Find Parts That Fit Your Vehicle

Fuel Pump

BMW fuel pumps run at a very high pressure in order to properly supply the injectors with fuel. A failed pump will allow the car to crank, but wont kick over. Turner Motorsports carries Genuine BMW pumps that will have you back on the road in no time.
Sort By:

Fuel-It! - Corporate Logo
T#:403509
Part#: BMW-S1LPFP-CK
Ships in 2 Business Days
$ 199.99 USD
Free Shipping
$ 199.99 USD
Free Shipping
This is the complete upgrade kit that also includes the Walbro 255LPH GSL392 pump, comes fully assembled, and ready to install with your stock LPFP.
PFS - Corporate Logo
T#:590135
Part#: E90BUCKETSTKSS
Ships on Aug 28, 2026
$ 551.99 USD
Free Shipping
$ 551.99 USD
Free Shipping
Radium Engineering - Corporate Logo
T#:31059457
Part#: 20-1440
In Stock
$ 549.99 USD
Free Shipping
$ 549.99 USD
Free Shipping

PFS - Corporate Logo
T#:9158318
Part#: A90/91B58LPLP
Ships on Aug 28, 2026
$ 1,468.99 USD
Free Shipping
$ 1,468.99 USD
Free Shipping
A true drop-in 800-1000WHP+ capable LPFP for A90/91 Toyota Supras. This LPFP needs NO additional pumps, wiring harnesses, etc etc. It will support up to 800WHP on Ethanol percentages as high as E98 and will support much higher power levels with less E content as long as you have the octane to support it.
Show More Show Less

PFS - Corporate Logo
T#:590122
Part#: PFS-E9X-BCKTLSSE
Back Ordered
$ 609.99 USD
Free Shipping
$ 609.99 USD
Free Shipping
Looking to make 700WHP+ on your N54 powered vehicle, need the fuel to do to so, and don’t want to spend a ton of money? Look no further than the PFS bucketless fuel “External Series” pump upgrade! The external series takes our already best on the market bucketless design and adds a 3/8 Quick Disconnect bulkhead fitting to the top hat which allows you to run the secondary pump independent of the factory lines. This allows FULL FLOW from the second pump unhindered by the factory jet pump, siphon, fuel filter, or Fuel pressure regulator. All PFS “External Series” Bucketless pumps include the following: A complete plug and play solution by simply getting rid of your factory bucket Two New E85 compatible Walbro 450 F9000274 pumps Two new Walbro filters (Hydra-Mat available in options) Wiring Harness for the secondary pump with Fused power Hobbs Switch Fuel pump relay 3/8 QD fitting on the Passenger side top hat -6 Fuel line from Passenger side tank to the front of the vehicle -6 Fuel line from Driver side tank to the front of the vehicle PFS 10 micron filter with choice of outlet fittings Flow testing on the PFS test bench prior to shipping
Show More Show Less
Fuel-It! - Corporate Logo
T#:403295
Part#: FILPFPK5
Back Ordered
Sale - Save 2% $ 649.99

This product was last offered at the strikethrough price on
05-03-2026

Starting at $ 634.84 USD
Free Shipping
Sale - Save 2%
$ 649.99

This product was last offered at the strikethrough price on
05-03-2026

Starting at $ 634.84 USD
Free Shipping
This is a complete Low Pressure Fuel Pump (LPFP) upgrade that replaces your weak stock LPFP assembly with a high-flow E85-certified one. Standard Kit Includes: A brand new OEM LPFP bucket that is upgraded with a new Walbro 450 or 525 pump and filter. A new E85 compatible Walbro 450 pump (F90000274) that flows 50% more fuel than stock Optional A new E85 compatible Walbro 525 pump (F90000285) that flows 65% more fuel than stock NOTE: Owners with I-Drive may get a Fuel pump warning on the screen that says "Continued driving is possible. Have the system checked by your BMW center as soon as possible." As long as the car is running fine and does not exhibit any other symptoms, there is not an issue with the pump and this can be ignored. If you have any questions about this please feel free to contact us. Upgraded pumps pull more current, so if your EKP (LPFP control module) is weak, it may overheat causing it to shut down and need to be replaced. If this is a concern for you check out our Stage 3 fuel pump upgrade kits that retain the stock LPFP and add a secondary pump.
Show More Show Less

Fuel-It! - Corporate Logo
T#:403273
Part#: FILPFPK2
Back Ordered
Sale - Save 2% $ 699.99

This product was last offered at the strikethrough price on
05-03-2026

Starting at $ 684.84 USD
Free Shipping
Sale - Save 2%
$ 699.99

This product was last offered at the strikethrough price on
05-03-2026

Starting at $ 684.84 USD
Free Shipping
*NORTH AMERICAN VEHICLES ONLY* If your current Low-Pressure Fuel Pump (LPFP) is struggling to keep up, is old and tired, or you need an E85-compatible pump assembly, this is the upgrade for you! This is a complete Low-Pressure Fuel Pump (LPFP) upgrade that replaces your stock LPFP assembly with a new E85-certified one. The new Walbro 450 pump provides approximately 100% more flow than stock and this assembly can be purchased one of three ways to meet your needs. All three options include the following: A complete plug-and-play solution by simply replacing your stock bucket A new E85-compatible Walbro 450 pump A new Walbro filter A custom fitting that is tuned to optimize the venturi and pump output Spare vent tube clip Flow testing prior to shipping
Show More Show Less
Fuel-It! - Corporate Logo
T#:403475
Part#: E89S2LPFP
Back Ordered
Starting at $ 820.00 USD
Free Shipping
Starting at $ 820.00 USD
Free Shipping

This is a complete Low-Pressure Fuel Pump (LPFP) upgrade that replaces your stock LPFP assembly with a new E85 certified one.  The new Walbro 450 pump provides approximately 100% more flow than stock and this assembly can be purchased one of three ways to meet your needs.

  • Trade-in:
    • This option allows you to receive a rebuilt/upgraded stock bucket with a new Walbro 450 pump, filter, and fittings to swap out your stock LPFP assembly.  A $150 core deposit is included in the price that will be refunded when we receive your *stock bucket.
  • New Build:
    • This option includes a new LPFP bucket that is upgraded with a new Walbro 450 pump, filter, and fittings.  No core deposit is required but you are eligible for a core refund of $50 should you elect to return your *stock bucket.

Both options include the following:

  • A complete plug and play solution by simply replacing your stock bucket
  • A new E85 compatible Walbro 450 pump
  • A new Walbro filter
  • A custom fitting that is tuned to optimize the venturi and pump output
  • Spare vent tube clip
  • Flow testing prior to shipping
  • Recommended accessories:
    • Lock Ring Removal Tool 

 To be eligible for a core return, the bucket must be completely stock and undamaged. (Pump itself does not have to be functioning) 

+ International customers:  Due to different emissions requirements, the top portion of your fuel bucket (top hat) is different and doesn't have a large vent tube connection.  For this reason, we are no longer sending the top hat to international customers as this often causes confusion.  Those customers will simply re-use their current top hat when installing their Stage 2 pump.

- All Stage 2 assemblies are stock buckets that have been rebuilt and may show signs of being disassembled and rebuilt.  They are all flow tested and verified before being shipped.

Show More Show Less

PFS - Corporate Logo
T#:51778140
Part#: PFS-POD-HPFP-UPG
Ships on Aug 28, 2026
New Item
$ 1,154.99 USD
Free Shipping
$ 1,154.99 USD
Free Shipping
This Planetary OverDrive system allows you to stick with your factory BMW high-pressure fuel pump while unlocking the flow needed for big-turbo builds.

PFS - Corporate Logo
T#:590134
Part#: E90BUCKETSTKDS
Back Ordered
$ 699.00 USD
Free Shipping
$ 699.00 USD
Free Shipping