BMW Engine Parts

E82 135i N54, E9X 335 N54, E60 535 Vargas Upgraded PCV Valve ...

T#:389684

Part#: VTT-N54-PCV

In Stock

$ 68.99 USD

Add to Wish List

Qty

$ 68.99 USD

Add to Wish List

The crankcase oil vent system on the N52/N54 is one of its weakest and cheaply designed systems. We see crankcase vent issues on even stock engines but with more boost the problems are exponential. This Vargas upgraded PCV valve, and an oil catch can, are what the N54 engine needs and may alleviate most of your oil and boost leak issues. The PCV valve is supposed to let oil either return to the oil pan or pass through the intake manifold and get burned up in the combustion chamber. However, BMW used a weak plastic vent valve that doesn't seal well when under boost. Instead of closing and venting the oil out of the intake, it's forced through this valve and into the intake and coating your valves with oil residue and carbon. Most boost equals more oil forcing its way by. This upgraded N54 PCV valve uses higher grade materials, including aluminum, to provide a better seal and prevent oil from entering the intake. It's an easy install and a must-have item when considering any turbo work.

Show More Show Less

VTT N54 Billet Vacuum (Boost Control) Tank Kit - Anodized Blue - BMW ...

T#:7530040

Part#: VACUUMCANBLUE

In Stock

$ 199.99 USD

Add to Wish List

Qty

$ 199.99 USD

Add to Wish List

VTT is proud to offer their billet replacement for the factory plastic vacuum tanks that store vacuum from the pump and use it to regulate boost via the solenoids. The stock plastic can and small plastic nipples on the stock cans have a tendency to crank over time, and if they leak you will get low boost, or no boost, and poor performance. These cans do away with the weak plastic cans while adding some pop, and color to your engine bay. These vacuum cans retain ALL of the factory provisions including mounting points but come with 90-degree fittings for easier routing of the lines VTT's cans are made of 6061-T6 aluminum, and anodized in 4 colors for beauty, and long life. They also knurl the cans for a very distinct look in the engine bay! VTT also designed these cans to complement their N54 Billet lineup – N5X Billet Oil caps, N5XBillet Oil filter housing caps, Billet coolant cap, Billet valve cover, billet oil cooler block off plate, and Billet Power Steering cap, and so on. All will have matching color These cans are offered in 4 colors – Red, Black, Blue, and Clear anodize The kit will include: 2 – Vacuum canisters (color of choice) 4 – billet 90-degree barbed fittings Requires the additional use of aftermarket vacuum line - Vacuum line not included. Replaces Genuine BMW Vacuum Canisters # 11652247620

Show More Show Less

VTT Billet Power Steering Pulley - N54

T#:7292042

Part#: VTT-N54-PSN54

Ships in 2 Business Days

Starting at $ 56.99 USD

Add to Wish List

Starting at $ 56.99 USD

Add to Wish List

Vargas has introduced their new Billet Power Steering pulleys for the N54 engine! A well-known issue with the N54 with Hydraulic power steering is the plastic pulley either hitting the subframe, or breaking on its own. This can result in the belt to be ejected from the pulley, and leave you stranded with no serpentine belt. This also increases the chance of sucking the belt into the engine through the front seal. Put an end to the dreaded plastic PS pulley issues with the VTT 100% Billet Aluminum PS pulley. These are constructed from 6061-T6 aluminum and anodize in one of 4 colors (Black, Red, Blue, and Clear) for a great look, and long-lasting finish. These weigh 11oz, very close to the weight of a stock pulley, and are lighter than the cast aluminum versions on the market.

Show More Show Less

VTT Ignition Coil Conversion Kit - S55/N55 To B58 - Multiple Color Op...

T#:22196341

Part#: VTTS55CLCNV

In Stock

Starting at $ 335.99 USD

Add to Wish List

Starting at $ 335.99 USD

Add to Wish List

VTT is proud to offer its very own Game Changer S55/N55 to B58 Coil conversion kit for the BMW S55/N55 platforms. The 55 series of engines has notoriously had ignition problems with the factory coils, while aftermarket upgrades do exist, they can be bulky. The solution is the BMW B58 ignition coils which are extremely robust and can support well over 1000WHP with no issues. This means a plug-and-play affordable solution that fits like stock, and looks AMAZING doing so! We designed our own 6061-T6 Billet bracket in a plethora of colors including matching shades for every S55/N55 Valve Cover. This means you can mix and match the color of the bracket with coil color, with VC color to truly tailor your engine bay to look exactly how you want it to! The kit comes with the following: 3 – Billet Aluminum Coil Brackets in the color of choice 6 – Plug and play VTT wiring harnesses 6 – Custom VTT stalks to convert the B58 coils to the S55/N55 head (We ensure proper spring length inside the boot for optimal spring-to-plug contact) *NOTE: Flash setting changes may be required when installing the conversion kit to ensure the proper function of the B58 coils with S55/N55 DME. This can be found in almost all flashing software settings such as MHD, Bm3, etc.* **NOTE: THESE BRACKETS FIT STOCK S55 VC, VTT S55 BILLET VC, and MOST N55 made after 2011. If you have an older N55 made before 01/2011. These may not fit. Purchase carefully as items that have been installed or attempted to cannot be returned.**

Show More Show Less

Cometic MLS Head Gasket - 85mm Bore - .140in - M50B25/M52B28 ...

T#:26738398

Part#: C4328-140

In Stock at Vendor

$ 277.99 USD

Add to Wish List

Qty

$ 277.99 USD

Add to Wish List

Multi-Layer Steel gaskets are comprised of multiple embossed layers of both proprietary high-temperature coated and uncoated stainless steel, requiring less clamp load, creating less bore distortion, and conforms load distribution across the sealing area. The embossed outer layers of our head gaskets meet the demands of a variety of harsh sealing environments, load conditions, and surface finishes. The MLS Gasket (Multi-Layer Steel) features an active combustion seal on multiple layers. The stainless steel outer layers utilize FKM (Viton®) rubber coating, a high-temperature and chemical-resistant polymer. A topcoat of PTFE aids in resistance to fret and increased cold sealing.

Show More Show Less

Cometic MLS Head Gasket - 87mm Bore - .080in - BMW S50B30US/S52B32 ...

T#:26738395

Part#: C4329-080

In Stock at Vendor

$ 262.99 USD

Add to Wish List

Qty

$ 262.99 USD

Add to Wish List

Multi-Layer Steel gaskets are comprised of multiple embossed layers of both proprietary high-temperature coated and uncoated stainless steel, requiring less clamp load, creating less bore distortion, and conforms load distribution across the sealing area. The embossed outer layers of our head gaskets meet the demands of a variety of harsh sealing environments, load conditions, and surface finishes. The MLS Gasket (Multi-Layer Steel) features an active combustion seal on multiple layers. The stainless steel outer layers utilize FKM (Viton®) rubber coating, a high-temperature and chemical-resistant polymer. A topcoat of PTFE aids in resistance to fret and increased cold sealing.

Show More Show Less

Genuine BMW Oil Drain Plug with Sealing Washer - N62 N63 4.4L 4.8L ...

T#:402828

Part#: 07119905428KT

In Stock

$ 21.99 USD

Add to Wish List

Qty

$ 21.99 USD

Add to Wish List

This genuine BMW replacement oil drain plug with washer is perfect to replace your old beat up or stripped oil plug for easy removal and oil changes.

Genuine BMW Screw Plug
This item fits the following BMW Chassis:
E70 X5M,E71 X6M,E53 48IS,E38,E39,E53 X5 X5,E63,E65,E70 X5,E71 X6,F01,F02,F06,F10,F12,F13,F15,F16

Show More Show Less

S55B30T0 85mm Bore .044in MLX Head Gasket

T#:22064604

Part#: C14133-044

In Stock at Vendor

$ 194.99 USD

Add to Wish List

Qty

$ 194.99 USD

Add to Wish List

Cometic is the industry standard when upgrading the head gasket on your high performance BMW. These MLS (Metal Layered Steel) head gaskets are many enthusiasts’ choice when adding more boost or simply bulletproofing your current setup! Designed for high-performance applications, Cometic Head Gaskets are sure to stand up to the task!

Show More Show Less

Vargas Billet B58 Vacuum/Boost Adapter - B58 3.0L

T#:638811

Part#: VTT-B58-VACCUM

Ships in 10 Business Days

Starting at $ 52.99 USD

Add to Wish List

Starting at $ 52.99 USD

Add to Wish List

Vargas Turbo has released their very own BMW B58 vacuum/boost adapter. These go inline with the intake manifold fitting and provide a full boost/vacuum signal from the manifold. This fitting adds two 1/8" NPT bungs to accept any fitting that has 1/8" NPT threads. You can choose three configuration options: Fitting by itself Fitting with one 1/4" barb and one plug Fitting with two 1/4" barbs Once installed it tucks perfectly under your engine cover. These are perfect for running your PI switch off manifold pressure, which is much more accurate than the charge pipe, and they are also great for BOVs running the proper size line without having to drill a hole in your manifold. These do space out any sensors etc giving inaccurate readings like some of the other brands do.

Show More Show Less

Cometic Head Gasket - BMW S65B40 - 0.040" Thick

T#:19428661

Part#: C5112-040

Back Ordered

$ 144.99 USD

Add to Wish List

Qty

$ 144.99 USD

Add to Wish List

Multi-Layer Steel gaskets are comprised of multiple embossed layers of both proprietary high-temperature coated and uncoated stainless steel, requiring less clamp load, creating less bore distortion, and conforms load distribution across the sealing area. The embossed outer layers of our head gaskets meet the demands of a variety of harsh sealing environments, load conditions, and surface finishes. The MLS Gasket (Multi-Layer Steel) features an active combustion seal on multiple layers. The stainless steel outer layers utilize FKM (Viton®) rubber coating, a high-temperature and chemical-resistant polymer. A topcoat of PTFE aids in resistance to fret and increased cold sealing.

Show More Show Less

Cometic Gasket For N54

T#:26071905

Part#: H4293SP1052S

Back Ordered

$ 253.99 USD

Add to Wish List

Qty

$ 253.99 USD

Add to Wish List

Upgrade your BMW 135i, 335i, X6, or Z4 with the Cometic 85.5mm Bore .052in MLX Head Gasket.

This high-quality gasket ensures a reliable seal for your engine's cylinder head, preventing leaks and maintaining optimal compression. Crafted with precision and durability in mind, it offers superior performance and longevity, making it an ideal choice for BMW enthusiasts seeking reliable engine components.

Provides a reliable seal for the cylinder head
Prevents leaks and maintains optimal compression
Crafted with precision for superior performance
Durable construction ensures longevity
Compatible with BMW 135i, 335i, X6, and Z4 models

Show More Show Less

Cometic Head Gasket - S58 0.055" Thick

T#:26038595

Part#: COM-C15696-055

Ships in 4 Business Days

$ 229.99 USD

Add to Wish List

Qty

$ 229.99 USD

Add to Wish List

Cometic is the industry standard when upgrading the head gasket on your high performance BMW. These MLS (Metal Layered Steel) head gaskets are many enthusiasts’ choice when adding more boost or simply bulletproofing your current setup! Designed for high-performance applications, Cometic Head Gaskets are sure to stand up to the task!

Show More Show Less

VTT B58 GC-MID 2-Port Turbocharger Upgrade W/ 4" Connector & Install ...

T#:9416039

Part#: B58GCMID2-4-INS

Ships on Aug 28, 2026

$ 2,640.99 USD

Add to Wish List

Qty

$ 2,640.99 USD

Add to Wish List

Ready to take your B58 to the next level? Don’t want to deal with core charges, long lead times, or restrictive factory housings? Look no further! VTT has you covered with our 100% new casting B58 “GC” “GC-MID” and “GC+” turbocharger upgrade. VTT starts by keeping the great design elements of the factory B58 turbo and removing the not-so-great ones such as the small factory inlet area, bearing housing oil structure, thrust bearing, and anything else that could be improved upon. With the basics covered, VTT stepped it up a level adding in proprietary VTT changes and finished off by having all these parts cast to OE quality. What this means for you is serious B58 power made easy; GC’s are a drop-in B58 turbocharger upgrade that supports over 600WHP while maintaining factory spool and all factory connections including oil, water, downpipe, and charge pipe. NOTE: A tune is highly recommended to get the best performance out of this upgrade. Key Design Elements: All new castings with factory restrictions removed. No oversized wheels stuffed into factory housings here! GC is cold side and bearing housing only, GC+ is a complete unit Full 3' turbocharger inlet size with an included 3-4' silicone inlet elbow that removes ALL factory inlet restrictions 9 blade Mar-M 246 turbine wheel with the latest aero technology for increased flow while maximizing spool 9 blade “point-milled” compressor wheels with the latest aero technology to maximize flow while virtually eliminating surge Direct connection to ALL factory lines including oil, water, downpipe, and factory charge pipe Redesigned, and improved internal components including bearing housing oiling, and an upgraded thrust bearing NO CORE CHARGES. The new unit is sold to you outright. Keep your old unit in case you ever want to go back to stock. Or sell it to recoup your investment -it’s up to you! No long lead times; once fully released production units will be on the shelf for same to next day shipping (please inquire about stock levels when ordering) Full 12-month unlimited mileage/No Hassle Warranty. If you have an issue we will replace the unit no questions asked Turbocharger Purchase includes: 1 – VTT B58 “GC” turbocharger 1 – VTT B58 “GC” 3'-4' Silicone inlet elbow with adapters for factory connections 1 – 3' hose clamp for silicone inlet elbow 1 – 4' connector for inlet elbow for use with different intakes (if you are not sure you need this, order it just in case) 1 – Turbo Installation Kit from VTT

Show More Show Less

N20 Stage 1 Turbocharger upgrade - New

T#:28770031

Part#: VTT-N20-STG1-NEW

Ships on Aug 28, 2026

$ 1,519.99 USD

Add to Wish List

Qty

$ 1,519.99 USD

Add to Wish List

WHP Level supported (with proper fuel, upgrades, and tuning) Stock – 350WHP Our VTT N20 Stage 1 upgrade consists of a brand new N20 turbo, custom cast and manufactured for VTT, this is coupled with a VTT custom reverse billet 9-blade compressor wheel, and a brand new 9-blade high-flowing turbine wheel. Turbo upgrade is a complete bolt-on with no changes to water or oil lines and is undetectable by the dealership. Replace that old worn out N20 turbocharger with the latest and greatest technology from Vargas Turbo Technologies!

Show More Show Less

Performance Cylinder Head Gasket - 0.044 Inch

T#:25971916

Part#: C4617-044

In Stock at Vendor

$ 93.99 USD

Add to Wish List

Qty

$ 93.99 USD

Add to Wish List

Cometic MLS Head Gasket - 85mm Bore - .098in - M50B25/M52B28 ...

T#:26738399

Part#: C4328-098

In Stock at Vendor

$ 262.99 USD

Add to Wish List

Qty

$ 262.99 USD

Add to Wish List

Multi-Layer Steel gaskets are comprised of multiple embossed layers of both proprietary high-temperature coated and uncoated stainless steel, requiring less clamp load, creating less bore distortion, and conforms load distribution across the sealing area. The embossed outer layers of our head gaskets meet the demands of a variety of harsh sealing environments, load conditions, and surface finishes. The MLS Gasket (Multi-Layer Steel) features an active combustion seal on multiple layers. The stainless steel outer layers utilize FKM (Viton®) rubber coating, a high-temperature and chemical-resistant polymer. A topcoat of PTFE aids in resistance to fret and increased cold sealing.

Show More Show Less

BMW M50 M52 Head Gasket - .080

T#:26505005

Part#: C4328-080

In Stock at Vendor

$ 262.99 USD

Add to Wish List

Qty

$ 262.99 USD

Add to Wish List

BMW M50 M52 Head Gasket - .080 is designed to provide superior sealing performance for BMW engines. This high-quality MLS (Multi-Layer Steel) gasket from Cometic features three layers of stainless steel, ensuring exceptional strength and durability. Each outer layer is embossed and coated with Viton, a fluoroelastomer rubber-based material known for its resilience in harsh conditions. The Viton coating offers heat resistance up to 250°C (482°F), making it ideal for high-performance applications.

Superior Strength: Three layers of stainless steel provide robust sealing and durability.
Enhanced Heat Resistance: Viton coating withstands temperatures up to 250°C (482°F), ensuring reliable performance under extreme conditions.
Excellent Corrosion Resistance: Designed to resist corrosion and ensure long-term reliability.
Optimized Sealing: Embossed and coated layers effectively seal various surface textures and handle fluctuating loads.

The BMW M50 M52 Head Gasket - .080 from Turner Motorsport is engineered to meet the demands of high-performance BMW engines, offering enhanced reliability and durability.

Show More Show Less

N55 Cometic Head Gasket - 0.052"

T#:31522946

Part#: C15476-052

Back Ordered

$ 194.99 USD

Add to Wish List

Qty

$ 194.99 USD

Add to Wish List

Cometic is the industry standard when upgrading the head gasket on your high performance BMW. These MLS (Metal Layered Steel) head gaskets are many enthusiasts’ choice when adding more boost or simply bulletproofing your current setup! Designed for high-performance applications, Cometic Head Gaskets are sure to stand up to the task!

Show More Show Less

N55 Cometic Head Gasket - 0.044"

T#:31522944

Part#: C15476-044

Back Ordered

$ 194.99

This product was last offered at the strikethrough price on
06-15-2026

$ 177.99 USD

Limited Qty Sale

Add to Wish List

Qty

$ 194.99

This product was last offered at the strikethrough price on
06-15-2026

$ 177.99 USD

Limited Qty Sale

Add to Wish List

Performance Cylinder Head Gasket - 0.040 Inch

T#:31622532

Part#: C4308-040

In Stock at Vendor

$ 96.99 USD

Add to Wish List

Qty

$ 96.99 USD

Add to Wish List

PFS Port Injection Kit - B58

Aftermarket charge pipe required

T#:5663657

Part#: PFS-B58-PI

Ships in 10 Business Days

Starting at $ 733.99 USD

Add to Wish List

Starting at $ 733.99 USD

Add to Wish List

The kit includes all the parts needed for installation and has a choice of 550CC, or 900CC US-made DW injectors (larger available by request), and a Motiv Reflex Controller

VTT B58 Gen 1 Billet Aluminum Valve Cover - Silver, Black, Red, Or Bl...

T#:3658005

Part#: B58BLTVLVCVR

Ships in 10 Business Days

Starting at $ 1,763.99 USD

Add to Wish List

Starting at $ 1,763.99 USD

Add to Wish List

Introducing Vargas Turbo's B58 Gen 1 Billet Valve cover. VTT created these for the B58 owner who wants to add a great look to their engine bay while also getting rid of the stock plastic valve cover which has problematic PCV systems and can crack with higher mileage. Vargas Turbo Technologies recommends running it with their B58 engine catch can kit (See listing options). VTT offers a number of breather choices for extra crankcase venting including our billet oil cap breather, as well as their one-way Stainless breathers.

Show More Show Less

Cometic Multi-layer Steel Head Gasket Set

T#:24079611

Part#: COM-HG-S65-93030

Ships in 4 Business Days

$ 379.99 USD

Add to Wish List

Qty

$ 379.99 USD

Add to Wish List

93mm - 0.030"

Vargas N54 To B58 Coil Conversion Kit

T#:7292057

Part#: VTT-N54-B58-CNV

Ships in 10 Business Days

Sale - Save 5% $ 677.99

This product was last offered at the strikethrough price on
05-03-2026

Starting at $ 641.87 USD

Add to Wish List

Sale - Save 5%

$ 677.99

This product was last offered at the strikethrough price on
05-03-2026

Starting at $ 641.87 USD

Add to Wish List

VTT is proud to offer its very own N54 to B58 Coil conversion kit for the N54 platform. While factory coil upgrades such as S55, and our own N54 coil upgrades do provide more spark, the BMW B58 ignition coils are extremely robust and can support well over 1000whp with no issues. This means a plug, and play affordable solution that fits like stock, and looks AMAZING doing so! Vargas's 6061-T6 Billet bracket comes in a variety of colors including matching shades for every N54 Valve Cover we offer (even the cast wrinkle). This means you can mix and match the color of the bracket with coil color, with VC color to truly tailor your engine bay to look exactly how you want it to! The kit comes with the following: 1 – Billet Aluminum Coil Bracket in the color of choice or Genuine Carbon Fiber 6 – Plug and play VTT wiring harnesses 6 – Custom VTT stalks to convert the B58 coils to the N54 head (We ensure proper spring length inside the boot for optimal spring to plug contact) 6 – Coils in the color of choice (optional) **Note: This only fits the stock N54 Valve covers or Vargas Billet and Cast Valve Covers.

Show More Show Less

Cometic Gasket

T#:17140158

Part#: C14010-067

In Stock at Vendor

$ 241.99 USD

Add to Wish List

Qty

$ 241.99 USD

Add to Wish List

Cometic BMW M50B25 / M52B28 85mm Bore .067in MLX Head Gasket

Cometic MLX Head Gasket - 85mm Bore - .044in - N54B30

T#:26738401

Part#: C15257-044

Back Ordered

$ 194.99 USD

Add to Wish List

Qty

$ 194.99 USD

Add to Wish List

Multi-Layer Steel gaskets are comprised of multiple embossed layers of both proprietary high-temperature coated and uncoated stainless steel, requiring less clamp load, creating less bore distortion, and conforms load distribution across the sealing area. The embossed outer layers of our head gaskets meet the demands of a variety of harsh sealing environments, load conditions, and surface finishes. The MLS Gasket (Multi-Layer Steel) features an active combustion seal on multiple layers. The stainless steel outer layers utilize FKM (Viton®) rubber coating, a high-temperature and chemical-resistant polymer. A topcoat of PTFE aids in resistance to fret and increased cold sealing. Cometic's MLX Gasket (Multi-Layer-Xtreme) features an extra 'stopper' fold-over layer providing a torque limiting surface that prevents yielding of the combustion seal. Proprietary high-temperature coatings along with embossments provide a micro seal for fluids against the head and block surface.

Show More Show Less

N55 Cometic Head Gasket - 0.060"

T#:31522947

Part#: C15476-060

Back Ordered

$ 194.99 USD

Add to Wish List

Qty

$ 194.99 USD

Add to Wish List

Cometic is the industry standard when upgrading the head gasket on your high performance BMW. These MLS (Metal Layered Steel) head gaskets are many enthusiasts’ choice when adding more boost or simply bulletproofing your current setup! Designed for high-performance applications, Cometic Head Gaskets are sure to stand up to the task!

Show More Show Less

Performance Cylinder Head Gasket - 0.032 Inch

T#:31556208

Part#: C4617-032

Back Ordered

$ 96.99 USD

Add to Wish List

Qty

$ 96.99 USD

Add to Wish List

Cometic Head Gasket - BMW N63/S63 - 0.04" Thick

T#:31755177

Part#: C15475-040

Back Ordered

$ 96.99 USD

Add to Wish List

Qty

$ 96.99 USD

Add to Wish List

Cometic is the industry standard when upgrading the head gasket on your high performance BMW. These MLS (Metal Layered Steel) head gaskets are many enthusiasts’ choice when adding more boost or simply bulletproofing your current setup! Designed for high-performance applications, Cometic Head Gaskets are sure to stand up to the task!

Show More Show Less

Cometic Head Gasket - BMW S65B40 - 0.051" Thick

T#:31556169

Part#: C5112-051

Back Ordered

$ 144.99 USD

Add to Wish List

Qty

$ 144.99 USD

Add to Wish List

Cometic is the industry standard when upgrading the head gasket on your high performance BMW. These MLS (Metal Layered Steel) head gaskets are many enthusiasts’ choice when adding more boost or simply bulletproofing your current setup! Designed for high-performance applications, Cometic Head Gaskets are sure to stand up to the task!

Show More Show Less

Cometic Gasket For N54 0.040"

T#:31522941

Part#: C15257-040

Back Ordered

$ 194.99 USD

Add to Wish List

Qty

$ 194.99 USD

Add to Wish List

Performance Cylinder Head Gasket - 0.030 Inch

T#:54388449

Part#: C4308-030

Back Ordered

$ 96.99 USD

Add to Wish List

Qty

$ 96.99 USD

Add to Wish List

When you're building an engine—whether it's a high-revving track beast or a reliable daily driver—you only want to do the job once. Cometic’s Multi-Layer Steel (MLS) head gaskets are engineered to handle the intense cylinder pressures of high-performance applications while providing a bulletproof seal for stock replacements.

Show More Show Less

Cometic Head Gasket - BMW S65B40 - 0.057" Thick

T#:31556170

Part#: C5112-057

Back Ordered

$ 183.99 USD

Add to Wish List

Qty

$ 183.99 USD

Add to Wish List

Cometic is the industry standard when upgrading the head gasket on your high performance BMW. These MLS (Metal Layered Steel) head gaskets are many enthusiasts’ choice when adding more boost or simply bulletproofing your current setup! Designed for high-performance applications, Cometic Head Gaskets are sure to stand up to the task!

Show More Show Less

Cometic Head Gasket - BMW S65B40 - 0.040" Thick

T#:31556166

Part#: C5111-040

Back Ordered

$ 144.99 USD

Add to Wish List

Qty

$ 144.99 USD

Add to Wish List

Cometic is the industry standard when upgrading the head gasket on your high performance BMW. These MLS (Metal Layered Steel) head gaskets are many enthusiasts’ choice when adding more boost or simply bulletproofing your current setup! Designed for high-performance applications, Cometic Head Gaskets are sure to stand up to the task!

Show More Show Less

Cometic Head Gasket - BMW S65B40 - 0.030" Thick

T#:31556165

Part#: C5111-030

Back Ordered

$ 144.99 USD

Add to Wish List

Qty

$ 144.99 USD

Add to Wish List

Cometic is the industry standard when upgrading the head gasket on your high performance BMW. These MLS (Metal Layered Steel) head gaskets are many enthusiasts’ choice when adding more boost or simply bulletproofing your current setup! Designed for high-performance applications, Cometic Head Gaskets are sure to stand up to the task!

Show More Show Less

VTT S65 Billet Valve Cover Set

T#:20749241

Part#: S65BVC

Back Ordered

Starting at $ 1,698.99 USD

Add to Wish List

Starting at $ 1,698.99 USD

Add to Wish List

VTT is proud to announce the S65 Billet Valve cover set. VTT created these for the S65 owner who wants to add a great look to their engine bay while also getting rid of the stock valve cover which are very problematic and can crack/leak/delaminate with higher mileage. Eliminating the leak-prone factory oil cap design with a threaded cap with O-ring Seal, VTT has also added two -10 ORB bungs which allow you complete freedom to plumb in a catch can, or vent system of your choice. The internal baffling is 100% in place to knock down any oil from the vapors before being expelled. Factory PCV has also been kept in place so these can be run in essentially any configuration required. 100% CNC 6061-T6 Aircraft aluminum construction Anodized in a variety of colors Lightweight; 9.7 lbs. (compared to 7.9 lbs for a stock cover – only 1.8 lbs difference) TWO shrouded -10 ORB ports which Give the end-user variety for setting up their Valve Cover and PCV System Only Billet option on the market with a threaded oil cap, and PCV choices Works with our 1' one-way breather for ultimate crankcase venting Kit includes: Two Billet Valve covers Two US-sourced Viton Gaskets

Show More Show Less

Cometic MLS Head Gasket - 87mm Bore - .075in - BMW S50B30US/S52B32 ...

T#:26738396

Part#: C4329-075

Back Ordered

$ 245.99 USD

Add to Wish List

Qty

$ 245.99 USD

Add to Wish List

Multi-Layer Steel gaskets are comprised of multiple embossed layers of both proprietary high-temperature coated and uncoated stainless steel, requiring less clamp load, creating less bore distortion, and conforms load distribution across the sealing area. The embossed outer layers of our head gaskets meet the demands of a variety of harsh sealing environments, load conditions, and surface finishes. The MLS Gasket (Multi-Layer Steel) features an active combustion seal on multiple layers. The stainless steel outer layers utilize FKM (Viton®) rubber coating, a high-temperature and chemical-resistant polymer. A topcoat of PTFE aids in resistance to fret and increased cold sealing.

Show More Show Less

Cometic Head Gasket - BMW S65B40 - 0.027" Thick

T#:31556164

Part#: C5111-027

Back Ordered

$ 144.99 USD

Add to Wish List

Qty

$ 144.99 USD

Add to Wish List

Cometic is the industry standard when upgrading the head gasket on your high performance BMW. These MLS (Metal Layered Steel) head gaskets are many enthusiasts’ choice when adding more boost or simply bulletproofing your current setup! Designed for high-performance applications, Cometic Head Gaskets are sure to stand up to the task!

Show More Show Less

Cometic Head Gasket - BMW S65B40 - 0.080" Thick

T#:31556167

Part#: C5111-080

Back Ordered

$ 189.99 USD

Add to Wish List

Qty

$ 189.99 USD

Add to Wish List

Cometic is the industry standard when upgrading the head gasket on your high performance BMW. These MLS (Metal Layered Steel) head gaskets are many enthusiasts’ choice when adding more boost or simply bulletproofing your current setup! Designed for high-performance applications, Cometic Head Gaskets are sure to stand up to the task!

Show More Show Less

Cometic MLS Head Gasket - 87mm Bore - .120in - BMW S50B30US/S52B32 ...

T#:26738397

Part#: C4329-120

Back Ordered

$ 277.99 USD

Add to Wish List

Qty

$ 277.99 USD

Add to Wish List

Multi-Layer Steel gaskets are comprised of multiple embossed layers of both proprietary high-temperature coated and uncoated stainless steel, requiring less clamp load, creating less bore distortion, and conforms load distribution across the sealing area. The embossed outer layers of our head gaskets meet the demands of a variety of harsh sealing environments, load conditions, and surface finishes. The MLS Gasket (Multi-Layer Steel) features an active combustion seal on multiple layers. The stainless steel outer layers utilize FKM (Viton®) rubber coating, a high-temperature and chemical-resistant polymer. A topcoat of PTFE aids in resistance to fret and increased cold sealing.

Show More Show Less

Cometic Head Gasket - BMW S65B40 - 0.027" Thick

T#:31556168

Part#: C5112-027

Back Ordered

$ 122.99 USD

Add to Wish List

Qty

$ 122.99 USD

Add to Wish List

Cometic is the industry standard when upgrading the head gasket on your high performance BMW. These MLS (Metal Layered Steel) head gaskets are many enthusiasts’ choice when adding more boost or simply bulletproofing your current setup! Designed for high-performance applications, Cometic Head Gaskets are sure to stand up to the task!

Show More Show Less

Cometic MLS Cylinder Head Gasket - .086" - BMW US S50B30/S52B32 ...

T#:9803959

Part#: C4329-086

Back Ordered

$ 262.99 USD

Add to Wish List

Qty

$ 262.99 USD

Add to Wish List

Cometic Head Gasket - BMW N62B44 - 0.027" Thick

T#:31556099

Part#: C4374-027

Back Ordered

$ 128.99 USD

Add to Wish List

Qty

$ 128.99 USD

Add to Wish List

Cometic is the industry standard when upgrading the head gasket on your high performance BMW. These MLS (Metal Layered Steel) head gaskets are many enthusiasts’ choice when adding more boost or simply bulletproofing your current setup! Designed for high-performance applications, Cometic Head Gaskets are sure to stand up to the task!

Show More Show Less

Cometic MLS Head Gasket - 85mm Bore - .12in - M20 2.5L/2.7L

T#:26738369

Part#: C4394-120

Special Order: No Guaranteed ETA

$ 277.99 USD

Add to Wish List

Qty

$ 277.99 USD

Add to Wish List

Multi-Layer Steel gaskets are comprised of multiple embossed layers of both proprietary high-temperature coated and uncoated stainless steel, requiring less clamp load, creating less bore distortion, and conforms load distribution across the sealing area. The embossed outer layers of our head gaskets meet the demands of a variety of harsh sealing environments, load conditions, and surface finishes. The MLS Gasket (Multi-Layer Steel) features an active combustion seal on multiple layers. The stainless steel outer layers utilize FKM (Viton®) rubber coating, a high-temperature and chemical-resistant polymer. A topcoat of PTFE aids in resistance to fret and increased cold sealing.

Show More Show Less

Cometic Head Gasket - BMW N62B44 - 0.051" Thick

T#:31556098

Part#: C4374-051

Back Ordered

$ 152.99 USD

Add to Wish List

Qty

$ 152.99 USD

Add to Wish List

Cometic is the industry standard when upgrading the head gasket on your high performance BMW. These MLS (Metal Layered Steel) head gaskets are many enthusiasts’ choice when adding more boost or simply bulletproofing your current setup! Designed for high-performance applications, Cometic Head Gaskets are sure to stand up to the task!

Show More Show Less

Cometic MLS Head Gasket - 85mm Bore - .040in - M20 2.5L/2.7L ...

T#:26738376

Part#: C4394-040

Back Ordered

$ 229.99 USD

Add to Wish List

Qty

$ 229.99 USD

Add to Wish List

Multi-Layer Steel gaskets are comprised of multiple embossed layers of both proprietary high-temperature coated and uncoated stainless steel, requiring less clamp load, creating less bore distortion, and conforms load distribution across the sealing area. The embossed outer layers of our head gaskets meet the demands of a variety of harsh sealing environments, load conditions, and surface finishes. The MLS Gasket (Multi-Layer Steel) features an active combustion seal on multiple layers. The stainless steel outer layers utilize FKM (Viton®) rubber coating, a high-temperature and chemical-resistant polymer. A topcoat of PTFE aids in resistance to fret and increased cold sealing.

Show More Show Less

Project Cars

SELECT YOUR BMW

Sub-Categories

Upgrade your BMW 135i, 335i, X6, or Z4 with the Cometic 85.5mm Bore .052in MLX Head Gasket.

Select Vehicle

Purpose

Category

Brand

Price

Special Offers

Shipping

Narrow Results