The ECS Strut Tower Bar Kit in striking wrinkle black finish goes beyond aesthetics - it offers essential functionality. This kit significantly reduces chassis flex, contributing to a stiffer suspension setup. Moreover, it plays a crucial role in triangulating the front end, resulting in more consistent suspension geometry that enhances your vehicle's performance.

It's essential to ensure that the strut tower plates sit flush against the strut towers. Any misalignment may indicate minor deformations in your strut towers. However, this can be easily addressed using a block of wood and a hammer to reinstate the ideal alignment.

If you are concerned about strut tower mushrooming and looking for improved handling, the M7 Strut Tower Brace (STB) is the solution. This is the ONLY strut tower brace on the market that features anti-mushrooming technology.

Repeatedly, we've heard the same complaint: strut towers mushroom after heavy impacts from shocks and low aspect ratio tires. Initially, the shock towers take on a barely visible convex shape, but if compared to the original sheet metal, you'll find the horizontal plane has moved as much as 3/8" upwards, making alignment nearly impossible.

This issue often shows up as a slight pull to the left or right, depending on which strut tower is affected. The M7 Strut Tower Brace's end mounting plates solve this problem by sandwiching the sheet metal and shock top plate, creating a reinforced surface that won't bend, even during hard impacts.

The M7 STB features 1/2" (13mm) thick end plates that add extra strength to the strut towers, preventing mushrooming and potentially costly repairs. The cross brace significantly improves handling by adding torsional stiffness to the front body structure, helping keep your tires planted and pointed in the direction you want to go, especially during hard turns. Machined from billet aluminum and matte black powder coated, the M7 Strut Tower Brace boasts a durable black finish that looks great and won't chip or oxidize.

We have customers who won't drive their new MINI off the lot without one and dealers that sell every new MINI with either the M7 Strut Reinforcement Plates or the M7 Strut Tower Brace.

Concerned about clearance? No worries. The M7 STB profile is designed to clear both stock and aftermarket cold air intakes and ECUs. Its modular design allows easy access to the oil filter or any other accessories that might normally be blocked and require removal of the entire brace.

Installation is a snap (often taking less than 20 minutes)! No need for new nuts—the brace uses the three stock nuts on each side. Installation instructions are available online by clicking the "INSTALLATION" link on this page.

The M7 Strut Reinforcement Plates and the M7 Strut Tower Brace are two separate products that address strut tower mushrooming (you only need one or the other).

If your MINI is mainly a daily driver, the M7 Strut Reinforcement Plates are sufficient. If you have performance driving in mind, the M7 Strut Tower Brace is what you're looking for!

Please note:

• You cannot buy the SRPs and attach the cross-bar at a later time.
• The brace does not directly fit on the R50 and R52 Non-"S" Cooper due to limited hood clearance of the non-supercharged cars. It will fit but may push up on the hood slightly, requiring molding or cutting of the hood insulation after installation.
• Trimming of the underhood insulation material may be required to fully clear this brace. This is a very tight space.

M7 Tuning J-Brace for R56 MINI Coopers

Elevate your Mini's performance with the M7 Tuning J-Brace, specially designed for R56 MINI Coopers equipped with the factory John Cooper Works intake. This brace enhances front-end stiffness, protects strut towers from mushrooming, and adds a stylish touch to your vehicle.

• Improves handling and stability
• Protects strut towers from damage
• Enhances the aesthetic appeal of your Mini
• Easy installation process
• Made from high-strength 6061-T6 aluminum alloy for durability

Note: The J-Brace has been slightly modified for the 2011-2013 model year MINI Cooper S for better clearance to stock parts. This brace does not fit the base model Cooper (non 'S' model) or the JCW GP2 model.

MINI R50 R52 R53 M7 Stage I Suspension Kit

MINI R50 R52 R53 M7 Stage I Suspension Kit is the ultimate upgrade for Mini R50, R52, and R53 models seeking improved handling and performance. Engineered by M7, this Stage I Suspension Kit includes carefully selected components to enhance the driving experience of your Mini. With its premium quality construction and precise fitment, this suspension kit offers improved stability, cornering ability, and overall responsiveness.

Key Benefits:

• Enhanced handling and performance for Mini R50, R52, and R53 models
• Carefully selected components engineered by M7 for optimal performance
• Premium quality construction ensures durability and reliability
• Precise fitment for easy installation and hassle-free maintenance
• Improved stability, cornering ability, and overall responsiveness for a thrilling driving experience

Upgrade your Mini R50, R52, or R53 with the MINI R50 R52 R53 M7 Stage I Suspension Kit to elevate your driving experience to the next level. Invest in this high-quality suspension kit to unlock the full potential of your Mini.