Find Parts That Fit Your Vehicle

BMW Engine Parts

Turner Motorsport has everything you need to upgrade your BMW through our stages of performance or to keep your car in peak condition with our range of the latest in proven OEM cooling parts. Upgrade your cooling system and engine performance with the selections below to give your BMW a performance and reliability advantage.

Sub-Categories

Sort By:

Macht Schnell - Corporate Logo
T#:593749
Part#: 10.00.011
In Stock
$ 349.00 USD
Free Shipping
$ 349.00 USD
Free Shipping
Free additional power to your M3’s rear wheels without sacrificing or compromising your BMW’s reliability. Machined from 6061-T6 aerospace aluminum, Macht Schnell Performance Underdrive Pulleys are strong as well as lightweight to limit parasitic drag from the accessories within a moderate level for maximum performance on or off the track. After machining and engraving, pulleys are then T3 hard anodized for additional strength, anti-corrosion & wear resistance. Our DualDrive design replaces the Crank Accessory & Power Steering Pulleys, resulting in an additional 9-14 HP and 7-9ft. lbs TQ gain for the M3. Gains are due to a reduction in power required to turn accessories; an increase in accessories lifespan due to lower speed will also result. All factory harmonics/balancing are undisturbed. Macht Schnell Performance Underdrive Pulleys have no negative effect on accessory operation and comes fully equipped with new belts. Already have this kit and need new belts? See T#14491 and T#14489 Performance Underdrive Pulleys Features: DualDrive design allows maximum performance, with minor effect on accessory speed Proper cooling temperatures are retained at proper levels on or off the track Maintains proper alternator speed, allowing sustained levels to sensitive control modules Machined from 6061-T6 aerospace aluminum T3 Hard-Anodized for maximum strength and corrosion/wear resistance No affects to crankshaft dampening or harmonics Simple bolt-on installation
Show More Show Less
Innovate Motorsports - Corporate Logo
T#:28836410
Part#: 38770
In Stock at Vendor
$ 212.99 USD
Free Shipping on orders $49 and up

Features & Benefits:

Two configurable linear 0-5V analog outputs Ability to calibrate O2 sensors for maximum accuracy Includes LC-2 controller and Bosch wideband O2 sensor Comes with a program cable, manual, and a 10 ft. sensor cable Includes a 1-inch mild steel exhaust bung Innovate MTS serial in/out capability Integrated dual-color status LED (green/red) Patented DirectDigital™ wideband sensor control Positive lock connectors for all connections Real-time display data on screen or with the powerful LogWorks software Range:

AFR (Air-Fuel Ratio) range from 7.4:1 to 22.4:1 (0.5 to 1.5 lambda)

Show More Show Less
AUTOTECKNIC - Corporate Logo
T#:39971047
Part#: BM-0007
In Stock
$ 64.99 USD
Free Shipping on orders $49 and up
a precision-engineered, lightweight dry carbon fiber upgrade designed to enhance the engine bay of compatible BMW models with an aggressive motorsport look and easy OEM-style installation.

AUTOTECKNIC - Corporate Logo
T#:39971051
Part#: BM-0032
In Stock
$ 64.99 USD
Free Shipping on orders $49 and up
A premium dry carbon fiber engine bay upgrade that enhances the performance styling of compatible BMW models with a sleek, UV-resistant finish and easy OEM-style installation.

Genuine BMW - Corporate Logo
T#:402828
Part#: 07119905428KT
In Stock
$ 21.99 USD
Free Shipping on orders $49 and up

This genuine BMW replacement oil drain plug with washer is perfect to replace your old beat up or stripped oil plug for easy removal and oil changes.


Genuine BMW Screw Plug
This item fits the following BMW Chassis:
E70 X5M,E71 X6M,E53 48IS,E38,E39,E53 X5 X5,E63,E65,E70 X5,E71 X6,F01,F02,F06,F10,F12,F13,F15,F16

Show More Show Less
AUTOTECKNIC - Corporate Logo
T#:46203538
Part#: ATK-BM-0408-V2
Ships in 7 Business Days
$ 795.00 USD
Free Shipping on orders $49 and up
Transform your G8X engine bay into a true centerpiece with the AutoTecknic Version II Dry Carbon Fiber Engine Cover. Expertly crafted using pre-preg dry carbon and cured in an autoclave, this cover offers a lightweight yet durable upgrade that elevates both performance and aesthetics. The precision 3K twill weave carbon delivers a flawless, uniform pattern, enhanced by a deep gloss UV-resistant clear coat for long-lasting protection against fading and yellowing. What sets this Version II cover apart is the bold tri-colored ///M-inspired stripes, perfectly integrated into the design. Combined with the iconic ///M emblem, the cover captures BMW’s motorsport heritage while adding a modern, aggressive edge to your engine bay. Every detail is engineered for a seamless OEM fit—simply transfer the factory M emblem for a complete installation. Upgrade your G80 M3 or G82/ G83 M4 with this stunning centerpiece and let your engine bay reflect the same dynamic spirit as the car itself.
Show More Show Less

AUTOTECKNIC - Corporate Logo
T#:39971046
Part#: BM-0006-BCG
In Stock
$ 65.00 USD
Free Shipping on orders $49 and up
AutoTecknic - Carbon Competition Fuel Cap Cover - Various BMW and MINI Models is a premium exterior upgrade crafted from genuine carbon fiber, designed to enhance the aggressive styling and performance aesthetic of compatible BMW and MINI vehicles with an easy, OEM-fit installation.
Show More Show Less
Innovate Motorsports - Corporate Logo
T#:22558994
Part#: INN3904
In Stock at Vendor
14% off MSRP $ 313.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 269.00 USD
Free Shipping on orders $49 and up
14% off MSRP
$ 313.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 269.00 USD
Free Shipping on orders $49 and up

Introducing the Innovate Motorsports MTX Digital Series "Dual Function" Gauges – now available! These 2 1/16" (52mm) gauges come with interchangeable faceplates and bezels, locking connectors for simplified installation, and MTS serial connections for seamless integration with other Innovate devices for data logging.

DISPLAY RANGE

  • Ethanol Content %: 0-100%
  • Temperature: -40-257 °F (-40-125°C)

KEY FEATURES

  • Ethanol Content
  • Error reporting for ethanol content sensor (Digital Display)
  • Fuel Temperature
  • Customizable exterior LED display
  • Programmable exterior LED color options
  • Selectable unit of measure in °F or °C
  • Programmable fuel temperature warning (outer LED)
  • 2-Configurable analog outputs
  • Ethanol Content: 0v = 0%, 5v = 100%
  • Fuel Temperature: 0v = -40 °F, 5v = 257 °F (-40-125°C)

MTX-D: Ethanol Content Percentage & Fuel Temp Gauge Kit includes Gauge (Black Faceplate, Black Bezel), Silver Bezel & White Faceplate, Harness, Program Cable (Serial), Ethanol Content Sensor, Quick Start Installation Guide.

Please note that this is a universal fitment gauge, and installation may vary depending on the vehicle.

Show More Show Less

Packaged by Turner - Corporate Logo
T#:22097556
Part#: 6PK1548TKT
Ships in 9 Business Days
$ 129.99 USD
Free Shipping on orders $49 and up
Eliminate your squeaking accessory belt pulley and cracked drive belt with this upgraded accessory belt service kit! This kit includes the ECS Kevlar Reinforced Accessory Belt, tensioner assembly, and your idler pulley. ECS Tuning's Red Kevlar Accessory Belts are both an aesthetic improvement and a performance alternative to a traditional belt. Kevlar-reinforced belts experience less elongation over time minimizing the amount of belt adjustment needed as well as offering a higher shock and impact resistance compared to OEM-style belts. Refreshing the rollers and/or tensioners simultaneously is a great way to ensure all vital components of your drive belt system are functioning optimally for years to come!
Show More Show Less

Packaged by Turner - Corporate Logo
T#:224335
Part#: TMS224335
In Stock at Vendor
$ 1,684.00 USD
$ 1,684.00 USD
2007-2010 E90/E92/E93 335i N54 Stage 1+ Performance Package
Peak Power Gain*: up to 103hp / 108ft-lbs
+ aFe Pro5R Dual Cone Intake
+ Wagner Front Mount Intercooler
+ Cobb AccessPort programmer


More power = more heat. It's easy to make more power one time but to continue making that power consistently requires careful planning and design. With the additional boost the air entering the engine is also warmer, making the intercooler more important than ever. In testing, the stock BMW intercooler was quickly overwhelmed and cannot keep the intake air cool enough. The engine computer recognizes that and dials back the boost. A more efficient intercooler will keep boost levels up, delivering consistently higher boost levels. The Stage 1+ package includes a Wagner Evo I plug and play intercooler upgrade. We get great feedback from our customers and technicians about the Wagner FMIC - it's a direct bolt in part using all of the factory piping and it offers 85% more surface area than the factory intercooler.

The aFe Dual Cone intake and Cobb Accessport programmer complete the Stage 1+ package. The larger surface area of the aFe cone filters allows more air to enter the engine - creating more power and torque, a richer engine sound, and better throttle response. The kit is supplied complete with aFe Pro5R filters, mounting shield, intake tubes, sealing materials, hardware, and install instructions. The torque increase and sound from the open intake from low-mid RPM is sensational.

The Cobb software tool puts multiple tuning stages in the palm of your hand. Our Stage 1+ package lines up with the Cobb Stage 1 tuning maps for an intake and FMIC (91 or 93+ octane fuel). Simply download the Stage 1+ map from the Cobb website, plug it in, and install. Select different maps for other upgrades, throttle settings, octane ratings, valet mode, or revert back to stock! If you're moving up in Stages simply download a new file from the Cobb website and update your AccessPort programmer! The AccessPort triples as a diagnostic tester/reader and a data logger. It's the most feature-packed programmer on the market today.

We have taken the guesswork out of choosing the best upgrades for the N54 engine. If you follow the upgrade path we have laid out you will have very satisfying and reliable results. The addition of the larger intercooler makes Stage 1 more enjoyable and won't let you down at the track or dragstrip. * Note that peak power gains are quoted remain the same as Stage 1 but the cooler intake air means there is less of a chance the engine computer will cut power from heatsoak.

This item fits the following BMWs:
2007-2010 E90 BMW 335i 335xi 335i xDrive - Sedan
2007-2010 E92 BMW 335i 335is* 335xi 335i xDrive - Coupe
2007-2010 E93 BMW 335i - Convertible
* 335is horsepower gains are lower due to the factory power boost in the "is" package
Show More Show Less
AUTOTECKNIC - Corporate Logo
T#:21045518
Part#: ATK-BM-0006-BC
Ships in 7 Business Days
$ 65.00 USD
Free Shipping on orders $49 and up
Do you ever go to fill up your car and look at your gas cap and feel like something is missing? Well here you are, the AUTOTACKNIC dry carbon fuel filler cap is here is here to give your old filler cap some high quality personality! Crack a smile every time you open your gas cap!
Show More Show Less
AUTOTECKNIC - Corporate Logo
T#:21045545
Part#: ATK-BM-0408-G87
Ships in 7 Business Days
$ 795.00 USD
Free Shipping on orders $49 and up
AutoTecknic's dry carbon fiber engine cover features high-quality carbon fiber that aesthetically improves the engine bay appearance. This engine cover is made of 3K twill weave pre-preg carbon fiber that creates the beauty of a uniform pattern that only dry carbon could achieve.
Show More Show Less


AUTOTECKNIC - Corporate Logo
T#:21209809
Part#: ATK-BM-0008-G42-
Ships in 7 Business Days
$ 65.00 USD
Free Shipping on orders $49 and up
Add some beautiful carbon details to your engine bay starting with your oil filler cap! Made from high-quality autoclave pressed dry carbon, this cap is not has a consistent beautiful weave, its highly durable and can stand the test of time! Dry carbon fiber is formed using a "pre-preg" or impregnated piece of carbon materials. This piece of carbon is first placed into a mold and then into a sealed vacuum (autoclave) to properly cure. This method creates the least amount of waste and forms a lighter version of carbon than the "wet" method. The autoclave vacuuming process of making dry carbon means fewer pinholes and virtually no air pockets in the carbon. Dry carbon is the highest-quality version of carbon fiber products that are produced. On top of that they coat this product in a UV resistant coating extending the life of this cap significantly! Don't wait and get yours today! You will not be disappointed by the fit and finish!
Show More Show Less
AUTOTECKNIC - Corporate Logo
T#:39329307
Part#: BM-0388-DCG
Ships in 7 Business Days
$ 650.00 USD
Free Shipping on orders $49 and up
Perfect for BMW G80 M3 and G82/G83 M4 owners seeking a refined and aggressive engine bay upgrade, the AutoTecknic Dry Carbon V2 Engine Bay Trim Set delivers a flawless combination of style, durability, and performance.
Show More Show Less
AUTOTECKNIC - Corporate Logo
T#:39295568
Part#: BM-0385
Ships in 7 Business Days
$ 495.00 USD
Free Shipping on orders $49 and up
Designed for BMW F95 X5M and F96 X6M owners seeking an elevated under-hood appearance, the AutoTecknic Dry Carbon Engine Cover delivers premium styling and race-inspired refinement.

AUTOTECKNIC - Corporate Logo
T#:21012623
Part#: ATK-BM-0420-G87
Ships in 7 Business Days
$ 495.00 USD
Free Shipping on orders $49 and up
The boldly styled G87 already touts carbon features but carbon fiber is not very often displayed in the engine bay. If you are looking to give your engine bay some carbon spark, AUTOTECKNIC introduces you to their dry carbon battery terminal cover to beautify your engine bay and bring a smile to your face every time you open the hood of your S58 monster! Made from high-quality carbon, this product is sure to stand the test of time!
Show More Show Less

AUTOTECKNIC - Corporate Logo
T#:39497962
Part#: BM-0707
Ships in 7 Business Days
$ 549.99 USD
Free Shipping on orders $49 and up
Turner Motorsport offers this high-quality AutoTecknic Pre-Preg Carbon Engine Cover, ensuring BMW X3M and X4M owners can upgrade their vehicle with a refined, performance-oriented aesthetic.
AUTOTECKNIC - Corporate Logo
T#:39329324
Part#: BM-0408
Ships in 7 Business Days
$ 795.00 USD
Free Shipping on orders $49 and up
Experience the power of premium dry carbon fiber and make a bold statement on the road. Upgrade your G87 M2 with confidence and unleash the true potential of your engine with this exquisite dry carbon fiber cover.
Show More Show Less

AUTOTECKNIC - Corporate Logo
T#:396229
Part#: BM-0401
Ships in 7 Business Days
$ 549.99 USD
Free Shipping on orders $49 and up
Don't let your engine bay bore you. A carbon fiber engine cover makes your bay adds a sporty look instantly. We use vacuum technology to ensure every engine cover fits just like OEM. Uses rubber mounts from factory engine cover.
Show More Show Less
AUTOTECKNIC - Corporate Logo
T#:5189192
Part#: TO-0407
Ships in 7 Business Days
$ 550.00 USD
Free Shipping on orders $49 and up
AutoTecknic was established in 2000 and has since become one of the largest manufacturers and distributors of carbon fiber parts and accessories for a wide variety of manufacturers. AutoTecknic's dry carbon fiber engine cover features high-quality carbon fiber that aesthetically improves the engine bay appearance. This engine cover is made of 3K twill weave pre-preg carbon fiber that creates the beauty of a uniform pattern that only dry carbon could. achieve. Dry carbon fiber's name also comes from its manufacturing process. Dry carbon fiber is formed by using a "pre-preg" or impregnated piece of carbon materials. This piece of carbon is first placed into a mold, and then into a sealed vacuum (autoclave) to properly cure. This particular method creates the least amount of waste and forms a lighter version of carbon than the “wet” method. The autoclave vacuuming process of making dry carbon means that there are fewer pinholes and virtually no air pockets that form in the carbon. Dry carbon is the highest quality version of carbon fiber products that are produced.
Show More Show Less

AUTOTECKNIC - Corporate Logo
T#:39329331
Part#: BM-0420-S
Ships in 7 Business Days
$ 495.00 USD
Free Shipping on orders $49 and up
Elevate your BMW's style and performance with the AutoTecknic Dry Carbon Fiber ECU Battery Terminal Cover (Satin Finish) – the ultimate choice for discerning enthusiasts.

AUTOTECKNIC - Corporate Logo
T#:21275553
Part#: ATK-TO-0407
Ships in 7 Business Days
$ 550.00 USD
Free Shipping on orders $49 and up
Carbon fiber is a staple in the performance world and has been incorporated into motorsports since the early 80s. Over time companies have taken it upon themselves to create new carbon products to add to your car that may have not been originally available. Autotecknic is no different. If you're looking for a carbon addition that has been made to the highest standards with premium materials, then Autotecknic's line of carbon additions is your one-stop shop. Stand out from the rest when you open your hood with this full carbon fiber engine cover for the A90 Supra! Dry carbon fiber's name comes from its manufacturing process. Dry carbon fiber is formed by using a "pre-preg" or impregnated piece of carbon materials. This carbon is first placed into a mold, and then into a sealed vacuum (autoclave) to properly cure. This method creates the least amount of waste and forms a lighter version of carbon than the “wet” method. The autoclave vacuuming process of making dry carbon means fewer pinholes and virtually no air pockets in the carbon. Dry carbon is the highest-quality version of carbon fiber products that are produced.
Show More Show Less
AUTOTECKNIC - Corporate Logo
T#:39329329
Part#: BM-0420-G
Ships in 7 Business Days
$ 495.00 USD
Free Shipping on orders $49 and up
Elevate your BMW's style and performance with the AutoTecknic Dry Carbon Fiber ECU Battery Terminal Cover – the ultimate choice for discerning enthusiasts.
AUTOTECKNIC - Corporate Logo
T#:21045531
Part#: ATK-BM-0008-G8X-
Ships in 7 Business Days
$ 65.00 USD
Free Shipping on orders $49 and up
Add some beautiful carbon details to your engine bay starting with your oil filler cap! Made from high-quality autoclave pressed dry carbon, this cap is not has a consistent beautiful weave, its highly durable and can stand the test of time!
Show More Show Less


AUTOTECKNIC - Corporate Logo
T#:39971048
Part#: BM-0008
Ships in 7 Business Days
$ 64.99 USD
Free Shipping on orders $49 and up
A precision-crafted dry carbon fiber upgrade that enhances the engine bay of compatible BMW and MINI vehicles with a lightweight, motorsport-inspired design and easy OEM-style installation
Bosch - Corporate Logo
T#:47679243
Part#: 501-0116
Ships in 7 Business Days
$ 884.99 USD
Free Shipping on orders $49 and up
$ 884.99 USD
Free Shipping on orders $49 and up
The Black Market Parts Genuine Bosch Motorsports EV14 fuel injectors featuring USCAR (EV6) connector matched and packaged in a pack of 6 units. Direct plug-in for Motiv Reflex, AIC, and Nexsys Motorsports
Show More Show Less