Before ordering, check whether you need round or flat pin connectors for your MINI's coil pack. The type of pin is determined by the connectors that link the coil to the wiring harness. To check, slide the red locking tab to the right, press down on the tab, and pull the connector off the coil. Examine the pins to see if they are flat or round. Reattach the connector by pushing it back on until it clicks, then slide the red locking tab back to the locked position.
This high-performance coil pack is a popular upgrade among MINI owners looking to enhance their vehicle's performance over the stock coil. The installation requires removing the factory bolts from the old coil and modifying the MSD factory sleeves by drilling out 1/16" to fit the stock bolts.
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
Revitalize your Mini's performance with these spark plug wires and boots, designed to restore power and ensure smooth engine operation. Replace them at 60,000-mile intervals to maintain optimal performance. If you experience low spark or misfires and it's not due to the coil or spark plugs, faulty wires may be the culprit. Don't let rust buildup hinder performance—replace these wires to ensure happy motoring and reliable spark.
Group A racecars were the top of their class in both touring car and rally racing. Heavily modified and extremely fast these cars set out to demonstrate the best of what a manufacturer could do on the racetrack. It was the predecessor to the current DTM class racing and set a standard for many other divisions of motorsport to follow.
One of the weaker points of the S14 engine, when speaking from a racing standpoint is the belt drive system. While fine for a street going car, a V-belt is not suitable for high RPM applications. On the track, most of your time will be spent in the higher rev range which puts extreme amounts of stress on the factory setup. BMW realised this and came up with a solution that involved doing away with the V belt system and using a 6 rib serpentine style instead.
Extremely resistant to slippage and failure this design holds up much better the abuse of track duty and won't leave you stranded and waiting for tow back to the pit. Additionally, this kit does not accommodate and a/c compressor and the alternator and waterpump are underdriven by way of slightly larger pulleys. Combined, this puts less of a load on the crankshaft which leads to more efficient power delivery to the ground. If you track you E30 M3, this is an essential upgrade and until now was extremely difficult to source. Do not skip this pivotal step in your engine build or overhaul and get a leg up on the competition the Group A way.
Please note this kit is special order and in non-returnable
Features:
This kit fits the following BMWs:
1986-1992 BMW M3 All
