Find Parts That Fit Your Vehicle

Turbos

If more boost and reliability are your goals choose from one of our BMW turbo upgrades. Our turbo upgrades range from stock turbos rebuilt with stronger internals to all-new, ground-up turbo upgrades. BMW turbos such as the N54 are capable of really impressive power numbers on stock engine internals but the factory turbos lack the precise tolerances and reliability that an upgraded unit will deliver. In other words, the stock turbos can only do so much and if big power (>400whp) is your goal a turbo upgrade must be in your plans. Our partners are leading experts in turbo technology and upgrades. Each Stage has been professionally developed and tested. Additional upgrades and tuning may be, or is, required. Contact us for more details on tuning options.

Sub-Categories

Sort By:

MAC Single Turbo Boost Solenoid - N54 N55
Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply
Burger Motorsports - Corporate Logo
T#:587715
Part#: MACSTS
In Stock
$ 51.99 USD
Free Shipping on orders $49 and up
Use this plug and play low frequency MAC solenoid if retrofitting a single turbo kit to your N54 or N55. Includes plug and play harness connector for no splicing!
BMS High Flow Silicone Turbo Inlet - BMW N55 F2X F3X F87
Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply
Burger Motorsports - Corporate Logo
T#:43109033
Part#: BMS-HFSTI-FN55
Back Ordered
$ 199.00 USD
Free Shipping on orders $49 and up
Burger's replacement heavy-duty silicone turbo inlet replaces the narrow and crack-prone factory plastic unit with a higher flowing silicone inlet with billet aluminum fittings. Unlike other inlets, this inlet retains a larger flow straight from intake to turbo for improved boost response and increased turbo efficiency. While beneficial with the factory turbo, this inlet is a must-have with any larger than factory turbo and the perfect complement to the BMS N55 intake systems.
Show More Show Less
Coolant Port Block Off Plugs for N54 Single Turbo Conversion ...
Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply
Burger Motorsports - Corporate Logo
T#:23880741
Part#: N54STCCPBO
In Stock
$ 30.00 USD
Free Shipping on orders $49 and up
$ 30.00 USD
Free Shipping on orders $49 and up
If you're installing a single turbo kit on your N54-powered BMW, you'll need to block off the two coolant ports on the exhaust side of the engine block. This kit contains high-quality billet aluminum plugs for both the front and rear location factory coolant feed locations.
Show More Show Less

Burger Motorsports Blow Off Valve Adapter - Gen3 B58
Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply
Burger Motorsports - Corporate Logo
T#:38655170
Part#: BMS-BOVA-G3B58
In Stock
$ 99.00 USD
Free Shipping on orders $49 and up
$ 99.00 USD
Free Shipping on orders $49 and up
The Burger Motorsports Blow-Off Valve (BOV) Adapter for Gen3 BMW B58TU2 installs between the OE bypass solenoid and the vehicle, venting unused charge air to the atmosphere for the iconic "Pshhhh" turbo sound that enthusiasts love.
Show More Show Less

Gen 2 Turbo Heat Shield Replacement Hardware Kit | New Style Heat Shi...
Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply
M7 Speed - Corporate Logo
T#:36303307
Part#: 90-1077
Ships in 2 Business Days
Sale - Save 7% $ 30.99

This product was last offered at the strikethrough price on
08-31-2026

$ 28.83 USD
Free Shipping on orders $49 and up
Sale - Save 7%
$ 30.99

This product was last offered at the strikethrough price on
08-31-2026

$ 28.83 USD
Free Shipping on orders $49 and up
N55 (3.0T) 535i/640i Lower Intercooler Charge Pipe
Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply
Evolution Racewerks - Corporate Logo
T#:26038601
Part#: BM-ICP009LIC
Ships in 9 Business Days
$ 224.99 USD
Free Shipping on orders $49 and up

N55 Big Turbo Upgrade - F2X / F3X / F87 M2
Call In Or Chat For Best Price! 10X Entries Into Our F80 M3 Sweepstakes Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply
CARB certified for sale in all 50 states
Dinan - Corporate Logo
T#:15544960
Part#: D310-0110A
EO#: D-176-52
Back Ordered
Sale - Save 14% $ 1,980.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 1,709.96 USD
Free Shipping on orders $49 and up
Sale - Save 14%
$ 1,980.99

This product was last offered at the strikethrough price on
06-24-2026

$ 1,709.96 USD
Free Shipping on orders $49 and up

Elevate Turbocharger Performance with Upgraded Kit

Upgrade your turbocharger's performance with this kit, presenting an impressive 30% increase in the compressor wheel size within the stock turbocharger housing. Experience a significant power boost by elevating pressure at high RPMs while maintaining efficient operation. The enhanced thrust system ensures prolonged turbocharger life, and for optimized performance, consider pairing it with Stage 4 Dinan software to manage the additional boost.

Key Features:

  • Increases compressor size by 30%
  • Boosts power through increased boost pressure
  • Upgraded thrust system for turbocharger longevity
  • DINANTRONICS Stage 4 software recommended for optimal engine performance
  • Earns 2 points towards your Dinan badge

With over 35 years of expertise, Dinan leads BMW tuning advancements, prioritizing balanced enhancements that preserve the original driving feel. Backed by a four-year, 50,000-mile warranty, Dinan parts undergo rigorous testing, ensuring reliability. Upon significant part installation, enthusiasts receive an exclusive trunk badge, signifying the transition to Dinan performance.

Show More Show Less
N54 Single Turbo Conversion Oil Fitting
Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply
Burger Motorsports - Corporate Logo
T#:23880740
Part#: N54STCOCF
Back Ordered
$ 25.00 USD
Free Shipping on orders $49 and up
$ 25.00 USD
Free Shipping on orders $49 and up
Planning a single turbo swap on your N54? To utilize a single turbo oil feed hose, you'll need an adapter that has threads. Fortunately, Burger Motorsports produces this high-quality CNC billet aluminum piece to provide seamless integration with the factory feed location.
Show More Show Less

Turbo & Intake Heat Shield - Gen1 B58
Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply
Burger Motorsports - Corporate Logo
T#:49857410
Part#: BMSB58THS
Ships on Nov 11, 2026
$ 119.00 USD
Free Shipping on orders $49 and up
Keep heat where it belongs and boost where it counts with a B58 Turbo & Intake Heat Shield for BMW and Toyota Supra—an OE-plus style upgrade that helps your setup stay cooler, more consistent, and happier when you’re leaning on it. BMW’s factory heat management is fine at stock-ish levels, but once you start turning the wick up, the turbo becomes a rolling space heater. That radiant heat soaks the nearby intake tract, nudging IATs up and making performance less repeatable pull after pull. This shield steps in as a dedicated barrier between the turbo and intake components, helping reduce heat soak so you can keep intake air cooler and denser when you’re driving it like you mean it. Built with a clean, factory-inspired mindset, it’s precision-formed to wrap neatly around the B58 turbo and intake area, and it mounts using factory locations for a tidy, OEM-level install. No cutting, no permanent changes, and fully reversible—just a straightforward bolt-on that looks right at home in the engine bay. Made from durable, heat-resistant materials, it’s designed to handle the heat long-term without turning into a crispy science project. Why it matters Cuts down radiant heat from the turbocharger into the intake area Helps reduce intake air temperature creep Improves consistency during repeated pulls and hard driving Adds protection for surrounding components exposed to turbo heat Features & highlights Designed for BMW B58 and Toyota Supra applications Precision-formed for OEM-level fitment Heat-resistant construction for long-term durability Bolt-on install using factory mounting points Clean, OE-plus under-hood appearance
Show More Show Less

Turbo & Intake Heat Shield - Gen2 B58
Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply
Burger Motorsports - Corporate Logo
T#:49857413
Part#: BMSG2B58THS
Ships on Nov 11, 2026
$ 119.00 USD
Free Shipping on orders $49 and up
Keep heat where it belongs and boost where it counts with a B58 Turbo & Intake Heat Shield for BMW and Toyota Supra—an OE-plus style upgrade that helps your setup stay cooler, more consistent, and happier when you’re leaning on it. BMW’s factory heat management is fine at stock-ish levels, but once you start turning the wick up, the turbo becomes a rolling space heater. That radiant heat soaks the nearby intake tract, nudging IATs up and making performance less repeatable pull after pull. This shield steps in as a dedicated barrier between the turbo and intake components, helping reduce heat soak so you can keep intake air cooler and denser when you’re driving it like you mean it. Built with a clean, factory-inspired mindset, it’s precision-formed to wrap neatly around the B58 turbo and intake area, and it mounts using factory locations for a tidy, OEM-level install. No cutting, no permanent changes, and fully reversible—just a straightforward bolt-on that looks right at home in the engine bay. Made from durable, heat-resistant materials, it’s designed to handle the heat long-term without turning into a crispy science project. Why it matters Cuts down radiant heat from the turbocharger into the intake area Helps reduce intake air temperature creep Improves consistency during repeated pulls and hard driving Adds protection for surrounding components exposed to turbo heat Features & highlights Designed for BMW B58 and Toyota Supra applications Precision-formed for OEM-level fitment Heat-resistant construction for long-term durability Bolt-on install using factory mounting points Clean, OE-plus under-hood appearance
Show More Show Less
Turbocharger - New B46D
Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply
Garrett - Corporate Logo
T#:33047062
Part#: 11658629966
Ships in 2 Business Days
$ 1,998.99 USD
Free Shipping on orders $49 and up
Garrett Turbocharger W/ Exhaust Manifold - BMW G01/02 G20/22/23/26 G3...
Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply
Garrett - Corporate Logo
T#:33446283
Part#: 11658662073
Ships in 2 Business Days
$ 1,599.99 USD
Free Shipping on orders $49 and up
Replace your faulty turbo with a brand new Garrett turbocharger, engineered for optimal performance and reliability. Designed to meet or exceed OEM specifications, this turbocharger enhances engine efficiency, delivering improved power and torque across the RPM range when compared to your stock, worn-out turbo. Crafted with precision, it features a robust aluminum housing and a high-strength turbine wheel for superior durability and heat resistance. The advanced aerodynamics maximize airflow, ensuring quick spool-up and a responsive driving experience. Ideal for both daily drivers and performance enthusiasts, this turbocharger is a direct fit, making installation straightforward and hassle-free.
Show More Show Less


Garrett GTX3584RS Turbocharger - 856804-5003S
Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply
Garrett - Corporate Logo
T#:23383289
Part#: 856804-5003S
In Stock
$ 2,881.99 USD
Free Shipping on orders $49 and up

Unleash the power of your engine with the Garrett® GTX3584RS turbocharger, designed for 2.0L – 5.5L engines and capable of generating 550-1000 horsepower. This mid-frame turbocharger is a game-changer for enthusiasts, offering an array of cutting-edge features.

Benefits:

  • High horsepower turbine wheel for enhanced exhaust gas flow
  • Improved aerodynamic efficiency compared to other designs
  • Hi-flowing stainless steel turbine housings reducing backpressure
  • Unique compact turbine housings tailored for GTX3584RS
  • Ten-blade GTX Gen II compressor wheel for increased air mass flow
  • Larger compressor housing for efficient air circulation
  • 8mm dual ceramic ball bearing cartridge for optimal turbo response and reliability

Garrett® GTX Series Turbochargers are crafted for performance-driven enthusiasts seeking top-tier power. With next-gen aerodynamics in forged billet aluminum compressor wheels, these turbochargers offer an extended horsepower range and heightened boost response.

Show More Show Less
Garrett GTX3071R Turbocharger - .83 A/R
Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply
Garrett - Corporate Logo
T#:22723725
Part#: GRT-TBO-779
Ships in 7 Business Days
$ 2,479.99 USD
Free Shipping on orders $49 and up

Experience the power of the Garrett GEN2 GTX3071R dual ball bearing turbocharger, equipped with the Ni-Resist T3 Divided (Twin-scroll) Inlet and a 3-inch "GT" V-Band Conical Outlet featuring an 81mm centering ring. This high-performance turbocharger is designed with a .61 A/R Turbine Housing (ATP-HSG-212) and boasts an advanced GEN2 billet compressor wheel capable of delivering an astonishing 650HP.

Key Features:

  • Cutting-edge aerodynamics and ultra-high flow Garrett GTX GEN2 compressor wheel
  • Forged billet aluminum compressor wheel
  • Dual ball bearing CHRA (Center Housing and Rotating Assembly) for enhanced performance and durability

Specifications:

  • Compressor Wheel Inducer: 54mm
  • Compressor Wheel Exducer: 71mm
  • Compressor Wheel Trim: 58
  • Compressor Housing A/R: 0.60
  • Turbine Wheel Inducer: 60mm
  • Turbine Wheel Exducer: 55mm
  • Turbine Wheel Trim: 84
Show More Show Less
Turbocharger - New JCW
Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply
Garrett - Corporate Logo
T#:20518604
Part#: 11658662074
Back Ordered
$ 1,858.99 USD
Free Shipping on orders $49 and up

Turbocharger - Priced Each
Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply
For cylinders 1-4
Garrett - Corporate Logo
T#:22525975
Part#: 11657848113
Back Ordered
$ 1,806.99 USD
Free Shipping on orders $49 and up
$ 1,806.99 USD
Free Shipping on orders $49 and up
There’s a Garrett turbo for just about every size of diesel or gasoline light vehicle engine – from 0.6-liter power units to 6.7 liters and everything in between. For heavy vehicles and off-highway equipment, Garrett’s product range meets the needs of engines with power ratings from 60hp to a mighty 4000hp. Garrett technologies and innovations have been used by nearly every major global automaker, resulting in approximately 100 million vehicles using Garrett products and an average launch rate of 100 new applications annually spanning gas, diesel, natural gas, electric and fuel cell powertrains. Signs of a failing turbo include unusual oil consumption, smoking, increased turbo lag, failure to hold boost, or the vehicle going into "limp mode". To restore the performance of your BMW, be sure to replace any failing turbocharger.
Show More Show Less

Turbocharger - Priced Each - BMW F01/02 F06 Alpina N63 4.4L
Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply
Garrett - Corporate Logo
T#:33446281
Part#: 11657630744
Back Ordered
$ 1,668.99 USD
Free Shipping on orders $49 and up
Replace your faulty turbo with a brand new Garrett turbocharger, engineered for optimal performance and reliability. Designed to meet or exceed OEM specifications, this turbocharger enhances engine efficiency, delivering improved power and torque across the RPM range when compared to your stock, worn-out turbo. Crafted with precision, it features a robust aluminum housing and a high-strength turbine wheel for superior durability and heat resistance. The advanced aerodynamics maximize airflow, ensuring quick spool-up and a responsive driving experience. Ideal for both daily drivers and performance enthusiasts, this turbocharger is a direct fit, making installation straightforward and hassle-free.
Show More Show Less