Crankshaft Pulleys & Harmonic Balancers

Complete Vibration Damper Replacement Kit w/ Specialty Tool Kit - E70...

T#:27672133

Part#: 11238511371TKT5

Ships in 2 Business Days

Sale - Save 2% $ 710.99

This product was last offered at the strikethrough price on
06-22-2026

$ 696.95 USD

Add to Wish List

Qty

Sale - Save 2%

$ 710.99

This product was last offered at the strikethrough price on
06-22-2026

$ 696.95 USD

Add to Wish List

The vibration damper in the E70 X5 35d is a common failure item and can fail at as low as 60 thousand miles leaving you stranded. This kit includes everything needed to replace your vibration damper and service your drive belt system! Vibration Dampers (also called Harmonic Dampers or Harmonic Balancers) absorb and remove unwanted vibrations due to torsional twisting of the crankshaft. During cylinder combustions, the crank quickly flexes ever so slightly, resulting in resonance vibrations. These vibrations could lead to damage of the crankshaft or crank bearings over time if not accounted for. The vibration damper helps to eliminate these vibrations, thereby extending the life of your engine's mechanical components and preventing damage. If your vibration damper has failed, you will likely notice excess engine vibrations or shaking that will gradually get worse, especially around certain RPMs where the vibration resonance is most pronounced. This kit includes all of the components necessary to replace your damper with an OEM damper from Corteco, including belts, pulleys, hardware, and more. Also included in this kit is a brand-new line of specialty tools from Schwaben designed specifically for this replacement! You will get a Crankshaft Pulley Turner Tool, Stretch Belt Remover/Installer, T50 Alternator Wrench, and a 15/16" Pass-Through Socket, all included to make swapping out your old damper a quick and easy process! Standard tools you might need but are not included: 8mm Drill Bit (to use as flywheel locking pin) 32mm Fan Clutch Wrench - You may want a second 32mm to hold the coupler in place 24mm Box Wrench - For releasing tensioner Torque Wrench - To torque new crankshaft bolts Breaker Bar - to drive the crankshaft bolts further

Show More Show Less

Basic Vibration Damper Replacement Kit w/ Specialty Tool Kit - E70 X5...

T#:27672134

Part#: 11238511371TKT6

Ships in 2 Business Days

Sale - Save 1% $ 577.99

This product was last offered at the strikethrough price on
05-03-2026

$ 573.43 USD

Add to Wish List

Qty

Sale - Save 1%

$ 577.99

This product was last offered at the strikethrough price on
05-03-2026

$ 573.43 USD

Add to Wish List

The vibration damper in the E70 X5 35d is a common failure item and can fail at as low as 60 thousand miles leaving you stranded. This kit includes everything needed to replace your vibration damper and service your drive belt system! Vibration Dampers (also called Harmonic Dampers or Harmonic Balancers) absorb and remove unwanted vibrations due to torsional twisting of the crankshaft. During cylinder combustions, the crank quickly flexes ever so slightly, resulting in resonance vibrations. These vibrations could lead to damage of the crankshaft or crank bearings over time if not accounted for. The vibration damper helps to eliminate these vibrations, thereby extending the life of your engine's mechanical components and preventing damage. If your vibration damper has failed, you will likely notice excess engine vibrations or shaking that will gradually get worse, especially around certain RPMs where the vibration resonance is most pronounced. This basic kit includes the components necessary to replace your damper with an OEM damper from Corteco, including two belts and the Corteco Vibration Damper pulley. Also included in this kit is a brand-new line of specialty tools from Schwaben designed specifically for this replacement! You will get a Crankshaft Pulley Turner Tool, Stretch Belt Remover/Installer, T50 Alternator Wrench, and a 15/16" Pass-Through Socket, all included to make swapping out your old damper a quick and easy process! Standard tools you might need but are not included: 8mm Drill Bit (to use as flywheel locking pin) 32mm Fan Clutch Wrench - You may want a second 32mm to hold the coupler in place 24mm Box Wrench - For releasing tensioner Torque Wrench - To torque new crankshaft bolts Breaker Bar - to drive the crankshaft bolts further

Show More Show Less

Crankshaft Pulley

T#:55066632

Part#: 1004202

Special Order: No Guaranteed ETA

$ 154.99 USD

Add to Wish List

Qty

$ 154.99 USD

Add to Wish List

This replacement crankshaft harmonic balancer from febi bilstein is designed to restore factory-level drivetrain refinement and protect your engine.

TVD Pulley For Crankshaft

T#:56110333

Part#: 11238602800

Special Order: No Guaranteed ETA

$ 216.99 USD

Add to Wish List

Qty

$ 216.99 USD

Add to Wish List

Maintain your BMW's smooth engine dynamics and accessory belt reliability with this OE-matching quality replacement crankshaft pulley from Febi Bilstein.

TVD Pulley For Crankshaft With Bolts

T#:56616373

Part#: 11238602800SK

Special Order: No Guaranteed ETA

$ 146.99 USD

Add to Wish List

Qty

$ 146.99 USD

Add to Wish List

Protect your engine's bottom end against destructive torsional harmonics with the Febi Bilstein Harmonic Crankshaft Damper Pulley.

Basic Vibration Damper Replacement Kit w/ Specialty Tool Kit - E90 33...

T#:27672136

Part#: 11238511371TKT8

Ships in 2 Business Days

$ 561.99

This product was last offered at the strikethrough price on
05-03-2026

$ 559.34 USD

Add to Wish List

Qty

$ 559.34 USD

Add to Wish List

The vibration damper in the 335d is a common failure item and can fail at as low as 60 thousand miles leaving you stranded. This kit includes everything needed to replace your vibration damper and service your drive belt system! Vibration Dampers (also called Harmonic Dampers or Harmonic Balancers) absorb and remove unwanted vibrations due to torsional twisting of the crankshaft. During cylinder combustions, the crank quickly flexes ever so slightly, resulting in resonance vibrations. These vibrations could lead to damage of the crankshaft or crank bearings over time if not accounted for. The vibration damper helps to eliminate these vibrations, thereby extending the life of your engine's mechanical components and preventing damage. If your vibration damper has failed, you will likely notice excess engine vibrations or shaking that will gradually get worse, especially around certain RPMs where the vibration resonance is most pronounced. This basic kit includes the components necessary to replace your damper with an OEM damper from Corteco, including two belts and the Corteco Vibration Damper pulley. Also included in this kit is a brand-new line of specialty tools from Schwaben designed specifically for this replacement! You will get a Crankshaft Pulley Turner Tool, Stretch Belt Remover/Installer, T50 Alternator Wrench, and a 15/16" Pass-Through Socket, all included to make swapping out your old damper a quick and easy process! Standard tools you might need but are not included: 8mm Drill Bit (to use as flywheel locking pin) 32mm Fan Clutch Wrench - You may want a second 32mm to hold the coupler in place 24mm Box Wrench - For releasing tensioner Torque Wrench - To torque new crankshaft bolts Breaker Bar - to drive the crankshaft bolts further

Show More Show Less

Complete Vibration Damper Replacement Kit w/ Specialty Tool Kit - E90...

T#:27672135

Part#: 11238511371TKT7

Ships in 2 Business Days

$ 751.37 USD

Add to Wish List

Qty

$ 751.37 USD

Add to Wish List

The vibration damper in the 335d is a common failure item and can fail at as low as 60 thousand miles leaving you stranded. This kit includes everything needed to replace your vibration damper and service your drive belt system! Vibration Dampers (also called Harmonic Dampers or Harmonic Balancers) absorb and remove unwanted vibrations due to torsional twisting of the crankshaft. During cylinder combustions, the crank quickly flexes ever so slightly, resulting in resonance vibrations. These vibrations could lead to damage of the crankshaft or crank bearings over time if not accounted for. The vibration damper helps to eliminate these vibrations, thereby extending the life of your engine's mechanical components and preventing damage. If your vibration damper has failed, you will likely notice excess engine vibrations or shaking that will gradually get worse, especially around certain RPMs where the vibration resonance is most pronounced. This kit includes all of the components necessary to replace your damper with an OEM damper from Corteco, including belts, pulleys, hardware, and more. Also included in this kit is a brand-new line of specialty tools from Schwaben designed specifically for this replacement! You will get a Crankshaft Pulley Turner Tool, Stretch Belt Remover/Installer, T50 Alternator Wrench, and a 15/16" Pass-Through Socket, all included to make swapping out your old damper a quick and easy process! Standard tools you might need but are not included: 8mm Drill Bit (to use as flywheel locking pin) 32mm Fan Clutch Wrench - You may want a second 32mm to hold the coupler in place 24mm Box Wrench - For releasing tensioner Torque Wrench - To torque new crankshaft bolts Breaker Bar - to drive the crankshaft bolts further

Show More Show Less

Project Cars

SELECT YOUR BMW

Crankshaft Pulleys & Harmonic Balancers

Complete Vibration Damper Replacement Kit w/ Specialty Tool Kit - E70...

Basic Vibration Damper Replacement Kit w/ Specialty Tool Kit - E70 X5...

Crankshaft Pulley

TVD Pulley For Crankshaft

TVD Pulley For Crankshaft With Bolts

Basic Vibration Damper Replacement Kit w/ Specialty Tool Kit - E90 33...

Complete Vibration Damper Replacement Kit w/ Specialty Tool Kit - E90...

Select Vehicle

Category

Brand

Price

Special Offers

Shipping

Narrow Results