Ignition

Enhance your BMW's performance with the upgraded BAV Ignition Coil, designed to boost firepower and optimize engine efficiency. These coils boast modified core windings for a faster, more efficient burn, resulting in increased torque at lower RPMs and heightened horsepower in the upper range. While improvements depend on your engine's condition, these coils ensure noticeable enhancements in performance and potential fuel economy benefits.

Product Benefits:

Improved engine firepower and efficiency
Increased torque at lower RPMs
Enhanced horsepower in higher ranges
Potential improvement in fuel economy
Set of eight for complete BMW Cooper replacement

Enhance the aesthetics and performance of your F30 BMW equipped with the N55 engine with the Turner N55 Gloss Carbon Fiber Engine Cover. CAD-designed in-house, this engine cover is tailored specifically for F30 335i models. Crafted from hand-laid 2x2 weave carbon fiber, it's available in both gloss and matte finishes. The meticulous design pays homage to previous BMW forced induction powerplants, exposing more of the engine on the cold side. The incorporation of an OEM BMW roundel ensures OE fit and finish.

Pairing a Turner engine cover with a Turner carbon fiber intake is recommended by ECS Tuning for maintaining an impressive appearance and enhancing the sound of your N55 engine bay.

• CAD-designed for F30 BMWs with N55 engine
• Hand-laid 2x2 weave carbon fiber
• Available in gloss and matte finishes
• Homage to previous BMW forced induction powerplants
• OEM BMW roundel for OE fit and finish

Set of 6 Blue Performance Ignition Coils

Turner BMW ignition coils are engineered for performance and efficiency, addressing the key components of engine function - air, fuel, and spark. These modified ignition coils increase energy output, resulting in a faster, more efficient, and consistent burn for optimal fuel utilization. The Turner ignition coils feature a distinctive blue housing, adding both performance and aesthetic value to your engine.

Routine maintenance is crucial, and these ignition coils should be changed every 40,000 - 60,000 miles to ensure the health, performance, and efficiency of your engine. Choose Turner Ignition Coils to keep your engine running strong and healthy.

• Increased performance
• Direct fitment
• Signature Turner Blue finish

Elevate your engine bay aesthetics with the stunning gloss carbon fiber engine cover designed for F Chassis BMWs. This Turner carbon fiber engine cover is a quick and transformative upgrade, replacing the plain factory plastic cover on B58 engines. In just minutes, your engine bay's appearance can be revitalized. The cover retains the factory emblem, ensuring a seamless transfer from your original engine cover to the new carbon fiber one. As one of the initial modifications for a new car, this carbon engine cover provides an instant enhancement without the need for extensive disassembly.

Crafted from hand-laid carbon fiber material with pre-impregnated carbon fiber cloth and epoxy resin, the Turner B58 Carbon Engine cover boasts a factory-form fitment derived from a mold of the original engine cover. The gloss clear coat not only enhances its aesthetic appeal but also provides UV protection and extra durability. Explore the range of other carbon fiber pieces from Turner to further enhance your B58.

• Gloss carbon fiber engine cover for F Chassis BMWs
• Quick and transformative upgrade for B58 engines
• Retains factory emblem for a seamless transfer
• Hand-laid carbon fiber material with pre-impregnated cloth and epoxy resin
• Gloss clear coat for UV protection and durability
• Easy installation, enhancing engine bay appearance in minutes

Set of 6 Blue Performance Ignition Coils

Upgrade your engine's performance with the Turner BMW Ignition Coils designed for efficiency and power. Modified for increased energy output, these coils contribute to a faster, more efficient, and consistent burn, maximizing fuel utilization. The blue housing not only adds a signature aesthetic but also signifies enhanced performance. Routine replacement every 40,000 - 60,000 miles is essential for maintaining engine health, performance, and efficiency. Choose Turner Ignition Coils for a strong and healthy engine.

• Increased performance
• Direct fitment
• Signature Turner Blue finish

Revitalize your G Chassis B58 engine bay with the exquisite gloss carbon fiber engine cover from Turner. This carbon fiber upgrade seamlessly replaces the mundane factory plastic cover, instantly enhancing the appearance of your B58 engine. In just minutes, this Turner carbon fiber engine cover delivers a transformative aesthetic, making it one of the initial and simplest modifications for new car owners. Easily transfer the factory emblem from your original engine cover to the new carbon fiber one, marking off a key enhancement from your modification checklist.

The Turner B58 Carbon Engine cover is meticulously crafted, starting with a mold of the original engine cover to ensure optimal factory-form fitment. Constructed from hand-laid carbon fiber material with pre-impregnated carbon fiber cloth and epoxy resin, the cover is finished in a captivating gloss clear coat for UV protection and enhanced durability. Explore Turner's range of remarkable carbon fiber pieces designed to elevate your B58 engine further.

• Gloss carbon fiber engine cover for G Chassis B58 engines
• Quick and transformative upgrade for enhanced aesthetics
• Seamless transfer of the factory emblem
• Meticulously crafted for optimal factory-form fitment
• Hand-laid carbon fiber material with pre-impregnated cloth and epoxy resin
• Gloss clear coat for UV protection and extra durability
• Easy installation for an instant engine bay makeover

Set of 6 Blue Performance Ignition Coils

Elevate your engine's performance with Turner BMW Ignition Coils, designed with a focus on efficiency and power. Modified to increase energy output, these coils contribute to a faster, more efficient, and consistent burn, maximizing fuel utilization. The distinctive blue housing not only adds a signature aesthetic but also signifies enhanced performance. Routine replacement every 40,000 - 60,000 miles is crucial for maintaining engine health, performance, and efficiency. Choose Turner Ignition Coils for a robust and healthy engine.

• Increased performance
• Direct fitment
• Signature Turner Blue finish

Revamp your G Chassis S58 engine bay with the impressive Turner Carbon Engine Cover. Bid farewell to the plain factory plastic cover as this carbon fiber upgrade promises to swiftly transform your engine bay's appearance. As one of the initial and straightforward modifications for new car owners, simply remove the factory engine cover and transfer the factory "M" badge and grommets onto the new carbon fiber cover. With just minutes of installation, this Turner Carbon Engine Cover elevates the aesthetics of your S58 engine.

Crafted with precision, the Turner S58 Carbon Engine Cover begins with a mold of the original engine cover to ensure an optimal factory-form fitment. Constructed from hand-laid carbon fiber material with pre-impregnated carbon fiber cloth and epoxy resin, the cover is finished with a beautiful gloss clear coat for UV protection and enhanced durability. Explore the range of other exceptional carbon fiber pieces offered by Turner to further enhance your G80 M3 or G82 M4.

• Carbon fiber engine cover for G Chassis S58 engines
• Swift and transformative upgrade for enhanced aesthetics
• Easy transfer of the factory "M" badge and grommets
• Meticulously crafted for optimal factory-form fitment
• Hand-laid carbon fiber material with pre-impregnated cloth and epoxy resin
• Gloss clear coat for UV protection and extra durability
• Quick installation for an instant engine bay makeover

Set of 6 Blue Performance Ignition Coils

Upgrade your engine's performance with Turner BMW Ignition Coils, designed with a focus on efficiency and power. Modified to increase energy output, these coils contribute to a faster, more efficient, and consistent burn, maximizing fuel utilization. The distinctive blue housing not only adds a signature aesthetic but also signifies enhanced performance. Routine replacement every 40,000 - 60,000 miles is crucial for maintaining engine health, performance, and efficiency. Choose Turner Ignition Coils for a robust and healthy engine.

• Increased performance
• Direct fitment
• Signature Turner Blue finish

B48 Muffler Delete - F30/F31/F32/F33/F36:

Arguably THE BEST modification for your N20/B48. This muffler delete sounds too good to be a 4 cylinder! The combination of N20/B48 and muffler delete surpasses all sound expectations from a 4-cylinder! Impressive direct-fit solution. With this new muffler delete you can transform the sound and driving experience of your f chassis. A simple installation that can be completed with hand tools gives you the ability to take your car to the next level at home in your garage!

The ECS muffler delete removes the heavy and restrictive factory exhaust muffler and replaces it with a high-flow, straight-through exhaust pipe. This adds a louder exhaust note in a simple, cost-effective way without replacing the entire exhaust system and is fully compatible with the OEM rear valance. The muffler delete creates a noticeable increase in exhaust sound and more exhilarating turbo noise, without adding significant drone at cruising speeds. As an added bonus, our muffler delete shaves off 21.0 lbs., weighing in at only 7.0lbs compared to the OEM muffler at 28.0lbs!

YoutTube Sound Clips Featured HERE:

Features and benefits:

Enhanced exhaust tone Simple installation (with instructions!) 21lb weight savings! (Factory muffler 28 lbs, muffler delete 7 lbs!) Tip adjustment capability ​ Slide farther on for left and right adjustment Rotate for verticle adjustment Good looking and durable 304 stainless steel construction Heavy-duty fabricated sheet metal exhaust hangers Dual staggered tip exhaust tips (integrated) Installation and Support:

Installation is as easy as cutting, placing into position, and clamping! Tools you might want for the job: Exhaust hanger removal pliers - T379176 Exhaust pipe cutter - T385451 - CLICK HERE FOR INSTALLATION INSTRUCTIONS -

High-Performance Ignition Service Kit - Gen 1 B48/46 2.0L:

High performance ignition kit for your Gen 1 B46/48 featuring spark plugs, Turner high performance ignition coils and dielectric grease to make sure you have no issues at your next maintenance interval!

Our BMW ignition coils are designed with performance and efficiency in mind. An engine needs 3 main components to run (Air, Fuel, Spark.) Turner ignition coils are modified to increase energy output; more energy output results in a faster, more efficient and consistent burn to make sure your fuel is being utilized to its maximum potential. Our signature Turner ignition coils feature a blue housing that give your engine the performance and aesthetic your looking for.

Ignition coils should be changed every 40,000 - 60,000 miles and are an important maintenance item due to the essential role they play in your engines health, performance and efficiency. Choose Turner Ignition Coils to keep your engine running strong and healthy.

Features and Benefits:

Increased performance New spark plugs and grease Direct fitment Signature Turner Blue ignition coils

F87 M2 N55 Race-Inspired Catback Exhaust System

Ready to transform your N55-powered M2 into a track-inspired machine? The Turner Motorsport Catback Exhaust delivers a lightweight, high-flow design that enhances both power and exhaust tone. Unleash a bold, aggressive sound that matches the intensity of your M2, revealing the full sonic and performance potential of the twin-scroll turbo N55 engine.

BMW enthusiasts know the thrill of owning an M2 with the N55, but the stock exhaust system can mute its character, especially as it warms up. The Turner Catback exhaust brings this engine to life with unrestricted flow and minimized weight, making every throttle response feel sharper, and every acceleration, thrilling. Perfect for the driver who wants the raw, unfiltered power of the N55 without the cost premium of the M2 Competition model.

Engineered for Power and Flow

Turner’s engineers crafted this catback exhaust to minimize weight and maximize airflow, using a true 3.0-inch stainless steel front section and straight-through rear piping. By removing factory restrictions, they’ve created an exhaust system that significantly improves performance, reduces back pressure, and delivers a sport-tuned sound that’s equally exhilarating on the track and the road. Weighing just 28 lbs, it offers a significant 27 lb reduction over the OEM exhaust, amplifying your M2's agility and responsiveness.

Sound Optimization: The N55 comes alive with this race-inspired exhaust, delivering a fierce tone that announces your arrival. Explore sound clips on the ECS Tuning YouTube Channel. High-Quality Materials: Constructed from T304 stainless steel, this exhaust is TIG-welded for enhanced durability, while the slip joints and precision mandrel bends ensure an exact fitment. Performance-Built: The quad 4.0-inch brushed exhaust tips complete the aggressive look while helping to enhance airflow, resulting in improved horsepower and torque. Features and Benefits

Motorsports-inspired exhaust tone 27 lb weight reduction for enhanced performance Free-flow design reduces back pressure for optimal torque and power gains Quad exit tips with a striking brushed finish Straightforward bolt-on installation with OEM mounting points Kit Includes

3.0" front section, direct fit to factory downpipe Lightweight midsection for better flow and sound "Race Inspired" rear exhaust section Quad 4.0" brushed exhaust tips Necessary clamps and hardware for seamless installation Optional Exhaust Pipe Hanger Removal Pliers Turner Motorsport Performance Ignition Coils

For top-tier spark and efficiency, the Turner Performance Ignition Coils deliver! Boosting energy output, these ignition coils provide a consistent, efficient spark, maximizing fuel burn and optimizing performance. Engineered with Turner’s signature blue housing, they look as good as they perform.

Features and Benefits

Enhanced ignition performance Perfect fitment for N55 engines Signature Turner Blue finish for a distinctive engine bay upgrade

B46/B48 Center Muffler and Resonator Delete - F30/F31/F32/F33/F36:

Upgrade your F chassis with the B46/B48 3" Center Muffler and Resonator Delete for a deeper, more liberating exhaust tone. This modification offers a direct swap for the factory center exhaust section, effectively enhancing both sound and performance.

Experience a distinct shift in exhaust tone, accompanied by improved flow efficiency and the elimination of factory exhaust bottlenecks. The Turner Motorsport B46/B48 Resonator Delete replaces the cumbersome factory center muffler and resonator with lightweight, high-flow T304 stainless steel 3.0" exhaust tubing.

Not only does this upgrade deliver a more pronounced exhaust note, but it also contributes to a smoother flow path, reducing restrictions and enhancing overall performance. Plus, shedding approximately 6 lbs, this mid-pipe replacement offers a practical, cost-effective solution for those seeking an enhanced driving experience without the need to replace the entire exhaust system. Fully compatible with both the front downpipe and rear muffler, it's a seamless addition to your vehicle's setup.

Features and benefits:

Enhanced exhaust tone Simple installation (with instructions!) 6lb weight savings! (Removes center muffler and center resonator) Good looking and durable 304 stainless steel construction Heavy-duty fabricated sheet metal exhaust hangers Direct bolt-on to the factory downpipe Includes factory front clamp and rear sleeve clamp for full installation Kit Includes:

Front exhaust section Mid-pipe exhaust Section Factory downpipe exhaust clamp Rear muffler sleeve clamp Installation and Support:

Installation is as easy as cutting, placing into position, and clamping! Tools you might want for the job: Exhaust hanger removal pliers - T379176 Exhaust pipe cutter - T38545 - CLICK HERE FOR INSTALLATION INSTRUCTIONS -

High-Performance Ignition Service Kit - Gen 1 B48/46 2.0L:

High performance ignition kit for your Gen 1 B46/48 featuring spark plugs, Turner high performance ignition coils and dielectric grease to make sure you have no issues at your next maintenance interval!

Our BMW ignition coils are designed with performance and efficiency in mind. An engine needs 3 main components to run (Air, Fuel, Spark.) Turner ignition coils are modified to increase energy output; more energy output results in a faster, more efficient and consistent burn to make sure your fuel is being utilized to its maximum potential. Our signature Turner ignition coils feature a blue housing that give your engine the performance and aesthetic your looking for.

Ignition coils should be changed every 40,000 - 60,000 miles and are an important maintenance item due to the essential role they play in your engines health, performance and efficiency. Choose Turner Ignition Coils to keep your engine running strong and healthy.

Features and Benefits:

Increased performance New spark plugs and grease Direct fitment Signature Turner Blue ignition coils