Select Vehicle
BMW
Mini
Create an account to be able to build Wish Lists.
This product was last offered at the strikethrough price on
05-05-2026
This product was last offered at the strikethrough price on
05-05-2026
Add power and sound to your E36 with a performance exhaust system and free-flowing intake!
Performance Axle-Back Exhaust - E36 M3:
Finally the answer to your E36 exhaust woes! Upgrade from your old, crusty or quiet exhaust that lacks the OOMPH you want to hear when stepping on the gas. Our crew at Turner have been describing this exhaust with words like “symphony” and “hearty” with its smooth and low frequency tone. This is the kind of exhaust we stand outside and listen to as our residential test vehicle rolls out from work heading off in the distance while singing the oh so sweet straight six sound.
Our new E36 cat-back is a tribute to the E36 M3 in more ways than one. The exhaust features 90s styling exhaust tips to compliment the sharp yet rudimentary body lines. Just like the E36 our exhaust was designed to be raw, straight to the point, lightweight and timeless.
To accomplish these goals our engineers revved up their creativity and went straight to work. Adapting straight to the mid-pipes our engineers transformed the lackluster 2.0” tubing and stepped up to a true-dual 2.5” exhaust with an integrated x-pipe to smooth out the flow and fine tune the exhaust note just how we wanted. Towards the rear of the vehicle you will find a light-weight and perfectly spec’d muffler featuring fabricated sheet metal hangers, slash cut integrated tips and achieves a fine-tuned exhaust note.
We can only hope the community enjoys this exhaust as much as we at Turner enjoy it. As a part of the community, we are excited to offer this awesome exhaust for all to enjoy.
Non-M Fitment:
Although we designed this exhaust specifically for the M3 model we felt it was a shame to rob this exhaust opportunity from the Non-M E36 owners. Face it, every straight six deserves a sweet exhaust. If you or your fellow enthusiasts feel so inclined our exhaust can be fitted to all standard 6 cylinder E36s. ** For non-m E36s you will have to slightly bend the exhaust hangers to get perfect fitment in the non-m rear bumper/diffuser. **
- CLICK HERE - for a sample of just how good your S50 or S52 can sound!
Why the upgrade?
By now your E36 M3 is approaching 30 years of age and you have a few possible exhaust situations:
- One of the options is you still have the factory exhaust and it is at the end of its life, it could be covered in rust and unsightly or packed solid with soot deposits which is not helping the weight, flow or tone of your exhaust.
- A second option is that you have an aftermarket exhaust that you fitted years ago and it is seeing the same fate as the factory muffler just at an expedited rate, the muffler is no longer sounding or performing the same and needs to be swapped out.
- Another probable exhaust situation you could find yourself in is that you have an exhaust fitted on your M3 that you think sounds good and had no intentions of changing it but after seeing and hearing our exhaust you find yourself wanting a new look, sound, and sense of enjoyment from driving your E36.
Features and Benefits:
Improved flow
Increased pipe diameter
Lightweight (22lbs!)
Integrated x-pipe for improved exhaust note
Deep and refined exhaust note with increased volume
Retains factory emissions
Utilizes factory exhaust hangers
Mandrel-bent dual 2.5" 304SS pipe
Compatible with M3 and replica M3 rear bumpers
Design:
Turner In-house designed and engineered using FARO ARM laser scanning technology and SolidWorks 3D CAD modeling for precision fitment.
Durable 304 Stainless Steel
Aggressive styling with integrated, engraved, slash-cut exhaust tips
Larger diameter tubing (2.5” up from just under 2”), X-pipe design, and passthrough resonator allows for freer flowing exhaust, increased power, and a louder, more engaging driving experience
Sheet metal mounting brackets on muffler designed to utilize stock mounting locations
Fits with OEM and aftermarket Turner Motorsport ABS Diffuser
Accuseal style clamps allow adjustability in system while still creating a firm seal around each exhaust section
Installation:
- Click HERE for Installation Instructions -
Product Development:
Our Turner E36 Exhaust was designed, engineered, tested and quality inspected by our Research and Development team at Turner. Nothing but the highest level of precision and quality through leading-edge product development technology including FARO laser scanning for reverse engineering and quality inspection, SolidWorks 3D CAD modeling, rapid prototyping utilizing our in-house 3D printer and rigorous long term product testing.
Performance Carbon Intake Systems - E36 6 Cyl Models:
In 2023 our team at Turner can proudly say we are still fixated on the E36 chassis, our group of engineers and technicians own a multitude of E36 chassis including an early model vert, 95 M3 and Z3m(still counts!). To pay tribute to this chassis we spent a great deal of time to ensure we crafted THE best intake possible for the beloved chassis. We made separate kits tailored to each of the 6 cylinder variations with options for OBD1, OBD2 and vehicles equipped with automatic stability control.
Built from the throttle body forwards, our ground-up designed e36 intake offers a closed lid design that, when paired with our powder coated heat shield, keeps your intake temps cool, all while packaging neatly into the engine bay, ensuring your intake is working as efficiently as possible while looking as good as ever. Our versatile intake includes all the provisions from the intake to the throttle body inlet, making every adjustment along the way to fit with whichever 6-cylinder USDM E36 you have, fitting all ASC and non-ASC, M and Non-M, and OBD1 and OBD2 variants.
Carbon, OEM+ styling with added air induction and lower intake air temperatures. To go the extra mile this kit includes new upgraded silicone throttle body and maf inlet tubes. With the new silicone tubing you can replace your worn or damaged rubber boots to ensure your car is running the best it can be. If the features alone don't sell you take a look at the photos to see just how good your engine bay could look. All of this along with install instructions makes the Turner E36 intake the clear choice for your vehicle. With this many features, there is no competition on the market that can compare.
Features and benefits:
Increased air flow
Added air induction volume
Upgraded silicone throttle body MAF inlets
Enhanced engine bay aesthetic
Retains factory cold air inlet
Factory cruise control mounting
Individualized designs for all 6 cylinder variations
Design:
Heatshield Utilizes lightweight 5052 Aluminum construction finished in wrinkle black powder coat, mounting directly to the stock airbox locations
Clever design integrates stock intake snorkel, ensuring intake is receiving optimal flow and the coldest air
Utilizes stock mounting locations on frame rail and wheel arch
Cruise control motor mounts directly to Turner Heatshield, allowing for enclosed design while retaining near-stock location
Two silicone intake boot designs allow for the ability to retain or delete the ASC+T valve based on user preference
3.75” Conical Turner Motorsport Air Filter maximizes airflow given the space restrictions and allows the engine to breath freer
Retains Stock MAF Sensor
High-gloss carbon intake cover
Air box mounting for IAT sensor
Kit Contents:
Aluminum airbox - powder coat black
Carbon fiber intake cover
Reinforced silicone throttle body inlet
Reinforced silicone MAF coupler
Aluminum intake inlet - powder coat black
Charcoal canister spacer (obd1 specific)
Turner high flow oiled cone filter
Installation hardware
Product Devlopment:
Our Turner E36 Intake Systems are designed, engineered, tested and quality inspected by our Research and Development team at Turner. Nothing but the highest level of precision and quality through leading-edge product development technology including FARO laser scanning for reverse engineering and quality inspection, SolidWorks 3D CAD modeling, rapid prototyping utilizing our in-house 3D printer and rigorous long term product testing. Performance data metrics are collected utilizing Mustang AWD 500 SE in ground dyno and in-house Superflow SF-750 Flowbench.
Installation:
- Click HERE for Installation Instructions -
This product was last offered at the strikethrough price on
05-05-2026
This product was last offered at the strikethrough price on
05-05-2026
Turner Z3M Performance Axle-Back Exhaust
Unleash your Z3M’s full potential with the Turner Performance Axle-Back Exhaust. Forget the heavy, restrictive factory exhaust — this system not only drops a significant 42 pounds but also provides a clean, aggressive tone that announces your arrival on the road or track.
Why Choose the Turner Z3M Exhaust?
While the E36 and E46 M3 models often steal the spotlight in the BMW performance scene, the Z3M, with its coveted S52 or S54 engine, offers an exceptional blend of power and handling. The Turner Axle-Back Exhaust embraces and enhances the Z3M’s capabilities, refining its sound, power, and aesthetic appeal for true enthusiasts.
With a straight-through muffler design, this exhaust optimizes exhaust flow, boosting throttle response, torque, and horsepower. Lightweight and meticulously engineered, it’s crafted to bolt right onto the factory mid-pipes for easy installation. Precision-designed for flawless fitment, it retains the OEM exhaust angle for a clean, OEM+ look.
Pro Tip: When swapping out your exhaust, check if your gaskets and mounts need refreshing for a completely seamless install.
Replacement Part Recommendations:
Gaskets – P# 18111723379 Round Hangers – P# 18211105635 Square Hangers – P# 18211704198 Exhaust Features and Benefits:
Weight Reduction: 60% lighter than stock — a whopping 42-pound weight loss. Enhanced Sound: Free-flowing design minimizes rasp for a refined, powerful tone. Precision Fit: Designed using FARO ARM laser scanning and CAD technology. Durable Build: Made from T304 stainless steel with a natural finish, 1.25mm wall thickness, and TIG-welded for durability. Increased Power: Mandrel-bent dual 2.5" stainless steel tubing reduces back pressure, enhancing performance. Aesthetic Upgrade: Quad-tip design for an eye-catching rear view. Kit Includes: Clamps, hardware, optional Turner exhaust tips, and a full rear exhaust section. Turner Motorsport DSSR (389mm) for Z3M
Upgrade your Z3M’s shifting with Turner’s Dual Shear Selector Rod (DSSR). The DSSR provides a more solid connection, minimizing deflection and delivering a direct, precise shift feel. This meticulously crafted rod uses dual shear points to secure both ends of the shifter, translating every gear change into a crisp, controlled action — especially effective when paired with Turner’s poly rear shifter bushings.
Why Upgrade to the DSSR?
Imagine shifting with a single arm; you have control, but it’s limited. The DSSR uses both contact points, like gripping handlebars with both hands, offering a balanced and powerful connection. With its solid construction and minimized play, this DSSR keeps you firmly connected to your transmission for a completely immersive shifting experience.
DSSR Key Benefits:
Enhanced Shift Feel: Dual shear design for stability, minimizing unwanted movement. Perfect Fit: Precision-machined pins ensure seamless installation. High-Quality Materials: Constructed from 303 stainless steel for durability and corrosion resistance. Consistent Alignment: Maintains factory shifter length and angle for optimal ergonomics.
This product was last offered at the strikethrough price on
05-05-2026
This product was last offered at the strikethrough price on
05-05-2026
Add power and sound to your E36 with a performance exhaust system and free-flowing intake!
Performance Axle-Back Exhaust - E36 M3:
Finally the answer to your E36 exhaust woes! Upgrade from your old, crusty or quiet exhaust that lacks the OOMPH you want to hear when stepping on the gas. Our crew at Turner have been describing this exhaust with words like “symphony” and “hearty” with its smooth and low frequency tone. This is the kind of exhaust we stand outside and listen to as our residential test vehicle rolls out from work heading off in the distance while singing the oh so sweet straight six sound.
Our new E36 cat-back is a tribute to the E36 M3 in more ways than one. The exhaust features 90s styling exhaust tips to compliment the sharp yet rudimentary body lines. Just like the E36 our exhaust was designed to be raw, straight to the point, lightweight and timeless.
To accomplish these goals our engineers revved up their creativity and went straight to work. Adapting straight to the mid-pipes our engineers transformed the lackluster 2.0” tubing and stepped up to a true-dual 2.5” exhaust with an integrated x-pipe to smooth out the flow and fine tune the exhaust note just how we wanted. Towards the rear of the vehicle you will find a light-weight and perfectly spec’d muffler featuring fabricated sheet metal hangers, slash cut integrated tips and achieves a fine-tuned exhaust note.
We can only hope the community enjoys this exhaust as much as we at Turner enjoy it. As a part of the community, we are excited to offer this awesome exhaust for all to enjoy.
Non-M Fitment:
Although we designed this exhaust specifically for the M3 model we felt it was a shame to rob this exhaust opportunity from the Non-M E36 owners. Face it, every straight six deserves a sweet exhaust. If you or your fellow enthusiasts feel so inclined our exhaust can be fitted to all standard 6 cylinder E36s. ** For non-m E36s you will have to slightly bend the exhaust hangers to get perfect fitment in the non-m rear bumper/diffuser. **
- CLICK HERE - for a sample of just how good your S50 or S52 can sound!
Why the upgrade?
By now your E36 M3 is approaching 30 years of age and you have a few possible exhaust situations:
- One of the options is you still have the factory exhaust and it is at the end of its life, it could be covered in rust and unsightly or packed solid with soot deposits which is not helping the weight, flow or tone of your exhaust.
- A second option is that you have an aftermarket exhaust that you fitted years ago and it is seeing the same fate as the factory muffler just at an expedited rate, the muffler is no longer sounding or performing the same and needs to be swapped out.
- Another probable exhaust situation you could find yourself in is that you have an exhaust fitted on your M3 that you think sounds good and had no intentions of changing it but after seeing and hearing our exhaust you find yourself wanting a new look, sound, and sense of enjoyment from driving your E36.
Features and Benefits:
Improved flow
Increased pipe diameter
Lightweight (22lbs!)
Integrated x-pipe for improved exhaust note
Deep and refined exhaust note with increased volume
Retains factory emissions
Utilizes factory exhaust hangers
Mandrel-bent dual 2.5" 304SS pipe
Compatible with M3 and replica M3 rear bumpers
Design:
Turner In-house designed and engineered using FARO ARM laser scanning technology and SolidWorks 3D CAD modeling for precision fitment.
Durable 304 Stainless Steel
Aggressive styling with integrated, engraved, slash-cut exhaust tips
Larger diameter tubing (2.5” up from just under 2”), X-pipe design, and passthrough resonator allows for freer flowing exhaust, increased power, and a louder, more engaging driving experience
Sheet metal mounting brackets on muffler designed to utilize stock mounting locations
Fits with OEM and aftermarket Turner Motorsport ABS Diffuser
Accuseal style clamps allow adjustability in system while still creating a firm seal around each exhaust section
Installation:
- Click HERE for Installation Instructions -
Product Development:
Our Turner E36 Exhaust was designed, engineered, tested and quality inspected by our Research and Development team at Turner. Nothing but the highest level of precision and quality through leading-edge product development technology including FARO laser scanning for reverse engineering and quality inspection, SolidWorks 3D CAD modeling, rapid prototyping utilizing our in-house 3D printer and rigorous long term product testing.
Performance Carbon Intake Systems - E36 6 Cyl Models:
In 2023 our team at Turner can proudly say we are still fixated on the E36 chassis, our group of engineers and technicians own a multitude of E36 chassis including an early model vert, 95 M3 and Z3m(still counts!). To pay tribute to this chassis we spent a great deal of time to ensure we crafted THE best intake possible for the beloved chassis. We made separate kits tailored to each of the 6 cylinder variations with options for OBD1, OBD2 and vehicles equipped with automatic stability control.
Built from the throttle body forwards, our ground-up designed e36 intake offers a closed lid design that, when paired with our powder coated heat shield, keeps your intake temps cool, all while packaging neatly into the engine bay, ensuring your intake is working as efficiently as possible while looking as good as ever. Our versatile intake includes all the provisions from the intake to the throttle body inlet, making every adjustment along the way to fit with whichever 6-cylinder USDM E36 you have, fitting all ASC and non-ASC, M and Non-M, and OBD1 and OBD2 variants.
Carbon, OEM+ styling with added air induction and lower intake air temperatures. To go the extra mile this kit includes new upgraded silicone throttle body and maf inlet tubes. With the new silicone tubing you can replace your worn or damaged rubber boots to ensure your car is running the best it can be. If the features alone don't sell you take a look at the photos to see just how good your engine bay could look. All of this along with install instructions makes the Turner E36 intake the clear choice for your vehicle. With this many features, there is no competition on the market that can compare.
Features and benefits:
Increased air flow
Added air induction volume
Upgraded silicone throttle body MAF inlets
Enhanced engine bay aesthetic
Retains factory cold air inlet
Factory cruise control mounting
Individualized designs for all 6 cylinder variations
Design:
Heatshield Utilizes lightweight 5052 Aluminum construction finished in wrinkle black powder coat, mounting directly to the stock airbox locations
Clever design integrates stock intake snorkel, ensuring intake is receiving optimal flow and the coldest air
Utilizes stock mounting locations on frame rail and wheel arch
Cruise control motor mounts directly to Turner Heatshield, allowing for enclosed design while retaining near-stock location
Two silicone intake boot designs allow for the ability to retain or delete the ASC+T valve based on user preference
3.75” Conical Turner Motorsport Air Filter maximizes airflow given the space restrictions and allows the engine to breath freer
Retains Stock MAF Sensor
High-gloss carbon intake cover
Air box mounting for IAT sensor
Kit Contents:
Aluminum airbox - powder coat black
Carbon fiber intake cover
Reinforced silicone throttle body inlet
Reinforced silicone MAF coupler
Aluminum intake inlet - powder coat black
Charcoal canister spacer (obd1 specific)
Turner high flow oiled cone filter
Installation hardware
Product Devlopment:
Our Turner E36 Intake Systems are designed, engineered, tested and quality inspected by our Research and Development team at Turner. Nothing but the highest level of precision and quality through leading-edge product development technology including FARO laser scanning for reverse engineering and quality inspection, SolidWorks 3D CAD modeling, rapid prototyping utilizing our in-house 3D printer and rigorous long term product testing. Performance data metrics are collected utilizing Mustang AWD 500 SE in ground dyno and in-house Superflow SF-750 Flowbench.
Installation:
- Click HERE for Installation Instructions -
This product was last offered at the strikethrough price on
05-05-2026
This product was last offered at the strikethrough price on
05-05-2026
B48 Muffler Delete - F30/F31/F32/F33/F36:
Arguably THE BEST modification for your N20/B48. This muffler delete sounds too good to be a 4 cylinder! The combination of N20/B48 and muffler delete surpasses all sound expectations from a 4-cylinder! Impressive direct-fit solution. With this new muffler delete you can transform the sound and driving experience of your f chassis. A simple installation that can be completed with hand tools gives you the ability to take your car to the next level at home in your garage!
The ECS muffler delete removes the heavy and restrictive factory exhaust muffler and replaces it with a high-flow, straight-through exhaust pipe. This adds a louder exhaust note in a simple, cost-effective way without replacing the entire exhaust system and is fully compatible with the OEM rear valance. The muffler delete creates a noticeable increase in exhaust sound and more exhilarating turbo noise, without adding significant drone at cruising speeds. As an added bonus, our muffler delete shaves off 21.0 lbs., weighing in at only 7.0lbs compared to the OEM muffler at 28.0lbs!
YoutTube Sound Clips Featured HERE:
Features and benefits:
Enhanced exhaust tone Simple installation (with instructions!) 21lb weight savings! (Factory muffler 28 lbs, muffler delete 7 lbs!) Tip adjustment capability Slide farther on for left and right adjustment Rotate for verticle adjustment Good looking and durable 304 stainless steel construction Heavy-duty fabricated sheet metal exhaust hangers Dual staggered tip exhaust tips (integrated) Installation and Support:
Installation is as easy as cutting, placing into position, and clamping! Tools you might want for the job: Exhaust hanger removal pliers - T379176 Exhaust pipe cutter - T385451 - CLICK HERE FOR INSTALLATION INSTRUCTIONS -
High-Performance Ignition Service Kit - Gen 1 B48/46 2.0L:
High performance ignition kit for your Gen 1 B46/48 featuring spark plugs, Turner high performance ignition coils and dielectric grease to make sure you have no issues at your next maintenance interval!
Our BMW ignition coils are designed with performance and efficiency in mind. An engine needs 3 main components to run (Air, Fuel, Spark.) Turner ignition coils are modified to increase energy output; more energy output results in a faster, more efficient and consistent burn to make sure your fuel is being utilized to its maximum potential. Our signature Turner ignition coils feature a blue housing that give your engine the performance and aesthetic your looking for.
Ignition coils should be changed every 40,000 - 60,000 miles and are an important maintenance item due to the essential role they play in your engines health, performance and efficiency. Choose Turner Ignition Coils to keep your engine running strong and healthy.
Features and Benefits:
Increased performance New spark plugs and grease Direct fitment Signature Turner Blue ignition coils
This product was last offered at the strikethrough price on
05-05-2026
This product was last offered at the strikethrough price on
05-05-2026
Complete transformation for your 1 series. Direct bolt on muffler delete for a rowdy sound and a new and improved aggressive diffuser to compliment the exhaust.
A full aesthetic and sound transformation that is a direct fit solution. Both the diffuser and muffler delete are a direct replacement for the factory unit that can be upgraded with hand tools, no cutting or modification necessary!
M-Sport Rear Diffuser Upgrade:
Presenting the ECS rear diffuser tailored exclusively for your 1 Series – a fusion of both aftermarket and factory styling. Rarely does one find a design that not only encapsulates every curve and contour of a vehicle but elevates its overall aesthetic with a single, impactful addition. Amongst the limited options available for the 1 Series, the engineers at ECS have risen to the challenge of providing aftermarket support for these perfectly sized vehicles.
The diffuser replaces the mundane factory M Sport diffuser with a perfectly fitting alternative, designed to enhance the rear end of the 1 Series. Using the existing factory hardware and tab mounting locations, a transformation is merely a few screws and a plastic trim tool away. During the prototype phase, an impressive fit and finish were achieved, but their commitment to excellence led them to make further refinements. With the updated design, the ECS diffuser is now polished to perfection, an indication of the craftsmanship invested in each product.
Installation is a breeze, requiring no drilling, cutting, or modifications of any kind. Simply remove the current valance, align the tabs, and effortlessly secure the diffuser in place using the factory mounting locations and hardware. Ensure a snug fit by verifying the alignment of all tabs, and with a gentle press, witness the tabs seamlessly click into position.
For those with a 1 Series, anticipate a wave of excitement as a range of exhaust options tailored to all motor variants, including the N52, N54, and N55, are unveiled.
Features and advantages:
Transformative Enhances the rear aesthetic of the 1 Series Direct fit utilizing factory clip locations and hardware Available in Textured Matte Black and Gloss Black Crafted from lightweight, vacuum-formed UV-stabilized gloss black ABS polymer Compatible with both E82 and E88 models equipped with the M-Sport Package
135 Muffler Delete:
Arguably THE BEST modification for your 135. No cutting necessary, Direct bolt-on for a complete transformation!
The combination of 135 and muffler delete surpasses all sound expectations and is suspiciously easy to install! An impressive direct-fit solution, with no cutting involved. With the new muffler delete you can transform the sound and driving experience of your 135. A simple installation that can be completed with hand tools allows you to take your car to the next level at home in your garage! At the rear of the car just below the back seats, there is a factory flange with two bolts, simply remove the two bolts and barb from the factory hanger and swap with the ECS Tuning muffler delete for a direct replacement. Its as simple as that! Check out the installation instructions for a list of tools you will need!
-- CLICK HERE FOR INSTALLATION INSTRUCTIONS --
The ECS muffler delete removes the heavy and restrictive factory exhaust muffler and replaces it with a high-flow, straight-through exhaust pipe. This adds a louder exhaust note in a simple, cost-effective way without replacing the entire exhaust system and is fully compatible with the OEM rear valance. The muffler delete creates a noticeable increase in exhaust sound and more exhilarating turbo noise, without adding significant drone at cruising speeds. As an added bonus, this muffler delete shaves off 23.0 lbs., weighing in at only 7.0 lbs compared to the OEM muffler at 30 lbs!
Features and benefits:
Enhanced exhaust tone Simple installation (with instructions!) 23lb weight savings! (Factory muffler 30 lbs, muffler delete 7 lbs!) Swivel tip adjustment capability Good looking and durable 304 stainless steel construction Factory position exhaust hangers Dual staggered tip exhaust tips Installation and Support:
Installation is as easy as unbolting, placing into position, and reinstalling fasteners! Tools you might want for the job: Exhaust hanger removal pliers - T379176 Product Development:
Our muffler delete was designed, engineered, tested, and quality inspected by our Research and Development team in our Wadsworth, Ohio facility. We strive for the highest level of precision and quality through leading-edge product development technology including FARO laser scanning for reverse engineering and quality inspection, SolidWorks 3D CAD modeling, and rigorous long-term product testing.
This product was last offered at the strikethrough price on
05-05-2026
This product was last offered at the strikethrough price on
05-05-2026
Add power and sound to your E36 with a performance exhaust system and free-flowing intake!
Performance Axle-Back Exhaust - E36 M3:
Finally the answer to your E36 exhaust woes! Upgrade from your old, crusty or quiet exhaust that lacks the OOMPH you want to hear when stepping on the gas. Our crew at Turner have been describing this exhaust with words like “symphony” and “hearty” with its smooth and low frequency tone. This is the kind of exhaust we stand outside and listen to as our residential test vehicle rolls out from work heading off in the distance while singing the oh so sweet straight six sound.
Our new E36 cat-back is a tribute to the E36 M3 in more ways than one. The exhaust features 90s styling exhaust tips to compliment the sharp yet rudimentary body lines. Just like the E36 our exhaust was designed to be raw, straight to the point, lightweight and timeless.
To accomplish these goals our engineers revved up their creativity and went straight to work. Adapting straight to the mid-pipes our engineers transformed the lackluster 2.0” tubing and stepped up to a true-dual 2.5” exhaust with an integrated x-pipe to smooth out the flow and fine tune the exhaust note just how we wanted. Towards the rear of the vehicle you will find a light-weight and perfectly spec’d muffler featuring fabricated sheet metal hangers, slash cut integrated tips and achieves a fine-tuned exhaust note.
We can only hope the community enjoys this exhaust as much as we at Turner enjoy it. As a part of the community, we are excited to offer this awesome exhaust for all to enjoy.
Non-M Fitment:
Although we designed this exhaust specifically for the M3 model we felt it was a shame to rob this exhaust opportunity from the Non-M E36 owners. Face it, every straight six deserves a sweet exhaust. If you or your fellow enthusiasts feel so inclined our exhaust can be fitted to all standard 6 cylinder E36s. ** For non-m E36s you will have to slightly bend the exhaust hangers to get perfect fitment in the non-m rear bumper/diffuser. **
- CLICK HERE - for a sample of just how good your S50 or S52 can sound!
Why the upgrade?
By now your E36 M3 is approaching 30 years of age and you have a few possible exhaust situations:
- One of the options is you still have the factory exhaust and it is at the end of its life, it could be covered in rust and unsightly or packed solid with soot deposits which is not helping the weight, flow or tone of your exhaust.
- A second option is that you have an aftermarket exhaust that you fitted years ago and it is seeing the same fate as the factory muffler just at an expedited rate, the muffler is no longer sounding or performing the same and needs to be swapped out.
- Another probable exhaust situation you could find yourself in is that you have an exhaust fitted on your M3 that you think sounds good and had no intentions of changing it but after seeing and hearing our exhaust you find yourself wanting a new look, sound, and sense of enjoyment from driving your E36.
Features and Benefits:
Improved flow
Increased pipe diameter
Lightweight (22lbs!)
Integrated x-pipe for improved exhaust note
Deep and refined exhaust note with increased volume
Retains factory emissions
Utilizes factory exhaust hangers
Mandrel-bent dual 2.5" 304SS pipe
Compatible with M3 and replica M3 rear bumpers
Design:
Turner In-house designed and engineered using FARO ARM laser scanning technology and SolidWorks 3D CAD modeling for precision fitment.
Durable 304 Stainless Steel
Aggressive styling with integrated, engraved, slash-cut exhaust tips
Larger diameter tubing (2.5” up from just under 2”), X-pipe design, and passthrough resonator allows for freer flowing exhaust, increased power, and a louder, more engaging driving experience
Sheet metal mounting brackets on muffler designed to utilize stock mounting locations
Fits with OEM and aftermarket Turner Motorsport ABS Diffuser
Accuseal style clamps allow adjustability in system while still creating a firm seal around each exhaust section
Installation:
- Click HERE for Installation Instructions -
Product Development:
Our Turner E36 Exhaust was designed, engineered, tested and quality inspected by our Research and Development team at Turner. Nothing but the highest level of precision and quality through leading-edge product development technology including FARO laser scanning for reverse engineering and quality inspection, SolidWorks 3D CAD modeling, rapid prototyping utilizing our in-house 3D printer and rigorous long term product testing.
Performance Carbon Intake Systems - E36 6 Cyl Models:
In 2023 our team at Turner can proudly say we are still fixated on the E36 chassis, our group of engineers and technicians own a multitude of E36 chassis including an early model vert, 95 M3 and Z3m(still counts!). To pay tribute to this chassis we spent a great deal of time to ensure we crafted THE best intake possible for the beloved chassis. We made separate kits tailored to each of the 6 cylinder variations with options for OBD1, OBD2 and vehicles equipped with automatic stability control.
Built from the throttle body forwards, our ground-up designed e36 intake offers a closed lid design that, when paired with our powder coated heat shield, keeps your intake temps cool, all while packaging neatly into the engine bay, ensuring your intake is working as efficiently as possible while looking as good as ever. Our versatile intake includes all the provisions from the intake to the throttle body inlet, making every adjustment along the way to fit with whichever 6-cylinder USDM E36 you have, fitting all ASC and non-ASC, M and Non-M, and OBD1 and OBD2 variants.
Carbon, OEM+ styling with added air induction and lower intake air temperatures. To go the extra mile this kit includes new upgraded silicone throttle body and maf inlet tubes. With the new silicone tubing you can replace your worn or damaged rubber boots to ensure your car is running the best it can be. If the features alone don't sell you take a look at the photos to see just how good your engine bay could look. All of this along with install instructions makes the Turner E36 intake the clear choice for your vehicle. With this many features, there is no competition on the market that can compare.
Features and benefits:
Increased air flow
Added air induction volume
Upgraded silicone throttle body MAF inlets
Enhanced engine bay aesthetic
Retains factory cold air inlet
Factory cruise control mounting
Individualized designs for all 6 cylinder variations
Design:
Heatshield Utilizes lightweight 5052 Aluminum construction finished in wrinkle black powder coat, mounting directly to the stock airbox locations
Clever design integrates stock intake snorkel, ensuring intake is receiving optimal flow and the coldest air
Utilizes stock mounting locations on frame rail and wheel arch
Cruise control motor mounts directly to Turner Heatshield, allowing for enclosed design while retaining near-stock location
Two silicone intake boot designs allow for the ability to retain or delete the ASC+T valve based on user preference
3.75” Conical Turner Motorsport Air Filter maximizes airflow given the space restrictions and allows the engine to breath freer
Retains Stock MAF Sensor
High-gloss carbon intake cover
Air box mounting for IAT sensor
Kit Contents:
Aluminum airbox - powder coat black
Carbon fiber intake cover
Reinforced silicone throttle body inlet
Reinforced silicone MAF coupler
Aluminum intake inlet - powder coat black
Charcoal canister spacer (obd1 specific)
Turner high flow oiled cone filter
Installation hardware
Product Devlopment:
Our Turner E36 Intake Systems are designed, engineered, tested and quality inspected by our Research and Development team at Turner. Nothing but the highest level of precision and quality through leading-edge product development technology including FARO laser scanning for reverse engineering and quality inspection, SolidWorks 3D CAD modeling, rapid prototyping utilizing our in-house 3D printer and rigorous long term product testing. Performance data metrics are collected utilizing Mustang AWD 500 SE in ground dyno and in-house Superflow SF-750 Flowbench.
Installation:
- Click HERE for Installation Instructions -