Rear Control Arms

Condor Speed Shop Adjustable Rear Trailing Arm Bushing Kit - E10 E21 ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:578349

Part#: ADJRTAB

Ships in 3 Business Days

$ 209.99 USD

Add to Wish List

Qty

$ 209.99 USD

Add to Wish List

Designed specifically for those of you who prefer not to weld in toe and camber adjustment plates. If you have a lowered or track prepped BMW then you need this adjustable bushing kit. Condor's bushings feature in-car adjustability for camber and toe of up to +/- 1 degree. Their simple design allows for easy and accurate adjustment using the included stainless steel spanner wrench. Once adjusted, trailing arm bolts lock down the CNC machined center cores firmly in place. Condor's UHMW bushings and hard-coat anodized aluminum center cores will stiffen the rear trailing arms while giving you the benefit of adjustable suspension geometry.

Show More Show Less

Condor Speed Shop Rear Trailing Arm Monoball Bushings - BMW E36 E46 ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:40917450

Part#: RTAMB-E36-E46

In Stock at Vendor

$ 265.00 USD

Add to Wish List

Qty

$ 265.00 USD

Add to Wish List

Condor Speed Shop collaborated with Syncro Design Works to create these new Monoball Rear Trailing Arm Bushings designed for the track! While also at home on the street, these performance bushings are designed to handle the stresses of the track, offering a full range of articulation for optimal suspension geometry and a sealed design for maintenance-free operation and a long life. SDW's' own 410hp shop track/streetcar still has the original prototype bearing installed in 2009, with no measurable toe deflection. Condor RTAMBs are precision CNC machined and hard coat anodized to protect against corrosion, moisture, and salt spray. They come fully assembled and ready to install. NOTE: Professional installation recommended. These bushings must be pressed into the factory Rear Trailing Arms.

Show More Show Less

Fall-Line Motorsports G8X / F8X Rear Lower Control Arm Bearing Set - ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:28038181

Part#: FLM-G8X-1BLCABO

Ships in 1 Business Day

$ 329.99 USD

Add to Wish List

Qty

$ 329.99 USD

Add to Wish List

Experience championship-caliber performance with Fall-Line's Lower Control Arm Bearings, proudly Made in the USA. From years of competitive racing, Fall-Line is synonymous with producing top-tier suspension components that excel on the track. The weak link in the latest M Cars' rear camber arms is the rubber bushings, but Fall-Line's new lower control arm bearings offer a game-changing solution. This SKU replaces OEM BMW Part number: 33326792553 Key Features: Designed for all G8X and F8X M cars DMG Mori 5-Axis CNC machined for precision Full stainless bearing assembly including hats, bearings, housing, and spiral locks Sold in pairs; designed to replace the rear control/camber arm outer bearings (BMW Part Number: 33-32-6-792-553) By eliminating rubber from this critical feedback area, Fall-Line provides control over the tire's behavior and confidence behind the wheel at the limit. These bearings feature the largest FK spherical bearings on the market, ensuring strength and longevity even under competition-level loads. Stainless steel spiral locks offer 360 degrees of clamping force, securing the bearing from any potential movement. As a bonus, these spherical bearings outlast OEM rubber variants, eliminating the headache of repeated replacements over your ownership. Please note that, as with any elimination of suspension bushings, there may be a slight increase in noise, vibration, and harshness after installation. Upgrade your suspension with Fall-Line's Lower Control Arm Bearings and take your driving experience to the next level. Invest in championship-level performance with Fall-Line, the trusted name in motorsport.

Show More Show Less

Condor Speed Shop Rear Trailing Arm Bushings w/ Toe Correction - E36 ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:577566

Part#: RTAB36-OFFSET

In Stock at Vendor

$ 99.00 USD

Add to Wish List

Qty

$ 99.00 USD

Add to Wish List

Condor's Offset Rear Trailing Arm Bushings (RTABs) are perfect for the street and the track. They're designed to help correct rear toe-in and toe-out issues on lowered cars. To correct for toe-in: RTABs can be installed with the thick side inboard to help push the rear trailing arms towards the outsides of the car. To correct for toe-out when running minimal camber setup: RTABs can be installed with the thin sides inboard to help push the trailing arms inwards. The amount of total adjustment is purely dependent on how low your car is, but we've seen toe adjustment from 1/8” out on each side to 1/8” in on each side, which is a super nice range for the e36 rear end! They use UHMW in all of their suspension bushings because it is self-lubricating, meaning it requires no grease when installing, has almost zero deflection yet also absorbs some vibration. It will outlast other types of rubber or urethane bushings. They include black oxide plated steel plates for each RTAB to prevent lateral movement between the bushing material and the aluminum. Polyurethane and rubber bushings will deflect and slide, causing your rear alignment settings to change mid-corner. With these bushings, you won't have to worry about dynamic changes in your toe settings; the rear alignment stays in check during hard cornering, braking, and acceleration. This item fits the following BMWs: 1992-1998 E36 BMW 318i 318is 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3 1999-2005 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi M3 2003-2008 Z4 BMW Z4 2.5i Z4 3.0i Z4 3.0si Z4 M Roadster M Coupe Kit includes a pair of trailing arm bushings

Show More Show Less

Rear Lower Control Arm Bearing Set - Outer - E9X M3/E82 1M

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:5580972

Part#: FLM-E9X-1BLCABO

Ships in 3 Business Days

$ 329.99 USD

Add to Wish List

Qty

$ 329.99 USD

Add to Wish List

Rubber bushings found in the latest M Cars' rear camber arms are the last weak link in an otherwise rigid suspension. Fall-Line's new lower control arm bearings yield a significant improvement over the factory bushings; as motorsport parts, both strength and longevity were priorities—to do just that, Fall-Line boasts the largest FK spherical bearings on the market—by eliminating rubber from a critical feedback area of the car, you gain control over the tire’s behavior and thereby confidence behind the wheel at the limit. To adequately cope with competition-level load, Fall-Line bearings feature stainless steel spiral locks that offer 360 degrees of clamping force to secure the bearing from any potential movement.

Show More Show Less

Rear Lower Control Arm Cup Subframe Bearing Set - E9X M3/E82 1M ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:5580971

Part#: F8X-1BLCASB

Back Ordered

$ 419.99 USD

Add to Wish List

Qty

$ 419.99 USD

Add to Wish List

Rubber bushings found in the latest M Cars' rear camber arms are the last weak link in an otherwise rigid suspension. Fall-Line's new lower control arm subframe cup bearings yield a significant improvement over the factory bushings; as motorsport parts, both strength and longevity were priorities—to do just that, Fall-Line boasts the largest FK spherical bearings on the market—by eliminating rubber from a critical feedback area of the car, you gain control over the tire’s behavior and thereby confidence behind the wheel at the limit. To adequately cope with the competition-level load, Fall-Line bearings feature stainless steel spiral locks that offer 360 degrees of clamping force to secure the bearing from any potential movement.

Show More Show Less

Fall-Line Motorsports G8x / F8x M2 / M3 / M4 Rear Upper Control Arm B...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:27938412

Part#: FLM-G8X-1BRUCA

Back Ordered

$ 350.00 USD

Add to Wish List

Qty

$ 350.00 USD

Add to Wish List

MADE IN THE USA. Rubber bushings found in the G8X’s rear upper arms are the last weak link in an otherwise rigid suspension. The original BMW bushings yield to cornering forces applied to the suspension, resulting in camber and toe change that is not ideal for performance driving. Fall Line’s kit replaces the soft upper control arm bushings with spherical bearings, enabling the rear suspension arms to move smoothly through their travel and giving the rear of a car a more solid, planted feel. The reduced geometry change allows for the car to retain its desired alignment, maintaining better control over the tire’s behavior under heavy load. Designed to replace the inner bushings of the rear upper control arms; BMW Part Numbers: 33322284777, 33329504611, and 33329504612. The BMW M cars feature a subframe that is directly mounted to the chassis by BMW M, to reduce suspension compliance and improve performance and driving feel. Similarly, the Fall Line upper control arm bearings rigidly mount the suspension arms to the subframe, increasing driver feedback, reducing geometry change, and improving performance. As with any elimination of suspension bushings, more feedback does equate to more road and suspension noise. While the Fall Line rear upper control arm bearings are a substantial performance improvement, please do be prepared for increased noise, vibration, and harshness after installing the parts. Product Details: DMG Mori 5-Axis CNC machined Full stainless bearing assembly (hats, bearing, housing, spiral locks) Price is per set of 4 (2 per side); designed to replace the inner bushings of the rear upper control arms (BMW Part Numbers: 33-32-2-284-777, 33-32-9-504-611, & 33-32-9-504-612)

Show More Show Less

BMW E9X M3/E82 1M Inner Lower Tension Arm Bearing

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:5580975

Part#: FLM-E9X-1BLTABI

Ships in 3 Business Days

$ 329.99 USD

Add to Wish List

Qty

$ 329.99 USD

Add to Wish List

BMW E9X M3/E82 1M Inner Lower Tension Arm Bearing is engineered to elevate suspension performance with precision and durability. Developed by Fall-Line, known for their championship-level race cars and premium suspension components, this bearing is a significant upgrade over factory rubber bushings. Designed for motorsport applications, it incorporates FK spherical bearings for enhanced strength and longevity.

Superior Performance: Provides a notable improvement over OEM rubber bushings for enhanced control and feedback.
Durable Construction: Features the largest FK spherical bearings available, ensuring long-lasting reliability.
Enhanced Control: Eliminates rubber components to offer better control over tire behavior and increased driver confidence.
Robust Design: Equipped with stainless steel spiral locks for 360 degrees of clamping force to secure the bearing firmly.
Long-Lasting: Outperforms OEM rubber variants, reducing the need for frequent replacements.
Precision Engineering: CNC machined from high-quality materials in the USA for exact fit and superior performance.

Show More Show Less

Trailing Arm Mono Ball Conversion Kit - E36/E46 M3

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:5580954

Part#: FLM-E46-1BUNI

Ships in 3 Business Days

$ 408.00 USD

Add to Wish List

Qty

$ 408.00 USD

Add to Wish List

Fall Line’s mono ball spherical bearing conversion kit transforms the rear suspension feel of the E46 and E36 M3. The factory rubber bushing is very large, and is prone to substantial deflection under load, as the M3 is put through its paces. Deflection of the bushing can create unwanted geometry change, steering wobble under braking, and even hysteresis of the thrust arm.

Show More Show Less

Lower Tension Arm Bearing - Outer - E9X M3/E82 1M

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:5580979

Part#: FLM-E9X-1BLTABO

Ships in 3 Business Days

$ 329.99 USD

Add to Wish List

Qty

$ 329.99 USD

Add to Wish List

By eliminating rubber from a critical feedback area of the car, you gain control over the tire’s behavior and thereby confidence behind the wheel at the limit. To adequately cope with competition-level load, Fall-Line bearings feature stainless steel spiral locks that offer 360 degrees of clamping force to secure the bearing from any potential movement.

Show More Show Less

Project Cars

SELECT YOUR BMW

Condor Speed Shop Adjustable Rear Trailing Arm Bushing Kit - E10 E21 ...

Condor Speed Shop Rear Trailing Arm Monoball Bushings - BMW E36 E46 ...

Fall-Line Motorsports G8X / F8X Rear Lower Control Arm Bearing Set - ...

Condor Speed Shop Rear Trailing Arm Bushings w/ Toe Correction - E36 ...

Rear Lower Control Arm Bearing Set - Outer - E9X M3/E82 1M

Rear Lower Control Arm Cup Subframe Bearing Set - E9X M3/E82 1M ...

Fall-Line Motorsports G8x / F8x M2 / M3 / M4 Rear Upper Control Arm B...

BMW E9X M3/E82 1M Inner Lower Tension Arm Bearing

Trailing Arm Mono Ball Conversion Kit - E36/E46 M3

Lower Tension Arm Bearing - Outer - E9X M3/E82 1M

Select Vehicle

Category

Brand

Price

Shipping

Narrow Results