Find Parts That Fit Your Vehicle

Front Bumper Upgrades

Whether you just got in a fender-bender or you weren't lucky enough to get an m-sport BMW, we support your decision to purchase a new bumper. Ditching your factory bumpers and upgrading to either ///M or m-sport bumpers will be a huge style upgrade for your BMW.
Sort By:

M-Tech 2 Sedan Replica Front Bumper Conversion
10X Entries Into Our F80 M3 Sweepstakes
Turner Motorsport - Corporate Logo
T#:348508
Part#: E46/4FTMTECH
Back Ordered
$ 484.99 USD
$ 484.99 USD
This kit includes all of the pieces to make this a complete install, so no worries about part and piecing your own kit.
Turner Motorsport - Corporate Logo
T#:338728
Part#: TMS1905
Back Ordered
Starting at $ 613.99 USD
Starting at $ 613.99 USD
This is a high quality reproduction of the Euro-only model E46 M3 CSL style front bumper cover spoiler. Unlike the stock E46 M3 style bumper, this CSL style has no fog light openings, and a single duct on the driver's side that can be made to function as a cold air intake inlet/duct. The bumper is made of polypropylene (PP) plastic, just like a factory BMW bumper covers. It also features pre-installed carbon fiber lips, very much in keeping with the factory CSL part. Best of all, this CSL-inspired bumper is available for only a fraction of what a real CSL bumper would sell for -- the BMW dealers themselves are forbidden from ordering genuine CSL parts anymore, making the "real thing" even harder to come by. This bumper comes as shown, primed ready to prep and paint. Includes US license plate mount (bumper is pre-drilled to accpet the license plate mount). The screen for the intake hole is not included but can be added from the options below. Professional paint and installation is highly recommended.

This M3 CSL style bumper can be used on the following BMWs:
1999-2005 E46 3 Series Sedan BMW 323i, 325i, 325xi, 328i, 330i, 330xi
2000-2006 E46 3 Series Coupe BMW 323Ci, 325Ci, 328Ci & 330Ci
 
Show More Show Less
E90 M3 Style Front Spoiler / Bumper Cover
10X Entries Into Our F80 M3 Sweepstakes
Turner Motorsport - Corporate Logo
T#:386700
Part#: E90M3FTBUMPPDK
Back Ordered
Starting at $ 765.99 USD
Starting at $ 765.99 USD
Get BMW M3-like styling on your 3 series sedan and wagon! This high quality replica closely resembles the E90 M3 front spoiler, and adds fog lights (included in the kit) for a fraction of what the original M3 spoiler would cost. It also includes the mesh center grill. Only available for cars  without PDC  (park distance control). Comes ready to paint and install. Professional paint and installation is always recommended. 

Because of size and dimensions of this front bumper, it can not be shipped via conventional carriers such as UPS or FedEx, and must be shipped via Truck Frieght shipping. Please call or email, and we can get you a a quote for freight. 

This M3-style front bumper / front spoiler fits the following BMWs:
E90 BMW  325i 325xi 328i 328xi 328i xDrive 330i 330xi 335d 335i 335xi 335i xDrive - Sedan
E91 BMW  325xi 328i 328xi 328i xDrive - Wagon
Not for cars with PDC
Show More Show Less

M-Sport Syle Front Bumper Conversion
10X Entries Into Our F80 M3 Sweepstakes
Turner Motorsport - Corporate Logo
T#:386707
Part#: E90MTECHFT
Back Ordered
Starting at $ 795.99 USD
Starting at $ 795.99 USD

Upgrade your stock front bumper with this M Sport front bumper cover. Aggressively designed by BMW to set your E90 apart from the rest.

Includes the following

  • Front bumper cover
  • Fog lamp grilles
  • Lower grilles
  • Tow hook cover

Does not include fender liners or air ducts. For vehicles without PDC control or auto cruise control with headlight washers

This M Sport style front bumper / front spoiler fits the following BMWs: 
E90 BMW  325i 325xi 328i 328xi 328i xDrive 330i 330xi 335d 335i 335xi 335i xDrive - Sedan 
E91 BMW  325xi 328i 328xi 328i xDrive - Wagon 

Show More Show Less

Turner Motorsport - Corporate Logo
T#:583731
Part#: TMS1MFBKT
Back Ordered
Sale - Save 10% $ 1,009.99

This product was last offered at the strikethrough price on
06-14-2026

$ 908.99 USD
Free Shipping on orders $49 and up
Sale - Save 10%
$ 1,009.99

This product was last offered at the strikethrough price on
06-14-2026

$ 908.99 USD
Free Shipping on orders $49 and up
Looking to update the look of your E82/88 1 Series? This front bumper features the 1M style that can make your BMW look much more sporty and aggressive. This bumper has been designed with air ducts in place of fog lights. Included are the factory air ducting and the needed hardware for installation.
Show More Show Less
M4 Style Front Bumper With Air Duct
10X Entries Into Our F80 M3 Sweepstakes
Turner Motorsport - Corporate Logo
T#:1762256
Part#: F32M4FT-AIR
Ships in 5 Business Days
Sale - Save 5% $ 792.99

This product was last offered at the strikethrough price on
06-14-2026

$ 753.34 USD
Sale - Save 5%
$ 792.99

This product was last offered at the strikethrough price on
06-14-2026

$ 753.34 USD
Bring authentic, motorsport inspired styling and functional track presence to your BMW F32 4 Series with this M4 Designed Front Bumper. Engineered for enthusiasts who demand aggressive aesthetic contours without compromising precise body fitment
Show More Show Less

Enthusiast Bundles - Corporate Logo
T#:25009258
Part#: 28202TMS01EBKT
In Stock
Sale - Save 38% $ 574.99

This product was last offered at the strikethrough price on
05-05-2026

$ 357.08 USD
Free Shipping on orders $49 and up
Sale - Save 38%
$ 574.99

This product was last offered at the strikethrough price on
05-05-2026

$ 357.08 USD
Free Shipping on orders $49 and up

Enhance both the aesthetics and aerodynamics of your vehicle with the E36 LTW Style Front Lip in Matte Black by Turner Motorsport. This front lip not only transforms your car's appearance but also contributes to downforce, improving overall handling at higher speeds. Crafted from durable UV-stabilized ABS in a two-piece bonded design, this front lip is a cost-effective and lightweight alternative to traditional carbon fiber options. Perfect for daily drivers and track enthusiasts alike, it provides a clean matte finish reminiscent of the original E36 trim.

Concerned about potential damage? Fear not! This front lip is positioned to endure the challenges of road debris, uneven surfaces, and speed bumps. Additionally, it's designed for compatibility with M3 front bumpers and aftermarket replicas, ensuring a precise fit. Worried about the matte finish? No problem! The lip can be prepped and painted to suit your preferences.

Key Features & Specifications:

  • LTW-inspired design for a sleek appearance
  • Vacuum-formed ABS plastic with UV-resistant construction
  • 2-Piece bonded design enhances rigidity
  • Precision fitment designed by TMS engineers using 3D laser scanning & CAD
  • Uses factory self-tapping screws for installation (Need new hardware? See ES4159683)
  • Includes pre-applied 3M double-sided adhesive for additional retention and a tight seal against the front bumper

Turner Motorsport High Kick Trunk Spoiler. This ABS High Kick Trunk Spoiler is designed and engineered in-house by Turner Motorsport, using cutting-edge 3D laser scanning and CAD technology for precision fitment. Crafted from impact and UV-resistant ABS plastic, this spoiler not only enhances the sporty style of your E36 coupe but also fits your budget without compromising on quality.

Installation:

  1. Clean the surface area of the trunk.
  2. Remove the backing from the attached high-strength double-sided tape.
  3. Line it up and press firmly down.
  4. For optimal adhesion, it's recommended to perform the installation in a warm environment.

Additional Features & Specifications:

  • Mimics the design of the carbon fiber version for similar styling
  • Accentuates OE body lines along the outer edge of the spoiler
  • Utilizes 3M double-sided tape for a strong bond to the body
  • Lightweight, vacuum-formed gloss black ABS polymer enhanced with UV stabilizer
Show More Show Less
Enthusiast Bundles - Corporate Logo
T#:25009266
Part#: 047730LA01EBKT
In Stock
Sale - Save 44% $ 659.77

This product was last offered at the strikethrough price on
05-05-2026

$ 369.99 USD
Sale - Save 44%
$ 659.77

This product was last offered at the strikethrough price on
05-05-2026

$ 369.99 USD

Enhance the allure of your E46 M3 with Turner Motorsport's Gloss Black Front Lip, meticulously crafted to complement and not overshadow the natural beauty of the car. This front lip attaches seamlessly to the bumper without modifications, offering a more complete bumper appeal and the illusion of a lower ride height. Turner's design philosophy focuses on integration, drawing inspiration from the stock bumper while setting it apart with reimagined design elements.

Designed for both track and street use, this front lip seamlessly integrates with the existing design, completing the front end and filling the open space underneath. The curvature complements the front bumper, ensuring your M3 stands out with timeless body styling.

Features & Benefits:

  • Motorsport styling
  • Enhanced lowered appearance
  • Installation hardware included
  • Crafted from UV stabilized ABS polymer
  • CAD designed in-house for precision fitment
  • Compatible with factory and Turner Motorsports skid plates

Installation:

  • Mounts to the bumper using factory hardware, self-tapping screws, plastic-specific rivnut, and center post hardware
  • Requires drilling the underside of the bumper
  • Riv-nut installation tool included

High Kick Trunk Spoiler:

Transform the look of your E46 Coupe with Turner Motorsport's ABS High Kick Trunk Spoiler, providing a sporty style without the high cost of a carbon fiber spoiler. Engineered in-house using 3D laser scanning and CAD technology, this spoiler mimics the design of the carbon fiber version for similar styling, accentuating OE body lines.

Installation is a breeze with no drilling, cutting, or permanent modifications required. The lightweight, vacuum-formed gloss black ABS polymer, enhanced with UV stabilizer, ensures durability and a strong bond to the body.

Features & Specifications:

  • Designed and engineered by Turner Motorsport
  • 3D laser scanning and CAD technology for precision fitment
  • OE body line accentuation
  • Utilizes 3M double-sided tape for a strong bond
  • Lightweight, vacuum-formed gloss black ABS polymer with UV stabilizer

Enhance your E46 Coupe's aesthetic appeal with Turner Motorsport's High Kick Trunk Spoiler and experience a distinctive, sporty transformation.

Show More Show Less

Enthusiast Bundles - Corporate Logo
T#:25009265
Part#: 28202TMS0102EBKT
In Stock
Sale - Save 37% $ 562.99

This product was last offered at the strikethrough price on
05-05-2026

$ 356.83 USD
Free Shipping on orders $49 and up
Sale - Save 37%
$ 562.99

This product was last offered at the strikethrough price on
05-05-2026

$ 356.83 USD
Free Shipping on orders $49 and up

Enhance both the aesthetics and aerodynamics of your vehicle with the E36 LTW Style Front Lip in Textured Matte Black by Turner Motorsport. This front lip not only transforms your car's appearance but also contributes to downforce, improving overall handling at higher speeds. Crafted from durable UV-stabilized ABS in a two-piece bonded design, this front lip is a cost-effective and lightweight alternative to traditional carbon fiber options. Perfect for daily drivers and track enthusiasts alike, it provides a clean matte finish reminiscent of the original E36 trim.

Concerned about potential damage? Fear not! This front lip is positioned to endure the challenges of road debris, uneven surfaces, and speed bumps. Additionally, it's designed for compatibility with M3 front bumpers and aftermarket replicas, ensuring a precise fit. Worried about the matte finish? No problem! The lip can be prepped and painted to suit your preferences.

Key Features & Specifications:

  • LTW-inspired design for a sleek appearance
  • Vacuum-formed ABS plastic with UV-resistant construction
  • 2-Piece bonded design enhances rigidity
  • Precision fitment designed by TMS engineers using 3D laser scanning & CAD
  • Uses factory self-tapping screws for installation (Need new hardware? See ES4159683)
  • Includes pre-applied 3M double-sided adhesive for additional retention and a tight seal against the front bumper

Turner Motorsport High Kick Trunk Spoiler. This ABS High Kick Trunk Spoiler is designed and engineered in-house by Turner Motorsport, using cutting-edge 3D laser scanning and CAD technology for precision fitment. Crafted from impact and UV-resistant ABS plastic, this spoiler not only enhances the sporty style of your E36 coupe but also fits your budget without compromising on quality.

Installation:

  1. Clean the surface area of the trunk.
  2. Remove the backing from the attached high-strength double-sided tape.
  3. Line it up and press firmly down.
  4. For optimal adhesion, it's recommended to perform the installation in a warm environment.

Additional Features & Specifications:

  • Mimics the design of the carbon fiber version for similar styling
  • Accentuates OE body lines along the outer edge of the spoiler
  • Utilizes 3M double-sided tape for a strong bond to the body
  • Lightweight, vacuum-formed gloss black ABS polymer enhanced with UV stabilizer
Show More Show Less