Air Intake Filters

Our Performance CSL Air Filters start with a multi-layer oiled cotton construction that contains millions of smaller fibers to provide superior filtration and performance over the OEM filter. Precisely manufactured for a secure fitment to ensure all the air entering your motor is properly filtered. With the CSL E46 only being offered in Europe, the OEM air filters are produced in much lower quantities making them harder to obtain and drive up the price. Turners solution is a price effective solution that offers premium filtration with increased flow, extended service interval and lifespan.

Having a clean air filter ensures your engine is running at its best efficiency! Proper air flow will help your engine breathe, get the best fuel economy and allow full power throughout the power band. Get the most out of your CSL intake with a new Oiled High Flow Air Filter. These filters can be cleaned, oiled and reused for an extended service life.

Oiled versus Dry Filters:

Although both options will keep the air to your engine clean and improve airflow, there are a few differences to consider when choosing the best filter for you. Oiled filters allow better airflow than dry filters, however they require more maintenance. Oiled filters will likely get dirty faster, needing to be cleaned more regularly. When cleaning an oiled filter, it is necessary to oil them with filter oil afterwards.
Dry filters offer slightly lower airflow but are easier to maintain while still out performing the OE paper filter. Dry filters can be washed with warm soapy water. There is no oiling necessary afterwards.
Both dry and oiled filters flow better than stock and can be reused.
Product Features:

Direct Replacement for OEM filter
Increased air flow
Lower cost
Serviceable
Readily available
How to service an oiled air filter:

Take out your High Flow Filter
Gently tap your air filter on a smooth surface
Wash with warm soapy water a a soft bristled brush
Rinse with low pressure water
Let the filter air dry
Apply new filter oil
Ready to reinstall for a fresh drive!

Our Performance CSL Air Filters start with a multi-layer synthetic dry cotton construction that contains millions of smaller fibers to provide superior filtration and performance over the OEM filter. Precisely manufactured for a secure fitment to ensure all the air entering your motor is properly filtered. With the CSL E46 only being offered in Europe, the OEM air filters are produced in much lower quantities making them harder to obtain and drive up the price. Turners solution is a price effective solution that offers premium filtration with increased flow, extended service interval and lifespan.

Having a clean air filter ensures your engine is running at its best efficiency! Proper air flow will help your engine breathe, get the best fuel economy and allow full power throughout the power band. Get the most out of your CSL intake with a new Synthetic High Flow Air Filter. These filters can be cleaned and reused for an extended service life.

Oiled versus Dry Filters:

Although both options will keep the air to your engine clean and improve airflow, there are a few differences to consider when choosing the best filter for you. Oiled filters allow better airflow than dry filters, however they require more maintenance. Oiled filters will likely get dirty faster, needing to be cleaned more regularly. When cleaning an oiled filter, it is necessary to oil them with filter oil afterwards.
Dry filters offer slightly lower airflow but are easier to maintain while still out performing the OE paper filter. Dry filters can be washed with warm soapy water. There is no oiling necessary afterwards.
Both dry and oiled filters flow better than stock and can be reused.
Product Features:

Direct Replacement for OEM filter
Increased air flow
Lower cost
Serviceable
Readily available
How to service an oiled air filter:

Take out your High Flow Filter
Gently tap your air filter on a smooth surface
Wash with warm soapy water a a soft bristled brush
Rinse with low pressure water
Let the filter air dry
Ready to reinstall for a fresh drive!

An easy way to improve the performance of your N54 powered BMW is by removing the stock air box and swapping in this Dual Cone Intake "DCI" from Burger Motorsports. Featuring two S&B inverted cone filters with adapter couplers and new hardware, these easily install into the stock box location, allowing for greatly improved intake air flow. This is great for both stock and modified vehicles, as this allows for greater air flow at all RPMs and removes the air restriction that would normally rob your engine of power.

In addition to increased power, these filters give your engine a more aggressive appearance and sound that any automotive enthusiast will appreciate.

MADE IN THE USA

**CARB Approved Under Executive Order (EO) No. D-744-2 for all 2007-2012 BMW models equipped with the N54 3.0L twin-turbocharged 6-cylinder engine.**

This is a replacement filter for the popular 3.5" Burger Motorsports Performance Intakes. It comes pre-oiled with blue filter oil and a new clamp.

Includes:

Reusable BMS 3.5" inverted cone performance air filter (1123) Metal clamp

ALTA Performance Open Cell Foam Filter

Improve your BMW's performance with the ALTA Performance Open Cell foam filter, designed to enhance horsepower, filtration efficiency, and ease of installation. This direct replacement filter is compatible with all ALTA Cold Air Intake Systems and universal applications requiring a 2.75" mouth filter.

Benefits:

• Increases horsepower
• Improves filtration efficiency
• Simple and easy to install
• Compatible with ALTA Cold Air Intake Systems and universal applications

An easy way to improve the performance of your N54 powered BMW is by removing the stock air box and swapping in this Dual Cone Intake "DCI" from Burger Motorsports. Featuring two S&B inverted cone filters with adapter couplers and new hardware, these easily install into the stock box location, allowing for greatly improved intake air flow. This is great for both stock and modified vehicles, as this allows for greater air flow at all RPMs and removes the air restriction that would normally rob your engine of power.

In addition to increased power, these filters give your engine a more aggressive appearance and sound that any automotive enthusiast will appreciate.

MADE IN THE USA

**CARB Approved Under Executive Order (EO) No. D-744-2 for all 2007-2012 BMW models equipped with the N54 3.0L twin-turbocharged 6-cylinder engine.**

MINI R55 to R61 Foam Filter Panel features high-flowing, super-cleaning foam media that enhances air intake efficiency while maintaining excellent dirt-holding capacity. This advanced design allows for a thinner filter with double the volume compared to the OEM intake box, promoting superior airflow and performance.

The MINI R55 to R61 Foam Filter Panel offers several key benefits:

• Enhanced Airflow: The foam media enables more air to be drawn across the entire filter, improving overall engine performance.
• Increased Volume: Provides up to twice the volume of the OEM intake box, allowing the intake system to breathe more freely.
• Consistent Performance: Unlike OEM and K&N filters, which can lose horsepower as they clog, the foam media continues to flow effectively even when full of dirt.
• Improved Horsepower: Maintains maximum horsepower between filter cleanings, ensuring sustained engine performance.