BMW Coolant Expansion Tanks

Our Turner Motorsport's full aluminum expansion tank was designed and engineered in house to help with the weak point in your E46 cooling system. The coolant expansion tank goes through heat cycles over and over again from regular driving, it is important that your expansion tank is doing its job to retain coolant to keep your engine operating temperatures down and keep your engine bay clean. Not only is this a major upgrade but also a great maintenance item to replace. Our expansion tank was designed to fit the OEM hoses for an easy install and comes with all the upgraded items you will need for a clean install.

If your BMW needs a new expansion tank, make sure this is the last expansion tank you ever need to buy. Our coolant expansion tank has a full aluminum construction and wrinkle black powder coat for durability. Expansion tank kit comes with all the accessories you need to replace your expansion tank once, and never have to worry about it again.

Product Features:

Maintains stock coolant capacity and expansion volume
Designed to maintain OE coolant elevation, preventing air pockets
Baffled tank ensures that air pockets cannot be introduced during aggressive driving and provides accurate coolant level reading
Carefully designed bleed passage prevents the introduction of air as the engine cools
Turner engraved internal fill level
TIG welded 5052 aluminum construction
All bungs are machined to fit factory hose ends
Kit contents:

Turner Aluminum Expansion Tank
Coolant level sensor
Expansion tank cap
Flared coolant pressure release line
Hardware for installation
Product Development:

Turner expansion tanks are designed, engineered, tested and quality inspected by our Research and Development team at Turner. Nothing but the highest level of precision and quality through leading-edge product development technology including FARO laser scanning for reverse engineering and quality inspection, SolidWorks 3D CAD modeling, rapid prototyping utilizing our in-house 3D printer and rigorous long term product testing.

BMWs are well-known for their problematic cooling systems, which are often a catalyst for irreversible engine damage and a hefty repair bill. The coolant expansion tank—a crucial component responsible for holding hot engine coolant under high pressure—is a common cause of cooling system issues. Unfortunately, BMW chose to manufacture the factory E46 M3 expansion tank out of plastic. After years of exposure to high coolant temperatures, ambient engine bay heat, and chemical-rich antifreeze, the plastic degrades, eventually weakening enough to fail catastrophically.

With this issue in mind, our team of BMW enthusiasts engineered the ultimate cooling system upgrade for E46 M3 owners: a heavy-duty expansion tank built to last! Crafted from durable 5052 TIG-welded aluminum, this tank resists high temperatures and pressures without degrading over time. Unlike the fragile OEM plastic tank, Turner’s design eliminates the risk of cracking, leaking, or failure. Upgrade to our Heavy Duty Aluminum Expansion Tank Kit and say goodbye to expansion tank issues for good!

To guarantee exact fitment, the upgraded tank was designed using advanced 3D CAD modeling. All bungs, nipples, and fittings are precision-machined to ensure a secure seal with factory hose ends. Unlike other aftermarket options, this tank maintains the factory coolant capacity and includes our laser-cut logo plate at the top, providing an accurate fill level. Internal baffles are incorporated to prevent fluid cavitation, eliminating air pockets in the cooling system and avoiding false coolant level warnings during spirited driving.

Engineered for high-performance builds and daily drivers alike, this expansion tank boasts a premium wrinkle black powder coat finish for a clean "OEM+" aesthetic. This tough coating not only enhances appearance but also protects against corrosion for long-term durability. The kit includes a silicone overflow hose, a high-quality level sensor, and an OE expansion tank cap, offering a complete cooling system upgrade. Avoid the risks of the factory expansion tank—upgrade your E46 M3 today and drive with confidence!

Features & Benefits:

Durable 5052 TIG-Welded Aluminum Construction: Ensures long-term reliability and eliminates expansion tank failure. Premium Wrinkle Black Powder Coat Finish: Offers an "OEM+" appearance while preventing corrosion. Factory Coolant Capacity Retention: Maintains the same coolant level as the original design. Laser-Cut Turner Logo Plate: Provides a clear and accurate fill level indicator. Internal Baffles: Prevent the introduction of air pockets during high-performance driving. Precision-Machined External Bungs and Fittings: Ensure a perfect fit for factory hose connections. Kit Includes:

Turner Motorsport Aluminum Expansion Tank Performance Silicone Coolant Overflow Hose Expansion Tank Cap Coolant Level Sensor Product Development:

Our Heavy Duty Aluminum Expansion Tank was designed, engineered, tested, and quality inspected by our Research & Development team. Our development process includes leading-edge product technology: FARO laser scanning for reverse engineering and quality inspection, SolidWorks 3D CAD modeling, rapid prototyping utilizing our in-house 3D printer, and rigorous long-term product testing.

BMWs are well-known for their problematic cooling systems, which are often the cause of irreversible engine damage and a hefty repair bill. The coolant expansion tank—a crucial component responsible for holding hot engine coolant under high pressure—is a common cause of cooling system issues. Unfortunately, BMW chose to manufacture the factory F8X expansion tank out of plastic. After years of exposure to high coolant temperatures, ambient engine bay heat, and chemical-rich antifreeze, the plastic degrades, eventually weakening enough to fail catastrophically.

With this issue in mind, our team of BMW enthusiasts engineered the ultimate cooling system upgrade for F80 M3, F82/F83 M4, and F87 M2 Competition owners: a heavy-duty expansion tank that is built to last! Crafted from durable 5052 TIG-welded aluminum, this tank resists high temperatures and pressures without degrading over time. Unlike the fragile OEM plastic tank, our design eliminates the risk of cracking, leaking, or failure. Upgrade to our Heavy Duty Aluminum Expansion Tank Kit and say goodbye to expansion tank issues for good!

To guarantee exact fitment, the upgraded tank was designed using advanced 3D CAD modeling. All bungs, nipples, and fittings are precision-machined to ensure a secure seal with factory hose ends. Unlike other aftermarket options, this tank maintains the factory coolant capacity and includes our laser-cut logo plate at the top, providing an accurate fill level. Internal baffles are incorporated to prevent fluid cavitation, eliminating air pockets in the cooling system and avoiding false coolant level warnings during spirited driving.

Engineered for high-performance builds and daily drivers alike, this expansion tank boasts a premium wrinkle black powder coat finish for a clean "OEM+" aesthetic. This tough coating not only enhances appearance but also protects against corrosion for long-term durability. The kit includes a silicone overflow hose, a high-quality level sensor, and an OE expansion tank cap, offering a complete cooling system upgrade. Avoid the risks of the factory expansion tank—upgrade your S55-equipped BMW today and drive with confidence!

Features & Benefits:

Durable 5052 TIG-Welded Aluminum Construction: Ensures long-term reliability and eliminates expansion tank failure. Premium Wrinkle Black Powder Coat Finish: Offers an "OEM+" appearance while preventing corrosion. Factory Coolant Capacity Retention: Maintains the same coolant level as the original design. Laser-Cut Turner Logo Plate: Provides a clear and accurate fill level indicator. Internal Baffles: Prevent the introduction of air pockets during high-performance driving. Precision-Machined External Bungs and Fittings: Ensure a perfect fit for factory hose connections. Proprietary Coolant Level Sensor with Wiring Harness Adapter: Provides a plug-and-play, CEL-free functionality. Kit Includes:

Turner Motorsport Aluminum Expansion Tank Performance Silicone Coolant Overflow Hose 6mm Nipple Fitting Expansion Tank Cap Coolant Level Sensor Coolant Level Sensor Wiring Harness Adapter

Our Turner Motorsport's full aluminum expansion tank was designed and engineered in house to help with the weak point in your E36 cooling system. The coolant expansion tank goes through heat cycles over and over again from regular driving, it is important that your expansion tank is doing its job to retain coolant to keep your engine operating temperatures down and keep your engine bay clean. Not only is this a major upgrade but also a great maintenance item to replace. Our expansion tank was designed to fit the OEM hoses for an easy install and comes with all the upgraded items you will need for a clean install,

If your E36 needs a new expansion tank, make sure this is the last expansion tank you ever need to buy. Our coolant expansion tank has a full aluminum construction and wrinkle black powder coat for durability. Expansion tank kit comes with all the accessories you need to replace your expansion tank once, and never have to worry about it again.

Aluminum Coolant Expansion Tank Features:

- Maintains stock coolant capacity and expansion volume

- Designed to maintain OE coolant elevation, preventing air pockets

- Baffled tank ensures that air pockets cannot be introduced during aggressive driving and provides accurate coolant level reading

- Carefully designed bleed passage prevents the introduction of air as the engine cools

- Turner engraved internal fill level

- TIG welded 5052 aluminum construction

- All bungs are machined to fit factory hose ends

Kit contents:

Turner Aluminum Expansion Tank
Coolant level sensor
Expansion tank cap
Heavy duty bleeder screw
Flared coolant pressure release line
Hardware for installation

Enhance the flexibility of your BMW's coolant system with the Vargas Turbo Technologies 90-Degree Coolant Tank Fitting. Ideal for applications such as single turbo setups or forward-facing intake manifolds, this fitting provides extra clearance and versatile hose routing options.

Key Benefits:

• Allows hose to run straight down, increasing clearance
• Made of durable 6061-T6 aluminum for long-lasting performance
• Anodized black finish for enhanced durability and corrosion resistance
• Includes fitting and clamp for easy installation

Upgrade your BMW's coolant system with the Vargas Turbo Technologies 90-Degree Coolant Tank Fitting for improved performance and versatility.

BMW Blue Engine Coolant Reservoir Cap is the perfect upgrade for BMW owners looking to enhance both the performance and appearance of their engine bay. Constructed from high-quality billet aluminum, this cap replaces the flimsy plastic factory cap, offering improved durability and a sleek, high-performance aesthetic.

Designed with precision, this coolant reservoir cap incorporates the OEM pressure relief function to maintain proper cooling system operation. Unlike inferior stick-on covers that may loosen over time, this cap is a complete replacement, ensuring a secure, leak-free fit. The blue anodized finish provides superior corrosion resistance, making it a reliable upgrade for daily drivers and track enthusiasts alike.

• OEM pressure relief function – Ensures proper cooling system performance and safety
• Billet aluminum construction – Provides enhanced durability and strength over factory plastic caps
• Direct-fit replacement – Fully replaces the stock cap for a precise, secure fit
• Blue anodized finish – Resists corrosion, heat, and wear for long-lasting performance
• Motorsport-inspired design – Adds a sleek, professional look to the engine bay
• Built for longevity – Engineered to withstand extreme temperatures and coolant exposure

Upgrade your BMW’s cooling system with the BMW Blue Engine Coolant Reservoir Cap, designed for superior reliability and style.

BMW Black Engine Coolant Reservoir Cap is a premium upgrade designed to enhance both the functionality and aesthetics of your BMW’s engine bay. Unlike flimsy plastic OEM caps, this high-performance cap is CNC-machined from durable billet aluminum, providing long-lasting strength and a sleek, motorsport-inspired look.

Built with precision, this cap retains the essential OEM pressure release function, ensuring proper cooling system operation without compromise. Unlike inferior adhesive covers that may detach over time, this cap fully replaces the factory component, delivering a secure and reliable fit. With a corrosion-resistant black anodized finish, it withstands extreme temperatures and harsh conditions while elevating your BMW’s under-hood appearance.

• OEM pressure regulation – Maintains factory-designed pressure release for optimal cooling performance
• CNC-machined billet aluminum – Provides exceptional durability and long-term reliability
• Direct replacement – Fully replaces the stock cap, ensuring a perfect fit without modifications
• Corrosion-resistant anodized finish – Prevents wear and adds a stealthy, high-performance look
• Heat and fluid-resistant design – Built to withstand extreme temperatures and coolant exposure
• Enhanced engine bay styling – Offers a sleek, motorsport-inspired upgrade

Upgrade your BMW’s cooling system with the BMW Black Engine Coolant Reservoir Cap, designed for superior performance and long-lasting durability.

BMW Blue Auxiliary Coolant Reservoir Cap is the perfect upgrade for BMW owners looking to enhance both the aesthetics and functionality of their engine bay. Unlike generic aftermarket caps that overlook critical pressure regulation, this precision-engineered cap retains the OEM pressure release functionality, ensuring safe and reliable coolant system performance.

Crafted from high-quality billet aluminum, this reservoir cap offers superior durability and resistance to heat and fluids, preventing warping or degradation over time. Unlike adhesive-based cap covers that can loosen or fall off, this cap is a direct replacement for the factory component, providing a secure, high-performance solution.

• OEM pressure release functionality – Maintains proper system regulation for optimal coolant performance
• Premium billet aluminum construction – Offers enhanced durability and longevity
• Direct replacement design – Secure fit without adhesives or modifications
• Resistant to heat and fluids – Ensures long-lasting reliability in extreme conditions
• Performance-inspired look – Adds a sleek, high-end appearance to your engine bay
• Upgraded durability – Prevents cracking, leaks, and premature wear

Upgrade your BMW’s cooling system with the BMW Blue Auxiliary Coolant Reservoir Cap, blending performance, reliability, and premium styling.

Upgrade your Gen1 Mini Cooper or Cooper S with the coolant expansion/fill tank featuring a billet radiator-style neck. This tank accepts the Canton Racing part #81-030 pressure cap or any 30 psi radiator-style cap. The Canton Racing Aluminum tank with Powdercoated Wrinkle Black finish not only enhances the engine bay aesthetics but also resolves expansion tank issues with its solid build and built-in mount. Say goodbye to concerns about separating and leaking plastic expansion tanks. Pair it with the Canton Racing 77-272 MINI power steering tank for a perfect combination.

• Features a billet radiator-style neck
• Accepts Canton Racing pressure cap or any 30 psi radiator-style cap
• Enhances engine bay aesthetics with Powdercoated Wrinkle Black finish
• Resolves expansion tank issues with solid build and built-in mount
• Eliminates worries about separating and leaking plastic tanks
• Perfect complement to Canton Racing 77-272 MINI power steering tank

MINI R50 to R53 Expansion Tank / Power Steering Tank - Wrinkle Black Aluminum is a high-quality solution designed to address both coolant expansion and power steering needs in one kit. This kit includes a billet-style expansion tank with a radiator neck that accepts the Canton Racing part #81-030 pressure cap or any 30 psi radiator cap, ensuring a secure and leak-proof seal.

Key benefits of the MINI R50 to R53 Expansion Tank / Power Steering Tank - Wrinkle Black Aluminum include:

• Dual Functionality: Combines both expansion tank and power steering tank into a single, convenient kit.
• Durable Construction: Made from aluminum with a wrinkle black finish, providing long-lasting performance and a sleek appearance.
• Enhanced Sealing: Features a billet radiator-style neck that fits standard 30 psi radiator caps, preventing leaks and ensuring reliable operation.
• Reliable Design: Eliminates the issues associated with plastic tanks, such as separation and leakage.
• Complete Kit: Includes a black expansion tank, black power steering tank, and a Stant cap for easy installation.