Morimoto's XB HID bulbs set the standard in the aftermarket, offering exceptional performance and value. These bulbs are compatible with both 35W and 55W setups, delivering superior lumens, extended lifespan, longer projection, and enhanced aesthetics.

The XB D2S bulbs feature 100% Philips quartz glass with a high-quality capsule from APL-USA, using premium halide salts from German supplier Messer. This results in luminosity comparable to renowned Osram CBI bulbs at 5000K, ensuring excellent nighttime visibility.

What sets Morimoto's XB bulbs apart is their exceptional longevity. With Austrian-sourced Plansee electrodes, these bulbs maintain 83% of their intensity after 200 hours of use, compared to the Philips bulb's 86%. This level of endurance is unmatched in the aftermarket.

Morimoto's Symmetry-Structure frame ensures precise alignment of the glass capsule, guaranteeing uniform and bright HID output. These XB replacement HID bulbs meet or exceed industry-standard specifications, complying with SAE, DOT, and ECE requirements. They have been rigorously tested for compatibility with various ballasts from Morimoto, Denso, Hella, Bosch, and Koito, passing with ease.

Get your E53 Winch mount and added light bar for your winch at the same time for convenience and a better package deal! A combination of upgraded recovery gear with necessary lighting upgrade. A truly unmatched combination for your overland build!

- Winch mount -

Even the most capable off-road vehicles will get stuck sometimes. Its not about where or when you get stuck but how you recover. Our ECS winch mount will allow you to add the most important piece of recovery gear to your overlanding vehicle, a winch. Get yourself up that steep grade of hill, pull yourself out of the mud or be a recovery vehicle for other over-landers knowing you have a stout mounting system for the winch on your X5. Upgraded recovery with an awesome aesthetic!

The factory tow points on your X5 may be good enough for a flatbed tow or short distance pull but they would be no match for getting pulled out from mud or up a hill you just aren't able to conquer. Increase your overland rating with our in house engineered winch mount. Our overland winch mount utilizes the factory frame rails for an extremely sturdy mounting system and is discretely tucked away behind the factory bumper. The added structure of the winch mount includes two extremely thick recovery points that fit a standard 3/4" D ring for when you are pulling or being pulled by another vehicle in a time of need.

Features:

Standard 10"x4.5" winch mounting pattern

Recovery points are designed for standard 3/4 D rings

Fits Pre-facelift and LCI Models

Utilizes area behind the factory bumper

Mounting hardware included

- Light Bar Mount for the winch -

Lighting is a necessity when off-roading, when outfitting your X5 with a new winch and mount you will need the proper lighting system for those late nights and early mornings on the trails. Even though our winch mounting system is glorious on its own, we think it is absolutely necessary for the added light mount.

Common points for mounting aux lighting include the front bumper for long-throw lighting, the roof for high clearance/high perspective lighting, and the base of the A-pillar for ditch lighting. This front mount light bar bracket provides a clean install point for your long throw lighting needs. Fear no ditch, no dark, obstructed, or unknown path when adding a light mount to your winch!

This winch light mounting system doubles as both a utility for lighting and a rugged aesthetic upgrade. If you are looking to upgrade lighting but are not ready yet, fear not. You can start by adding this awesome light mounting system and choose your lighting option later!

Features:

Accommodates 2 large light pods or the light bar of your choosing

Direct fit on the E53 Winch Mount

Fits Pre-facelift and LCI Models

Exterior coating to match any build

Featured in the "Hidden Winch Mount for our Off-Road X5!" video on YouTube - Click Here -

Product Development:

ECS winch and light mounts were designed, engineered, tested and quality inspected by the Research and Development team in our Wadsworth, Ohio facility. ECS strives for the highest level of precision and quality through leading-edge product development technology including FARO laser scanning for reverse engineering and quality inspection, SolidWorks 3D CAD modeling and rigorous long term product testing.

The switch panel fits in your dash perfectly and features 5 switch ports with an added securing point to manage your wires nice and tidy. To make this switch panel so versatile it was designed to accept a standard rocker/toggle switch with a 1.46" x 0.83" mounting hole. Not only does ECS offer switches specific to your X5 lighting additions but they also have blank switches to control universal electronics and blank switch plates for opportunity to add later! If you want to build your own switch panel with our special made switches see T#16341854

Check out the ECS Youtube "Built by Mike" series! The E53 is a more than capable off-road/overland platform. Some of the first modifications you should make to your overlanding vehicle is lighting, you need to be able to see where you are going when venturing off the beaten path. Whether you are driving through your back yard or climbing rocks in the woods, lighting is essential! Get rid of your under utilized factory ash tray(smoking is bad anyways) and replace it with your own personalized control panel for all of your add on electronics. Lighting is crucial and with specific switches tailored to all of the E53 lighting options you have a full suite of switches to match your lighting upgrades. Dont stop at lighting this switch panel can be used for whatever type of electronics your heart desires!

Switch Panel install and operation can be seen on this "Built by Mike" video on YouTube: HERE

Features:

5 switch panel for direct E53 fitment
ABS plastic construction
Matte black to match the interior
Replaces factory ash tray with no modifications
Retains 12v outlet
Design:

The E53 switch panel idea originated from ECS engineer Mike Day when adding a full build out of lighting to his overland X5. The best ideas come from the people who are in the process of achieving a goal and find a solution to help them complete the job, but better! The switch panel was designed from a 3D scan of the E53 X5 interior and features OEM+ fitment to blend with your interior.

Check out the ECS Youtube "Built by Mike" series! The E53 is a more than capable off-road/overland platform. Some of the first modifications you should make to your overlanding vehicle is lighting, you need to be able to see where you are going when venturing off the beaten path. Whether you are driving through your back yard or climbing rocks in the woods, lighting is essential! Get rid of your under utilized factory ash tray(smoking is bad anyways) and replace it with your own personalized control panel for all of your add on electronics. Lighting is crucial and with specific switches tailored to all of the E53 lighting options you have a full suite of switches to match your lighting upgrades. Dont stop at lighting this switch panel can be used for whatever type of electronics your heart desires!

The switch panel fits in your dash perfectly and features 5 switch ports with an added securing point to manage your wires nice and tidy. To make this switch panel so versatile it was designed to accept a standard rocker/toggle switch with a 1.46" x 0.83" mounting hole. Not only does ECS offer switches specific to your X5 lighting additions but they also have blank switches to control universal electronics and blank switch plates for if you do not want to utilize all 5 ports.

Switch Panel install and operation can be seen on this "Built by Mike" video on YouTube: https://youtu.be/N7RiHu8sDAo

Features:

5 switch panel for direct E53 fitment
ABS plastic construction
Matte black to match the interior
Replaces factory ash tray with no modifications
Retains 12v outlet
Design:

The E53 switch panel idea originated from ECS engineer Mike Day when adding a full build out of lighting to his overland X5. The best ideas come from the people who are in the process of achieving a goal and find a solution to help them complete the job, but better! The switch panel was designed off of a 3D scan of the E53 X5 interior and features OEM+ fitment to blend with your interior.

Restore Reliability to Your E9x Headlights with ECS Tuning’s Premium Replacement Harness

Headlight electrical issues are a common headache for many E9x owners. Over time, the factory wiring inside Pre-LCI BMW E92 and E93 3 Series headlights—as well as all E9x M3 models equipped with factory Xenon adaptive lighting—tends to become brittle and crack. This well-known problem can lead to flickering lights, adaptive headlight malfunction warnings, or even internal shorts that cause costly damage. With genuine Xenon headlights becoming increasingly scarce, maintaining them has never been more important.

ECS Tuning offers a long-lasting solution with its Headlight Wiring Harness Repair Kit, engineered specifically to eliminate this failure point. Each harness is built from modern, heat-resistant materials and fitted with pre-terminated, OEM-style connectors for a clean, straightforward installation. The result is improved reliability and restored confidence in your lighting system.

Don’t wait until your lights fail or an adaptive headlight error appears. Replace your deteriorating factory harness with ECS Tuning’s upgraded repair kit and keep your lighting system performing as it should.

Key Features

Designed for Xenon Adaptive Headlights

OE-style fitment with enhanced insulation to resist cracking and heat damage

Complete set includes both left and right harnesses, plus integrated jump wire for full functionality

Detailed installation instructions provided for easy DIY installation

Fitment & compatibility:

All E90, E92, E93 M3 E92 Pre-LCI 328i, 328xi, 335i E92 Pre-LCI 328i, 335i Kit Contents:

One headlight repair harness (Fits left or right) 3x - heat shrink sleeves 9x - 22-24 gauge butt connectors Product Development:

This headlight repair harness was developed, engineered, and quality-tested by ECS Tuning’s in-house Research & Development team. Every detail reflects ECS’s commitment to precision and durability, utilizing advanced tools and technology, including FARO laser scanning, SolidWorks 3D CAD modeling, in-house 3D printing for rapid prototyping, and long-term performance testing.

Installation & Support:

ECS Tuning provides a comprehensive installation guide that covers the entire process, from opening your OEM headlights to installing the new harness.

- CLICK HERE FOR INSTALLATION INSTRUCTIONS -

Upgrade your BMW's OEM ZKW Bi-Xenon headlights with the Morimoto EvoX-R projector for enhanced performance and durability. Designed to address the common quality issues found in the stock projector bowls, this upgrade ensures improved brightness and efficiency, providing a clearer and more focused beam of light on the road. Compatible with various OEM or aftermarket housings, the EvoX-R projector offers a seamless bolt-on installation for hassle-free upgrading.

• Specifically designed for BMW's OEM ZKW Bi-Xenon headlights
• Features a more efficient and brighter projector design
• Enhanced projector lenses and reflective bowl for superior performance
• Direct bolt-on upgrade for many OEM or aftermarket housings
• Improves visibility and lighting output on the road

Over time, road grime, salt, and moisture take a toll on the factory rear leveling rod. The original equipment often corrodes, seizes, and eventually snaps—or worse, binds up and breaks your expensive headlight leveling sensor. With this issue in mind, ECS has engineered a heavy-duty, bulletproof solution designed to outlast the car it’s installed on.

Instead of brittle OE plastic that degrades and snaps over time, this rod is constructed from high-strength, flexible polyurethane. Paired with corrosion-resistant stainless steel ball studs, it guarantees smooth articulation and prevents the binding that destroys expensive sensors. Precision-manufactured for a perfect, bolt-on fit, this upgrade requires zero modifications to replace your fragile OEM unit.

This is a direct-fit replacement for Genuine BMW part number 37146752797, restoring proper suspension-to-sensor geometry so your headlights adjust perfectly to changing loads and road conditions.

Morimoto Retro-Rubber Headlight Sealant for BMW

Upgrade your BMW's headlights with Morimoto Retro-Rubber, the ultimate sealant solution designed specifically for high-end headlights. This automotive-grade butyl rubber, originating from Yokohama, Japan, ensures protection against moisture, guaranteeing optimal performance even in adverse weather conditions.

Benefits:

• OEM-style sealant designed for headlights prevents moisture ingress
• Specifically formulated for resealing headlights, ensuring perfect fit and seal
• Available in black or gray to match various headlight housings
• Each roll provides approximately 4 meters of glue, sufficient for multiple headlight reseals
• Easy to apply and hardens to OEM-like consistency for long-lasting performance

Elevate the appearance of your Mini with the MINI R5X Carbon Fiber Covers For Washer Headlights - Set. These carbon fiber covers are designed specifically for Mini R5X models, providing a sleek and sporty look. With their lightweight and durable construction, they not only enhance the aesthetics of your Mini but also offer protection for your headlights. Easy to install, these covers are a great way to add a touch of style to your Mini R5X.

• Designed specifically for Mini R5X models for a perfect fit
• Sleek carbon fiber construction adds a sporty look
• Lightweight and durable for long-lasting performance
• Provides protection for headlights against damage and debris