Find Parts That Fit Your Vehicle

Home
Cooling

BMW Cooling System Parts & Accessories

The cooling system is arguably the weakest point in numerous BMWs. If you drive an aging BMW or plan on taking your car to the track like we do, we recommend beefing up your cooling system before going to the track. Generally, the main components in your cooling system that are prone to failure include the following: expansion tank, factory hoses, water pump, thermostat, fan (especially if your vehicle comes factory with a clutch fan), and radiator. Factory BMW expansion tanks are plastic and prone to either breaking off at connection points or combusting. As factory rubber hoses age they either crack or break over time - we offer silicone cooling hose upgrades for most applications to avoid future failures. If you have an older vehicle, your water pump likely comes from the factory with a plastic impeller - we offer upgraded water pumps with metal impellers that are far more reliable. Newer model BMWs utilize electric water pumps - BMW spent millions of dollars engineering these water pumps, but they fail so often that we recommend replacing at 60,000 mile service intervals to avoid being stranded on the side of the road. In terms of thermostats, we offer various upgraded thermostats for racing applications. If your BMW utilizes a clutch fan from the factory, we have several options available in terms of universal electric fans - we recommend replacing these to avoid sending brittle plastic fan blades through your hood. For radiators, we recommend swapping out your radiator for one that does not use plastic connection points like your factory radiator.

Sub-Categories

Sort By:

BMW E46 M54 AAF Low Temp Thermostat Kit - Partial

T#:7624632

Part#: 116211.2

Ships in 1 Business Day

$ 85.00 USD

Add to Wish List

Qty

$ 85.00 USD

Add to Wish List

BMW E46 M54 AAF Low Temp Thermostat Kit - Partial is an essential upgrade for enthusiasts looking to optimize engine performance and reliability. Developed by Advanced Auto Fabrication (AAF), this kit addresses the limitations of the factory M54 thermostat, which maintains a temperature range of 80-103°C and opens the mechanical failsafe at 110°C. For race conditions where maintaining a lower temperature is crucial, this kit replaces the stock electronic thermostat with a manual unit, allowing the engine to run at a safer and more efficient temperature. This upgrade not only enhances engine longevity but also reduces stress from high-temperature operation, minimizes heat soak, and increases power.

Optimal Temperature Control: Replaces the factory thermostat for improved engine temperature management.
Enhanced Engine Longevity: Operates at safer temperatures, reducing stress and extending engine life.
Increased Power: Lower operating temperatures can lead to better engine performance.
Reduced Heat Soak: Helps prevent overheating and ensures efficient cooling.
Improved Reliability: Manual thermostat unit offers more consistent performance in racing conditions.

Partial Kit Contents:

Thermostat housing plate
Thermostat
Installation hardware

Show More Show Less

OEM INA Water Pump - BMW N54 N55 3.0L

T#:40004835

Part#: 11515A05704

In Stock

$ 445.99 USD

Add to Wish List

Qty

$ 445.99 USD

Add to Wish List

Water pumps are a critical component of your cooling system. A failed water pump will stop the flow of coolant in your vehicle, leading to overheating and eventual engine damage. Replace your faulty or aging water pump with a high-quality OEM unit from Schaeffler. Replacement for BMW part # 11519455978, 11517632426, and 11517563659.

Show More Show Less

AAF Transmission Crossmembers 5-Speed - E46 Non-M

Fits ZF and Getrag Transmissions. Non-M models Only

T#:7608860

Part#: 116110

In Stock at Vendor

$ 190.00 USD

Add to Wish List

Qty

$ 190.00 USD

Add to Wish List

Since 2010, Advanced Auto Fabrication has been producing and developing both parts and full fledged race cars. Their knowledge base covers a wide range of vehicles both domestic and imported. In the specific case of BMW, the team at AAF has a particular affinity for building and designing components for BMW race cars. Ideal for the SE46 racing series, the AAF E46 5-speed Transmission Crossmember is a heavy-duty and worthwhile upgrade. The OEM thin cast aluminum cross member has been known to fail in multiple different ways. When using stiff engine and transmission mounts, the cross member can crack out and break around these mounting points. The cross member can also break from the high amounts of load transferred through the drive train. While chassis flex from hard cornering is being applied through the engine and transmission from the front cross member, this load is sent from the transmission back into the chassis at the transmission cross member. This is simply too much stress for the OEM cross member to hold up to under the extreme punishment of road racing. The AAF E46 Transmission Cross Member is completely constructed of 1/4' thick heavy-duty aluminum plate. It is designed specifically to cope with hours of endurance racing.

Show More Show Less

AAF Low Temp Thermostat Kit - Full Kit - E46

T#:7624630

Part#: 116211

In Stock at Vendor

$ 175.00 USD

Add to Wish List

Qty

$ 175.00 USD

Add to Wish List

Since 2010, Advanced Auto Fabrication has been producing and developing both parts and full fledged race cars. Their knowledge base covers a wide range of vehicles both domestic and imported. In the specific case of BMW, the team at AAF has a particular affinity for building and designing components for BMW race cars. The factory M54 thermostat is electronically controlled to keep the engine running between 80-103°C, whereas race cars like to maintain 80°C or less for maximum power. Additionally, the mechanical failsafe doesn’t open up until the coolant temperature reaches 110°C, or 230°F, which is about the point when most race cars are turned off and parked which is no good for the motor! The AAF E46 M54 Low Temp Thermostat Kit is designed to give the control of proper engine operating temperature back by replacing the stock electronic thermostat with a manual unit. This allows the engine to run at the proper, and much safer, operating temperature, improving engine longevity, reduces stress from high-temp. operation, reduces heat soak, and increases power! Full Kit Contents: Thermostat housing Thermostat housing plate Thermostat install hardware sealant

Show More Show Less

BMW E46 AAF Aluminum Radiator Mounting Kit

T#:7608839

Part#: 11641

In Stock at Vendor

$ 189.00 USD

Add to Wish List

Qty

$ 189.00 USD

Add to Wish List

BMW E46 AAF Aluminum Radiator Mounting Kit provides a robust solution for mounting an aluminum radiator into the BMW E46 chassis without relying on the stock plastic mounts. Developed by Advanced Auto Fabrication, a company renowned for their expertise in producing high-performance race car components, this kit reflects their extensive knowledge and dedication to BMW race car design.

The mounting kit is designed to replace the stock mounting system and is compatible with lightweight aftermarket fans, as the stock electric fan cannot be used. Please note that this kit does not fit M3 models.

Durable Construction: Made from high-quality aluminum for strength and longevity.
Enhanced Cooling Efficiency: Allows for the use of aftermarket fans for improved cooling performance.
Race-Ready Design: Reflects Advanced Auto Fabrication's expertise in BMW race car components.
No Stock Plastic Mounts: Provides a more reliable and robust mounting solution than the factory system.

Show More Show Less

RADIATOR 3.2L- 2 CORE- ALSO FIT M COUPE M ROADSTER- E36

T#:20946747

Part#: RAD3Z398

Ships in 7 Business Days

$ 152.99 USD

Add to Wish List

Qty

$ 152.99 USD

Add to Wish List

1 piece of 2-row radiator Made of lightweight & long-lasting aluminum material Overall dimension: 24.5" (L) x 2.75" (W) x 18.5" (H) Inlet: 1.5"/ Outlet: 1.5" Provides maximum cooling efficiency

AAF E46 Transmission Crossmembers - 6-Speed Non-M

For use with solid front engine mounts only!

T#:7624639

Part#: 116222

In Stock

$ 190.00 USD

Add to Wish List

Qty

$ 190.00 USD

Add to Wish List

Since 2010, Advanced Auto Fabrication has been producing and developing both parts and full fledged race cars. Their knowledge base covers a wide range of vehicles both domestic and imported. In the specific case of BMW, the team at AAF has a particular affinity for building and designing components for BMW race cars. Ideal for the SE46 racing series, the AAF E46 6-speed Transmission Crossmember is a heavy-duty and worthwhile upgrade. The OEM thin cast aluminum cross member has been known to fail in multiple different ways. When using stiff engine and transmission mounts, the cross member can crack out and break around these mounting points. The cross member can also break from the high amounts of load transferred through the drive train. While chassis flex from hard cornering is being applied through the engine and transmission from the front cross member, this load is sent from the transmission back into the chassis at the transmission cross member. This is simply too much stress for the OEM cross member to hold up to under the extreme punishment of road racing. The AAF E46 Transmission Cross Member is completely constructed of 1/4' thick heavy-duty aluminum plate. It is designed specifically to cope with hours of endurance racing.

Show More Show Less

AAF E46 Radiator Fan Shroud

T#:7624641

Part#: 116251

In Stock at Vendor

$ 140.00 USD

Add to Wish List

Qty

$ 140.00 USD

Add to Wish List

Since 2010, Advanced Auto Fabrication has been producing and developing both parts and full fledged race cars. Their knowledge base covers a wide range of vehicles both domestic and imported. In the specific case of BMW, the team at AAF has a particular affinity for building and designing components for BMW race cars. AAF has created a light-weight fan shroud for your E46 race car. Equipped with 7 flaps to let as much air through as possible at speed and fits a 14' fan. Seamlessly attaches to the AAF Radiator Mounts. The shroud creates a vacuum to expand the fan’s ability to pull from the entire surface area of the radiator. This creates cooler temps under the hood with the benefit of 7 flaps that allow the most air to pass through. **AAF states fitment has only been thoroughly tested with their radiator mounts. No fitment info for the stock plastic mounts is available at this time. AAF has created a light-weight fan shroud for your E46 race car. Equipped with 7 flaps to let as much air through as possible at speed and fits a 14' fan. Seamlessly attaches to the AAF Radiator Mounts. The shroud creates a vacuum to expand the fan’s ability to pull from the entire surface area of the radiator. This creates cooler temps under the hood with the benefit of 7 flaps that allow the most air to pass through. **AAF states fitment has only been thoroughly tested with their radiator mounts. No fitment info for the stock plastic mounts is available at this time. *Does not include fan.

Show More Show Less

AAF E46 Transmission Crossmembers - 6-Speed M

For M Models

T#:7624640

Part#: 116223

Ships in 3 Business Days

$ 190.00 USD

Add to Wish List

Qty

$ 190.00 USD

Add to Wish List

Since 2010, Advanced Auto Fabrication has been producing and developing both parts and full fledged race cars. Their knowledge base covers a wide range of vehicles both domestic and imported. In the specific case of BMW, the team at AAF has a particular affinity for building and designing components for BMW race cars. Ideal for the SE46 racing series, the AAF E46 6-speed Transmission Crossmember is a heavy-duty and worthwhile upgrade. The OEM thin cast aluminum cross member has been known to fail in multiple different ways. When using stiff engine and transmission mounts, the cross member can crack out and break around these mounting points. The cross member can also break from the high amounts of load transferred through the drive train. While chassis flex from hard cornering is being applied through the engine and transmission from the front cross member, this load is sent from the transmission back into the chassis at the transmission cross member. This is simply too much stress for the OEM cross member to hold up to under the extreme punishment of road racing. The AAF E46 Transmission Cross Member is completely constructed of 1/4' thick heavy-duty aluminum plate. It is designed specifically to cope with hours of endurance racing.

Show More Show Less

OEM INA Electronic Thermostat And Coolant Distribution Module - BMW B...

We Price Match - Give Us A Call or Chat!

T#:36201645

Part#: 11538642559

In Stock

$ 367.99

This product was last offered at the strikethrough price on
07-23-2026

$ 356.99 USD

Add to Wish List

Qty

$ 356.99 USD

Add to Wish List

Engineered specifically for BMW models, the electronic thermostat and coolant distribution module plays a vital role in the engine’s cooling system, adapting to changing temperatures for superior performance under all driving conditions. Whether on the track or the highway, this module ensures your BMW runs cooler, longer, and more efficiently.

Show More Show Less

Aluminum 2-Row Performance Radiator - 1998-2002 BMW E36 Z3 M Coupe/Ro...

T#:14684348

Part#: RAD3-Z398

Ships in 7 Business Days

$ 152.99 USD

Add to Wish List

Qty

$ 152.99 USD

Add to Wish List

Brand new in original box 1 piece of 2-row radiator Made of lightweight & long-lasting aluminum material Overall dimension: 24.5" (L) x 2.75" (W) x 18.5" (H) Inlet: 1.5"/ Outlet: 1.5" Provides maximum cooling efficiency Professional installation is recommended

Show More Show Less

Motorsport Thermostat - 60C - Complete with Housing - M54 / M52tu ...

T#:1171

Part#: TMS1171

Ships in 7 Business Days

$ 415.45 USD

Add to Wish List

Qty

$ 415.45 USD

Add to Wish List

This is a genuine BMW Motorsport part, designed specifically for BMW racing applications. We use this exact thermostat setup in our Championship-winning E46 330i race car. It is designed to be used on all M54 and M52TU double-VAN0S engines, as used in the 1999-2000 E46 323/328 and 2001-2005 E46 325/330. This 60 degree C (140 defrees F) thermostat comes complete with plastic thermostat housing. It does not use the plug and wiring for the stock DME so this should only be used with an aftermarket engine management system (Motec, Bosch, etc).

When doing any sort of repair or maintenance there is no replacement for genuine factory parts. Turner Motorsport carries the Genuine BMW brand with pride and has the parts you need to complete your next project with confidence.

Show More Show Less

BMW Motorsports Water Pump w/ Upgraded Aluminum Impeller - E9X M3 ...

T#:5574

Part#: 11518331044

Special Order: No Guaranteed ETA

$ 999.99 USD

Add to Wish List

Qty

$ 999.99 USD

Add to Wish List

Upgrade from the plastic impeller on the stock water pump to this aluminum impeller pump originally developed by BMW for the M3 GT4. This aluminum water pump was designed to stand up to the abuse of racing but can be used on a standard street car.

Show More Show Less

Motorsport Thermostat - 55 (NO LONGER AVAILABLE)

T#:337991

Part#: 11531417215

Back Ordered

Starting at $ 233.98 USD

Add to Wish List

Starting at $ 233.98 USD

Add to Wish List

E46M3 Motorsport Thermostat 55C (Also fits Euro E36 M3 engine) A Genuine BMW part this thermostat opens at a much lower temperature than stock to keep your S54 engine (or Euro S50/S52 engine) running cooler in race applications.

Show More Show Less

OEM INA Heat Management Module - MINI F5X F60 B36 B46

We Price Match - Give Us A Call or Chat!

T#:34214774

Part#: 11538631943

In Stock

$ 264.99 USD

Add to Wish List

Qty

$ 264.99 USD

Add to Wish List

Maximize performance and safeguard your engine with the Heat Management Module, engineered to deliver superior temperature control and reliability under extreme conditions.

OEM INA Water Pump - BMW N52 3.0L

We Price Match - Give Us A Call or Chat!

T#:36201646

Part#: 11517586925

Ships in 7 Business Days

$ 624.99 USD

Add to Wish List

Qty

$ 624.99 USD

Add to Wish List

Choose the INA Water Pump for E90 E92 and E93 to ensure your BMW’s cooling system operates efficiently, providing peace of mind and reliable performance on every drive.

INA Water Pump for E60 , E71 and F10

We Price Match - Give Us A Call or Chat!

T#:36574507

Part#: 11517632426

Back Ordered

$ 691.99 USD

Add to Wish List

Qty

$ 691.99 USD

Add to Wish List

This premium replacement water pump is engineered to OE specifications for performance, reliability, and longevity, making it an essential component for maintaining optimal engine temperatures

Select Vehicle

Purpose

Category

Home

Cooling

Brand

View All Brands

Price

Shipping