Turbos

MAC Single Turbo Boost Solenoid - N54 N55

Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply

T#:587715

Part#: MACSTS

In Stock

$ 51.99 USD

Add to Wish List

Qty

$ 51.99 USD

Add to Wish List

Use this plug and play low frequency MAC solenoid if retrofitting a single turbo kit to your N54 or N55. Includes plug and play harness connector for no splicing!

BMS High Flow Silicone Turbo Inlet - BMW N55 F2X F3X F87

Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply

T#:43109033

Part#: BMS-HFSTI-FN55

Back Ordered

$ 199.00 USD

Add to Wish List

Qty

$ 199.00 USD

Add to Wish List

Burger's replacement heavy-duty silicone turbo inlet replaces the narrow and crack-prone factory plastic unit with a higher flowing silicone inlet with billet aluminum fittings. Unlike other inlets, this inlet retains a larger flow straight from intake to turbo for improved boost response and increased turbo efficiency. While beneficial with the factory turbo, this inlet is a must-have with any larger than factory turbo and the perfect complement to the BMS N55 intake systems.

Show More Show Less

MINI R56 Forge Motorsport Turbo Blanket

Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply

T#:589672

Part#: FMTUBL4

In Stock

Sale - Save 10% $ 187.99

This product was last offered at the strikethrough price on
10-26-2026

$ 168.35 USD

Add to Wish List

Qty

Sale - Save 10%

$ 187.99

This product was last offered at the strikethrough price on
10-26-2026

$ 168.35 USD

Add to Wish List

**The turbo blanket can change color hue due to production batches ** It has not been installed or run prior. The Forge Motorsport FMTUBL4 has been specifically designed for the MINI R55-R61 Cooper S/JCW stock turbo charger. This turbo blanket is designed to isolate the radiant heat produced by the turbocharger. The stock MINI heat shield is inadequate and can result in warping the standard air scoop located in the bonnet. This design has been created to withstand the harshest of environments and proven to withstand temperatures up to 2500 °f of radiant heat which will assist in protecting and prolonging the life of engine components. Design innovation keeps the heat of the exhaust gases contained within the hot side of the turbocharger, away from the cool side and the intake path which helps reduce turbo lag and air intake temperatures resulting in more power. Please note that a turbo blanket will lose its flexibility over the first few heat cycles as the material cures, so once fitted it should not be routinely removed as this can cause damage to the blanket. It can also change color due to heat cycles.

Show More Show Less

TurboSmart OPR V2 Oil Pressure Regulator

Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply

T#:28504207

Part#: TS-0811-0012

In Stock at Vendor

10% off MSRP $ 189.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 170.99 USD

Add to Wish List

Qty

10% off MSRP

$ 189.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 170.99 USD

Add to Wish List

Introducing Turbosmart’s OPR V2 Turbocharger Oil Pressure Regulator, a cutting-edge solution launched in 2022 that ensures steady oil pressure for your turbocharger. This innovative regulator features a return-less design with an integrated 44 Micron Stainless Steel Mesh Oil Filter, providing robust performance and protection.

The OPR V2 is the first of its kind, utilizing Turbosmart’s proprietary flow control method to maintain optimal oil pressure regardless of engine oil variables like pressure or temperature. It guarantees a smooth oil flow to your turbocharger, safeguarding critical components such as Exhaust Drive, Back & Charge Pressures from excessive oil pressure that could lead to oil consumption and smoke.

Gone are the days of guesswork with restrictors and complex plumbing for oil pressure regulation. The OPR V2 simplifies the process with its return-less, inline installation and the convenience of a built-in 44 Micron Oil Filter. This filter, made of serviceable and replaceable Stainless Steel Mesh, adds an extra layer of defense against engine oil debris that could harm your turbocharger.

Key Features:

Innovative Patent Pending Design Durable Aluminium (6262 T6) Anodised Body & Valve Regulated Oil Pressure Compatible with Most turbochargers Integrated Stainless Steel (304) Mesh Oil Filter -4AN Inlet and Outlet for easy installation 1/8 NPT Sensor/Gauge Port for monitoring Directional Inlet Feed Logic for optimized performance Laminar Flow Output for consistent oil delivery Compatible with all Engine Oils Designed and Manufactured in Australia

Show More Show Less

Coolant Port Block Off Plugs for N54 Single Turbo Conversion ...

Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply

T#:23880741

Part#: N54STCCPBO

In Stock

$ 30.00 USD

Add to Wish List

Qty

$ 30.00 USD

Add to Wish List

If you're installing a single turbo kit on your N54-powered BMW, you'll need to block off the two coolant ports on the exhaust side of the engine block. This kit contains high-quality billet aluminum plugs for both the front and rear location factory coolant feed locations.

Show More Show Less

Turbosmart BMW N20 VIWG Wastegate Actuator - 6inHg

Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply

T#:35053713

Part#: TS-0604-1067

In Stock

10% off MSRP $ 252.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 227.99 USD

Limited Qty Sale

Add to Wish List

Qty

10% off MSRP

$ 252.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 227.99 USD

Limited Qty Sale

Add to Wish List

Turbosmart BMW N20 VIWG Wastegate Actuator - 6inHg is designed to enhance turbo performance and boost control on BMW N20 engines, delivering improved reliability and responsiveness. This high-quality actuator replaces the factory wastegate actuator, providing better stability and minimizing boost leaks under demanding conditions. Ideal for enthusiasts looking to optimize their BMW’s turbo efficiency, this actuator offers superior control and durability.

Designed specifically for BMW N20 engines
Boost control enhancement for increased performance and responsiveness
6inHg spring for precise pressure control
Robust construction reduces the risk of boost leaks
Manufactured by Turbosmart, a trusted brand in performance turbo components
Compatible with a variety of BMW models, ensuring a perfect fit
Available through Turner Motorsport

With Turbosmart’s high-performance design, the BMW N20 VIWG Wastegate Actuator - 6inHg is a perfect choice for drivers looking to upgrade their turbo system. This wastegate actuator is engineered for those who demand better boost stability, control, and overall performance from their vehicle.

Show More Show Less

Burger Motorsports Blow Off Valve Adapter - Gen3 B58

Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply

T#:38655170

Part#: BMS-BOVA-G3B58

In Stock

$ 99.00 USD

Add to Wish List

Qty

$ 99.00 USD

Add to Wish List

The Burger Motorsports Blow-Off Valve (BOV) Adapter for Gen3 BMW B58TU2 installs between the OE bypass solenoid and the vehicle, venting unused charge air to the atmosphere for the iconic "Pshhhh" turbo sound that enthusiasts love.

Show More Show Less

Blue WG38 Gen V Ultra-Gate 38 - 14PSI

Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply

T#:22591972

Part#: TS-0551-1011

In Stock at Vendor

10% off MSRP $ 430.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 387.99 USD

Add to Wish List

Qty

10% off MSRP

$ 430.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 387.99 USD

Add to Wish List

The Gen V WG38 Ultra-Gate 38 external wastegate is your cost-effective, high-performance solution. This 38mm external wastegate is meticulously designed for hassle-free bolt-on applications that make use of the 2-bolt flange.

Show More Show Less

Manual Boost Controller - Black

Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply

T#:22756715

Part#: FMICB051

In Stock

Sale - Save 11% $ 78.99

This product was last offered at the strikethrough price on
10-26-2026

$ 70.34 USD

Add to Wish List

Qty

Sale - Save 11%

$ 78.99

This product was last offered at the strikethrough price on
10-26-2026

$ 70.34 USD

Add to Wish List

Forge presents a high-quality in-car boost controller, designed to cater to enthusiasts looking to precisely adjust their boost levels from within the comfort of their vehicle. This controller is suitable for use with any turbocharged vehicle equipped with either an internal or external wastegate, provided it operates using vacuum/boost control. Please note that this product includes the controller valve only and does not include lines or connections.

Show More Show Less

Forge B58 Charge Pipe Set - All B58

Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply

T#:586966

Part#: FMBP3

Ships on Nov 18, 2026

Sale - Save 10% $ 626.99

This product was last offered at the strikethrough price on
10-26-2026

$ 564.27 USD

Add to Wish List

Qty

Sale - Save 10%

$ 626.99

This product was last offered at the strikethrough price on
10-26-2026

$ 564.27 USD

Add to Wish List

BMWs, OEM charge pipe can become brittle and will generally fail under increased boost pressure. To combat this, Forge has developed a replacement with an increased diameter which helps to reduce turbulence and maximize airflow into the engine.

Show More Show Less

MINI Cooper S Intercooler Resonator Delete Hose - Black

Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply

T#:23449715

Part#: FMR56RDH

Ships in 4 Business Days

Sale - Save 10% $ 184.99

This product was last offered at the strikethrough price on
10-26-2026

$ 166.41 USD

Add to Wish List

Qty

Sale - Save 10%

$ 184.99

This product was last offered at the strikethrough price on
10-26-2026

$ 166.41 USD

Add to Wish List

Elevate your 2007 onwards MINI Cooper S with the Intercooler Resonator delete hose, expertly crafted to replace the OEM hoses and sound resonator. Forge's innovative design enhances torque and horsepower, offering a smoother bore to reduce resistance. When combined with additional modifications such as tuned software or exhaust upgrades, this hose delivers enhanced acceleration. Choose from red, blue, or black options for a durable, stealthy installation capable of withstanding high temperatures and pressures.

Show More Show Less

Eventuri Carbon Turbo Inlet Set - F95/96 G09 G05 G06 G07 Pre-LCI ...

Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply

T#:32118904

Part#: EVE-X56M-CHG

Ships in 6 Business Days

$ 695.00 USD

Add to Wish List

Qty

$ 695.00 USD

Add to Wish List

Presenting the perfect addition to our X5M, XM intake system to optimize the flow path all the way to the turbos. Our carbon inlets have a larger volume than the stock inlets by maintaining a larger diameter all the way to the turbos. The stock inlets narrow down immediately after the connection to the intake which creates a restriction especially at higher boost levels. We have alleviated this restriction and also designed the curvature to be as smooth as possible allowing the turbos to function with reduced resistance. Made from prepreg carbon fiber with CNC machined flanges, the inlets also provide an aesthetic improvement to the engine bay. Benefits of the inlets are apparent with tuned vehicles where the boost pressure is higher and therefore the flow demand form the turbos is greater. This is where the larger volume of the carbon inlets help provide that extra flow. The performance gains are produced from providing the turbos with a less resistive flow path which allows them to reach peak boost sooner in the RPM range. When comparing to the stock inlets the differences are clear to see. Where the stock tubes narrow down immediately after the connection to the intakes, our tubes maintain a larger diameter and the reduction to the stock turbos is achieved with an internal radius on the machined flanges. This allows for larger volume whilst maintaining a smooth flow path. One of the drawbacks of the oversized inlets was the more aggressive reduction in size to match the stock turbos which created some flow constraints. NOTE: Some photos show our optional F9X X5M / X6M / G09 XM / G0X M60i Intake system available separately. Each inlet inlet set consists of: Prepreg Carbon Inlet Pair CNC Machined Turbo Flanges CNC Machined Breather Valve Assembly Compatible Models: F95 X5M Pre-LCI F96 X6M Pre-LCI G09 XM Pre-LCI G05 X5 M60i Pre-LCI G06 X6 M60i Pre-LCI G07 X7 M60i Pre-LCI ** This item is not eligible for return **

Show More Show Less

Turbosmart Boost Reference Adapter

Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply

T#:598851

Part#: TS-0720-1006

Ships on Nov 13, 2026

10% off MSRP $ 60.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 54.99 USD

Add to Wish List

Qty

10% off MSRP

$ 60.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 54.99 USD

Add to Wish List

Turbo Oil Feed Line

Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply

T#:13463755

Part#: TURBOFL

Ships on Nov 13, 2026

$ 26.99 USD

Add to Wish List

Qty

$ 26.99 USD

Add to Wish List

Rally Road has created the perfect turbo oil feed line specifically made for the M50 series motor with top mount turbo manifold. This line is braided stainless steel on the outside and Teflon on the inside for maximum rigidity .

Show More Show Less

Vanos Banjo Oil Supply Fitting

Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply

T#:13463756

Part#: VANOSBOSF1

Ships on Nov 20, 2026

$ 27.99 USD

Add to Wish List

Qty

$ 27.99 USD

Add to Wish List

The easiest way to supply your turbo or supercharger with oil!

FTP Motorsport Boost Fitting - N20/N55

Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply

T#:582217

Part#: SG80036

Special Order: No Guaranteed ETA

$ 40.00 USD

Add to Wish List

Qty

$ 40.00 USD

Add to Wish List

If you are planning on running additional boost, keeping tabs on the level is going to be an important factor. For doing this you have many options...Apps, scanners, coding. But what about a good old mechanical gauge? Now you can add one the easy way with this sandwich plate adapter from FTP. Simply remove the factory boost sensor install the plate, re-bolt the boost sensor and you're done.

Show More Show Less

N55 Big Turbo Upgrade - F2X / F3X / F87 M2

Call In Or Chat For Best Price! 10X Entries Into Our F80 M3 Sweepstakes Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply
CARB certified for sale in all 50 states

T#:15544960

Part#: D310-0110A

EO#: D-176-52

Back Ordered

Sale - Save 14% $ 1,980.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 1,709.96 USD

Add to Wish List

Qty

Sale - Save 14%

$ 1,980.99

This product was last offered at the strikethrough price on
06-24-2026

$ 1,709.96 USD

Add to Wish List

Elevate Turbocharger Performance with Upgraded Kit

Upgrade your turbocharger's performance with this kit, presenting an impressive 30% increase in the compressor wheel size within the stock turbocharger housing. Experience a significant power boost by elevating pressure at high RPMs while maintaining efficient operation. The enhanced thrust system ensures prolonged turbocharger life, and for optimized performance, consider pairing it with Stage 4 Dinan software to manage the additional boost.

Key Features:

Increases compressor size by 30%
Boosts power through increased boost pressure
Upgraded thrust system for turbocharger longevity
DINANTRONICS Stage 4 software recommended for optimal engine performance
Earns 2 points towards your Dinan badge

With over 35 years of expertise, Dinan leads BMW tuning advancements, prioritizing balanced enhancements that preserve the original driving feel. Backed by a four-year, 50,000-mile warranty, Dinan parts undergo rigorous testing, ensuring reliability. Upon significant part installation, enthusiasts receive an exclusive trunk badge, signifying the transition to Dinan performance.

Show More Show Less

N54 Single Turbo Conversion Oil Fitting

Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply

T#:23880740

Part#: N54STCOCF

Back Ordered

$ 25.00 USD

Add to Wish List

Qty

$ 25.00 USD

Add to Wish List

Planning a single turbo swap on your N54? To utilize a single turbo oil feed hose, you'll need an adapter that has threads. Fortunately, Burger Motorsports produces this high-quality CNC billet aluminum piece to provide seamless integration with the factory feed location.

Show More Show Less

Boost Hose - E90 335D

Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply

T#:384539

Part#: FMBH335D

Ships on Nov 18, 2026

Sale - Save 10% $ 223.99

This product was last offered at the strikethrough price on
10-26-2026

$ 201.35 USD

Add to Wish List

Qty

Sale - Save 10%

$ 223.99

This product was last offered at the strikethrough price on
10-26-2026

$ 201.35 USD

Add to Wish List

Because of where the stock boost hose is located - often leaks go unnoticed. Replace your stock hose that is prone to failure with this 4ply Fluorosilicone hose that is better suited to handle the pressures, temperatures, and withstand total failure caused by oil. Couplers are CNC machined. Following instructions is necessary - if installed incorrectly, the hose will seem too short for its application.

This product fits the following BMWs:
2006-2012 E90 335d

Show More Show Less

Manual Boost Controller - Black

Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply

T#:31622619

Part#: FMBV050

In Stock

Sale - Save 10% $ 46.99

This product was last offered at the strikethrough price on
10-26-2026

$ 42.19 USD

Add to Wish List

Qty

Sale - Save 10%

$ 46.99

This product was last offered at the strikethrough price on
10-26-2026

$ 42.19 USD

Add to Wish List

Turbo & Intake Heat Shield - Gen2 B58

Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply

T#:49857413

Part#: BMSG2B58THS

Ships on Nov 13, 2026

$ 119.00 USD

Add to Wish List

Qty

$ 119.00 USD

Add to Wish List

Keep heat where it belongs and boost where it counts with a B58 Turbo & Intake Heat Shield for BMW and Toyota Supra—an OE-plus style upgrade that helps your setup stay cooler, more consistent, and happier when you’re leaning on it. BMW’s factory heat management is fine at stock-ish levels, but once you start turning the wick up, the turbo becomes a rolling space heater. That radiant heat soaks the nearby intake tract, nudging IATs up and making performance less repeatable pull after pull. This shield steps in as a dedicated barrier between the turbo and intake components, helping reduce heat soak so you can keep intake air cooler and denser when you’re driving it like you mean it. Built with a clean, factory-inspired mindset, it’s precision-formed to wrap neatly around the B58 turbo and intake area, and it mounts using factory locations for a tidy, OEM-level install. No cutting, no permanent changes, and fully reversible—just a straightforward bolt-on that looks right at home in the engine bay. Made from durable, heat-resistant materials, it’s designed to handle the heat long-term without turning into a crispy science project. Why it matters Cuts down radiant heat from the turbocharger into the intake area Helps reduce intake air temperature creep Improves consistency during repeated pulls and hard driving Adds protection for surrounding components exposed to turbo heat Features & highlights Designed for BMW B58 and Toyota Supra applications Precision-formed for OEM-level fitment Heat-resistant construction for long-term durability Bolt-on install using factory mounting points Clean, OE-plus under-hood appearance

Show More Show Less

Turbo & Intake Heat Shield - Gen1 B58

Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply

T#:49857410

Part#: BMSB58THS

Ships on Nov 13, 2026

$ 119.00 USD

Add to Wish List

Qty

$ 119.00 USD

Add to Wish List

Keep heat where it belongs and boost where it counts with a B58 Turbo & Intake Heat Shield for BMW and Toyota Supra—an OE-plus style upgrade that helps your setup stay cooler, more consistent, and happier when you’re leaning on it. BMW’s factory heat management is fine at stock-ish levels, but once you start turning the wick up, the turbo becomes a rolling space heater. That radiant heat soaks the nearby intake tract, nudging IATs up and making performance less repeatable pull after pull. This shield steps in as a dedicated barrier between the turbo and intake components, helping reduce heat soak so you can keep intake air cooler and denser when you’re driving it like you mean it. Built with a clean, factory-inspired mindset, it’s precision-formed to wrap neatly around the B58 turbo and intake area, and it mounts using factory locations for a tidy, OEM-level install. No cutting, no permanent changes, and fully reversible—just a straightforward bolt-on that looks right at home in the engine bay. Made from durable, heat-resistant materials, it’s designed to handle the heat long-term without turning into a crispy science project. Why it matters Cuts down radiant heat from the turbocharger into the intake area Helps reduce intake air temperature creep Improves consistency during repeated pulls and hard driving Adds protection for surrounding components exposed to turbo heat Features & highlights Designed for BMW B58 and Toyota Supra applications Precision-formed for OEM-level fitment Heat-resistant construction for long-term durability Bolt-on install using factory mounting points Clean, OE-plus under-hood appearance

Show More Show Less

Manual Boost Controller-Polished

Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply

T#:27638804

Part#: FMICB051 POLISH

Ships in 2 Business Days

Sale - Save 10% $ 69.99

This product was last offered at the strikethrough price on
10-26-2026

$ 62.96 USD

Add to Wish List

Qty

Sale - Save 10%

$ 69.99

This product was last offered at the strikethrough price on
10-26-2026

$ 62.96 USD

Add to Wish List

Turbosmart Boost Tee Manual Boost Controller - Blue

Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply

T#:23615502

Part#: TS-0101-1101

In Stock at Vendor

10% off MSRP $ 124.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 112.99 USD

Add to Wish List

Qty

10% off MSRP

$ 124.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 112.99 USD

Add to Wish List

Upgrade your Mini's turbocharger system with the All New Boost Tee by Turbosmart, a redesigned and more compact version of the beloved Boost Tee. With a 33% smaller and ergonomic design, it retains the beloved features like the Gate Feature for optimal boost response, anti-tamper locking, and user-friendly operation. Here are the key benefits:

Pneumatic bleed valve allowing increased boost on turbocharger systems
Suitable for internal and external wastegate systems
Achieves 100-200% boost increase over base spring pressure
Proven detent system for defined boost control
Locking mechanism for secure boost level setting
Manufactured in Australia from High-Grade Brass and Billet Aluminum
Simple, elegant, and robust solution for boost control and maximum response

This Boost Tee is a value-packed upgrade for your Turbocharged engine, ensuring reliable and precise boost control for enhanced performance.

Show More Show Less

Turbosmart BOV Block-off Cap

Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply

T#:598852

Part#: TS-0203-1103

In Stock at Vendor

10% off MSRP $ 49.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 44.99 USD

Add to Wish List

Qty

10% off MSRP

$ 49.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 44.99 USD

Add to Wish List

Forge Motorsport B58 Charge Pipes - B58 A90, G20, G29

Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply

T#:587951

Part#: FMBP5

Ships on Nov 18, 2026

Sale - Save 10% $ 376.99

This product was last offered at the strikethrough price on
10-26-2026

$ 339.23 USD

Add to Wish List

Qty

Sale - Save 10%

$ 376.99

This product was last offered at the strikethrough price on
10-26-2026

$ 339.23 USD

Add to Wish List

Eventuri Carbon Turbo Inlet Set - F95/96 G09 G05 G06 G07 LCI ...

Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply

T#:32118905

Part#: EVE-X56M-LCI-CHG

Ships in 6 Business Days

$ 695.00 USD

Add to Wish List

Qty

$ 695.00 USD

Add to Wish List

Presenting the perfect addition to our X5M, XM intake system to optimize the flow path all the way to the turbos. Our carbon inlets have a larger volume than the stock inlets by maintaining a larger diameter all the way to the turbos. The stock inlets narrow down immediately after the connection to the intake which creates a restriction especially at higher boost levels. We have alleviated this restriction and also designed the curvature to be as smooth as possible allowing the turbos to function with reduced resistance. Made from prepreg carbon fiber with CNC machined flanges, the inlets also provide an aesthetic improvement to the engine bay. Benefits of the inlets are apparent with tuned vehicles where the boost pressure is higher and therefore the flow demand form the turbos is greater. This is where the larger volume of the carbon inlets help provide that extra flow. The performance gains are produced from providing the turbos with a less resistive flow path which allows them to reach peak boost sooner in the RPM range. When comparing to the stock inlets the differences are clear to see. Where the stock tubes narrow down immediately after the connection to the intakes, our tubes maintain a larger diameter and the reduction to the stock turbos is achieved with an internal radius on the machined flanges. This allows for larger volume whilst maintaining a smooth flow path. One of the drawbacks of the oversized inlets was the more aggressive reduction in size to match the stock turbos which created some flow constraints. NOTE: Some photos show our optional F9X X5M / X6M / G09 XM / G0X M60i Intake system available separately. Each inlet inlet set consists of: Prepreg Carbon Inlet Pair CNC Machined Turbo Flanges CNC Machined Breather Valve Assembly Compatible Models: F95 X5M LCI F96 X6M LCI G09 XM LCI G05 X5 M60i LCI G06 X6 M60i LCI G07 X7 M60i LCI ** This item is not eligible for return **

Show More Show Less

E46 M3 BMW Turbo Motor Mount

Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply

T#:13463751

Part#: E36TURBOMTMNT

Ships on Nov 13, 2026

$ 169.99 USD

Add to Wish List

Qty

$ 169.99 USD

Add to Wish List

Rally Road has created the perfect turbo mount alternative for different turbo configurations. With an added 20mm+ of clearance, that extra space can be vital for a bigger turbo inlet pipe!

E36 Turbo Motor Mount

Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply

T#:13727064

Part#: E36BMWTMM

Ships on Nov 13, 2026

$ 134.99 USD

Add to Wish List

Qty

$ 134.99 USD

Add to Wish List

Rally Road has created the perfect turbo mount alternative for different turbo configurations.

Project Cars

SELECT YOUR BMW

Sub-Categories

Elevate Turbocharger Performance with Upgraded Kit

Key Features:

Select Vehicle

Purpose

Category

Brand

Price

Special Offers

Shipping

Narrow Results