Find Parts That Fit Your Vehicle

Oil Separation & Breather System

Every car has a crankcase vent system that is supposed to suppress oil from making it into the intake ports and combustion chamber. A good functioning system will separate oil from the atmosphere and return it to the oil pan (or collect it in a catch can) while allowing the leftover vapors to burn in the combustion chamber or recirculate through the system. This has always been known as a PCV system (Positive Crankcase Ventilation) but BMW has several other names for it - oil separator, crankcase vent (CCV), and cyclonic separator. Failures in the system will allow raw oil to enter the intake and eventually into the engine itself which can have disastrous effects on engine performance and longevity. As emissions regulations on oil and gas venting have gotten more stringent the PCV systems have gotten more complex and failure prone. And because the CCV is intertwined with other systems you could experience rough running, loss of power, higher oil consumption, misfiring, stalling, or other annoying issues. There is no replacement interval for these so we recommend inspecting your crankcase vent system as part of your regular maintenance routines. Symptoms of a bad crankcase vent are: whitish or yellowish film on the underside of the oil cap, whistling/squealing noises (not caused by a belt), suction on the oil cap that makes it hard to unscrew, large amounts of white smoke from the exhaust, and excessive oil consumption.
Sort By:

Vargas Turbo Technologies - Corporate Logo
T#:389684
Part#: VTT-N54-PCV
In Stock
$ 68.99 USD
Free Shipping on orders $49 and up
The crankcase oil vent system on the N52/N54 is one of its weakest and cheaply designed systems. We see crankcase vent issues on even stock engines but with more boost the problems are exponential. This Vargas upgraded PCV valve, and an oil catch can, are what the N54 engine needs and may alleviate most of your oil and boost leak issues. The PCV valve is supposed to let oil either return to the oil pan or pass through the intake manifold and get burned up in the combustion chamber. However, BMW used a weak plastic vent valve that doesn't seal well when under boost. Instead of  closing and venting the oil out of the intake, it's forced through this valve and into the intake and coating your valves with oil residue and carbon. Most boost equals more oil forcing its way by. This upgraded N54 PCV valve uses higher grade materials, including aluminum, to provide a better seal and prevent oil from entering the intake. It's an easy install and a must-have item when considering any turbo work.
Show More Show Less