If you are concerned about strut tower mushrooming and looking for improved handling, the M7 Strut Tower Brace (STB) is the solution. This is the ONLY strut tower brace on the market that features anti-mushrooming technology.

Repeatedly, we've heard the same complaint: strut towers mushroom after heavy impacts from shocks and low aspect ratio tires. Initially, the shock towers take on a barely visible convex shape, but if compared to the original sheet metal, you'll find the horizontal plane has moved as much as 3/8" upwards, making alignment nearly impossible.

This issue often shows up as a slight pull to the left or right, depending on which strut tower is affected. The M7 Strut Tower Brace's end mounting plates solve this problem by sandwiching the sheet metal and shock top plate, creating a reinforced surface that won't bend, even during hard impacts.

The M7 STB features 1/2" (13mm) thick end plates that add extra strength to the strut towers, preventing mushrooming and potentially costly repairs. The cross brace significantly improves handling by adding torsional stiffness to the front body structure, helping keep your tires planted and pointed in the direction you want to go, especially during hard turns. Machined from billet aluminum and matte black powder coated, the M7 Strut Tower Brace boasts a durable black finish that looks great and won't chip or oxidize.

We have customers who won't drive their new MINI off the lot without one and dealers that sell every new MINI with either the M7 Strut Reinforcement Plates or the M7 Strut Tower Brace.

Concerned about clearance? No worries. The M7 STB profile is designed to clear both stock and aftermarket cold air intakes and ECUs. Its modular design allows easy access to the oil filter or any other accessories that might normally be blocked and require removal of the entire brace.

Installation is a snap (often taking less than 20 minutes)! No need for new nuts—the brace uses the three stock nuts on each side. Installation instructions are available online by clicking the "INSTALLATION" link on this page.

The M7 Strut Reinforcement Plates and the M7 Strut Tower Brace are two separate products that address strut tower mushrooming (you only need one or the other).

If your MINI is mainly a daily driver, the M7 Strut Reinforcement Plates are sufficient. If you have performance driving in mind, the M7 Strut Tower Brace is what you're looking for!

Please note:

• You cannot buy the SRPs and attach the cross-bar at a later time.
• The brace does not directly fit on the R50 and R52 Non-"S" Cooper due to limited hood clearance of the non-supercharged cars. It will fit but may push up on the hood slightly, requiring molding or cutting of the hood insulation after installation.
• Trimming of the underhood insulation material may be required to fully clear this brace. This is a very tight space.

A strut tower brace adds additional reinforcement to the front strut towers, tying them together for extra rigidity. This makes the whole structure stronger with less chassis flex. Handling and steering feel are improved with better turn-in and input with no downsides. 

The IRP adjustable strut brace bar is a high quality brace that is constructed of 100% steel for guaranteed reinforcement and prevention of flex. The brace bar is painted black to ensure corrosion protection.

Easily installed with basic hand tools.

*Does not fit convertible chassis"

Fits the following BMW chassis:
E36 BMW All Submodels

A strut tower brace adds additional reinforcement to the front strut towers, tying them together for extra rigidity. This makes the whole structure stronger with less chassis flex. Handling and steering feel are improved with better turn-in and input with no downsides. 

The IRP adjustable strut brace bar is a high quality brace that is constructed of 100% steel for guaranteed reinforcement and prevention of flex. The brace bar is painted black to ensure corrosion protection and to add to the looks of the engine bay.

Easily installed with basic hand tools.

Fits the following BMW chassis:
E34 BMW All Submodels

A strut tower brace adds additional reinforcement to the front strut towers, tying them together for extra rigidity. This makes the whole structure stronger with less chassis flex. Handling and steering feel are improved with better turn-in and input with no downsides. 

The IRP adjustable strut brace bar is a high quality brace that is constructed of 100% steel for guaranteed reinforcement and prevention of flex. The brace bar is painted black to ensure corrosion protection.

Easily installed with basic hand tools.

*Does not fit convertible chassis"

Fits the following BMW chassis:
E30 BMW All Submodels

Improve Your MINI's Grip with the M7 Rear Chassis Brace!

Enhance your MINI's handling by stiffening its chassis with the newly redesigned M7 Rear Chassis Brace. This upgrade is crucial for maximizing tire grip, allowing your suspension components—such as springs, shocks, and sway bars—to function optimally and keep your tires in better contact with the ground, resulting in improved grip.

• Enhanced Handling: Achieve better handling performance on both the street and the track by adding the M7 Rear Chassis Brace to your MINI's chassis.
• Triangulated Design: The fully triangulated design ensures maximum stiffness and stability, providing enhanced control during cornering and maneuvering.
• Lightweight Construction: Crafted from lightweight materials used in race car construction, the M7 Rear Chassis Brace adds rigidity without compromising your MINI's agility.
• Easy Installation: Designed for hassle-free installation, this brace can be easily mounted to your MINI's chassis with basic hand tools, allowing you to hit the road or track in no time.

Upgrade your MINI's chassis with the M7 Rear Chassis Brace and experience a significant improvement in grip and handling.

M7 Tuning J-Brace for R56 MINI Coopers

Elevate your Mini's performance with the M7 Tuning J-Brace, specially designed for R56 MINI Coopers equipped with the factory John Cooper Works intake. This brace enhances front-end stiffness, protects strut towers from mushrooming, and adds a stylish touch to your vehicle.

• Improves handling and stability
• Protects strut towers from damage
• Enhances the aesthetic appeal of your Mini
• Easy installation process
• Made from high-strength 6061-T6 aluminum alloy for durability

Note: The J-Brace has been slightly modified for the 2011-2013 model year MINI Cooper S for better clearance to stock parts. This brace does not fit the base model Cooper (non 'S' model) or the JCW GP2 model.

Experience heightened MINI Cooper performance with the M7 Tuning Stage III Bundle, combining three cutting-edge suspension components to optimize your vehicle's capabilities. This package includes the M7 Strut Tower Brace Kit, the exclusive Under Strut System (USS), and the M7 Rear Chassis Brace, meticulously designed for MINI Cooper models.

Benefits:

• Significant cost savings, saving $249 compared to individual purchases
• Enhanced chassis stiffness for improved handling and grip
• Reduced body roll during aggressive driving and emergency maneuvers
• Easy installation with proven performance
• Increased steering response and grip, minimizing understeer