Find Parts That Fit Your Vehicle

BMW Control Arm Replacements & Upgrades

Control arms, and their integrated ball joints, are some of the most crucial components on a BMW suspension. The control arms literally control the wheel and suspension as they go through their range of motions. They do more than just keep the alignment in a constant spec - they are a vital locating component for the suspension itself. A faulty or worn control arm or ball joint is a very dangerous and potentially life-threatening problem so make sure they are inspected and replaced at regular intervals.

Most control arms for BMWs consist of an inner and outer ball joint made of plastic, rubber, Delrin, or metal and covered in grease with a rubber boot to seal it from the outside. The ball joint rotates and spins as the control arm goes through its movements and that will wear the ball joint and make it loose. The grease inside the housing can also get used up, evaporate, or become contaminated from moisture and foreign particles. As the ball joint becomes worn it can result in excess movement within the housing. Your steering and handling will become less precise and there is usually a light clunking or clicking sound. In rare and extreme cases the ball joint can separate from the control arm completely, leading to a total loss of suspension and steering control. You should have the ball joint play checked annually and replace them every 3-4 years. Most track organizations will not allow a car if they are older than three years.

Control arms also take abuse from impacts and handling forces. Aluminum control arms will generally bend and prevent an accurate alignment. Steel control arms will crack and fracture and require close inspection annually and replacement every 3-4 years.

We sell OE BMW, OEM, and performance upgrade control arms from proven manufacturers. The control arm is so important to a BMW suspension that we insist on only top quality brands and designs and will never sell a control arm based on price alone. We also have upgrade packages with superior designs and better bushing options and we have bundled these together with valuable package savings.

Sub-Categories

Sort By:

Upper Control Arm with Bushing - Right
10X Entries Into Our F80 M3 Sweepstakes
Bavarian Autosport - Corporate Logo
T#:579752
Part#: 51569
In Stock
Sale - Save 20% $ 59.99

This product was last offered at the strikethrough price on
10-28-2026

$ 47.99 USD
Free Shipping on orders $49 and up
Sale - Save 20%
$ 59.99

This product was last offered at the strikethrough price on
10-28-2026

$ 47.99 USD
Free Shipping on orders $49 and up
Control arm with factory bushing for easy installation! If your control arm bushing is bad, it's worth buying this entire unit to save yourself time and money down the road.
Enthusiast Bundles - Corporate Logo
T#:25042499
Part#: 029305ECS01EBKT
In Stock
$ 1,121.65 USD
$ 1,121.65 USD

Elevate the performance of your E36 M3 with the ECS Tuning Performance Coilover System. This sport-tuned suspension offers adjustable height, damping, and body settings, providing substantial performance benefits. Crafted with high-quality materials and coatings, it replaces worn suspension components while achieving the ideal ride height.

  • Spring Rates: Front 6kg/mm, Rear 8kg/mm
  • Performance Features:
    • 32 levels of rebound damping adjustment
    • Monotube shocks/struts with optimized progressive rate coil springs for road-sticking grip
    • Lowered ride height improves handling performance
    • Adjustable front bodies for personalized ride height and correct spring pre-load
  • Product Design:
    • Durable gloss black powder coat on strut and shock bodies
    • Clear zinc-coated threaded portions for corrosion protection
    • Reflex Silver Metallic finish on powder-coated coil springs
    • Red anodized billet aluminum lower spring seats with locking collars
    • Integrated bump stops

Revitalize your E30/E36 with the FCAB and pre-installed monoball upgrade. This front control arm bushing replacement offers precise, predictable handling without the harshness of solid bushings. Greaseable and serviceable, it enhances performance without sacrificing daily driving comfort.

  • Stock vs. Upgrade:
    • Stock rubber bushings designed for comfort, not optimal performance
    • Poly and delrin bushings compromise handling and wear prematurely
  • Turner Front Control Arm Spherical Bearings:
    • Greaseable spherical bearing for improved precision and durability
    • 6061-T6 anodized housing with needle grease zerk for easy maintenance
    • Precision CNC machined Delrin arm adapter for a tight fit
  • Performance Benefits:
    • Instant, crisp steering and braking response
    • Easy maintenance with long-lasting performance
    • Improved road feel without undesirable NVH

Ensure optimal performance with Turner's Front Control Arm Spherical Bearings – a must-have for track enthusiasts and a great upgrade for spirited driving on the streets.

Show More Show Less
Enthusiast Bundles - Corporate Logo
T#:37419754
Part#: 051056LAEBKT
In Stock
$ 560.32 USD
Free Shipping on orders $49 and up

ECS E90 xDrive Lowering Spring Set Transform your E90’s handling and stance with our specially designed ECS Lowering Springs. Built to enhance both cornering capability and ride comfort, these springs provide a balanced drop between 1.0"-1.3", giving your vehicle a sportier profile while keeping a smooth, OEM-like ride. Experience a lower center of gravity for improved stability, enhanced steering feedback, and a sleek look that reduces unsightly wheel gap for a true performance appearance.

Why Choose ECS Lowering Springs?

Better Handling and Stability: By lowering the center of gravity, these springs reduce body roll and improve road grip, delivering precise control through corners. Performance-Driven Design: Linear spring rates tuned for sporty responsiveness without sacrificing comfort, making them ideal for daily driving. Durability You Can Trust: Finished with a flat black powder coating for excellent corrosion resistance, so they look great and last. Specifications

Lowering Range: Front 1.0"-1.2", Rear 1.2"-1.3" Spring Rate: Front 505 lbs/in, Rear 854 lbs/in Ideal for Daily Drivers and Enthusiasts: With rates slightly above factory specs, ECS Lowering Springs provide improved handling without the harshness typical of coilovers, making them perfect for drivers seeking a more refined, performance-focused setup. Take it a step further by adding wheel spacers to achieve the ultimate stance—browse our wide selection of options for the E90 xDrive to complete your suspension overhaul!

ECS Performance Rear Trailing Arm Set Say goodbye to suspension flex and unwanted geometry changes under load with our Performance Rear Trailing Arms, an upgrade engineered to enhance strength and handling precision. Factory steel trailing arms can flex and even fail under harsh conditions, but these trailing arms are built to stand the test of time. Lightweight, rigid, and built from solid 6061-T6 aluminum, these trailing arms offer improved stability and peace of mind, no matter how demanding the road.

Why Upgrade to ECS Rear Trailing Arms?

Engineered for Strength: Constructed from high-grade 6061-T6 aluminum, anodized for corrosion resistance, these arms are designed to last longer and handle tougher conditions than OEM steel arms. Lightweight and Strong: Each arm is 25% lighter than stock, weighing 384 grams versus the factory 517 grams, reducing unsprung weight for better performance. Easy DIY Installation: Designed to fit seamlessly, these trailing arms won’t alter alignment settings, making them a straightforward upgrade for enthusiasts and home mechanics alike. Enhanced Handling: With virtually no flex, they eliminate unwanted suspension changes, providing a smoother, more controlled ride. Kit Includes

Lowering Spring Set: Front and rear springs with precise lowering specs and premium powder coating. Rear Trailing Arms: A set of solid 6061-T6 aluminum trailing arms, ready for direct replacement, along with all necessary hardware. Bolt Torque Spec: 74 ft-lbs

Show More Show Less

Enthusiast Bundles - Corporate Logo
T#:25042497
Part#: 029308ECS01EBKT
Back Ordered
$ 1,234.70 USD
$ 1,234.70 USD

Elevate your E46 M3 driving experience with the ECS Tuning Performance Coilover System. Crafted with daily drivers in mind, these coilovers seamlessly blend enhanced performance, aggressive aesthetics, and comfort, offering a smooth ride comparable to stock setups. Unleash the full potential of your BMW's suspension with top-tier coilovers at a fraction of the cost.

Key Features:

  • Performance Coilover System:
    • Sport-tuned, height, damping, and body adjustable suspension
    • High-quality materials and coatings for optimal performance
    • Perfect ride height for a dynamic appearance
    • Spring Rates: Front 12kg/mm, Rear 10kg/mm

Performance Features:

  • 32 levels of rebound damping adjustment
  • Monotube shocks/struts with progressive rate coil springs for road-sticking grip
  • Lowered ride height improves handling with a lower center of gravity
  • Adjustable front bodies maintain ride height and correct spring pre-load
  • Adjustable front and rear bodies ensure the shock operates in the correct valving range, regardless of ride height

Product Design:

  • Durable gloss black powder-coated strut and shock bodies
  • Clear zinc-coated threaded portions for optimum corrosion protection
  • Reflex Silver Metallic powder-coated coil springs for durability
  • Red anodized, billet aluminum lower spring seats with locking collars for on-the-car adjustability
  • Integrated bump stops for added protection

Upgrade further with the Turner Motorsport Control Arm Monoball Upgrade with housings (FCAB) for unparalleled handling and braking performance.

Key Features:

  • Bearing:
    • Extremely robust, greaseable, double lip sealed spherical bearing (Rated for 20,000lbf Dynamic, 90,000lbf Static)
  • Housing:
    • 6061-T6, anodized housing with needle grease zerk for easy maintenance
    • In-house designed knurled OD for a perfect fit across housing diameters
  • Bearing Insert Arm Adapter:
    • Precision CNC machined Delrin, ensuring a tight fit between the bearing and the control arm
  • Performance:
    • Instant, crisp steering and braking response
    • Easy maintenance with long-lasting performance
    • Improved road feel without undesirable NVH
    • Grease before installation and with each oil service using high-quality Moly grease for maximum service life. Grease fitting tool - ES#3410138 or complete kit - ES#3411244.

Transform your E46 M3 into a track-ready machine while maintaining street-ability for the spirited enthusiast.

Show More Show Less

Genuine BMW Motorsport - Corporate Logo
T#:338369
Part#: 33327749778
Ships on Dec 4, 2026
Starting at $ 198.94 USD
Free Shipping
Starting at $ 198.94 USD
Free Shipping
Designed and built in-house at BMW Motorsport, these are stock rear camber arms from the E36 M3 that have been strengthened by welding a reinforment in between the wishbones. Stiffer than the stock units and still adjustable for camber. This arm is legal in many racing classes where an aftermarket arm is not permitted. Sold individually, two required per car.

For maximum adjustment solid aluminum camber arms, you may also want to check out our TMS E36/E46 Adjustable Rear Camber Arms .

This arm does not include a bushing, but you may choose add a bushing using the drop down below. For an additional charge, you can get the bushing pre-pressed into the arm, so it is ready to install on the car (no added shop time or hydraulic press required).

Sold Individually.
Show More Show Less
Upper Control Arm Ball Joint - E53
10X Entries Into Our F80 M3 Sweepstakes
Bavarian Autosport - Corporate Logo
T#:579797
Part#: 52322
Special Order: No Guaranteed ETA
$ 25.59 USD
Free Shipping on orders $49 and up
Mounting bolts sold separately. Two required per ball joint.