Rear Diffuser

Upgrade the exterior styling on your G80/G82 with our In-House designed and engineered ABS Rear Diffuser. Utilizing factory mounting locations and supplied hardware this diffuser is a direct bolt-on upgrade that can be installed directly in place of your factory diffuser. Featuring a deep profile, an aggressive fin design, and extending the entire width of the rear bumper, our exclusive design is sure to turn heads! Our engineers did an absolutely amazing job on this diffuser from the styling to the fit and finish that is guaranteed to stand out in the market.

Pay close attention to the design characteristics of the diffuser. The emphasized outline of the diffuser adds a whole new dimension to the rear bumper bringing out the beautiful body lines of the G80. By adding an aggressive fin design and boxing around the exhaust exits the rear/side view is almost transformed into a whole new sub model that BMW forgot to offer.

Features & Specifications:

Designed to accentuate the G80/G82 body lines
Perfectly houses quad 4.0" exhaust tips for upgraded and factory exhausts
Designed in-house using state of the art 3d laser scanning and CAD technology for precision fitment
Mounts to existing bumper insert mounting locations with supplied hardware
Made from lightweight, vacuum-formed ABS polymer, with UV-stabilized gloss black sheet
Mimics the lower section of the bumper with added character to amplify OEM features
Product Development:

Our Turner Motorsport Rear Diffuser was designed, engineered, tested and quality inspected by our Research and Development team. We strive for the highest level of precision and quality through leading edge product development technology including FARO laser scanning for reverse engineering and quality inspection, SolidWorks 3D CAD modelling, rapid prototyping utilizing our in-house 3D printer, and rigorous long term product testing.

Upgrade the rear styling of your BMW G87 M2 with the Turner Motorsport Carbon Fiber Rear Diffuser. Specifically engineered for the G87 platform, this carbon fiber diffuser enhances factory body lines with a more aggressive, motorsport-inspired appearance while maintaining a clean OEM+ look. Designed in-house using state-of-the-art 3D laser scanning and CAD technology, ensuring precise fitment and seamless integration with the factory rear bumper, mounting directly to existing locations with no modifications required.

Constructed from premium, hand-laid 2x2 twill weave carbon fiber and autoclave-cured epoxy resin, this lightweight BMW M2 carbon fiber diffuser delivers exceptional strength, durability, and a high-quality finish that complements both stock and modified vehicles. The design closely follows the lower contour of the OEM bumper, adding depth and visual impact while amplifying original styling cues.

Engineered to properly house quad 4.0-inch exhaust tips, this G87 M2 rear diffuser is fully compatible with both factory and aftermarket exhaust systems, ensuring a clean, functional fit and balanced rear-end appearance.

Features and Design:

BMW G87 M2 carbon fiber rear diffuser engineered for precise OEM fitment
Enhances factory body lines with an aggressive, OEM+ aesthetic
Designed to house quad 4.0" exhaust tips (compatible with stock and aftermarket exhausts)
Developed in-house using advanced 3D laser scanning and CAD modeling
Direct bolt-on installation using factory mounting locations and hardware
Constructed from hand-laid 2x2 twill weave carbon fiber
Autoclave-cured epoxy resin for strength, durability, and premium finish
Mimics and enhances the lower section of the factory rear bumper
Product Development:

Our Turner Motorsport Rear Diffuser was designed, engineered, tested and quality inspected by our Research and Development team at Turner Motorsport. We strive for the highest level of precision and quality through leading edge product development technology including FARO laser scanning for reverse engineering and quality inspection, SolidWorks 3D CAD modelling, rapid prototyping utilizing our in-house 3D printer, and rigorous long term product testing.

ECS Exclusive Proudly Offered at Turner Motorsport!

Add-on diffuser to deliver a true motorsport look to your M3. Fastened seamlessly to the bottom of the rear bumper giving a platform to show off your exhaust and complete the rear end of the E36.

The E36 M3 is an amazing looking car right out of the box but a common BMW issue is the height of the front vs rear bumpers. As far back as the E30, the front bumper is much lower than the rear bumper and the E36 M3 faces the same issue. With this problem the front bumper is always super low to the ground and the rear bumper looks in-complete. The ECS add-on diffuser is a unique option for balancing out the rear bumper with the height of the front bumper for a full and complete look.

Give your M3 that wild style that stands out from the crowd, and obtain a nice balanced look. This is just the start of a new line of Street Flow Diffusers diffusers that are a must have extension of your awesome ride. The diffusers come powder coated in a sleek satin-black finish, are a blast to install and fit seamlessly against the rear bumper for a professional looking install every time. The Street Flow diffuser attaches below your factory rear diffuser and exhaust of your choosing to fill out the rear end for a nice full and aggressive styling profile.

Lets take a trip together down a new and unique path. Over the years ECS has designed factory replacement ABS and Carbon Fiber diffusers for all different models of BMW's. For the factory replacements ECS focus was to take the oem characteristics and add a twist and really bring out a more aggressive look with a direct replacement diffuser. For their new line of diffusers, us as car enthusiasts wanted to design a set of diffusers that really pushed the envelope and stepped outside of our comfort zone. Our new line of add-on diffusers is a result of our engineering team and fellow enthusiasts spending time study the M3 chassis, modeling different designs, testing prototypes and making changes to get a final product that we are extremely excited to offer. The E36 M3 Street Flow Diffuser is the first in our line of new diffusers. Stay tuned for the E92 M3 diffusers next!

Features:

Adds an aggressive aesthetic in addition to the subtle factory rear diffuser
Lightweight and durable 10ga aluminum in satin black powder coat to blend with the factory trim color
Installation is secure and simple with ample adjustability built in for perfect fitment
Design:

10 ga 5052 aluminum construction
Black satin powder coat for long term corrosion resistance
5 piece design to simplify installation
Slotted mounting locations to allow for mounting adjustment
Laser cut ECS logo pre powder coat for a smooth finish
Hidden hardware for better aesthetic

ECS Exclusive Proudly Offered at Turner Motorsport!

Add-on diffuser to deliver a true motorsport look to your M3. Fastened seamlessly to the bottom of the rear bumper giving a platform to show off your exhaust and complete the rear end of the E46.

The E46 M3 is an amazing looking car right out of the box but a common BMW issue is the height of the front vs rear bumpers. As far back as the E30, the front bumper is much lower than the rear bumper and the E46 M3 faces the same issue. With this problem the front bumper is always super low to the ground and the rear bumper looks in-complete. The ECS add-on diffuser is a unique option for balancing out the rear bumper with the height of the front bumper for a full and complete look.

Give your M3 that wild style that stands out from the crowd, and obtain a nice balanced look. This is just the start of a new line of Street Flow Diffusers diffusers that are a must have extension of your awesome ride. The diffusers come powder coated in a sleek satin-black finish, are a blast to install and fit seamlessly against the rear bumper for a professional looking install every time. The Street Flow diffuser attaches below your factory rear diffuser and exhaust of your choosing to fill out the rear end for a nice full and aggressive styling profile.

Lets take a trip together down a new and unique path. Over the years ECS has designed factory replacement ABS and Carbon Fiber diffusers for all different models of BMW's. For the factory replacements ECS focus was to take the oem characteristics and add a twist and really bring out a more aggressive look with a direct replacement diffuser. For their new line of diffusers, us as car enthusiasts wanted to design a set of diffusers that really pushed the envelope and stepped outside of our comfort zone. Our new line of add-on diffusers is a result of our engineering team and fellow enthusiasts spending time study the M3 chassis, modeling different designs, testing prototypes and making changes to get a final product that we are extremely excited to offer. The E46 M3 Street Flow Diffuser is the first in our line of new diffusers. Stay tuned for the E36 M3 and the E92 M3 diffusers next!

Features:

Adds an aggressive aesthetic in addition to the subtle factory rear diffuser
Lightweight and durable 10ga aluminum in satin black powder coat to blend with the factory trim color
Installation is secure and simple with ample adjustability built in for perfect fitment
Design:

10 ga 5052 aluminum construction
Black satin powder coat for long term corrosion resistance
5 piece design to simplify installation
Slotted mounting locations to allow for mounting adjustment
Laser cut ECS logo pre powder coat for a smooth finish
Hidden hardware for better aesthetic

Upgrade your BMW F30's appearance with the BMW F30 M Performance Style Diffuser - Quad Exhaust. This high-quality diffuser is designed to replicate the sleek styling of the M Performance models, enhancing the look of your BMW F30. With its quad exhaust design and precise fitment, this diffuser is a perfect choice for those seeking to add a sporty touch to their vehicle.

• Replicates the sleek styling of the M Performance models
• Enhances the appearance of your BMW F30
• Quad exhaust design for a sporty look
• Precise fitment ensures easy installation

Performance Cat-Back Exhaust - E82/E88 135:

Lightweight cat-back featuring an exotic exhaust note. Designed for the perfect blend of performance and functionality!

Prepare to give your 1 series the boost it deserves. This cat-back exhaust was made to redefine the driving experience of your 135. Manufactured from premium brushed stainless steel, it is not just about reducing weight; it's about enhancing performance with unrestricted airflow. And the sound? It's a symphony of power and precision, carefully crafted for an unforgettable soundtrack. The sound experience is more than you could ask for. With the freedom of exhaust- flow and tuned exhaust note, we are very excited to get these exhausts on 135's everywhere, don't wait!

Featured on the ECS Tuning YouTube Channel!

When crafting the ECS exhaust systems, their primary focus is on achieving the perfect balance of sound and comfort. ECS's understand the desire for a thrilling exhaust note without the annoyance of highway drone or interior vibrations. The exhaust for your 135 incorporates this balance, offering a strageic blend of sportiness and practicality. Drawing from their extensive experience, particularly with N55 cars like the E9x series, they have engineered an exhaust packed with innovative features, compatible with both factory and aftermarket downpipes. Experience the perfect blend of performance and everyday usability.

There is something about a cat-back exhaust that is just so good. Being able to unbolt and replace the entire visible exhaust gives you butterflies in your stomach. A fresh new exhaust and just knowing that things are about to get rowdy. This exhaust features twin 2.5" brushed pipes with flanges that bolt directly to your factory and aftermarket down-pipes. The dual 2.5" mid-pipes make their way toward the rear axle and converge into a single 3" exhaust section. The 3" exhaust section snakes through the rear section of the car making smooth dips and curves to make its way into a light-weight 3" turbo style muffler. Don't be fooled by the 135 muffler, the size is nothing but deceiving. The turbo-style muffler features an inner design that refines the exhaust note to perfection. An extraordinary mixture of both tone and volume. Paired with the 3" muffler is your choice of 3.5" exhaust tips that give your rear diffuser a sporty look that shouts performance.

Although both N54 and N55 share identical exhaust geometry, the N55 mid-pipes do not feature secondaries. Though the N55 cat-back is compatible with N54 downpipes this is not suggested. Supposedly this N55 catback sounds absolutely glorious on an N54, even with aftermarket downpipes.

Features and Benefits:

Street/Motorsport inspiration Enhanced exhaust note Full exhaust replacement 25% lighter than stock! Stock cat-back: 56lbs ECS cat-back: 42lbs Reduction in back pressure for increased throttle response, TQ, and HP Dual 3.5" fitted exhaust tips Part Design:

In-house designed and engineered using FARO ARM laser scanning technology and SolidWorks 3D CAD modeling for precision fitment. T304 Stainless Material in a natural finish - 1.25mm wall thickness, back purged, and TIG-welded throughout Dual 2.5" Stainless Steel Mandrel Bent Tubing T304 Stainless Steel 12mm barbed exhaust hangers TIG-Welded in OE locations for precise fitment.​ Strategically placed slip joints provide the most adjustability to obtain perfect fitment Kit Contents:

Dual 2.5" mid-pipes 3" Rear exhaust section 3.0" free-flowing muffler section for better sound, and performance Clamps and Hardware for an OEM+ install Optional 3.5" ECS exhaust tips

Textured Black Rear Diffuser - E82/E88 M-Sport:

Presenting the ECS rear diffuser tailored exclusively for your 1 Series – a fusion of both aftermarket and factory styling. Rarely does one find a design that not only encapsulates every curve and contour of a vehicle but elevates its overall aesthetic with a single, impactful addition. Amongst the limited options available for the 1 Series, the engineers at ECS have risen to the challenge of providing aftermarket support for these perfectly sized vehicles.

The diffuser replaces the mundane factory M Sport diffuser with a perfectly fitting alternative, designed to enhance the rear end of the 1 Series. Using the existing factory hardware and tab mounting locations, a transformation is merely a few screws and a plastic trim tool away. During the prototype phase, an impressive fit and finish were achieved, but their commitment to excellence led them to make further refinements. With the updated design, the ECS diffuser is now polished to perfection, an indication of the craftsmanship invested in each product.

Installation is a breeze, requiring no drilling, cutting, or modifications of any kind. Simply remove the current valance, align the tabs, and effortlessly secure the diffuser in place using the factory mounting locations and hardware. Ensure a snug fit by verifying the alignment of all tabs, and with a gentle press, witness the tabs seamlessly click into position.

For those with a 1 Series, anticipate a wave of excitement as a range of exhaust options tailored to all motor variants, including the N52, N54, and N55, are unveiled.

Features and advantages:

Transformative Enhances the rear aesthetic of the 1 Series Direct fit utilizing factory clip locations and hardware Available in Textured Matte Black and Gloss Black Crafted from lightweight, vacuum-formed UV-stabilized gloss black ABS polymer Compatible with both E82 and E88 models equipped with the M-Sport Package

Revamp your BMW E36 with the exclusive Turner In-House ABS Rear Diffuser and Side Spats for M3 Rear Bumper. Engineered by Turner Motorsport's dissatisfied engineers, this upgrade guarantees a unique and bold statement for your vehicle.

Key Features & Specifications:

• Diffuser designed around E36 body lines
• In-house design using 3D laser scanning and CAD technology
• Mounts to factory locations with OE hardware
• Lightweight, vacuum-formed ABS polymer with UV-stabilized black sheet
• Mimics lower bumper & OE diffuser lines for accentuating OEM features

Turner Motorsport High Kick Trunk Spoiler - Matte Black - E36

Enhance your E36 Coupe's aesthetics with the Turner High Kick Trunk Spoiler, included for free. Developed in-house, this ABS spoiler transforms your vehicle's look, ensuring a standout appearance without breaking the bank.

Installation Steps:

1. Clean the trunk surface area
2. Remove backing from the double-sided tape
3. Line it up, and press firmly down
4. Recommended for installation in a warm environment for better adherence

Additional Features & Specifications:

• In-house design using 3D laser scanning and CAD technology
• Mimics the carbon fiber version for similar styling
• Accentuates OE body lines along the outer edge
• Utilizes 3M double-sided tape for a strong bond
• Lightweight, vacuum-formed gloss black ABS polymer with UV stabilizer

Complete transformation for your 1 series. Direct bolt on muffler delete for a rowdy sound and a new and improved aggressive diffuser to compliment the exhaust.

A full aesthetic and sound transformation that is a direct fit solution. Both the diffuser and muffler delete are a direct replacement for the factory unit that can be upgraded with hand tools, no cutting or modification necessary!

M-Sport Rear Diffuser Upgrade:

Presenting the ECS rear diffuser tailored exclusively for your 1 Series – a fusion of both aftermarket and factory styling. Rarely does one find a design that not only encapsulates every curve and contour of a vehicle but elevates its overall aesthetic with a single, impactful addition. Amongst the limited options available for the 1 Series, the engineers at ECS have risen to the challenge of providing aftermarket support for these perfectly sized vehicles.

The diffuser replaces the mundane factory M Sport diffuser with a perfectly fitting alternative, designed to enhance the rear end of the 1 Series. Using the existing factory hardware and tab mounting locations, a transformation is merely a few screws and a plastic trim tool away. During the prototype phase, an impressive fit and finish were achieved, but their commitment to excellence led them to make further refinements. With the updated design, the ECS diffuser is now polished to perfection, an indication of the craftsmanship invested in each product.

Installation is a breeze, requiring no drilling, cutting, or modifications of any kind. Simply remove the current valance, align the tabs, and effortlessly secure the diffuser in place using the factory mounting locations and hardware. Ensure a snug fit by verifying the alignment of all tabs, and with a gentle press, witness the tabs seamlessly click into position.

For those with a 1 Series, anticipate a wave of excitement as a range of exhaust options tailored to all motor variants, including the N52, N54, and N55, are unveiled.

Features and advantages:

Transformative Enhances the rear aesthetic of the 1 Series Direct fit utilizing factory clip locations and hardware Available in Textured Matte Black and Gloss Black Crafted from lightweight, vacuum-formed UV-stabilized gloss black ABS polymer Compatible with both E82 and E88 models equipped with the M-Sport Package

135 Muffler Delete:

Arguably THE BEST modification for your 135. No cutting necessary, Direct bolt-on for a complete transformation!

The combination of 135 and muffler delete surpasses all sound expectations and is suspiciously easy to install! An impressive direct-fit solution, with no cutting involved. With the new muffler delete you can transform the sound and driving experience of your 135. A simple installation that can be completed with hand tools allows you to take your car to the next level at home in your garage! At the rear of the car just below the back seats, there is a factory flange with two bolts, simply remove the two bolts and barb from the factory hanger and swap with the ECS Tuning muffler delete for a direct replacement. Its as simple as that! Check out the installation instructions for a list of tools you will need!

-- CLICK HERE FOR INSTALLATION INSTRUCTIONS --

The ECS muffler delete removes the heavy and restrictive factory exhaust muffler and replaces it with a high-flow, straight-through exhaust pipe. This adds a louder exhaust note in a simple, cost-effective way without replacing the entire exhaust system and is fully compatible with the OEM rear valance. The muffler delete creates a noticeable increase in exhaust sound and more exhilarating turbo noise, without adding significant drone at cruising speeds. As an added bonus, this muffler delete shaves off 23.0 lbs., weighing in at only 7.0 lbs compared to the OEM muffler at 30 lbs!

Features and benefits:

Enhanced exhaust tone Simple installation (with instructions!) 23lb weight savings! (Factory muffler 30 lbs, muffler delete 7 lbs!) Swivel tip adjustment capability ​ Good looking and durable 304 stainless steel construction Factory position exhaust hangers Dual staggered tip exhaust tips Installation and Support:

Installation is as easy as unbolting, placing into position, and reinstalling fasteners! Tools you might want for the job: Exhaust hanger removal pliers - T379176 Product Development:

Our muffler delete was designed, engineered, tested, and quality inspected by our Research and Development team in our Wadsworth, Ohio facility. We strive for the highest level of precision and quality through leading-edge product development technology including FARO laser scanning for reverse engineering and quality inspection, SolidWorks 3D CAD modeling, and rigorous long-term product testing.

E36 Coupe LTW Spoiler:

Experience a modern interpretation of LTW styling with our latest creation. Inspired by the classic E36 lightweight, and crafted with precision by our expert engineering team at Turner, we proudly introduce our carbon LTW spoiler, setting a new standard in the industry. Carefully crafted with a multi-piece carbon design, our spoiler is not just an accessory; it's a work of art featuring a flawless glass-like finish and perfectly matched carbon weave.

As fellow enthusiasts, we understand the importance of preserving the integrity of E36s and their components. With iconic colors like Techno Violet, Boston Green, and Estoril Blue in mind, we refuse to compromise the original trunk and paint with traditional drilling methods. Instead, our carbon LTW spoiler features an innovative fastening system that requires no modifications and preserves your car's pristine showroom finish. With precision-engineered billet clamps and high-quality 3M double-sided tape, installation is a breeze, requiring only basic hand tools. No drilling is necessary.

Research and development:

We feel it is crucial to share our journey into the design and engineering that went into developing this remarkable carbon spoiler. The development of this LTW spoiler was not a quick process; it spanned over three years. Throughout this time, we dedicated ourselves to refining, testing, and making adjustments to craft a spoiler that we're thrilled to introduce to the community.

From perfecting the form and fitment to ensuring the spoilers's stability, every aspect of this project presented significant challenges. This carbon spoiler is comprised of 5 components, the base spoiler, 70mm risers, upper spoiler, gurney flap, and most importantly the mounting brackets.

Anyone familiar with carbon fiber knows the difficulty of working with these nearly 50-inch wide pieces to achieve straightness without flex while maintaining a consistent carbon weave pattern. During the initial stages of carbon testing, the manufacturing process proved to be nothing short of impossible. Issues such as carbon fiber twisting during curing, waviness in the exterior appearance, and mismatched carbon weave posed significant hurdles.

Furthermore, ensuring precise fitment was paramount. Not only did the spoiler components need to seamlessly integrate with the trunk gaps, but they also had to clear adjacent body portions without error. We underwent rigorous testing, cycling through five sets of carbon spoiler prototypes before achieving a result that met our exact standards.

Numerous adjustments were made throughout the project, including modifications to the carbon composition, bracketry, and the incorporation of gaskets between carbon layers. Our passion and dedication were poured into every aspect of this product.

Throughout the project timeline, we conducted extensive long-term testing on various vehicles, subjecting the spoiler to speeds beyond what can be publicly disclosed. When we say these spoilers are secure, we mean it. Utilizing both 3M double-sided tape and four billet brackets with a total of eight fasteners, this spoiler can be confidently installed. The billet mounting brackets are designed to fasten over the top of the factory seam sealer on the underside of the trunk for maximum stability. Near the end of testing, we decided to add an adhesive-backed gasket to the underside of the base, providing yet another layer of paint protection.

Styling:

The greatest part we have enjoyed over this project is the versatile style of the spoiler as designed. If you have read this far into our development process we can strongly say that you are a true car enthusiast. As car enthusiasts we can never leave the car alone, changing setups and most importantly styling. With the multi-piece design, the option to change up your look is just moments away with a little help from some hand tools.

Initially, we were fully committed to running the complete setup: full height, 70mm risers, and gurney flap – all inspired by the LTW look with a modern carbon twist. However, as we spent more time with the spoiler, our perspective shifted. We decided to remove the 70mm risers and suddenly rediscovered our love for the E36's original aesthetic. Without the risers, the spoiler took on a new, understated elegance, blending seamlessly with the car's overall design.

Time passed, and we began to explore other options. Removing the gurney flap toned down the race car vibe, revealing yet another layer of the spoiler's versatility. Each subtle alteration brought about a significant change in style, proving that even the smallest adjustments could make a world of difference.

Our journey with the spoiler was one of constant evolution; from full-on LTW racing aesthetics to more understated styling and back again. This flexibility was the true beauty of our creation, keeping us engaged and dedicated throughout the rigorous development process.

E36 M3 Street Flow Rear Diffuser

Add-on diffuser to deliver a true motorsport look to your M3. Fastened seamlessly to the bottom of the rear bumper giving a platform to show off your exhaust and complete the rear end of the E36.

The E36 M3 is an amazing looking car right out of the box but a common BMW issue is the height of the front vs rear bumpers. As far back as the E30, the front bumper is much lower than the rear bumper and the E36 M3 faces the same issue. With this problem the front bumper is always super low to the ground and the rear bumper looks in-complete. The ECS add-on diffuser is a unique option for balancing out the rear bumper with the height of the front bumper for a full and complete look.

Give your M3 that wild style that stands out from the crowd, and obtain a nice balanced look. This is just the start of a new line of Street Flow Diffusers diffusers that are a must have extension of your awesome ride. The diffusers come powder coated in a sleek satin-black finish, are a blast to install and fit seamlessly against the rear bumper for a professional looking install every time. The Street Flow diffuser attaches below your factory rear diffuser and exhaust of your choosing to fill out the rear end for a nice full and aggressive styling profile.

Lets take a trip together down a new and unique path. Over the years ECS has designed factory replacement ABS and Carbon Fiber diffusers for all different models of BMW's. For the factory replacements ECS focus was to take the oem characteristics and add a twist and really bring out a more aggressive look with a direct replacement diffuser. For their new line of diffusers, us as car enthusiasts wanted to design a set of diffusers that really pushed the envelope and stepped outside of our comfort zone. Our new line of add-on diffusers is a result of our engineering team and fellow enthusiasts spending time study the M3 chassis, modeling different designs, testing prototypes and making changes to get a final product that we are extremely excited to offer. The E36 M3 Street Flow Diffuser is the first in our line of new diffusers. Stay tuned for the E92 M3 diffusers next!

Features:

Adds an aggressive aesthetic in addition to the subtle factory rear diffuser Lightweight and durable 10ga aluminum in satin black powder coat to blend with the factory trim color Installation is secure and simple with ample adjustability built in for perfect fitment Design:

10 ga 5052 aluminum construction Black satin powder coat for long term corrosion resistance 5 piece design to simplify installation Slotted mounting locations to allow for mounting adjustment Laser cut ECS logo pre powder coat for a smooth finish Hidden hardware for better aesthetic

Upgrade the rear appearance of your BMW with the BMW F30 M Performance Style diffuser - Single Exit. This high-quality diffuser enhances the sporty look of your BMW F30 while adding a touch of aggression. Engineered specifically for BMW F30 models, this diffuser offers improved aerodynamics and airflow. Elevate the style and performance of your BMW with this premium M Performance style diffuser.

• Enhances the sporty appearance of your BMW F30
• Adds aggression and style to the rear of your BMW
• Engineered specifically for BMW F30 models
• Improves aerodynamics and airflow for enhanced performance

E92 M3 Street Flow Rear Diffuser While the E92 M3 is a stunning car from the factory, the rear bumper often lacks the visual weight to match the front—especially on lowered cars. The ECS Street Flow Rear Diffuser is engineered to correct that imbalance, adding a sharp, race-ready look that enhances your M3’s profile from all angles. This add-on diffuser is custom-tailored for the E92 M3 and seamlessly complements the OEM styling with a level, ground-hugging aesthetic. With an optional center fin, you can personalize the look further, dialing up the intensity to match your vision.

Why You’ll Love It:

Bold, Aggressive Style: Enhances your car’s rear stance, filling out the bumper for a balanced, race-inspired look. Satin Black Powder Coat Finish: This durable finish integrates perfectly with OEM trim for a factory-finished appearance. Simple, Secure Installation: Our diffuser bolts on easily, providing a snug fit with hidden, color-matched hardware for a clean look. ECS Original Design: Years of engineering experience and enthusiast feedback led to a unique, uncompromising design that perfectly complements the M3. Premium Design & Materials:

Robust 10-Gauge Aluminum: Built from durable 5052 aluminum with precision laser cuts for a flawless fit and lasting durability. 5-Piece Construction: Streamlined assembly makes installation straightforward. Adjustable Fit: Slotted mounting points allow for exact positioning and alignment. Unique ECS Touches: ECS logo cutout and color-matched hardware for sleek, subtle branding.

Carbon Fiber Rear Spoiler – E92 M3 With a lightweight, eye-catching carbon weave, this spoiler gives your BMW that premium, performance-oriented finish with minimal weight addition. Installation is simple and secure with double-sided adhesive for a reliable, long-lasting hold.

Spoiler Highlights:

Direct Fit for E92 M3: Perfectly contoured to the E92 M3’s rear profile for a sleek, custom fit. No Paint Required: High-grade carbon fiber finish complements any paint color, providing that signature performance style right out of the box. Don’t miss out on this unique chance to elevate your M3’s appearance with a complete, cohesive styling package. Get your ECS Street Flow Diffuser and enjoy the added touch of a carbon fiber rear spoiler—an all-in-one exclusive offer designed to make your E92 M3 truly stand out.

Upgrade your MINI's aesthetics with the JCW Aerodynamic Package Trim in gloss black, designed to enhance your vehicle's aero package. Whether for an enhanced look or to replace worn-out parts, this trim, made from gloss black textured plastic, seamlessly matches your MINI's existing trim.

Renowned for its Japan-style full body painted appearance, Turner Motorsport offers a hassle-free solution. No more frequent applications of trim care or black treatment when it rains, thanks to this trim's durable construction.

Mimicking the factory design trim, this kit includes factory-style tabs for an easy and secure installation. The comprehensive package comprises the front spoiler set, side skirt set lower trim, and rear bumper extension set, all in gloss black, transforming your MINI's appearance.

Note: Does not include GP2 rear diffuser.

Upgrade your BMW G20 M340's exterior with the Turner In-House designed Gloss Black Rear Diffuser. Recognizing the satisfaction of G20 M340 owners with Turner's Carbon Diffuser, the engineers at Turner Motorsport created a more cost-effective OEM + version.

This in-house engineered diffuser is designed for aftermarket exhausts up to 4" in diameter, adding an aggressive appearance that complements the factory appeal of your M340. Crafted from UV-stabilized ABS polymer, the diffuser achieves a deep high gloss shine, setting your vehicle apart with an aggressive and sporty style. The dual tip/dual outlet design is compatible with aftermarket exhaust systems up to 4" in diameter.

Installation is hassle-free, requiring no drilling, cutting, or modification. Simply remove your current valance, align the tabs, and press the diffuser into place. Make a bold statement and let your BMW stand out with the Turner Gloss Black Diffuser!

• Designed and engineered in-house using 3D laser scanning and CAD technology
• Mimics lower bumper section & OE diffuser lines for enhanced OEM features
• Compatible with aftermarket exhausts up to 4.0"
• Mounts to OE clip locations and OE holes on the outer edges
• Lightweight, vacuum-formed UV-stabilized gloss black ABS polymer

Enhance your car's appearance with the G20 rear window spoiler from Turner Motorsport. Crafted from high-quality UV-stabilized polymer, this gloss black spoiler adds a sporty design with a sleek look. The straight-edged roof spoiler design, featuring a center cutout, requires no drilling, cutting, or modifications.

The spoiler matches all other gloss black components from Turner Motorsport and installs effortlessly. After aligning, remove the liner from the attached high-strength dual-sided tape and firmly press the spoiler onto the window. Make a distinctive statement and elevate your vehicle's style with Turner Motorsport's free Gloss Black Rear Window Spoiler.