Enhance your BMW's performance with this comprehensive valve cover assembly, complete with a sealing gasket and engine cover mounts.

• Key Benefits:
  • Comprehensive valve cover assembly for BMW engines
  • Includes sealing gasket for optimal performance
  • Engine cover mounts ensure a secure fit
  • Enhances overall engine efficiency and longevity

This crank shaft position sensor provides the ECU with the engine speed signal. A faulty sensor could cause reduced performance, ignition issue, or even damage directly to internal components of your engine. An OEM Hella replacement ensures long life and is the best option to get your engine running smoothly again. It fits BMW E36 325i 325is 325ic M3 1992-1995 and E34 525i 1991-1995 with M50 engine.

Hella is a premium manufacturer that supplies automotive parts to numerous car brands across the world. Everything from electrical to mechanical genuine parts have been made and supplied directly to BMW before the vehicles ever leave the production floor. Their high quality, long lasting parts have made them a trusted brand chosen to help keep your BMW on the road for many years to come.

As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

This item fits the following BMWs:
1992-1995 E36 BMW 325i 325is 325ic M3
1991-1995 E34 BMW 525i

Turner Motorsport presents the Crankcase Ventilation System Refresh Kit for BMW owners experiencing malfunctioning or aged CCV systems. This comprehensive kit includes all necessary hoses to complete a refresh, ensuring optimal performance and reliability for your BMW's CCV system.

• Addresses malfunctioning CCV systems
• Ensures proper ventilation of the crankcase
• Comprehensive kit includes all necessary hoses
• Restores performance and reliability
• Compatible with various BMW models

Enhance your BMW N54 3.0L engine with the Valve Cover Replacement Kit. This comprehensive kit includes a complete valve cover assembly with a gasket, bolts, and integral cyclone separator. Ensure optimal engine performance and prevent leaks with this high-quality replacement kit designed specifically for the N54 engine.

• Valve Cover Replacement Kit for BMW N54 3.0L
• Complete assembly with gasket, bolts, and integral cyclone separator
• Ensures optimal engine performance
• Prevents leaks for enhanced reliability
• Quality components for long-lasting durability

Don't neglect your motor mounts! Most stock BMW motor mounts are fluid filled and the stiffness of the mount depends on this fluid. But over time the fluid leaks out and the strength of the mount is greatly reduced. A worn motor mount allows the engine to twist and shift around. The harder you're driving the more shift will occur. As the engine is moving around it can contact other parts in the engine bay - usually cooling related. The mechanical fan can hit the radiator; the A/C compressor can hit a radiator hose, the exhaust will flex and may break. Twisting of the engine can also lead to shifting problems as the transmission twists with it. There are countless issues related to worn or compressed motor mounts so don't overlook these as a regular replacement item (every 50,000 miles).

As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

This item fits the following BMWs:
E60 BMW 5 Series - 525i 528i 530i 535i

Often called main bearings, crankshaft bearing shells sit between the rotating assembly and the engine block. They allow the crankshaft to rotate freely, but are prone to wear from deterioration and lack of lubrication.

This complete set consists of nine bearings, enough to fill each journal.

If you're overhauling your M10, choose Hella crankshaft-bearing shells for a lasting solution.

Don't neglect your motor mounts! Most stock BMW motor mounts are fluid filled and the stiffness of the mount depends on this fluid. But over time the fluid leaks out and the strength of the mount is greatly reduced. A worn motor mount allows the engine to twist and shift around. The harder you're driving the more shift will occur. As the engine is moving around it can contact other parts in the engine bay - usually cooling related. The mechanical fan can hit the radiator; the A/C compressor can hit a radiator hose, the exhaust will flex and may break. Twisting of the engine can also lead to shifting problems as the transmission twists with it. There are countless issues related to worn or compressed motor mounts so don't overlook these as a regular replacement item (every 50,000 miles).

As a leading source of high-performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts. All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

Super SF56 Upgraded Turbocharger - New by JM Turbo Cooper is the ultimate performance upgrade for BMW enthusiasts. Engineered for both street and track use, this turbocharger features a massive 50mm compressor and upgraded 9-blade lightened high-flow turbine. It delivers quick full boost and significant power gains throughout the RPM range, maintaining quick response and enhancing torque and power over the original turbo.

• Massive 50mm billet compressor for increased airflow
• Upgraded 9-blade lightened turbine for improved performance
• High-strength internals and upgraded 360-degree bearing
• Designed for higher pressure and temperature alloy turbine housing
• Water-cooled bearing housing for durability
• Quick spooling dual scrolling housing for optimal response

Upgrade your BMW with the Super SF56 Upgraded Turbocharger for unparalleled performance and power gains.