BMW Cooling System Parts & Accessories

Whether your S55-equipped BMW serves as a daily driver or track car, keeping temperatures cool is critical. While most enthusiasts focus on upgrading the radiator and water-to-air intercooler systems, the engine oil cooler is an overlooked yet critical component.

New for the F8X-generation M2, M3, and M4 is a low-slung, horizontally mounted oil cooler designed to harness underbody aerodynamics. By placing the cooler in a low-pressure zone, this design enhances airflow efficiency and achieves sustainable oil temperatures for stock and street-driven cars. However, the compact core is quickly overwhelmed on modified or track-driven vehicles. Its exposed mounting position also leaves it highly susceptible to impact damage, so a minor scrape or piece of road debris can mean a costly full replacement. If you’re already replacing your oil cooler, it’s the perfect time to upgrade!

Our engineering team set out to solve the shortcomings of the factory design by developing a larger, higher-capacity core that delivers measurable gains in thermal stability. With a 7% increase in core thickness over OEM, this upgraded unit enhances airflow through the cooler and helps maintain lower, more consistent oil temperatures under sustained load. Thanks to its robust bar-and-plate core, precision-formed sheet metal end tanks, and durable 5052 aluminum construction, it’s built to withstand the harsh realities of real-world performance driving.

Replaces OEM part numbers 17212284540 and 17214802333.

Features:

High-efficiency bar-and-plate core for superior heat dissipation Fully TIG-welded 5052 aluminum end tanks Retains OEM rubber mounting for vibration-isolated, factory-style fitment Black painted finish with laser-etched Turner logo Designed as a direct-fit replacement and upgrade for S55-equipped F8X vehicles Design:

7% thicker core (30mm vs 28mm) for increased thermal capacity 6.5% increase in finned area (104,000 mm² vs 97,650 mm²) for better cooling Compatible with the Turner Motorsport skid plate kit (ES#3448772, ES#3247792) for complete protection Product Development:

Our High Performance Aluminum Heat Exchanger was designed, engineered, tested, and quality inspected by our Research and Development team in our Wadsworth, Ohio, facility. We strive for the highest level of precision and quality through leading-edge product development technology, including FARO laser scanning for reverse engineering and quality inspection, SolidWorks 3D CAD modeling, rapid prototyping utilizing our in-house 3D printer, and rigorous long-term product testing.

BMWs are well-known for their problematic cooling systems, which are often a catalyst for irreversible engine damage and a hefty repair bill. The coolant expansion tank—a crucial component responsible for holding hot engine coolant under high pressure—is a common cause of cooling system issues. Unfortunately, BMW chose to manufacture the factory E46 M3 expansion tank out of plastic. After years of exposure to high coolant temperatures, ambient engine bay heat, and chemical-rich antifreeze, the plastic degrades, eventually weakening enough to fail catastrophically.

With this issue in mind, our team of BMW enthusiasts engineered the ultimate cooling system upgrade for E46 M3 owners: a heavy-duty expansion tank built to last! Crafted from durable 5052 TIG-welded aluminum, this tank resists high temperatures and pressures without degrading over time. Unlike the fragile OEM plastic tank, Turner’s design eliminates the risk of cracking, leaking, or failure. Upgrade to our Heavy Duty Aluminum Expansion Tank Kit and say goodbye to expansion tank issues for good!

To guarantee exact fitment, the upgraded tank was designed using advanced 3D CAD modeling. All bungs, nipples, and fittings are precision-machined to ensure a secure seal with factory hose ends. Unlike other aftermarket options, this tank maintains the factory coolant capacity and includes our laser-cut logo plate at the top, providing an accurate fill level. Internal baffles are incorporated to prevent fluid cavitation, eliminating air pockets in the cooling system and avoiding false coolant level warnings during spirited driving.

Engineered for high-performance builds and daily drivers alike, this expansion tank boasts a premium wrinkle black powder coat finish for a clean "OEM+" aesthetic. This tough coating not only enhances appearance but also protects against corrosion for long-term durability. The kit includes a silicone overflow hose, a high-quality level sensor, and an OE expansion tank cap, offering a complete cooling system upgrade. Avoid the risks of the factory expansion tank—upgrade your E46 M3 today and drive with confidence!

Features & Benefits:

Durable 5052 TIG-Welded Aluminum Construction: Ensures long-term reliability and eliminates expansion tank failure. Premium Wrinkle Black Powder Coat Finish: Offers an "OEM+" appearance while preventing corrosion. Factory Coolant Capacity Retention: Maintains the same coolant level as the original design. Laser-Cut Turner Logo Plate: Provides a clear and accurate fill level indicator. Internal Baffles: Prevent the introduction of air pockets during high-performance driving. Precision-Machined External Bungs and Fittings: Ensure a perfect fit for factory hose connections. Kit Includes:

Turner Motorsport Aluminum Expansion Tank Performance Silicone Coolant Overflow Hose Expansion Tank Cap Coolant Level Sensor Product Development:

Our Heavy Duty Aluminum Expansion Tank was designed, engineered, tested, and quality inspected by our Research & Development team. Our development process includes leading-edge product technology: FARO laser scanning for reverse engineering and quality inspection, SolidWorks 3D CAD modeling, rapid prototyping utilizing our in-house 3D printer, and rigorous long-term product testing.

BMW is well-known for its problematic cooling systems, which are often a catalyst for irreversible engine damage and a hefty repair bill. The coolant expansion tank, a crucial component responsible for holding hot engine coolant under high pressure, is a common cause of cooling system issues. Unfortunately, BMW chose to manufacture the factory E90 M3 expansion tank out of plastic. After years of exposure to high coolant temperatures, ambient engine bay heat, and chemical-rich antifreeze, the plastic degrades, eventually weakening enough to fail catastrophically.

With this issue in mind, our team of BMW enthusiasts engineered the ultimate cooling system upgrade for E90 M3 owners: a heavy-duty expansion tank built to last! Crafted from durable 5052 TIG-welded aluminum, this tank resists high temperatures and pressures without degrading over time. Unlike the fragile OEM plastic tank, Turner’s design eliminates the risk of cracking, leaking, or failure. Upgrade to our Heavy Duty Aluminum Expansion Tank Kit and say goodbye to expansion tank issues for good!

To guarantee exact fitment, the upgraded tank was designed using advanced 3D CAD modeling. All bungs, nipples, and fittings are precision-machined to ensure a secure seal with factory hose ends. Unlike other aftermarket options, this tank maintains the factory coolant capacity and includes our laser-cut logo plate at the top, providing an accurate fill level. Internal baffles are incorporated to prevent fluid cavitation, eliminating air pockets in the cooling system and avoiding false coolant level warnings during spirited driving.

Engineered for high-performance builds and daily drivers alike, this expansion tank boasts a premium wrinkle black powder coat finish for a clean "OEM+" aesthetic. This tough coating not only enhances appearance but also protects against corrosion for long-term durability. The kit includes a silicone overflow hose, a high-quality level sensor, and an OE expansion tank cap, offering a complete cooling system upgrade. Avoid the risks of the factory expansion tank—upgrade your E46 M3 today and drive with confidence!

Features & Benefits:

Durable 5052 TIG-Welded Aluminum Construction: Ensures long-term reliability and eliminates expansion tank failure.
Premium Wrinkle Black Powder Coat Finish: Offers an "OEM+" appearance while preventing corrosion.
Factory Coolant Capacity Retention: Maintains the same coolant level as the original design.
Laser-Cut Turner Logo Plate: Provides a clear and accurate fill level indicator.
Internal Baffles: Prevent the introduction of air pockets during high-performance driving.
Precision-Machined External Bungs and Fittings: Ensure a perfect fit for factory hose connections.
Kit Includes:

Turner Motorsport Aluminum Expansion Tank
Performance Silicone Coolant Overflow Hose
Expansion Tank Cap
Billet coolant bleeder screw
Coolant Level Sensor
Product Development:

Our Heavy Duty Aluminum Expansion Tank was designed, engineered, tested, and quality inspected by our Research & Development team. Our development process includes leading-edge product technology: FARO laser scanning for reverse engineering and quality inspection, SolidWorks 3D CAD modeling, rapid prototyping utilizing our in-house 3D printer, and rigorous long-term product testing.

Installation:

- Click HERE for Installation Instructions -

Our Turner Motorsport's full aluminum expansion tank was designed and engineered in house to help with the weak point in your E36 cooling system. The coolant expansion tank goes through heat cycles over and over again from regular driving, it is important that your expansion tank is doing its job to retain coolant to keep your engine operating temperatures down and keep your engine bay clean. Not only is this a major upgrade but also a great maintenance item to replace. Our expansion tank was designed to fit the OEM hoses for an easy install and comes with all the upgraded items you will need for a clean install,

If your E36 needs a new expansion tank, make sure this is the last expansion tank you ever need to buy. Our coolant expansion tank has a full aluminum construction and wrinkle black powder coat for durability. Expansion tank kit comes with all the accessories you need to replace your expansion tank once, and never have to worry about it again.

Aluminum Coolant Expansion Tank Features:

- Maintains stock coolant capacity and expansion volume

- Designed to maintain OE coolant elevation, preventing air pockets

- Baffled tank ensures that air pockets cannot be introduced during aggressive driving and provides accurate coolant level reading

- Carefully designed bleed passage prevents the introduction of air as the engine cools

- Turner engraved internal fill level

- TIG welded 5052 aluminum construction

- All bungs are machined to fit factory hose ends

Kit contents:

Turner Aluminum Expansion Tank
Coolant level sensor
Expansion tank cap
Heavy duty bleeder screw
Flared coolant pressure release line
Hardware for installation

BMWs turbocharged S55 engine uses a water-to-air charge air cooling system, with a front-mounted heat exchanger responsible for heat dissipation. Unfortunately, the factory single-row, 27mm core design is quick to heat soak under high load, leading to excessive intake air temperatures and potential limp mode conditions especially on modified or track-driven cars.

To solve this issue, we've developed a drop-in upgrade over the factory unit. Engineered for durability and maximum cooling efficiency, this heat exchanger is a must-have for high-horsepower street builds, spirited canyon driving, and extended track sessions. Built from TIG-welded 5052 aluminum, our design eliminates the factory plastic end tanks one of the systems most common failure points. Each heat exchanger features CNC-machined billet aluminum hose connections, mounting flanges, and brackets for perfect OE fitment and trouble-free installation.

By replacing the OEM 27mm single-row core with a robust 35mm dual-row design, this heat exchanger dramatically increases both cooling capacity and surface area. Frontal area jumps from 307mm to 475mm, resulting in a 100% increase in coolant volume and significantly improved heat-soak resistance. The outcome? Lower, more stable charge air temperatures that help your S55 deliver consistent, reliable power on the street or at the track.

Replaces OEM part numbers 17112284608 and 17112459062.

Features:

5052 aluminum construction eliminates plastic end tank failures A performance-oriented, dual-row core provides a 55% increase in frontal surface area, and a 100.29% increase in coolant volume over the OE heat exchanger! OE Heat Exchanger: Single-row core 27mm core thickness 307mm core height ECS High Performance Aluminum Heat Exchanger: Dual-row core 35mm core thickness 475mm core height TIG-welded 5052 aluminum end tanks, polished to a mirror finish for a high-quality look CNC-machined connectors and bracketry ensure seamless fitment with factory cooling hoses, transmission cooler lines, condenser, and radiator Drop-in upgrade - no modifications required for installation! Product Development:

Our High Performance Aluminum Heat Exchanger was designed, engineered, tested, and quality inspected by our Research and Development team in our Wadsworth, Ohio, facility. We strive for the highest level of precision and quality through leading-edge product development technology, including FARO laser scanning for reverse engineering and quality inspection, SolidWorks 3D CAD modeling, rapid prototyping utilizing our in-house 3D printer, and rigorous long-term product testing.

Replace the Achilles heel of your factory cooling system with a stout and reliable mechanical thermostat setup.

The factory E46 thermostat housing is a combined unit featuring a plastic housing and a built in thermostat that you cannot replace separately. These plastic all-in-one units are commonly know to crack or fail causing a headache, a trip on the tow truck and possible damage to your engine.

Taking cues from the reliable M50 thermostat setup we designed a an assembly that not only converts your plastic housing into a billet aluminum unit but also swaps out the integrated thermostat for a separate replaceable thermostat. The ability to swap out thermostats separately from the whole housing opens up doors to changing thermostats to different temperature ratings based on your application while also providing lower maintenance costs. No longer do you have to replace the whole housing but just the thermostat itself.

The billet housing is designed to be utilized with E46 M3 upper and lower radiator hoses and also features -16 ORB connections for custom radiator hoses. A major upgrade from the factory and aftermarket plastic units. Our thermostat housing kit can be used by the savvy daily driver or the track hero who wants to ensure the durability of their cooling system.

Key benefits:

Uses M50/S50 mechanical thermostat for increased reliability
Option to use aftermarket colder thermostats if desired
Thermostat can be replaced separately for lower maintenance cost
Barbed hose connections for use with E46 M3 hoses or built in -16 ORB connections for custom radiator hoses
Design:

Machined out of a single piece of billet 6061 aluminum, this thermostat housing will withstand higher prolonged temperatures and abuse for performance applications
Black anodized with engraved Turner logo on the front to match the Turner Motorsports Power Steering Reservoir
Viton gasket for superior sealing performance
For use with E46 M3 radiator hoses 11537830715 and 11537830716
Kit contents:

6061 Billet Aluminum Thermostat Housing
Mechanical Thermostat
Thermostat Housing Gasket
Thermostat Harness
Optional Silicone or Rubber E46 M3 coolant hoses
Product Development:

Our Billet Thermostat Housing upgrade was designed, engineered, tested and quality inspected by our Research and Development team at Turner. Nothing but the highest level of precision and quality through leading-edge product development technology including FARO laser scanning for reverse engineering and quality inspection, SolidWorks 3D CAD modeling, rapid prototyping utilizing our in-house 3D printer and rigorous long term product testing.

Replace your factory, stamped aluminum radiator slam panel with a more lively gloss carbon fiber version for a look that sets your car apart from the rest.

Pop the hood! Say so long to the plain satin black radiator cover, our Turner carbon fiber engine cover looks so good along with the S58 and can transform the appearance of your engine bay in just minutes. One of the first things you do with a new car is take care of all the simple modifications to get the best out car without taking it apart. Remove your factory radiator slam panel and replace it with your new carbon fiber cover to check one modification off the list! Be the one who stands out from the other S58-equipped cars with their hoods open.

Our Turner Carbon radiator cover starts with a mold of the original component to get the best factory-form fitment possible. The cover is made from hand-laid carbon fiber material with pre-impregnated carbon fiber cloth and epoxy resin and finished in a beautiful gloss clear coat for UV-protection and extra durability. Be sure to check out the other incredible carbon fiber pieces Turner offers to enhance your G chassis!

Tired of dealing with brittle, dry-rotted rubber hoses? Whether you're refreshing your cooling system or replacing aging components, our Silicone Radiator Coolant Hose Set is the ultimate upgrade. Designed for durability, performance, and a factory-perfect fit, these premium silicone hoses outperform standard rubber in every way.

Why Choose Silicone Over Rubber?

Made from heavy-duty, reinforced 4-ply fluorosilicone, Turner Motorsport hoses withstand extreme temperatures and pressures far beyond OEM rubber hoses. Engineered to resist oil, fuel, and electrochemical degradation, these hoses are tested for continuous operation at 250°F and over 45 psi, delivering superior reliability, reduced turbulence, and improved coolant flow.

Replaces OEM Part Numbers: 17127596837 & 17127596838. Can be used with your factory connectors.

BMW N47 N55 Expansion Tank from Turner Motorsport is a high-quality replacement designed to address issues with cracked or damaged coolant expansion tanks. Engineered for durability and performance, this expansion tank ensures reliable cooling system function.

• Durable Construction: Built to withstand high temperatures and pressure, ensuring long-term reliability.
• Direct Replacement: Engineered as a precise fit for BMW N47 and N55 engines, making installation straightforward and hassle-free.
• Enhanced Cooling Efficiency: Maintains optimal coolant levels and pressure for effective engine cooling.
• High-Quality Materials: Manufactured from premium materials to resist cracking and leaks.

BMW N20 2.0L Turbo Supply Cooling Line is a crucial component designed to ensure optimal cooling for the turbocharger in BMW vehicles equipped with the N20 2.0L turbo engine. This high-quality cooling line maintains proper coolant flow to the turbo, preventing overheating and ensuring reliable performance.

• Optimal Cooling: Effectively cools the turbocharger to prevent overheating and maintain performance.
• Durable Construction: Built with high-quality materials for long-lasting reliability.
• Precise Fitment: Designed specifically for BMW N20 2.0L turbo engines.
• Enhanced Performance: Helps in sustaining the turbo's efficiency and longevity.
• Easy Installation: Direct replacement part for a hassle-free installation.

Maintain the efficiency and longevity of your BMW’s turbocharger with this essential cooling line, designed for superior performance and durability.

These high quality silicone hoses feature stock-type quick-disconnect fittings - no need to cut up your old hoses to get the connectors off! Unlike factory rubber hoses, silicone can withstand higher temperatures and pressures with minmal wear. Rubber will wear out and weaken so don't let it bite you when it counts! Silicone has been proven during extreme racing conditions and won't be the weak link that ruins your day.

The pre-attached stock-style plastic quick-disconnect fittings include new O-rings, providing a reliable leak-free seal during installation. We do not recommend re-using the temp sensor located in the lower radiator hose. You can add a new one to your order from the options below.