Clutch Installation Kit

Clutch Kit - E46 M3 (All) Factory

T#:56580210

Part#: 348569TCKTDXJQ3P

In Stock

$ 499.99 USD

Add to Wish List

Qty

$ 499.99 USD

Add to Wish List

The Turner E46 Clutch Refresh Kit bundles everything you need to replace your worn factory setup with OE-quality components. Built around a trusted Sachs clutch assembly, this kit is the perfect solution for restoring factory driving dynamics to your 3-Series without compromising daily driveability.

Show More Show Less

BMW E46 M3 Stage 2 Daily Clutch Kit - E46 M3

T#:15910084

Part#: K70380HDOKT1

In Stock

$ 618.99 USD

Add to Wish List

Qty

$ 618.99 USD

Add to Wish List

Enhance Your BMW's Performance with a Heavy Duty Pressure Plate

Enhance your BMW's performance with a Heavy Duty Pressure Plate, designed for high-performance modifications. This pressure plate provides an increased clamp load without significantly raising pedal pressure. The Organic disc material boasts a high metal content, doubling the co-efficient of friction compared to stock linings and reinforcing rotational strength up to a 12,000 RPM burst point. Despite its robustness, this clutch system maintains a stock feel while ensuring durability and strength.

Stage 2 Daily Clutch Kits offer:

Recommended for daily driving, street use, and moderate racing
Conservatively rated to withstand 340lbs/ft of torque
Equipped with a solid-hub center section for compatibility with OE dual-mass flywheel

Upgrade your BMW's performance with a Stage 2 Daily Clutch Kit, providing enhanced durability and performance while maintaining a familiar driving feel.

Show More Show Less

South Bend Clutch Stage 3 Daily Driver Clutch Kit

For Vehicles with production date from 2007

T#:14585010

Part#: K70526-02-SS-O-S

Ships in 2 Business Days

$ 1,074.99 USD

Add to Wish List

Qty

$ 1,074.99 USD

Add to Wish List

South Bend Clutch Stage 3 Daily Driver clutch kits are recommended for a single mass flywheel (SMF), when the original design is a dual mass flywheel (DMF). These clutch packages are designed for high-horsepower vehicles desiring a start performance similar to OE. The pressure plate is race-engineered (SS) and SFI-approved with a significant load increase over stage 1 and 2 pressure plates (+600-800 lbs.). Expect a pedal effort increase of 20 to 25 percent. Discs are assembled with heat-treated wear-resistant hubs, as well as drive plates and springs for high-load transfer and dependable operation. The sprung centers on the disc, in conjunction with the marcel fin between the linings, creating a dual dampening effect that simulates OE start performance. A performance organic friction material with a high metal content increases torque and rpm capability—and maintains low operating temperatures, which reduce wear and glazing. South Bend Clutch Stage 3 Daily Driver clutch kits are the perfect match for your high-performance street machine and occasional track use.

Show More Show Less

South Bend Clutch K70526-02-SS-DXD-B-SMF

For Vehicles with production date from 2007

T#:14585007

Part#: K70526-02-SS-DXD

Ships in 2 Business Days

$ 1,302.99 USD

Add to Wish List

Qty

$ 1,302.99 USD

Add to Wish List

Drag racing requires a Single Mass Steel Flywheel to be included with each kit when the original design is Dual Mass Flywheel. This clutch package is built to handle heavily modified cars and is designed to function according to the specific needs of the 1/4 and 1/8 mile track. The pressure plate for this kit is SFI approved Race Cover engineered to disengage with less pedal travel shortening the shift time. Discs are a puck design, which reduces rotational mass, and are assembled with all high-carbon component pieces for maximum strength. The friction material used is Graphite impregnated Ceramic perfectly suited for drag racing because of its maximum friction coefficient, rapid heat dissipation and abrupt engagement characteristics. Recommended uses drag, pulling, and drifting.

Show More Show Less

Clutch Kit B58 & N62 Engine

We Price Match - Give Us A Call or Chat!

T#:381011

Part#: 21207573789

Ships in 3 Business Days

$ 577.19

This product was last offered at the strikethrough price on
07-09-2026

$ 577.14 USD

Add to Wish List

Qty

$ 577.14 USD

Add to Wish List

Upgrade your BMW B58 or N62 engine with the Clutch Kit designed for optimal performance.

This premium clutch kit ensures smooth engagement and reliable power transfer, perfect for high-performance driving.

Specifically designed for BMW B58 and N62 engines
Ensures smooth engagement for precise shifting
Reliable power transfer for enhanced driving experience
Durable construction for long-lasting performance
Easy installation process for hassle-free upgrade

Show More Show Less

South Bend Clutch Stage 2 Daily Clutch Kit

T#:14551943

Part#: K70605-HD-O

Ships in 10 Business Days

$ 1,218.99 USD

Add to Wish List

Qty

$ 1,218.99 USD

Add to Wish List

Engineered for HP modifications. This Heavy Duty Pressure Plate has an increased clamp load with little or no increase in pedal pressure. The Organic disc material has a high metal content that increases the co-efficient of friction by two times over a stock lining and increases rotational strength up to a 12,000 RPM burst point. This clutch system maintains a stock feel while offering strength and durability. Designed to be used with the stock flywheel.

Show More Show Less

LUK Clutch Kit - E34, E39

We Price Match - Give Us A Call or Chat!

T#:394421

Part#: 21211223633

Back Ordered

$ 721.99 USD

Add to Wish List

Qty

$ 721.99 USD

Add to Wish List

Everything you need to replace your stock clutch in your E34 540i

SPEC Stage 1 Performance Clutch Kit (for SPEC Single-mass Flywheel) *...

ALL SALES FINAL. ITEMS MAY BE DAMAGED OR MISSING COMPONENTS. PLEASE SEE IMAGES BEFORE PURCHASING. Want To Haggle? Give Us A Call Or Chat To Make An Offer On This Product!

T#:40308976

Part#: SB531-2

In Stock

Sale - Save 38% $ 683.99

This product was last offered at the strikethrough price on
05-03-2026

$ 421.00 USD

Add to Wish List

Qty

Sale - Save 38%

$ 683.99

This product was last offered at the strikethrough price on
05-03-2026

$ 421.00 USD

Add to Wish List

Missing throw out bearing When considering a clutch replacement, the choice between an upgrade and stock replacement often arises. Opting for an upgrade is advantageous, especially when it involves pairing the right clutch with a single mass flywheel. The key to achieving an ideal balance of performance and feel lies in choosing a sprung hub clutch. This allows you to harness the benefits of a single mass flywheel while eliminating noise, vibration, and harshness (NVH) concerns, providing an optimal driving experience. *** ALL SALES FINAL ***

Show More Show Less

Clutch cylinder refresh kit

T#:15677559

Part#: 21526774274-KT

In Stock

$ 352.99 USD

Add to Wish List

Qty

$ 352.99 USD

Add to Wish List

A leaking clutch cylinder often feels like a failing clutch or a problematic transmission, this kit includes everything needed to not only replace but upgrade your clutch hydraulic system!

JB Racing Lightweight Aluminum Flywheel & Clutch Kit

T#:15677572

Part#: 21217528209-KT

In Stock

$ 1,386.99

This product was last offered at the strikethrough price on
06-04-2026

$ 1,307.99 USD

Add to Wish List

Qty

$ 1,307.99 USD

Add to Wish List

A lightweight aluminum flywheel is a great way to increase throttle response and free up horsepower by reducing drivetrain loss. Factory flywheels are built to minimize engine and transmission vibrations, making them heavier and requiring more energy to make them spin. An aluminum flywheel can save lots of weight over the stock steel unit - sometimes over 50%. While the dampening effect of the stock flywheel is reduced, most enthusiasts would agree that the increase in performance is well worth it. In addition, the lighter flywheel allows the engine to spin more freely, improving throttle response. This JB Racing lightweight aluminum flywheel kit and is designed to be used with the included factory clutch, making replacement and service easy and inexpensive, especially compared to specialized racing clutches. It also preserves the driveability of your car on the street, and enthusiasts tolerant of a mild to moderate NVH increase will be especially taken with this setup. In addition, the JB Racing flywheel can be easily rebuilt with a new clutch contact surface, allowing you to enjoy faster revs and superior response for many years to come.

Show More Show Less

Stage 2 Endurance Clutch Kit

For Vehicles with production date from 2007

T#:25075808

Part#: K7052602HDOCE

Ships in 2 Business Days

$ 948.99 USD

Add to Wish List

Qty

$ 948.99 USD

Add to Wish List

Engineered for HP modifications. This Heavy Duty Pressure Plate has an increased clamp load with little or no increase in pedal pressure. The Organic disc material has a high metal content that increases the coefficient of friction by two times over a stock lining and increases rotational strength up to a 12,000 RPM burst point. This clutch system maintains a stock feel while offering strength and durability. Stage 2 Endurance Clutch Kits: Recommended uses are daily and street with an emphasis on Rally and Endurance racing. Rated to hold 450lbs/ft of torque. Featuring a solid-hub center section for use with an OE dual-mass flywheel

Show More Show Less

SPEC Performance Clutch Kit With Billet Single Mass Flywheel - Stage ...

T#:42099841

Part#: SBB58A2STG5KT

Ships in 4 Business Days

$ 1,875.99

This product was last offered at the strikethrough price on
03-04-2026

$ 1,868.99 USD

Add to Wish List

Qty

$ 1,868.99 USD

Add to Wish List

This Clutch kit is rebuildable, offering long-term reliability for BMW owners pushing their vehicles to the extreme. For drivers seeking uncompromised power transfer and race-ready performance, the Stage 5 clutch kit is the ultimate choice.

Show More Show Less

South Bend Clutch Stage 3 Endurance Clutch Kit

For Vehicles with production date from 2007

T#:14585012

Part#: K70526-02-SS-TZ-

Ships in 2 Business Days

$ 1,171.99 USD

Add to Wish List

Qty

$ 1,171.99 USD

Add to Wish List

Engineered for HP modifications. This Heavy Duty Pressure Plate has an increased clamp load with little or no increase in pedal pressure. The Organic disc material has a high metal content that increases the coefficient of friction by two times over a stock lining and increases rotational strength up to a 12,000 RPM burst point. This clutch system maintains a stock feel while offering strength and durability. Stage 3 Endurance Clutch Kits: Recommended uses are daily and street with an emphasis on Rally and Endurance racing. Rated to hold 540lbs/ft of torque. Featuring a solid-hub center section for use with an aftermarket Single Mass Flywheel

Show More Show Less

Clutch Installation Kit - Simple

T#:41458807

Part#: 23117545085T3KT

Ships in 6 Business Days

$ 224.74

This product was last offered at the strikethrough price on
05-04-2026

$ 223.45 USD

Add to Wish List

Qty

$ 223.45 USD

Add to Wish List

Everything you need for a quick and easy install and a smooth clutch operation!

Clutch Installation Kit - Simple With Upgraded Metal Pivot Pin ...

T#:41458810

Part#: 23117545085T4KT

Ships in 6 Business Days

$ 230.99 USD

Add to Wish List

Qty

$ 230.99 USD

Add to Wish List

Everything you need for a quick and easy install and a smooth clutch operation!

South Bend Clutch KF80-HD-B

T#:14584994

Part#: KF80-HD-B

Ships in 2 Business Days

$ 2,321.99 USD

Add to Wish List

Qty

$ 2,321.99 USD

Add to Wish List

Stage 2 Drag Clutch Kit for F80 M3.

JB Racing Lightweight Aluminum Flywheel & Clutch Kit

T#:15710807

Part#: 520190240-KT

Ships in 3 Business Days

$ 1,060.99 USD

Add to Wish List

Qty

$ 1,060.99 USD

Add to Wish List

A lightweight aluminum flywheel is a great way to increase throttle response and free up horsepower by reducing drivetrain loss. Factory flywheels are built to minimize engine and transmission vibrations, making them heavier and requiring more energy to make them spin. An aluminum flywheel can save lots of weight over the stock steel unit - sometimes over 50%. While the dampening effect of the stock flywheel is reduced, most enthusiasts would agree that the increase in performance is well worth it. In addition, the lighter flywheel allows the engine to spin more freely, improving throttle response.

Show More Show Less

Turner OEM Clutch Installation Kit - E46 M3

T#:38229106

Part#: E46M3S54CI2KT

Ships in 1-2 days

Sale - Save 13% $ 615.99

This product was last offered at the strikethrough price on
04-17-2026

$ 535.97 USD

Add to Wish List

Qty

Sale - Save 13%

$ 615.99

This product was last offered at the strikethrough price on
04-17-2026

$ 535.97 USD

Add to Wish List

South Bend Clutch KF80-HD-O

T#:14584995

Part#: KF80-HD-O

Ships in 2 Business Days

$ 2,088.99 USD

Add to Wish List

Qty

$ 2,088.99 USD

Add to Wish List

Stage 2 Daily Clutch Kit for F80 M3. (Race Clutch)

JB Racing Lightweight Aluminum Flywheel & Clutch Kit

T#:56471617

Part#: 520-090-240KT2

Ships in 10 Business Days

$ 917.99 USD

Add to Wish List

Qty

$ 917.99 USD

Add to Wish List

The JB Racing Lightweight Aluminum Flywheel decreases rotational inertia, allowing your engine to spin up and drop revs significantly faster. Paired with a robust Sachs Clutch Kit, you get proven OEM quality friction materials designed to withstand aggressive shifting

Show More Show Less

South Bend Stage 2 Endurnace Clutch Kit

T#:14584998

Part#: KF80-HD-TZ

Ships in 2 Business Days

$ 2,205.99 USD

Add to Wish List

Qty

$ 2,205.99 USD

Add to Wish List

South Bend Clutch Stage 2 Endurance clutch kits are recommended for daily and street use with an emphasis on rally and endurance racing. An SFI-approved single-mass flywheel is recommended for racing climate applications in order to achieve optimal performance (flywheel not included). Order the clutch kit recommended for your vehicle application. Features include: Designed for the racing environment Pressure plate is precision-balanced for vibration-free operation at high-rpm Pressure plate fulcrum is altered for a positive disengagement and a quick shift Disc is engineered with a dual-damped design to provide accurate control when accelerating through corners Hybrid friction material with a full face Feramic (sintered iron) lining on the flywheel side and a high metal content organic lining on the pressure plate side Engagement is positive, yet buffered due to the high graphite content unique to Feramic facings Specifications: Alignment Tool Included: Yes Clutch Disc Quantity: Single Clutch Usage: Performance Disc Diameter: 240 Disc Material: Kevlar Disc Style: Full Face Flywheel Included: No Hub Style: Rigid Input Shaft Diameter: 1.13 Input Spline Quantity: 10 Mounting Hardware Included: No Pilot Bushing Included: Yes Pressure Plate Style: Diaphragm Quantity: Sold as a kit Throwout Bearing Included: Yes Throwout Bearing Style: Standard

Show More Show Less

Stage 3 Daily Clutch Kit

For Vehicles with production date from 2007

T#:25075811

Part#: K7052602SSODMF

Ships in 2 Business Days

$ 1,074.99 USD

Add to Wish List

Qty

$ 1,074.99 USD

Add to Wish List

Engineered for HP modifications. This Heavy Duty Pressure Plate has an increased clamp load with little or no increase in pedal pressure. The Organic disc material has a high metal content that increases the coefficient of friction by two times over a stock lining and increases rotational strength up to a 12,000 RPM burst point. This clutch system maintains a stock feel while offering strength and durability. Stage 3 Daily Clutch Kits: Recommended usage is daily, street, and moderate race Conservatively rated to hold 500 lbs/ft of torque Designed to be used with the stock dual mass flywheel.

Show More Show Less

South Bend Clutch Stage 3 Drag Clutch Kit

For Vehicles with production date from 2007

T#:25075815

Part#: K7052602SSDXDBDM

Ships in 2 Business Days

$ 1,302.99 USD

Add to Wish List

Qty

$ 1,302.99 USD

Add to Wish List

This clutch package is built to handle heavily modified cars and is designed to function according to the specific needs of the 1/4 and 1/8 mile track. The pressure plate for this kit is SFI approved Race Cover engineered to disengage with less pedal travel shortening the shift time. Discs are a puck design, which reduces rotational mass, and are assembled with all high-carbon component pieces for maximum strength. The friction material used is Graphite impregnated Ceramic perfectly suited for drag racing because of its maximum friction coefficient, rapid heat dissipation and abrupt engagement characteristics. Recommended uses drag, pulling, and drifting.

Show More Show Less

JB Racing Lightweight Aluminum Flywheel & Clutch Kit

T#:15710788

Part#: 21217515146-KT

Ships in 9 Business Days

$ 1,518.99

This product was last offered at the strikethrough price on
03-05-2026

$ 1,322.99 USD

Add to Wish List

Qty

$ 1,322.99 USD

Add to Wish List

This JB Racing lightweight aluminum flywheel kit and is designed to be used with the included factory clutch, making replacement and service easy and inexpensive, especially compared to specialized racing clutches. It also preserves the driveability of your car on the street, and enthusiasts tolerant of a mild to moderate NVH increase will be especially taken with this setup. In addition, the JB Racing flywheel can be easily rebuilt with a new clutch contact surface, allowing you to enjoy faster revs and superior response for many years to come. A lightweight aluminum flywheel is a great way to increase throttle response and free up horsepower by reducing drivetrain loss. Factory flywheels are built to minimize engine and transmission vibrations, making them heavier and requiring more energy to make them spin. An aluminum flywheel can save lots of weight over the stock steel unit - sometimes over 50%. While the dampening effect of the stock flywheel is reduced, most enthusiasts would agree that the increase in performance is well worth it. In addition, the lighter flywheel allows the engine to spin more freely, improving throttle response.

Show More Show Less

Project Cars

SELECT YOUR BMW

Clutch Kit - E46 M3 (All) Factory

BMW E46 M3 Stage 2 Daily Clutch Kit - E46 M3

Enhance Your BMW's Performance with a Heavy Duty Pressure Plate

Stage 2 Daily Clutch Kits offer:

South Bend Clutch Stage 3 Daily Driver Clutch Kit

South Bend Clutch K70526-02-SS-DXD-B-SMF

Clutch Kit B58 & N62 Engine

Upgrade your BMW B58 or N62 engine with the Clutch Kit designed for optimal performance.

South Bend Clutch Stage 2 Daily Clutch Kit

LUK Clutch Kit - E34, E39

SPEC Stage 1 Performance Clutch Kit (for SPEC Single-mass Flywheel) *...

Clutch cylinder refresh kit

JB Racing Lightweight Aluminum Flywheel & Clutch Kit

Stage 2 Endurance Clutch Kit

SPEC Performance Clutch Kit With Billet Single Mass Flywheel - Stage ...

South Bend Clutch Stage 3 Endurance Clutch Kit

Clutch Installation Kit - Simple

Clutch Installation Kit - Simple With Upgraded Metal Pivot Pin ...

South Bend Clutch KF80-HD-B

JB Racing Lightweight Aluminum Flywheel & Clutch Kit

Turner OEM Clutch Installation Kit - E46 M3

South Bend Clutch KF80-HD-O

JB Racing Lightweight Aluminum Flywheel & Clutch Kit

South Bend Stage 2 Endurnace Clutch Kit

Stage 3 Daily Clutch Kit

South Bend Clutch Stage 3 Drag Clutch Kit

JB Racing Lightweight Aluminum Flywheel & Clutch Kit

Select Vehicle

Purpose

Category

Brand

Price

Special Offers

Shipping

Narrow Results