Show Less

Shark Injector Performance Software - Z4 M54 3.0L

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:387575

Part#: N745Z430

Ships on Aug 11, 2026

Sale - Save 10% $ 349.00

This product was last offered at the strikethrough price on
05-03-2026

$ 314.10 USD

Add to Wish List

Qty

Sale - Save 10%

$ 349.00

This product was last offered at the strikethrough price on
05-03-2026

$ 314.10 USD

Add to Wish List

Revitalize your BMW's performance effortlessly with the Shark Injector, the easiest solution to add power and torque. Dyno-tuned by BMW legend Jim Conforti, this software optimizes high-octane (91+) pump gas, enhancing mid-range torque and high-RPM horsepower. The rev limit is raised, and fuel and spark maps are fine-tuned for improved performance without compromising driveability. A true plug-and-play solution, each unit is shipped with detailed instructions, ensuring a swift installation in just an hour.

Dyno-tuned by BMW legend Jim Conforti for optimal performance
Designed for high-octane (91+) pump gas
Boosts mid-range torque and high-RPM horsepower
Fine-tuned fuel and spark maps for enhanced power
Maintains driveability and improves responsiveness
Easy plug-and-play installation with detailed instructions
Rev limit raised to 7,000 RPM for an exhilarating driving experience
Compatible with NORTH AMERICAN SPEC BMWs
+4 HP at 6,100 RPM, +7 torque @ 3,400 RPM

Unleash the full potential of your BMW's M54 engine with the Shark Injector, designed for a superior driving experience.

Show More Show Less

Turner Motorsport

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:359552

Part#: 179-710

In Stock

Sale - Save 20% $ 249.00

This product was last offered at the strikethrough price on
05-03-2026

$ 199.20 USD

Add to Wish List

Qty

Sale - Save 20%

$ 249.00

This product was last offered at the strikethrough price on
05-03-2026

$ 199.20 USD

Add to Wish List

If you're looking for the easiest way to add power and torque to your BMW, a Turner Performance Chip is answer to your prayers. Dyno-tuned by BMW tuning legend Jim Conforti, these chips are designed to make the most of high-octane (91+) pump gas and boost mid-range torque and high-RPM horsepower. To make the most of these improvements, fuel and spark maps are fine-tuned to make your BMW perform better than it did when it left the factory. There is no downside to installing a Turner Performance Chip - each chip is designed to safely improve performance, while maintaining driveability and improving responsiveness. All chips are shipped with detailed instructions and are typically installed in an hour by an enthusiast with hand tools. Turner Motorsport and Jim Conforti have over 20 years of experience with making your BMW come alive with software tuning. Unlike eBay chips, Turner Performance Chips use extensively tested, carefully designed fuel & spark maps designed to get the most performance out of your BMW without risking engine damage or reducing driveability. Since 1995, Jim Conforti has been using his expertise to fine tune the BMW driving experience by finding more power and torque and improving throttle response. With over 10,000 units sold, it's no surprise that Jim Conforti is widely regarded as the leader in BMW chip tuning. Don't be fooled by imitators - your BMW deserves the best. BMW's legendary M30 "big six" is certainly no slouch when it comes to mid-range torque, but it's somewhat lacking in high-end power in stock form. The Turner Conforti Performance Chip picks up where the factory left off, improving weak points in the engine's power curve while playing to its strengths. This chip produces awesome peak horsepower gains, with a healthy gain in mid-range torque that will wake up your BMW while preserving its character. Horsepower Gain: +43 @ 6,250 RPM Torque Gain: +21 @ 2,000 RPM Installation instructions included. Turner is so confident you will be delighted by your new no-downside power, torque, and overall performance, that they offer a 30 day money back guarantee on this product, serviced by ECS Tuning.

Show More Show Less

Turner Conforti Performance Chip

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:386655

Part#: 4131-0001

In Stock

Sale - Save 20% $ 299.00

This product was last offered at the strikethrough price on
05-03-2026

$ 239.20 USD

Add to Wish List

Qty

Sale - Save 20%

$ 299.00

This product was last offered at the strikethrough price on
05-03-2026

$ 239.20 USD

Add to Wish List

If you're looking for the easiest way to add power and torque to your BMW, a Turner Performance Chip is answer to your prayers. Dyno-tuned by BMW tuning legend Jim Conforti, these chips are designed to make the most of high-octane (91+) pump gas and boost mid-range torque and high-RPM horsepower. To make the most of these improvements, the rev limit is raised, and fuel and spark maps are fine-tuned to make your BMW perform better than it did when it left the factory. There is no downside to installing a Turner Performance Chip - each chip is designed to safely improve performance, while maintaining driveability and improving responsiveness. All chips are shipped with detailed instructions and are typically installed in an hour by an enthusiast with hand tools. Turner Motorsport and Jim Conforti have over 20 years of experience with making your BMW come alive with software tuning. Unlike eBay chips, Turner Performance Chips use extensively tested, carefully designed fuel & spark maps designed to get the most performance out of your BMW without risking engine damage or reducing driveability. Since 1995, Jim Conforti has been using his expertise to fine tune the BMW driving experience by finding more power and torque and improving throttle response. With over 10,000 units sold, it's no surprise that Jim Conforti is widely regarded as the leader in BMW chip tuning. Don't be fooled by imitators - your BMW deserves the best. BMW's M50 engine has a bulletproof reputation for reliability, and it's well known that it's capable of producing much more power than it had when it left the factory. Jim Conforti has tuned this Turner Conforti Performance Chip to play to the M50's strengths without sacrificing reliability, adding more high-RPM horsepower and mid-range torque. You will also enjoy improved throttle response and smoother running, making this a total performance upgrade for your BMW. BMW's M50 engine has a bulletproof reputation for reliability, and it's well known that it's capable of producing much more power than it had when it left the factory. Jim Conforti has tuned this Turner Conforti Performance Chip to play to the M50's strengths without sacrificing reliability, adding more high-RPM horsepower and mid-range torque. You will also enjoy improved throttle response and smoother running, making this a total performance upgrade for your BMW. Horsepower Gain: +22 @ 6,000 RPM Torque Gain: +20 @ 4,000 RPM New Rev Limit: 7,000 RPM Note: Tuning for popular aftermarket upgrades such as a lightened flywheel, intake, and exhaust are available. Please contact your sales rep for details. Installation instructions included. Turner is so confident you will be delighted by your new no-downside power, torque, and overall performance, that they offer a 30 day money back guarantee on this product, serviced by ECS Tuning.

Show More Show Less

E34 525i/E36 325i -12/94 Turner Conforti Performance Chip for Sport E...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:386644

Part#: 4130-0004

In Stock

Sale - Save 20% $ 299.00

This product was last offered at the strikethrough price on
05-03-2026

$ 239.20 USD

Add to Wish List

Qty

Sale - Save 20%

$ 299.00

This product was last offered at the strikethrough price on
05-03-2026

$ 239.20 USD

Add to Wish List

If you're looking for the easiest way to add power and torque to your BMW, a Turner Performance Chip is answer to your prayers. Dyno-tuned by BMW tuning legend Jim Conforti, these chips are designed to make the most of high-octane (91+) pump gas and boost mid-range torque and high-RPM horsepower. To make the most of these improvements, the rev limit is raised, and fuel and spark maps are fine-tuned to make your BMW perform better than it did when it left the factory. There is no downside to installing a Turner Performance Chip - each chip is designed to safely improve performance, while maintaining driveability and improving responsiveness. All chips are shipped with detailed instructions and are typically installed in an hour by an enthusiast with hand tools. Turner Motorsport and Jim Conforti have over 20 years of experience with making your BMW come alive with software tuning. Unlike eBay chips, Turner Performance Chips use extensively tested, carefully designed fuel & spark maps designed to get the most performance out of your BMW without risking engine damage or reducing driveability. Since 1995, Jim Conforti has been using his expertise to fine tune the BMW driving experience by finding more power and torque and improving throttle response. With over 10,000 units sold, it's no surprise that Jim Conforti is widely regarded as the leader in BMW chip tuning. Don't be fooled by imitators - your BMW deserves the best. BMW's M50 engine has a bulletproof reputation for reliability, and it's well known that it's capable of producing much more power than it had when it left the factory. Jim Conforti has tuned this Turner Conforti Performance Chip to play to the M50's strengths without sacrificing reliability, adding more high-RPM horsepower and mid-range torque. You will also enjoy improved throttle response and smoother running, making this a total performance upgrade for your BMW. Horsepower Gain: +20 @ 6,000 RPM Torque Gain: +13 @ 4,500 RPM New Rev Limit: 7,000 RPM Installation instructions included. Turner is so confident you will be delighted by your new no-downside power, torque, and overall performance, that they offer a 30 day money back guarantee on this product, serviced by ECS Tuning.

Show More Show Less

Turner Conforti Performance Chip

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:386695

Part#: 4131-3008

In Stock

Sale - Save 20% $ 299.00

This product was last offered at the strikethrough price on
05-03-2026

$ 239.20 USD

Add to Wish List

Qty

Sale - Save 20%

$ 299.00

This product was last offered at the strikethrough price on
05-03-2026

$ 239.20 USD

Add to Wish List

If you're looking for the easiest way to add power and torque to your BMW, a Turner Performance Chip is answer to your prayers. Dyno-tuned by BMW tuning legend Jim Conforti, these chips are designed to make the most of high-octane (91+) pump gas and boost mid-range torque and high-RPM horsepower. To make the most of these improvements, the rev limit is raised, and fuel and spark maps are fine-tuned to make your BMW perform better than it did when it left the factory. There is no downside to installing a Turner Performance Chip - each chip is designed to safely improve performance, while maintaining driveability and improving responsiveness. All chips are shipped with detailed instructions and are typically installed in an hour by an enthusiast with hand tools. Turner Motorsport and Jim Conforti have over 20 years of experience with making your BMW come alive with software tuning. Unlike eBay chips, Turner Performance Chips use extensively tested, carefully designed fuel & spark maps designed to get the most performance out of your BMW without risking engine damage or reducing driveability. Since 1995, Jim Conforti has been using his expertise to fine tune the BMW driving experience by finding more power and torque and improving throttle response. With over 10,000 units sold, it's no surprise that Jim Conforti is widely regarded as the leader in BMW chip tuning. Don't be fooled by imitators - your BMW deserves the best. The E36 M3 is an amazing machine that combines raw, razor's edge performance with luxury and comfort in one amazing package. For years, the US-market E36 M3 has been maligned by many for being down on power compared to its European counterpart. This Turner Conforti Performance Chip produces impressive gains in both horsepower and torque in useful parts of the powerband, where you need it most. Horsepower Gain: +19 @ 5,000 RPM Torque Gain: +16 @ 3,500 RPM New Rev Limit: 7,000 RPM Note: Tuning for popular aftermarket upgrades such as a lightened flywheel, intake, and exhaust are available. Please contact your sales rep for details. Installation instructions included. Turner is so confident you will be delighted by your new no-downside power, torque, and overall performance, that they offer a 30 day money back guarantee on this product, serviced by ECS Tuning.

Show More Show Less

E34 540i AT -12/94 Turner Conforti Performance Chip

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:386623

Part#: 4040-4010

In Stock

Sale - Save 20% $ 249.99

This product was last offered at the strikethrough price on
05-03-2026

$ 199.96 USD

Add to Wish List

Qty

Sale - Save 20%

$ 249.99

This product was last offered at the strikethrough price on
05-03-2026

$ 199.96 USD

Add to Wish List

If you're looking for the easiest way to add power and torque to your BMW, a Turner Performance Chip is answer to your prayers. Dyno-tuned by BMW tuning legend Jim Conforti, these chips are designed to make the most of high-octane (91+) pump gas and boost mid-range torque and high-RPM horsepower. To make the most of these improvements, fuel and spark maps are fine-tuned to make your BMW perform better than it did when it left the factory. There is no downside to installing a Turner Performance Chip - each chip is designed to safely improve performance, while maintaining driveability and improving responsiveness. All chips are shipped with detailed instructions and are typically installed in an hour by an enthusiast with hand tools. Turner Motorsport and Jim Conforti have over 20 years of experience with making your BMW come alive with software tuning. Unlike eBay chips, Turner Performance Chips use extensively tested, carefully designed fuel & spark maps designed to get the most performance out of your BMW without risking engine damage or reducing driveability. Since 1995, Jim Conforti has been using his expertise to fine tune the BMW driving experience by finding more power and torque and improving throttle response. With over 10,000 units sold, it's no surprise that Jim Conforti is widely regarded as the leader in BMW chip tuning. Don't be fooled by imitators - your BMW deserves the best. BMW's all-aluminum M60 was a triumph of engineering when it was released. Lightweight, with a small footprint and packed with cutting-edge technology, the M60 V8 was impressive then and it's still impressive now. Jim Conforti has carefully tuned the Turner Conforti Performance Chip to safely give your M60-powered BMW more high-RPM horsepower and more mid-range torque where you need it most. Horsepower Gain: +19 @ 6,000 RPM Torque Gain: +33 @ 3,000 RPM Installation instructions included. Turner is so confident you will be delighted by your new no-downside power, torque, and overall performance, that they offer a 30 day money back guarantee on this product, serviced by ECS Tuning.

Show More Show Less

Weistec BMW N52 3.0L W.1 ECU Tune

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:22789640

Part#: 05-452-00219-8KT

Ships in 6 Business Days

$ 999.00 USD

Add to Wish List

Qty

$ 999.00 USD

Add to Wish List

Increase of +10 Horsepower, and +15 Torque, Eliminate top speed limiter, Increased throttle response. W.1 Tunes are designed for completely stock vehicles with no other modifications!

Dinan Performance Engine Software - 00-03 BMW M5

Call In Or Chat For Best Price! affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:32218230

Part#: D900-50M-KIT

Ships in 9 Business Days

$ 285.99 USD

Add to Wish List

Qty

$ 285.99 USD

Add to Wish List

Dinan Engine Software enhances your M5 by safely raising the rev limit by 270 RPM, providing a wider power band and increased road speed in each gear. Additionally, it removes the top speed governor, allowing the car to reach its full potential. Features: - Increased Power: Maximum gains of +5 HP at 6500 RPM and +5 lb-ft of torque at 4500 RPM - 50-State Emissions Legal: CARB EO # D-176-26 - 270 RPM Rev Limit Increase - Improved Throttle Response - Removal of Top Speed Governor - Smooth and Predictable Power Delivery - Includes Programming Cables and Software License for a Single VIN

Show More Show Less

Motiv ReFlex+

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:29101668

Part#: 910.1001

Ships in 5 Business Days

$ 849.00 USD

Add to Wish List

Qty

$ 849.00 USD

Add to Wish List

The MOTIV ReFlex+ is an Advanced I/O Integration module allowing a level of precise control of auxiliary components. In addition, the ReFlex can incorporate external data into the factory DME/ECU in parallel through optional CANbus integration. Utilizing the CANbus option, multiple digital and analog signals can be used by the DME/ECU for safety, data logging, or adaptive tuning features. It is unique in its ability to function as a separate standalone, as well as a parallel module in conjunction with the DME/ECU. The ReFlex provides the most accurate and precise supplementary sequential fuel injection with the ability to control other advanced features all in one place. It brings a new level of control, function, and versatility to tuning any modern-day vehicle. Preset crank and cam trigger for most modern-day BMW engines, as well as fully configurable triggers to be synched on any vehicle application. Configurable to operate on 4, 5, 6, and 8-cylinder engines. 3 Point MAP sensor calibration table makes it configurable for almost any MAP or TMAP sensor. Sequential Port Injection with the ability to sense individual injector failures on 4 to 8-cylinder engines. Built-in Ethanol Content Analyzer. The Re|Flex firmware and XDFs include ethanol compensation tables to scale properly for varying ethanol % based on real-time input from the sensor. 2x Additional Outputs. These outputs have 12x12 resolution tables for control in TunerPro R/T. These can be configured to run as on/off, digital, frequency (25hz), or PID. Boost Control WGDC Methanol Solenoid Control PWM (for use with valves such as the Aquamist FAV and the ProMeth Pulse Valve) Nitrous Solenoid Control PWM Auxiliary fuel pump relay trigger 2x Inputs Ethanol Content Sensor Fuel Pressure Sensor (0-10bar) Oil Pressure (0-10bar) Coolant Pressure (0-10bar) EGBP/EMAP (0-10bar) CANbus (not required) enabled communication for the transmission and receiving of digital signals for fully DME/ECU integrated control of external modifications. The CANbus communications also allow for data and errors to be transmitted to and from the vehicle's engine control computer in order to add safeguards and implement engine trips and fail safes. Logging via OBDII is still fully functional and is not affected at all by the communication with the Re|Flex. Some of the developments underway include: Error reporting to and from factory ECU for unparalleled safety Output WGDC by converting an EWG signal to a more conventional DC output for controlling standard 3port and 4port boost solenoids for use with external WG’s The ability to datalog non-factory parameters such as ethanol content, additional pressure sensor, PI IDC, and more! These features make the Re|Flex the most powerful and safest supplementary and auxiliary controller on the market. However, this is only the beginning. As flash platforms find the need for more accessories to control, the Re|Flex was designed to be updated easily by the end user in order to add functionality as it is developed.

Show More Show Less

Dinan - Dinantronics X Tuning Module - N63TU

Call In Or Chat For Best Price! affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:9093987

Part#: D440-0139

Ships in 6 Business Days

11% off MSRP $ 749.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 665.99 USD

Add to Wish List

Qty

11% off MSRP

$ 749.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 665.99 USD

Add to Wish List

The DINANTRONICS X is Bluetooth smart and offers convenient access to the adjustment of power levels directly from the palm of your hand. A further advancement beyond its entry level little brother, the DINANTRONICS SPORT, X connects to additional inputs and/or has a more refined tuning strategy that yields more power as a result. For those that do not wish to (or can't) alter their stock ECU with a more robust engine flash the DINANTRONICS X is a perfect alternative to satiate the craving for "more". Whichever level of engine tuning is ultimately chosen you can be sure to be pleased by the result. The Dinan Difference is possible by employing a full staff of talented engineers that are well rounded in many facets of automotive engineering and backed by a wealth of hands-on knowledge. Features: More Power: Max gains of up to +39 HP and +41 lb-ft TRQ (Crank); +35 HP and +37 lb-ft TRQ (Wheel). Bluetooth smart (Android and iOS Compatible). App download / pairing process detailed within the installation instructions 7 power levels and a bypass setting to choose from. Smooth and predictable power delivery. On board diagnostics and factory safeguards maintained. Unaffected by dealer factory updates. Plug and play installation. 14 day satisfaction guarantee. 1 year limited warranty.

Show More Show Less

RaceChip XLR5 - BMW & MINI Cooper

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:38688929

Part#: 999982BMW

Special Order: No Guaranteed ETA

$ 259.00 USD

Add to Wish List

Qty

$ 259.00 USD

Add to Wish List

With the RaceChip XLR5, you can easily tune your car's throttle response via app to your taste – from a comfortable sedan to a racy sports car. That makes it the perfect add-on to our chip tuning boxes.

Show More Show Less

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:22822574

Part#: 05-585-00225-2KT

In Stock at Vendor

$ 1,299.00 USD

Add to Wish List

Qty

$ 1,299.00 USD

Add to Wish List

Increase of +40 Horsepower, and +16 Torque, Eliminate top speed limiter, Increased throttle response. W.1 Tunes are designed for completely stock vehicles with no other modifications!

ReFlex+ Plug-N-Play Harness Kit - Visconti Tuning

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:29201087

Part#: 200.1103

Ships in 5 Business Days

$ 795.00

This product was last offered at the strikethrough price on
01-05-2026

$ 615.00 USD

Add to Wish List

Qty

$ 615.00 USD

Add to Wish List

Visconti Tuning teamed up with MOTIV as the first company to bring a plug-and-play harness to the community. After years of success and some of the fastest Supras and BMWs in the world using the harness, Visconti Tuning has improved upon an already fantastic offering.

Show More Show Less

Weistec BMW N63 W.1 ECU Tune

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:22690736

Part#: 05-463-00097-4KT

Ships in 6 Business Days

$ 1,599.00 USD

Add to Wish List

Qty

$ 1,599.00 USD

Add to Wish List

Increase of +120 Horsepower, and +130 Torque! Eliminate top speed limiter, Increased throttle response. W.1 Tunes are designed for completely stock vehicles with no other modifications!

Weistec BMW M5 F90 S63TU W.2 ECU Tune

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:22690725

Part#: 05-563-00146-0KT

Ships in 6 Business Days

$ 2,799.00 USD

Add to Wish List

Qty

$ 2,799.00 USD

Add to Wish List

Increase of +125 Horsepower, and +142 Torque! Eliminate top speed limiter, Increased throttle response. W.2 Tunes are designed for vehicles with performance exhausts & high-flow air filters!

DINANTRONICS X - 2020-2023 BMW M235I/X2 M35I

Call In Or Chat For Best Price! affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:13793007

Part#: D440-0157

Ships in 9 Business Days

11% off MSRP $ 749.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 665.99 USD

Add to Wish List

Qty

11% off MSRP

$ 749.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 665.99 USD

Add to Wish List

The newest installment of Dinan's tuning modules is the DINANTRONICS X. This Bluetooth-capable module can show gains of +22hp and +32lb-ft trq reliably through the 7 power levels to choose from. This new level is delivered smoothly and predictably and is ready for plug-and-play installation!

Show More Show Less

Dinan - Dinantronics X Tuning Module - N63TU

Call In Or Chat For Best Price! affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:9093979

Part#: D440-0125

Ships in 5 Business Days

11% off MSRP $ 749.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 665.99 USD

Add to Wish List

Qty

11% off MSRP

$ 749.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 665.99 USD

Add to Wish List

The DINANTRONICS X is Bluetooth smart and offers convenient access to the adjustment of power levels directly from the palm of your hand. A further advancement beyond its entry level little brother, the DINANTRONICS SPORT, X connects to additional inputs and/or has a more refined tuning strategy that yields more power as a result. For those that do not wish to (or can't) alter their stock ECU with a more robust engine flash the DINANTRONICS X is a perfect alternative to satiate the craving for "more". Whichever level of engine tuning is ultimately chosen you can be sure to be pleased by the result. The Dinan Difference is possible by employing a full staff of talented engineers that are well rounded in many facets of automotive engineering and backed by a wealth of hands-on knowledge. Features: More Power: Max gains of up to +39 HP and +41 lb-ft TRQ (Crank); +35 HP and +37 lb-ft TRQ (Wheel). Bluetooth smart (Android and iOS Compatible). App download / pairing process detailed within the installation instructions 7 power levels and a bypass setting to choose from. Smooth and predictable power delivery. On board diagnostics and factory safeguards maintained. Unaffected by dealer factory updates. Plug and play installation. 14 day satisfaction guarantee. 1 year limited warranty.

Show More Show Less

Weistec BMW S85 W.2 ECU Tune

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:22822575

Part#: 05-585-00226-3KT

In Stock at Vendor

$ 1,399.00 USD

Add to Wish List

Qty

$ 1,399.00 USD

Add to Wish List

Increase of +50 Horsepower, and +26 Torque! Eliminate top speed limiter, Increased throttle response. W.2 Tunes are designed for vehicles with performance high-flow exhausts!

Weistec BMW E90 M3 W.2 ECU Tune

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:22822560

Part#: 05-565-00218-2KT

In Stock at Vendor

$ 1,399.00 USD

Add to Wish List

Qty

$ 1,399.00 USD

Add to Wish List

Increase of +40 Horsepower, and +45 Torque! Eliminate top speed limiter, Increased throttle response. W.2 Tunes are designed for vehicles with performance high-flow exhausts!

Weistec BMW M5 F90 S63TU W.1 ECU Tune

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:22690724

Part#: 05-563-00145-9KT

Ships in 6 Business Days

$ 2,599.00 USD

Add to Wish List

Qty

$ 2,599.00 USD

Add to Wish List

Increase of +105 Horsepower, and +122 Torque! Eliminate top speed limiter, Increased throttle response. W.1 Tunes are designed for completely stock vehicles with no other modifications!

Weistec BMW E90 M3 W.1 ECU Tune

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:22822559

Part#: 05-565-00217-1KT

In Stock at Vendor

$ 1,299.00 USD

Add to Wish List

Qty

$ 1,299.00 USD

Add to Wish List

Increase of +25 Horsepower, and +25 Torque, Eliminate top speed limiter, Increased throttle response. W.1 Tunes are designed for completely stock vehicles with no other modifications!

DINANTRONICS X - 2019-2020 BMW M4CS

Call In Or Chat For Best Price! affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:14188794

Part#: D440-0150

Ships on Jun 29, 2026

$ 665.99 USD

Add to Wish List

Qty

$ 665.99 USD

Add to Wish List

The DINANTRONICS X is the newest installment of the highly successful Dinan foray into inline tuning modules. Like its predecessors, it is a highly engineered piece of computer hardware and software that enhances engine performance to levels the stock programming is not allowed to venture. It does this without affecting long-term reliability or the functionality of onboard diagnostic systems when run under recommended operating variables. Unlike its predecessor, however, the DINANTRONICS X is Bluetooth smart and offers convenient access to the adjustment of power levels directly from the palm of your hand. A further advancement beyond its entry-level little brother, the DINANTRONICS SPORT, X connects to additional inputs and has a more refined tuning strategy that yields more power as a result. For those that do not wish to (or can't) alter their stock ECU with a more robust engine flash the DINANTRONICS X is a perfect alternative to satiate the craving for "more". Whichever level of engine tuning is ultimately chosen you can be sure to be pleased by the result. The Dinan Difference is possible by employing a full staff of talented engineers that are well-rounded in many facets of automotive engineering and backed by a wealth of hands-on knowledge. Stemming from diverse backgrounds not only on racing teams but on standard factory production line vehicles, we have seen it all. Manipulating these signals/maps with an adept hand, all the while keeping an engine running at its best and with the most reliable power, is what Dinan is all about. Features: More Power: Max gains of up to +98 HP and +103 lb-ft TRQ (Crank); +86 HP and +94 lb-ft TRQ (Wheel). Bluetooth smart (Android and iOS Compatible). App download/pairing process is detailed within the installation instructions located under the Tech Resources dropdown below. 7 power levels and a bypass setting to choose from. Smooth and predictable power delivery. Onboard diagnostics and factory safeguards maintained. Unaffected by dealer factory updates. Plug and play installation. 14-day satisfaction guarantee. 1-year limited warranty.

Show More Show Less

Project Cars

SELECT YOUR BMW

BMW Performance Flash Software, 2005+ Models

Select Vehicle

Category

Brand

Price

Special Offers

Shipping

Purpose

Narrow Results