Find Parts That Fit Your Vehicle

BMW Suspension Bushings & Mounts

Suspension mounts are designed to absorb the energy of the shocks and springs and isolate road harshness from the chassis. But over time the original rubber mounts will crumble and fail. We have stock mounts and bushings as well as a wide selection of upgraded and heavier-duty for performance street cars. We also offer a full selection of race only bushings and mounts. Simply choose your car below. Included here you will find rear shock tower mounts, front strut mounts, subframe mounts, lower control arm bushings, rear trailing arm bushings, and more.

Sub-Categories

Sort By:

IRP - Individual Racing Parts - Corporate Logo
T#:401369
Part#: IRPRTM-P
In Stock
$ 110.00 USD
Free Shipping
$ 110.00 USD
Free Shipping

Looking to stiffen up your rear shock mount without going for a solid rear mount? The Polyurethane Rear Performance Strut Mount from IRP will give you the stiffer reinforcement without giving you the typical noise, vibration, and harshness that come with traditional performance strut mounts. The polyurethane also helps with preventing rear shock blowouts, a common problem for stock BMW rear mounts that are paired with stiffer than stock suspension. 

The bearing sleeve and poly bushing are built to work with all stock style shocks such as Bilstein and H&R coilover and suspension kits.

Fits the following BMW chassis:
E36 BMW All Submodels except for 318ti
E46 BMW All Submodels
E30 BMW All Submodels
E36 Z3 BMW All Submodels
E85/E86 Z4 BMW All Submodels

Show More Show Less
IRP - Individual Racing Parts - Corporate Logo
T#:587022
Part#: IRPRSM-90B
In Stock
$ 195.00 USD
Free Shipping
$ 195.00 USD
Free Shipping
The stock rubber lower shock mounts tend to fail prematurely, especially when subjected to rough track conditions. These IRP lower shock mounts utilize a monoball design that is significantly stronger and helps to eliminate deflection that is caused by soft rubber. Key Benefits: Monoball rear lower shock mount eliminates unwanted deflection, maximizing shock efficiency and performance. Allows full shock body articulation for low friction movement and reduced side loading and improved shock wear. Designed to work with stock non-M taper seat stud style shocks (not M eyelet mount type). Maintains OE shock position
Show More Show Less
SuperPro - Corporate Logo
T#:385202
Part#: SPF3953K
In Stock at Vendor
$ 119.99 USD
Free Shipping
$ 119.99 USD
Free Shipping
While your stock bushings do a great job of insulating the cabin from a rough ride, they do little to improve road feel, and can cause slop in the suspension, allowing for unwanted movement – especially after they wear out. These SuperPro suspension bushings do a great job of locating your suspension components and helping you to feel more connected to the driving experience, while more efficiently managing the movement of your suspension. SuperPro has been manufacturing suspension components and bushings since 1983, and has always been at the forefront of polyurethane technology. SuperPro bushings are not merely polyurethane copies of your stock bushings – they are specifically developed to play to the strengths of their special blend of polyurethane and tested extensively to ensure that they are simply the highest performing components available. Due to this commitment to quality and performance, you can expect consistent quality, superior fitment, and a minimal increase in noise, vibration, & harshness (NVH).
Show More Show Less

Genuine BMW Motorsport - Corporate Logo
T#:12076
Part#: E9X-GPN-SUBFRAME
In Stock
$ 800.00 USD
Free Shipping
$ 800.00 USD
Free Shipping
The E82 and E90/E92 subframes have an inherent weakness in the rear subframe - the mounts are too soft for the power and torque these cars are capable of. The subframe is the heart of a BMW's rear suspension. As torque is transmitted through the differential and axles and as the tires grip the road, the subframe mounts are working to keeping everything in line. That's a tough task to hold when torque is increased with bigger boost (335i) or even mild tweaks (M3). While the M3 subframe mounts are a great upgrade for the non-M chassis these factory BMW Motorsport subframe mounts go one step further.

These Motorsport/Group N rear subframe bushings are a direct replacement upgrade over the stock mounts. They are rubber to conform to the rules of the Group N racing class - so they are still acceptable for street use as long as extra ride harshness can be tolerated. The rear subframe has to come down from the car for these mounts to be pressed in. So now is the perfect time to do other work as well - check out our other Motorsport Race bushings or M3 upgrades.

Price is for the set of 4 mounts.

This item fits the following BMWs:
2008-2012 E82 BMW 128i 135i 1M Coupe
2006-2011 E90 BMW 325i 325xi 328i 328xi 328i xDrive 330i 330xi 335d 335i 335xi 335i xDrive M3 - Sedan
2006-2012 E91 BMW 325xi 328i 328xi 328i xDrive - Wagon
2007-2013 E92 BMW 328i 328xi 328i xDrive 335i 335is 335xi 335i xDrive M3 - Coupe
2007-2013 E93 BMW 328i 335i M3 - Convertible
Show More Show Less

SuperPro - Corporate Logo
T#:26904910
Part#: SPF4314K
Ships in 2 Business Days
$ 147.99 USD
Free Shipping on orders $49 and up
Control arm bushes stabilize the movement of the arms to ensure the correct geometry is maintained in all situations. Worn or rubber bushes in these locations lead to dynamic changes in wheel alignment that affect the handling of a vehicle as well as the tire life. SuperPro Bushings solve this issue and are the perfect repair or repair upgrade solution.
Show More Show Less
SuperPro - Corporate Logo
T#:26904908
Part#: SPF4313K
Ships in 2 Business Days
$ 114.99 USD
Free Shipping on orders $49 and up
Control arm bushings form the vital pivot and link between all core suspension components. Worn bushings allow significant deflection and movement leading to slower responses, a sloppy drive, irregular and excessive tire wear and diminish every facet of the way your vehicle drives. The wear is accelerated and the impact of worn bushings is even greater in vehicles with larger and or grippier tire packages and larger or heavier wheels, upgraded brakes, etc.. SuperPro's polyurethane bushings are the culmination of nearly 5 decades of suspension expertise and development in Australia's harshest terrain. Designed with durability as a paramount feature we also bring ride and passenger comfort and cabin isolation to the forefront of our development. Your vehicle should treat you as well on the way to and from the track as it performs on your daily commute. Our designs and material compositions retain OEM levels of noise and harshness isolation while delivering superior performance and road manners in all conditions.
Show More Show Less

SuperPro - Corporate Logo
T#:385204
Part#: SPF3954K
Back Ordered
$ 129.99 USD
Free Shipping
$ 129.99 USD
Free Shipping
While your stock bushings do a great job of insulating the cabin from a rough ride, they do little to improve road feel, and can cause slop in the suspension, allowing for unwanted movement – especially after they wear out. These SuperPro suspension bushings do a great job of locating your suspension components and helping you to feel more connected to the driving experience, while more efficiently managing the movement of your suspension. SuperPro has been manufacturing suspension components and bushings since 1983, and has always been at the forefront of polyurethane technology. SuperPro bushings are not merely polyurethane copies of your stock bushings – they are specifically developed to play to the strengths of their special blend of polyurethane and tested extensively to ensure that they are simply the highest performing components available. Due to this commitment to quality and performance, you can expect consistent quality, superior fitment, and a minimal increase in noise, vibration, & harshness (NVH).
Show More Show Less
SuperPro - Corporate Logo
T#:385213
Part#: SPF4328K
Ships in 3 Business Days
$ 164.99 USD
$ 164.99 USD

BMW E46 Z4 Subframe Mount Bushing Kit enhances the connection between your vehicle's differential and chassis, offering improved road feel and reducing driveline slop. Turner Motorsport’s SuperPro subframe bushings are designed to replace the stock bushings, which may become worn over time and fail to provide adequate performance.

  • Improved Road Feel: Enhances driving experience by providing better connection to the road.
  • Reduced Driveline Slop: Minimizes unwanted movement and improves power transfer to the wheels.
  • Durable Construction: Made from high-quality polyurethane, offering superior performance over stock bushings.
  • Minimal NVH Increase: Delivers performance improvements with a slight increase in noise, vibration, and harshness.
  • Precision Engineering: Designed specifically for the BMW E46 and Z4 models to ensure perfect fitment and consistent quality.
  • Proven Performance: Developed by SuperPro, a leader in polyurethane technology since 1983.
Show More Show Less

SuperPro - Corporate Logo
T#:385206
Part#: SPF3955K
Ships in 2 Business Days
$ 129.99 USD
Free Shipping
$ 129.99 USD
Free Shipping
While your stock bushings do a great job of insulating the cabin from a rough ride, they do little to improve road feel, and can cause slop in the suspension, allowing for unwanted movement – especially after they wear out. These SuperPro suspension bushings do a great job of locating your suspension components and helping you to feel more connected to the driving experience, while more efficiently managing the movement of your suspension. SuperPro has been manufacturing suspension components and bushings since 1983, and has always been at the forefront of polyurethane technology. SuperPro bushings are not merely polyurethane copies of your stock bushings – they are specifically developed to play to the strengths of their special blend of polyurethane and tested extensively to ensure that they are simply the highest performing components available. Due to this commitment to quality and performance, you can expect consistent quality, superior fitment, and a minimal increase in noise, vibration, & harshness (NVH).
Show More Show Less

Genuine BMW Motorsport - Corporate Logo
T#:2309
Part#: E9X-GPN-UCAB
Ships in 6 Business Days
$ 413.38 USD
Free Shipping
$ 413.38 USD
Free Shipping
These are the factory BMW Motorsport Group N high performance front upper control arm bushings. These heavy duty rubber bushings are stiffer than the stock bushings to improve steering feel and improve handling. They are great for track use - and Grand Am Cup legal! - yet can also be used on a street driven car - please note these will not be as compliant as the stock rubber bushings. These are for the control arm with the ball joint pointing down, sometimes referred to as the thrust arm or tension strut.

Price is for the pair of bushings.

This item fits the following BMWs:
2008-2012 E82 BMW 128i 135i 1M
2006-2011 E90 BMW 325i 328i 330i 335d 335i M3 - Sedan
2006-2011 E91 BMW 328i - Wagon
2007-2012 E92 BMW 328i 335i 335is M3 - Coupe
2007-2012 E93 BMW 328i 335i M3 - Convertible
Show More Show Less
IRP - Individual Racing Parts - Corporate Logo
T#:2408498
Part#: IRPRSB-9XMB2
Special Order: No Guaranteed ETA
$ 176.99 USD
Free Shipping
$ 176.99 USD
Free Shipping
Enhance road feel and keep your vehicle more planted with these upgraded aluminum bushings. Less play allows for more precise suspension articulation, making for a better performance driving experience.
Show More Show Less
IRP - Individual Racing Parts - Corporate Logo
T#:401368
Part#: IRPRTM-B
Special Order: No Guaranteed ETA
$ 185.99 USD
Free Shipping
$ 185.99 USD
Free Shipping

Want the best performance option in shock tower mounts? IRP has created their pillow-ball rear shock mounts for just this need. These rear shock mounts are designed for use on the track and racing. This set of mounts will help your rear shocks perform the best they can in all conditions. The advantage to using a mount with spherical bearing is that it allows the shock to freely move off axis without side loading the shock shaft like rubber or polyurethane mounts do. Side loading a shock increases stiction and wear which decreases its efficiency. Because these are mounts without an isolator (rubber or polyurethane) to dampen road noise and vibrations we do not recommend them for street cars.

The bearing sleeve and poly bushing are built to work with all stock style shocks such as Bilstein and H&R coilover and suspension kits.

Fits the following BMW chassis:
E36 BMW All Submodels except for 318ti
E46 BMW All Submodels
E30 BMW All Submodels
E36 Z3 BMW All Submodels
E85/E86 Z4 BMW All Submodels

Show More Show Less


IRP - Individual Racing Parts - Corporate Logo
T#:2408491
Part#: IRPRSB-90PU
In Stock
$ 175.00 USD
Free Shipping on orders $49 and up
Replacing your worn stock rubber subframe bushings with IRP's polyurethane bushing set will transform the way your car drives. Stiffer than stock, these bushings still absorb NVH which allows them to be comfortably used on the street without heavily reducing ride quality.
Show More Show Less
SuperPro - Corporate Logo
T#:54388372
Part#: SPF227622.5K
Ships in 3 Business Days
New Item
$ 33.99 USD
Free Shipping on orders $49 and up
Polyurethane bushings drastically reduce bar deflection, keeping your vehicle flatter through every turn.
SuperPro - Corporate Logo
T#:54388375
Part#: SPF447480K
Ships in 3 Business Days
New Item
$ 119.99 USD
Free Shipping on orders $49 and up
Mounts to the rear LCAB bracket, connecting the lower control arm to the body and subframe.

SuperPro - Corporate Logo
T#:26904907
Part#: SPF4310K
Back Ordered
$ 173.99 USD
Free Shipping on orders $49 and up
Control arm bushings stabilize the movement of the arms to ensure the correct geometry is maintained in all situations. Worn or rubber bushes in these locations lead to dynamic changes in wheel alignment that affect the handling of a vehicle as well as the tire life. SuperPro Bushings solve this issue and are the perfect repair or repair upgrade solution.
Show More Show Less

Vargas Front Bushing Insert Kit - BMW G42 2
2X Entries Into Our F80 M3 Sweepstakes
Vargas Turbo Technologies - Corporate Logo
T#:51672719
Part#: VTT-A9X-G42-FRON
Ships in 10 Business Days
New Item
$ 262.99 USD
Free Shipping
$ 262.99 USD
Free Shipping
The VTT Front Bushing Insert Kit is the definitive solution for owners looking to eliminate the "slop" in their drivetrain.
Vargas Turbo Technologies - Corporate Logo
T#:51672721
Part#: VTT-X3M-RIFS
Ships in 10 Business Days
New Item
$ 53.99 USD
Free Shipping
$ 53.99 USD
Free Shipping
The VTT Street Series Rear Bushing Inserts are the perfect "OEM Plus" upgrade for the F97/F98 chassis.

Genuine BMW Motorsport - Corporate Logo
T#:12075
Part#: E9X-GPN-TOE
Ships on Nov 11, 2026
$ 279.99 USD
Free Shipping
$ 279.99 USD
Free Shipping
These BMW Motorsport Group N Bushings replace all of the bushings on the factory toe control arm (also known as the track strut). These inner and outer bushings feature a heavy duty rubber that is stiffer than stock. The stiffer bushing reduces deflection and twist in the arm, leading to more stable handling and faster response in the suspension. These bushings are great for track use and legal for some racing classes yet can also be used on a street driven car where extra ride harshness can be tolerated.

Sold as a set of 4 - two bushings for each toe arm.

This item fits the following BMWs:
2008-2012 E82 BMW 128i 135i
2006-2011 E90 BMW 325i 325xi 328i 328xi 328i xDrive 330i 330xi 335d 335i 335xi 335i xDrive - Sedan
2006-2012 E91 BMW 325xi 328i 328xi 328i xDrive - Wagon
2007-2013 E92 BMW 328i 328xi 328i xDrive 335i 335is 335xi 335i xDrive - Coupe
2007-2013 E93 BMW 328i 335i - Convertible
Show More Show Less
Genuine BMW Motorsport - Corporate Logo
T#:3093
Part#: E9X-GPN-FOLB
Ships on Nov 11, 2026
$ 519.80 USD
Free Shipping
$ 519.80 USD
Free Shipping
These are BMW Motorsport Group N Rear Outer bushings for the Guide Rod and Upper Link (Wishbone). This is a heavy-duty rubber that is stiffer than stock to resist deflection and twist in the arm. You'll have more stable handling and faster response in the suspension. These bushings are great for track use and legal for some racing classes yet can also be used on a street driven car where extra ride harshness can be tolerated.

Sold as a set of 4 -
2 Upper Link Outer Bushings,
2 Guide Rod Outer Bushings

This item fits the following BMWs:
2008-2012 E82 BMW 128i 135i
2006-2011 E90 BMW 325i 325xi 328i 328xi 328i xDrive 330i 330xi 335d 335i 335xi 335i xDrive - Sedan
2006-2012 E91 BMW 325xi 328i 328xi 328i xDrive - Wagon
2007-2013 E92 BMW 328i 328xi 328i xDrive 335i 335is 335xi 335i xDrive - Coupe
2007-2013 E93 BMW 328i 335i - Convertible
Show More Show Less

IRP - Individual Racing Parts - Corporate Logo
T#:2408474
Part#: IRPRSB-90AL
Special Order: No Guaranteed ETA
$ 319.99 USD
Free Shipping on orders $49 and up
Aluminum subframe bushings prevent your subframe from shifting around as the chassis bends under load, unlike the stock rubber bushings. With only a slight increase in NVH, these aluminum bushings from IRP will keep the rear end of your BMW substantially more planted.
Show More Show Less

IRP - Individual Racing Parts - Corporate Logo
T#:2408494
Part#: IRPRSB-90MAL
Special Order: No Guaranteed ETA
$ 294.99 USD
Free Shipping on orders $49 and up
Aluminum subframe bushings prevent your subframe from shifting around as the chassis bends under load, unlike the stock rubber bushings. With only a slight increase in NVH, these aluminum bushings from IRP will keep the rear end of your BMW substantially more planted.
Show More Show Less
SuperPro - Corporate Logo
T#:26904906
Part#: SPF4308K
Back Ordered
$ 162.99 USD
Free Shipping on orders $49 and up
Control arm bushings stabilize the movement of the arms to ensure the correct geometry is maintained in all situations. Worn or rubber bushes in these locations lead to dynamic changes in wheel alignment that affect the handling of a vehicle as well as the tire life. SuperPro Bushings solve this issue and are the perfect repair or repair upgrade solution.
Show More Show Less