BMW Coolant & Radiator Hoses

Upgraded or replacement silicone heater hose for our N54 expansion tank relocation kits.

60" silicone performance coolant hose featuring a molded 90-degree bend for installs with space constraints.

Features and benefits:

Constructed of 4-Ply reinforced silicone for improved durability over the failure-prone rubber hoses.
Reduced thermal conductivity
Improved resistance to ozone and UV degradation for improved performance and durability.
Turner branded

Replace the Achilles heel of your factory cooling system with a stout and reliable mechanical thermostat setup.

The factory E46 thermostat housing is a combined unit featuring a plastic housing and a built in thermostat that you cannot replace separately. These plastic all-in-one units are commonly know to crack or fail causing a headache, a trip on the tow truck and possible damage to your engine.

Taking cues from the reliable M50 thermostat setup we designed a an assembly that not only converts your plastic housing into a billet aluminum unit but also swaps out the integrated thermostat for a separate replaceable thermostat. The ability to swap out thermostats separately from the whole housing opens up doors to changing thermostats to different temperature ratings based on your application while also providing lower maintenance costs. No longer do you have to replace the whole housing but just the thermostat itself.

The billet housing is designed to be utilized with E46 M3 upper and lower radiator hoses and also features -16 ORB connections for custom radiator hoses. A major upgrade from the factory and aftermarket plastic units. Our thermostat housing kit can be used by the savvy daily driver or the track hero who wants to ensure the durability of their cooling system.

Key benefits:

Uses M50/S50 mechanical thermostat for increased reliability
Option to use aftermarket colder thermostats if desired
Thermostat can be replaced separately for lower maintenance cost
Barbed hose connections for use with E46 M3 hoses or built in -16 ORB connections for custom radiator hoses
Design:

Machined out of a single piece of billet 6061 aluminum, this thermostat housing will withstand higher prolonged temperatures and abuse for performance applications
Black anodized with engraved Turner logo on the front to match the Turner Motorsports Power Steering Reservoir
Viton gasket for superior sealing performance
For use with E46 M3 radiator hoses 11537830715 and 11537830716
Kit contents:

6061 Billet Aluminum Thermostat Housing
Mechanical Thermostat
Thermostat Housing Gasket
Thermostat Harness
Optional Silicone or Rubber E46 M3 coolant hoses
Product Development:

Our Billet Thermostat Housing upgrade was designed, engineered, tested and quality inspected by our Research and Development team at Turner. Nothing but the highest level of precision and quality through leading-edge product development technology including FARO laser scanning for reverse engineering and quality inspection, SolidWorks 3D CAD modeling, rapid prototyping utilizing our in-house 3D printer and rigorous long term product testing.

Tired of dealing with brittle, dry-rotted rubber hoses? Whether you're refreshing your cooling system or replacing aging components, our Silicone Radiator Coolant Hose Set is the ultimate upgrade. Designed for durability, performance, and a factory-perfect fit, these premium silicone hoses outperform standard rubber in every way.

Why Choose Silicone Over Rubber?

Made from heavy-duty, reinforced 4-ply fluorosilicone, Turner Motorsport hoses withstand extreme temperatures and pressures far beyond OEM rubber hoses. Engineered to resist oil, fuel, and electrochemical degradation, these hoses are tested for continuous operation at 250°F and over 45 psi, delivering superior reliability, reduced turbulence, and improved coolant flow.

Replaces OEM Part Numbers: 11537848501 & 11537848502. Can be used with your factory connectors.

Tired of dealing with brittle, dry-rotted rubber hoses? Whether you're refreshing your cooling system or replacing aging components, our Silicone Radiator Coolant Hose Set is the ultimate upgrade. Designed for durability, performance, and a factory-perfect fit, these premium silicone hoses outperform standard rubber in every way.

Why Choose Silicone Over Rubber?

Made from heavy-duty, reinforced 4-ply fluorosilicone, Turner Motorsport hoses withstand extreme temperatures and pressures far beyond OEM rubber hoses. Engineered to resist oil, fuel, and electrochemical degradation, these hoses are tested for continuous operation at 250°F and over 45 psi, delivering superior reliability, reduced turbulence, and improved coolant flow.

Replaces OEM Part Numbers: 17127596837 & 17127596838. Pre-assembled with factory "quick-connect" hose ends for easy installation!

• Upgraded Billet 6061-T6 connectors for enhanced durability
• Corrosion-resistant black anodized finish
• 6-ply molded silicone hoses for superior performance
• Factory-shaped design for easy installation

Positioned directly in the charge pipe's path, the stock B58TU upper cylinder head cooling hose, primarily made of plastic, is prone to damage. A dislodged charge pipe can easily take out this cooling hose, leading to severe engine damage through rapid coolant loss and overheating.

To address this vulnerability, VTT has engineered a robust solution. By replacing the OEM rubber hose with a durable 7-ply silicone variant, they offer superior resilience and longevity. Furthermore, they've upgraded the factory plastic flanges to 6061-T6 billet aluminum with black anodizing, enhancing corrosion resistance.

This upgraded hose is the ultimate solution, providing protection against dislodged charge pipes and the heat generated from spirited driving or track use.

Key Features:

Direct factory replacement for easy installation 6061-T6 billet aluminum with black anodizing for improved corrosion resistance Durable 7-ply silicone available in three colors Upgrade your BMW B58TU engine with this enhanced cooling hose from Vargas Turbo Technologies for superior performance and reliability.

Upgrade your cooling system with this kit, designed to address common issues with factory plastic cooling hose connectors and hoses. This kit features high-quality upgrades, including 6061-T6 billet aluminum connectors and 6-ply silicone hoses, ensuring durability and reliability.

Included in this comprehensive kit are:

Upper Radiator Hose (OEM Part 17128616548) Lower Radiator Hose (OEM Part 17128633482) Expansion Tank Hose (OEM Part 17128620944) Upper Vent Hose (OEM Part 17128616555)

Say goodbye to brittle plastic and dried-out hoses, and enjoy a more robust and long-lasting cooling system for your vehicle.