Find Parts That Fit Your Vehicle

Performance Clutch Kits

A performance clutch kit will allow you to drive harder under increased power levels while making sure there is nothing lost to the drivetrain. If you track your vehicle or have raised the maximum horsepower through tuning or modification, chances are you will see increased benefit by installing a high performance aftermarket clutch.
Sort By:

Single Mass Flywheel Conversion Kit - N14 Engines
We Price Match - Give Us A Call or Chat!
Valeo - Corporate Logo
T#:39599347
Part#: 874013
In Stock
$ 563.99

This product was last offered at the strikethrough price on
06-30-2026

$ 465.00 USD
$ 465.00 USD
Single Mass Flywheel Conversion Kit
We Price Match - Give Us A Call or Chat!
Valeo - Corporate Logo
T#:39363094
Part#: 874015
Back Ordered
$ 649.99

This product was last offered at the strikethrough price on
06-30-2026

$ 491.00 USD
$ 491.00 USD
Valeo - Corporate Logo
T#:3578
Part#: 21207531843
Ships in 1 Business Day
$ 896.33 USD
Free Shipping
$ 896.33 USD
Free Shipping
Single mass flywheels can be resurfaced while it is recommended that dual mass flywheels are not.
Dual mass flywheels contain a rubber damper that will wear out, single mass flywheels do not have this and are inherently easier to maintain
Single mass flywheels also provide more consistent clutch feel when compared to the dual mass "self-adjusting" clutch that is notorious for inconsistency.
Valeo's single mass flywheel conversion is designed to be a similar weight and mass to OEM, making it an ideal choice for a daily driver
Show More Show Less

OEM Sachs Clutch Kit - E30 M3
2X Entries For Our G87 M2 Sweepstakes! We Price Match - Give Us A Call or Chat!
Sachs - Corporate Logo
T#:3853
Part#: 21202226141
Ships in 1 day
$ 627.01 USD
Free Shipping
$ 627.01 USD
Free Shipping
If you are doing a clutch job on an E30 M3, and want to use the stock parts, this is the kit you need. The kit includes clutch Disc, pressure plate, and throw-out bearing. SACHS is the OEM supplier for BMW.This kit fits all 1988-1991 M3 (E30).
Show More Show Less

Single Mass Flywheel Conversion Kit 52151203 - R52 / R53
We Price Match - Give Us A Call or Chat!
Valeo - Corporate Logo
T#:585277
Part#: 52151203
In Stock
$ 585.99 USD
Free Shipping
$ 585.99 USD
Free Shipping

Valeo Dual Mass Flywheel Conversion Kit for MINI Cooper S/JCW

Elevate your MINI's performance with the Valeo dual mass flywheel conversion kit. This comprehensive kit includes a solid flywheel, pressure plate, clutch disc, throw-out bearing, and more. Notably, it replaces the OE dual mass flywheel for enhanced performance.

If you're missing any hardware, don't worry. Valeo ensures your satisfaction by replacing missing items with your order number. They are also working on an improved box design to prevent damage during shipping.

Designed for the R53/R52 Cooper S/JCW with W11 engines (Supercharged Engines), this kit is not compatible with Gen 2 MINIs (R56) with N14/N18+ Turbo Engines. For an exclusive ECS Tuning kit with extra seals, explore ES3469345.

Upgrade to the single mass setup for cost-efficiency, serviceability, simplicity, and enhanced driveability. Valeo's conversion kit maintains clutch and flywheel weight for quiet and easy driving.

This kit includes a replacement flywheel, clutch disc, pressure plate, release bearing, and more. Please note that a lightened single mass flywheel may result in some "NVH" or "chatter" during operation, which can be influenced by accompanying modifications.

For complete install kits, discover ES3469345 and ES4067131, exclusively at ECS Tuning.

Installation Details:

  • Flywheel bolts (M10x19.5): Tightening torque 90 Nm, Thread lock red.
  • Pressure plate (M7x26): Tightening torque 20 Nm.
Show More Show Less
E36, E46, Z3, Z4 HD Clutch and JB Racing Flywheel Kit
2X Entries For Our G87 M2 Sweepstakes! We Price Match - Give Us A Call or Chat!
Sachs - Corporate Logo
T#:338444
Part#: 520-010S-
Ships in 8 Business Days
$ 1,650.00

This product was last offered at the strikethrough price on
03-25-2026

Starting at $ 1,613.45 USD
Free Shipping
Starting at $ 1,613.45 USD
Free Shipping
As Used on Project E36 M3
This lightweight aluminum flywheel w/ Heavy Duty "sprung-hub" clutch package is the best-engineered solution for the BMW E36, E46, Z3, and Z4 models. Instead of picking a clutch from another car that may or may not work at all, the engineers at JB Racing have taken all of the guess work out of this upgrade and incorporated a Sachs HD sprung hub clutch with the correct pressure plate and combined it with our most-popular aluminum lightweight flywheel. The Sachs HD clutch disc has a sprung hub to minimize noise and vibration and organic linings to give the feel and engagement of a stock clutch. Mixing and matching of the incorrect clutch, pressure plate, and flywheel components can lead to inconsistent engagement and feel -- why make your clutch feel worse?

In addition, the Sachs HD pressure plate will clamp with greater force -- allowing approximately 350 ft-lbs of torque,which makes it an obvious upgrade from the stock clutch kit. And with the aluminum flywheel weight savings is substantial over the stock dual-mass flywheel - which allows your motor to spool up faster and transmit more HP to the ground.

Because Sachs is an OE supplier to most German cars, replacement parts are just a phone call away. This kit uses the stock throw-out bearing (included in the price!).

BMW Fitment/Applications:
1992-1999 E36 3 Series 325i, 325is, 328i 328is, 323is
1995-1999 E36 M3
1999-2005 E46 3 Series 323i, 323Ci, 325i, 325Ci, 328i, 328Ci, 330i, 330Ci (with 5-speed transmission)
1997-2002 Z3 Roadster/Coupe with 2.3, 2.5, 2.8 or 3.0 engine
1998-2002 MZ3 M Roadster & M Coupe
2003-2005 Z4 Roadster/Coupe Z4 2.5, Z4 3.0 (5-speed transmission)
Show More Show Less

Valeo - Corporate Logo
T#:2211795
Part#: 52151204
Ships in 2 Business Days
$ 294.99 USD
Free Shipping
$ 294.99 USD
Free Shipping

MINI R52 R53 Clutch Kit For Solid Flywheel Conversion

Upgrade your Mini's clutch system with the MINI R52 R53 Clutch Kit For Solid Flywheel Conversion. Specifically designed for solid flywheel conversion, this clutch kit ensures optimal performance and durability for your Mini. Say goodbye to clutch issues and enjoy smoother engagements and reliable performance on the road.

  • Designed for solid flywheel conversion
  • Ensures optimal clutch performance
  • Provides smoother engagements
  • Enhances reliability on the road
  • Made for durability
Show More Show Less
Valeo - Corporate Logo
T#:383915
Part#: 835115
In Stock at Vendor
$ 1,388.30 USD
Free Shipping
$ 1,388.30 USD
Free Shipping

This kit from Valeo is a simple way to easily convert your stock dual mass flywheel clutch system to a single mass system.

Dual mass flywheels allow for fluid-feeling clutch engagements and offer a more luxurious feel than single-mass flywheels. However, with these benefits come significant drawbacks. Why convert from a dual-mass flywheel to a single-mass flywheel?

Cost: Dual-mass flywheels are expensive, with the cost of replacement often times being double or triple than that of converting to a single-mass flywheel.
Serviceability: Single-mass flywheels can be resurfaced, eliminating the need to replace with the next clutch service. - something that is not recommended with dual-mass flywheels, as they contain a rubber section that is more failure-prone in high mileage application.
Simplicity: Single-mass flywheels lack the complexity of dual-mass flywheels, making them inherently more reliable. Dual-mass flywheels contain a rubber damper or hub that will, like all rubber components, wear out with time.
Pedal Feel: Many enthusiasts prefer to eliminate BMW's "Self Adjusting Clutch", which has been known to provide an unpredictable, inconsistent engagement point.
Driveability: Valeo's conversion kit has been designed to maintain nearly identical clutch and flywheel weight, ideal for keeping the clutch quiet and easy to drive.
Kit contents:

Single-mass flywheel
Non-Self Adjusting Clutch and pressure plate
Throw out bearing
Pressure plate bolts
Flywheel bolts
Clutch alignment tool

Show More Show Less

JB Racing - Corporate Logo
T#:340509
Part#: WCCLUTCH
Ships in 5 Business Days
Starting at $ 1,999.00 USD
Free Shipping
Starting at $ 1,999.00 USD
Free Shipping
The ultimate in a racing flywheel and clutch! This was developed for use in our E36 and E46 World Challenge Touring Cars. The combined weight of the clutch and flywheel is only 11lbs!!!

This multi-disc (2 or 3 disc setups) offer a minimal flywheel mass (enough to include a factory ring gear for the starter) and a small 5.5" clutch assembly rated to 500hp. By saving as much weight as possible less energy is used in simply spinning the flywheel/clutch assembly and that means a lot more power and torque is available at the drive wheels. The flywheel and clutch is one of the first areas that engine builders address when making the rotating assembly lighter for race engines and this is among the most advanced and lightest racing clutch kits available for your BMW race car.

The JB Ultra-Light Performance racing clutch is available in 2-disc or 3-disc setups. We used the 5.5"/140mm size in our Touring Cars but larger sizes are available too. This is a turn-key racing clutch and flywheel kit that you don't have to engineer or spec yourself. This is the same clutch setup we used when winning the 2003 and 2004 Touring Car Championships - the quality and performance is unquestionable. That series also employed standing starts at each race and this clutch setup performed flawlessly with nearly a full season of racing on them before needing a change.

JB Ultra-Light flywheels include:
  • precision CNC machined aluminum flywheel
  • zero-balanced up to 10,000 RPM
  • replaceable hardened steel clutch friction surface
  • Helicoil threaded inserts
  • high-strength grade 10.9 hardware
  • multi-disc racing clutch with Performance racing pressure plate
  • JB Racing throw-out bearing with custom bobbin
    This is a true racing clutch and will not function as a street-able clutch at all. It behaves as an on/off switch with no slippage allowed. Extreme care must be used when driving on to trailers and around the paddock. But when driven correctly the life span of this clutch is amazing - we could get a full season of racing a 300hp M54 from this clutch setup including standing starts at every race! Replacement clutch components and flywheel rebuilding are available.

    A properly adjusted clutch stop is required for use with this clutch kit.

    Stock Flywheel + Clutch Weight = 45+lbs
    JB Ultra-Light Flywheel & Clutch Weight = 11lbs

    This item fits the following BMWs:
    1992-1999 E36 BMW 325i 325is 328i 328is M3
    1999-2006 E46 BMW 323i 323ci 325i 325ci 328i 328ci 330i 330ci (5-speed)
    1997-2002 Z3 BMW Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M Roadster M Coupe
    2003-2005 E85 BMW Z4 2.5i (5-speed)
  • Show More Show Less

    JB Racing - Corporate Logo
    T#:3763
    Part#: 520-070-228
    Ships in 5 Business Days
    $ 630.00 USD
    Free Shipping
    $ 630.00 USD
    Free Shipping
    Aluminum flywheels are much lighter than the stock steel flywheel and that produces better throttle response and more available horsepower to the wheels for faster acceleration. The JB Racing aluminum flywheels are a direct replacement for the stock flywheel and work with stock clutch components for an easy upgrade with very little downside.

    Modern flywheels are built with additional components and features that are designed to dampen and minimize vibrations from the engine and transmission. As a result they have become bloated in weight and that means more energy is used up just making the flywheel spin. The weight difference between an aluminum and steel flywheel is huge - sometimes more than 50% less. Without the additional mass, more energy can be diverted to where it counts most - moving the car. The flywheel and clutch is one of the first areas that engine builders address when making the rotating assembly lighter for race engines. The dampening effect is just not needed on cars that are focused on performance.

    In addition to releasing more power to the wheels, the lighter flywheel allows the engine to spin more freely, which improves throttle response. Again, the difference is huge as you watch the revs build faster than before. With the engine spinning easier the power band comes up much sooner. The stock steel flywheel feels lazy in comparison. There is a driving adjustment required to get used to how much faster the engine revs but that's not really a downside.

    The JB lightweight flywheel is designed to be used with a factory organic clutch - the same clutch kit that you would get from any BMW dealer. This makes replacement clutch components easy to source and inexpensive when compared to specialized racing clutches. By using the factory BMW clutch, JB has also made the whole assembly easy to live with when used on the street. The clutch behaves the same as it originally did - just with better throttle response and more power! The JB flywheel can also be rebuilt with a new clutch contact surface - you don't have to buy a new flywheel.

    Aluminum flywheels are considered 'single-mass' flywheels because they do not have the same dampening designs as an original 'dual-mass' flywheel. With a single-mass design more noise and vibration may be noticeable. There are steps you can take to minimize the noise - heavier weight transmission oil and clutch discs with anti-rattle springs (sprung-hub clutch).

    The JB flywheel includes ignition trigger wheel.

    This flywheel replaces the stock original single-mass flywheel and should only be used with the corresponding 'single-mass' clutch kit. According to BMW the single mass flywheel was installed in all 325e up to 5/86 production date but we have seen some later cars with a single-mass flywheel. The age of the car almost guarantees one or more clutch replacements and possibly a change to the original flywheel as well. You may not know which flywheel is currently installed until the flywheel cover or the transmission is removed.

    Stock Flywheel Weight = 24.0lbs
    JB Flywheel Weight = 8.5lbs

    This item fits the following BMWs:
    1984-1988 E30 BMW 325e 325es (with single mass flywheel)
    Show More Show Less
    JB Racing - Corporate Logo
    T#:3749
    Part#: 520-120-228
    In Stock
    $ 854.00 USD
    Free Shipping
    $ 854.00 USD
    Free Shipping
    Aluminum flywheels are much lighter than the stock steel flywheel and that produces better throttle response and more available horsepower to the wheels for faster acceleration. The JB Racing aluminum flywheels are a direct replacement for the stock flywheel and work with stock clutch components for an easy upgrade with very little downside.

    Modern flywheels are built with additional components and features that are designed to dampen and minimize vibrations from the engine and transmission. As a result they have become bloated in weight and that means more energy is used up just making the flywheel spin. The weight difference between an aluminum and steel flywheel is huge - sometimes more than 50% less. Without the additional mass, more energy can be diverted to where it counts most - moving the car. The flywheel and clutch is one of the first areas that engine builders address when making the rotating assembly lighter for race engines. The dampening effect is just not needed on cars that are focused on performance.

    In addition to releasing more power to the wheels, the lighter flywheel allows the engine to spin more freely, which improves throttle response. Again, the difference is huge as you watch the revs build faster than before. With the engine spinning easier the power band comes up much sooner. The stock steel flywheel feels lazy in comparison. There is a driving adjustment required to get used to how much faster the engine revs but that's not really a downside.

    The JB lightweight flywheel is designed to be used with a factory organic clutch - the same clutch kit that you would get from any BMW dealer. This makes replacement clutch components easy to source and inexpensive when compared to specialized racing clutches. By using the factory BMW clutch, JB has also made the whole assembly easy to live with when used on the street. The clutch behaves the same as it originally did - just with better throttle response and more power! The JB flywheel can also be rebuilt with a new clutch contact surface - you don't have to buy a new flywheel.

    Aluminum flywheels are considered 'single-mass' flywheels because they do not have the same dampening designs as an original 'dual-mass' flywheel. With a single-mass design more noise and vibration may be noticeable. There are steps you can take to minimize the noise - heavier weight transmission oil and clutch discs with anti-rattle springs (sprung-hub clutch).

    The JB flywheel includes ignition trigger wheel.

    This flywheel replaces the stock original dual-mass flywheel and should only be used with the corresponding 'dual-mass' clutch kit. According to BMW the dual mass flywheel was installed in all 325/325e from 5/86 on but we have seen some later cars with a single-mass flywheel. The age of the car almost guarantees one or more clutch replacements and possibly a change to the original flywheel as well. You may not know which flywheel is currently installed until the flywheel cover or the transmission is removed.

    Stock Flywheel Weight = 27.5lbs
    JB Flywheel Weight = 10.0lbs

    This item fits the following BMWs:
    1984-1988 E30 BMW 325e 325es (with dual mass flywheel)
    Show More Show Less
    Valeo Single Mass Clutch Kit - 330i 6 speed
    We Price Match - Give Us A Call or Chat!
    Valeo - Corporate Logo
    T#:400593
    Part#: 835101
    Back Ordered
    $ 1,242.99 USD
    Free Shipping
    $ 1,242.99 USD
    Free Shipping


    OS Giken - Corporate Logo
    T#:2209
    Part#: BM533-BF6EA
    Ships in 2 Business Days
    $ 999.99 USD
    Free Shipping
    $ 999.99 USD
    Free Shipping
    This kit includes parts needed to overhaul the OS Giken E90/E92 M3 Grand Am legal clutch kit, including clutch discs (2), center plates, and cover bolts (all). As used in the Grand Am KONI Challenge GS class V8 M3s, including both Turner Motorsport E92 M3 race cars.
    Show More Show Less
    JB Racing - Corporate Logo
    T#:5774218
    Part#: 520-210-215
    Ships in 5 Business Days
    $ 1,106.00 USD
    Free Shipping
    $ 1,106.00 USD
    Free Shipping
    Aluminum flywheels are much lighter than the stock steel flywheel and that produces better throttle response and more available horsepower to the wheels for faster acceleration. The JB Racing aluminum flywheels are a direct replacement for the stock flywheel and work with stock clutch components for an easy upgrade with very little downside.
    Show More Show Less
    Clutch Kit Set - Priced As Set JCW R5X
    2X Entries For Our G87 M2 Sweepstakes! We Price Match - Give Us A Call or Chat!
    Sachs - Corporate Logo
    T#:592237
    Part#: 21208607915
    In Stock
    $ 312.99 USD
    Free Shipping on orders $49 and up

    Restore your BMW MINI's performance with the complete Clutch Kit from MINI. If you're experiencing clutch slipping despite a seemingly intact slave cylinder and pedal, it's time to replace your clutch for seamless functionality.

    Key Benefits:

    • Complete Clutch Replacement: Includes clutch disc, pressure plate, and release bearing for a comprehensive clutch solution.
    • Enhanced Performance: Restores proper clutch engagement and functionality, ensuring optimal performance for your MINI.
    • Improved Driveability: Eliminates clutch slipping issues, enabling smoother gear shifts and responsive driving.
    • Genuine MINI Parts: Guaranteed quality and compatibility with your MINI vehicle, ensuring reliable performance.
    Show More Show Less

    Valeo - Corporate Logo
    T#:380538
    Part#: 52401225
    Ships on Sep 4, 2026
    $ 1,016.99 USD
    Free Shipping
    $ 1,016.99 USD
    Free Shipping

    This kit from Valeo is a simple way to easily convert your stock dual mass flywheel clutch system to a single mass system.

    Dual mass flywheels allow for fluid-feeling clutch engagements and offer a more luxurious feel than single-mass flywheels. However, with these benefits come significant drawbacks. Why convert from a dual-mass flywheel to a single-mass flywheel?

    Cost: Dual-mass flywheels are expensive, with the cost of replacement often times being double or triple than that of converting to a single-mass flywheel.
    Serviceability: Single-mass flywheels can be resurfaced, eliminating the need to replace with the next clutch service. - something that is not recommended with dual-mass flywheels, as they contain a rubber section that is more failure-prone in high mileage application.
    Simplicity: Single-mass flywheels lack the complexity of dual-mass flywheels, making them inherently more reliable. Dual-mass flywheels contain a rubber damper or hub that will, like all rubber components, wear out with time.
    Pedal Feel: Many enthusiasts prefer to eliminate BMW's "Self Adjusting Clutch", which has been known to provide an unpredictable, inconsistent engagement point.
    Driveability: Valeo's conversion kit has been designed to maintain nearly identical clutch and flywheel weight, ideal for keeping the clutch quiet and easy to drive.
    Kit contents:

    Single-mass flywheel
    Non-Self Adjusting Clutch and pressure plate
    Throw out bearing
    Pressure plate bolts
    Flywheel bolts
    Clutch alignment tool

    Show More Show Less

    OS Giken - Corporate Logo
    T#:30164597
    Part#: MN023-BJ5
    Back Ordered
    $ 1,920.00 USD
    Free Shipping
    $ 1,920.00 USD
    Free Shipping

    MINI R Chassis OS Giken Clutch Kit - STR Series enhances performance and durability for your BMW or MINI. This high-performance clutch kit from OS Giken is designed specifically for MINI R chassis models, offering improved torque capacity and durability. With its STR series design, it ensures smooth engagement and precise control, perfect for both street and track applications. Engineered with high-quality materials, this clutch kit provides reliable performance under demanding conditions.

    • Enhances performance and durability
    • Designed specifically for MINI R chassis models
    • Improved torque capacity for enhanced power transfer
    • STR series design ensures smooth engagement
    • Suitable for both street and track use

    Upgrade your BMW or MINI R chassis with the MINI R Chassis OS Giken Clutch Kit - STR Series for superior clutch performance and reliability.

    Show More Show Less
    OS Giken - Corporate Logo
    T#:23383349
    Part#: MN023-AQ6
    Ships in 3 Business Days
    $ 1,680.00 USD
    Free Shipping
    $ 1,680.00 USD
    Free Shipping
    Introducing the Mini Grand Touring Clutch, a revolutionary addition to the clutch lineup. This clutch incorporates cutting-edge technology from our Racing Multi-plate Clutches, enhanced further by our exclusive "floating pressure system." Say goodbye to rough and noisy drives - experience a seamless and chatter-free driving sensation. The Mini Grand Touring Clutch is offered in both single and twin plate configurations, with options for soft or hard clutch covers to cater to various engine outputs. Achieve a maximum torque of 315 FT/LBS with this innovative clutch.
    • Incorporates advanced "floating pressure system" for a smooth driving experience
    • Retains technology from Racing Multi-plate Clutches
    • Available in single and twin plate configurations
    • Options for soft or hard clutch covers to suit engine output
    Show More Show Less

    JB Racing - Corporate Logo
    T#:340510
    Part#: WCCLUTCH-E46M3
    Ships in 5 Business Days
    Starting at $ 2,015.99 USD
    Free Shipping
    Starting at $ 2,015.99 USD
    Free Shipping
    The ultimate in a racing flywheel and clutch! This was developed for use in our E36 and E46 World Challenge Touring Cars. The combined weight of the clutch and flywheel is only 11lbs!!!

    This multi-disc (2 or 3 disc setups) offer a minimal flywheel mass (enough to include a factory ring gear for the starter) and a small 5.5" clutch assembly rated to 500ft-lbs. By saving as much weight as possible less energy is used in simply spinning the flywheel/clutch assembly and that means a lot more power and torque is available at the drive wheels. The flywheel and clutch is one of the first areas that engine builders address when making the rotating assembly lighter for race engines and this is among the most advanced and lightest racing clutch kits available for your BMW race car.

    The JB Ultra-Light Performance racing clutch is available in 2-disc or 3-disc setups. A 3-disc setup is less susceptible to heat and will have a higher torque capacity. On our M54-powered 325i Touring Cars (approximately 300hp) we used the 5.5"/140mm 2-disc configuration. The 5.5" clutch was a perfect blend of performance and durability. It wasn't too small to suffer from high temperatures and wasn't too large that it couldn't be slipped (slipping prevents damage to other components). This is a turn-key racing clutch and flywheel kit that you don't have to engineer or spec yourself. This is the same clutch setup we used when winning the 2003 and 2004 Touring Car Championships - the quality and performance is unquestionable. That series also employed standing starts at each race and this clutch setup performed flawlessly with nearly a full season of racing on them before needing a change.

    JB Ultra-Light flywheels include:
  • precision CNC machined aluminum flywheel
  • zero-balanced
  • replaceable hardened steel clutch friction surface
  • Helicoil threaded inserts
  • high-strength grade 10.9 hardware
  • multi-disc Sachs or Powertrain Technology racing clutch with racing pressure plate
  • JB Racing throw-out bearing with custom bobbin
    This is a true racing clutch and will not function as a street-able clutch at all. It behaves as an on/off switch with no slippage allowed. Extreme care must be used when driving on to trailers and around the paddock. But when driven correctly the life span of this clutch is amazing - we could get a full season of racing a 300hp M54 from this clutch setup including standing starts at every race! Replacement clutch components and flywheel rebuilding are available.

    A properly adjusted clutch stop is required for use with this clutch kit.

    Stock Flywheel + Clutch Weight = 45+lbs
    JB Ultra-Light Flywheel & Clutch Weight = 11lbs

    This item fits the following BMWs:
    2001-2006 E46 BMW M3
  • Show More Show Less
    OS Giken - Corporate Logo
    T#:54388380
    Part#: MN021-BJ5
    Ships in 2 Business Days
    New Item
    $ 1,920.00 USD
    Free Shipping
    $ 1,920.00 USD
    Free Shipping
    Upgrade your drivetrain and experience the perfect balance of track performance and street drivability.

    JB Racing - Corporate Logo
    T#:5774217
    Part#: 520-065-228
    Ships on Sep 3, 2026
    $ 630.00 USD
    Free Shipping on orders $49 and up
    Aluminum flywheels are much lighter than the stock steel flywheel and that produces better throttle response and more available horsepower to the wheels for faster acceleration. The JB Racing aluminum flywheels are a direct replacement for the stock flywheel and work with stock clutch components for an easy upgrade with very little downside.
    Show More Show Less

    OS Giken - Corporate Logo
    T#:22756718
    Part#: MN023-AJ6
    Back Ordered
    $ 1,490.00 USD
    Free Shipping
    $ 1,490.00 USD
    Free Shipping

    Upgrade Your Clutch for Spirited Driving with STR Clutch

    Elevate your driving experience with the STR Clutch, perfect for those who enjoy spirited driving and require a balance between street and occasional race performance. While it may differ from a Factory Dual Mass Clutch, the STR Clutch comes in single and twin plate configurations, paired with a unique clutch cover to maintain a factory clutch pedal feel. This ensures a race-ready clutch that's also easy to handle in everyday driving situations.

    Key Features:

    • Available in single and twin plate configurations
    • Unique clutch cover for a factory-like pedal feel
    • Suitable for spirited driving and occasional racing
    • Dampened Single Plate with Soft Diaphragm
    • Release Assembly included
    • Maximum capacity: 285 FT/LBS TORQUE

    Upgrade your clutch and enjoy the performance and versatility of the STR Clutch.

    Show More Show Less
    OEM Valeo Clutch Kit - SMG Transmission
    We Price Match - Give Us A Call or Chat!
    Valeo - Corporate Logo
    T#:379445
    Part#: 21212283089
    Back Ordered
    $ 1,733.99 USD
    Free Shipping
    $ 1,733.99 USD
    Free Shipping

    This clutch kit from Valeo includes a new friction disc, pressure plate, and throwout/release bearing. Valeo is an OE BMW supplier - save money and buy quality parts by buying those parts in a different box!

    For vehicles with an SMG transmission.

    Show More Show Less