Find Parts That Fit Your Vehicle

Home
Suspension

BMW Suspension Parts

Your BMW's handling is determined by the capabilities and age of your suspension components. Our selected aftermarket performance suspension like coilovers, lowering springs, cup kits, and dampers can improve the handling of your BMW dramatically. With those upgrades comes the needs for proper adjustment; our recommended supporting modifications comes stiffer sway bars, bushings, and adjustable camber/caster plates, to name a few found on this page. Completely build your suspension for the most competitive BMW driving experience, achieve your perfect look, or simply replace your worn suspension with our recommended parts.

Sub-Categories

Sort By:

TCKR E82 & E9X (non-M) Single Adjustable Coilover Kit - F300# - R400#...

T#:27905143

Part#: TCKE9XSNG300400

Ships in 3 Business Days

$ 2,484.99 USD

Add to Wish List

Qty

$ 2,484.99 USD

Add to Wish List

Rear Shock Mounts (RSM) - Upper - OEM Rubber - E82, E9X (non-M) (Pair...

T#:11986

Part#: E9X-URSM

In Stock

Sale - Save 2% $ 49.12

This product was last offered at the strikethrough price on
05-03-2026

$ 48.01 USD

Add to Wish List

Qty

Sale - Save 2%

$ 49.12

This product was last offered at the strikethrough price on
05-03-2026

$ 48.01 USD

Add to Wish List

A 4-piece set of new OEM rear upper and lower shock mounts to complete your shock install or replace broken mounts (RSM). The top mounts on the shocks for the E82 and E90/E91/E92/E93 consist of 4 pieces. These E9X URSM pieces fit all E82 and E9X except the M3 with EDC.

Rear Shock Mount (RSM) Kit consists of:
A. rear upper-top shock mounts, 33506771737
B. rear upper-middle shock mounts, 33506767010
C. rear upper-bottom shock mounts, 33506771738
D. rear upper supporting cup, 33526764418 (sits over bumpstop)
There is also a lower mount that is available separately. This package covers only the rear upper shock mounts.

That's a lot of rubber that takes constant deflecting and absorbing of cornering forces and impacts from bumps, potholes, etc. Replacing the RSMs is key to maintaining a quiet and comfortable ride. Price is for all 4 upper pieces for BOTH sides of the car.

This item fits the following BMWs:
2006-2011 E90 BMW 325i 325xi 328i 328xi 328i xDrive 330i 330xi 335d 335i 335xi 335i xDrive - Sedan
2006-2011 E91 BMW 325xi 328i 328xi 328i xDrive - Wagon
2007-2012 E92 BMW 328i 328xi 328i xDrive 335i 335is 335xi 335i xDrive - Coupe
2007-2012 E93 BMW 328i 335i - Convertible

Show More Show Less

BMW Motorsport Rear Sway Bar Bushing - 14-15mm - E90 E92 E82 ...

T#:3213

Part#: 33558300883

Ships on Sep 16, 2026

$ 31.99 USD

Add to Wish List

Qty

$ 31.99 USD

Add to Wish List

This is the factory BMW Motorsport Group N high performance rear sway bar / swaybar bushing for cars with a 14/15mm sway bar. This heavy duty rubber bushing is stiffer than the stock bushing to improve handling. They are great for track use - and Grand Am Cup legal! - yet can also be used on a street driven car - please note these will not be as compliant as the stock rubber bushing.

Sold Individually

This item fits the following BMWs:
2008+ E82 BMW 128i 135i
2006+ E90 BMW 325i 328i 330i 335i
2007+ E92 BMW 328i 335i 335is
2007+ E93 BMW 328i 335i

Show More Show Less

TC Kline Camber Plates - Pair - R5X

T#:23416519

Part#: TCKR56CP

In Stock

$ 335.00 USD

Add to Wish List

Qty

$ 335.00 USD

Add to Wish List

Enhance your Mini's performance with TCKR's high-quality aluminum alloy camber plates, designed for easy adjustment and unparalleled functionality. These camber plates are compatible with most stock or aftermarket struts, including Coil Over configurations, without requiring extra parts. They work seamlessly with various springs like H&R, Vogtland, or Eibach, ensuring improved turn-in without compromising ride comfort.

Compatible with most stock or aftermarket struts, including Coil Over setups
Works with stock or lowering springs like H&R, Vogtland, or Eibach
Significantly improves turn-in without compromising ride comfort
Lightweight and durable aluminum alloy construction with anodized coating
Features a replaceable spherical ball joint for durability
Allows a 1.5-degree range of camber adjustment without affecting toe setting
Enables quick and easy adjustment for both street and track optimization

Show More Show Less

RACEBRACE Strut Brace - 6 Cylinder E46 M3/3-Series

T#:50837389

Part#: RE.RBE46

Special Order: No Guaranteed ETA

$ 379.00 USD

Add to Wish List

Qty

$ 379.00 USD

Add to Wish List

Reinforces the strut towers against deformation while adding valuable triangulation to the front end for sharper, more predictable handling. Designed to prevent “mushrooming” and other distortion caused by rough roads or stiff suspension setups, these plates help maintain consistent suspension geometry by reducing unwanted chassis flex. The result? A more stable, confidence-inspiring front end under load. Strut tower plates are engineered to sit perfectly flush against the towers. If they don’t, it’s a sign the towers have experienced some deformation. In minor cases, this can often be corrected using a block of wood and a hammer to carefully restore the mounting surface.

Show More Show Less

Rogue Engineering V-Brace Chassis Support - E46 M3

T#:12643107

Part#: RE.899

Ships in 10 Business Days

$ 595.00 USD

Add to Wish List

Qty

$ 595.00 USD

Add to Wish List

An integral part on E46 M3 is the rear chassis "V-Brace" (BMW # 33312229899) found on all 2001-06 Convertibles and Coupe (including the CSL). This brace attaches to the outward points of the rear chassis and to the area near the rear subframe carrier. Since some of these vehicles are now over 20 years old, we have been seeing more and more of these start to rust away. We began studying the OEM part, curious as to why they were starting to rust away. We found that the two arms of the "V" are made from 38mm x 12mm (1.5" x 0.5") hollow square steel tubing, pressed ends and welded to a junction plate joining them with welds holding the arms at a specific angle. Since the arms are hollow, it helps keep the overall weight down, but does little to prevent corrosion since it is difficult to paint/coat a hollow tube. A Google search turned up very little other than used ones on eBay and new ones that turned out to be in short supply from the BMW dealer (not surprising since the car is over 20 years old). Determined to make something better, we began our engineering and R&D process. Goals of our Design; Modular design, since packaging and shipping something this large would probably be too expensive Costs would dictate material and manufacturing methods Lighter weight would be a secondary (or tertiary) goal, but also keeping in mind costs Corrosion resistant, so it would not rust from the inside out, like the OEM version After weighing the material, manufacturing and cost options, we decided to go with a fully CNC'd ACQ 6061-T6 aluminum assembly. The concept is to machine two identical arms (one part number) and have them joined with a "junction plate". The arms would be secured to the plate with Grade 8.8 grade hardware and the entire assembly would include replacement Grade 10.9 hardware to replace the original OEM hardware (which is probably original). Details of our Design; CNC'd 6061-T6 construction, secured with Grade 8.8 socket head cap screws. Included are replacement Grade 10.9 hardware to fit in the factory locations. About 4 lbs. fully assembled weight (vs. 6.25 lbs for OEM), about a 35% weight savings Anodized gray finish Modular design allows for one arm to be removed in case of exhaust removal requirement. Included in the Kit Two (2) arms of the brace assembly (they are idential) One (1) junction plate One (1) red spacer (this goes BETWEEN the brace and the chassis!) Two (2) blue spacers (these goes BETWEEN the brace and the chassis!) Four (4), M10 socket head cap screws Three (3), M10 flanged hex head bolts It is recommended that the holes used to mount the V-brace onto the car be cleaned before installation by running an M10x1.5 tap to clean each of the holes.

Show More Show Less

Rogue Engineering - E82/E9X Adjustable Rear Camber Link Set V2.0 ...

T#:35829340

Part#: RE_E9X_CAMNO

Ships in 9 Business Days

$ 595.00 USD

Add to Wish List

Qty

$ 595.00 USD

Add to Wish List

Rogue Engineering E82/E9X Adjustable Rear Camber Link Set V2.0 is the ultimate upgrade for BMW enthusiasts seeking enhanced handling, improved tire wear, and precise suspension tuning. This high-performance solution is engineered to fit BMW E82 1-Series and E9X 3-Series models, offering superior adjustability and durability over OEM components. Ideal for street and track use, this camber link set is crafted from premium materials to ensure strength and long-lasting performance.

Key Features:

These replace the wishbone and guide arm links in the factory suspension which have rubber bushings and limited adjustment. Enhanced suspension adjustability for optimized alignment Improves handling and reduces uneven tire wear Compatible with BMW E82 1-Series and E9X 3-Series models Constructed from high-strength materials for durability and reliability Perfect for both street performance and track applications Turner Motorsport proudly offers the Rogue Engineering E82/E9X Adjustable Rear Camber Link Set V2.0, providing BMW drivers with unmatched performance and precision.

Show More Show Less

Rogue Engineering Adjustable Rear Control Arms

T#:34885415

Part#: RE.ARCA.2.RE

Ships in 9 Business Days

$ 395.00 USD

Add to Wish List

Qty

$ 395.00 USD

Add to Wish List

SPL Titanium Series Adjustable Rear Toe Arms With Eccentric Lockout K...

T#:56001958

Part#: SPLRUAE9XKT2

Ships in 2 Business Days

$ 1,258.00 USD

Add to Wish List

Qty

$ 1,258.00 USD

Add to Wish List

This premium SPL chassis upgrade kit is engineered to anchor your rear axle. Featuring SPL’s Titanium Series Rear Toe Arms with an eccentric lockout kit, alongside a complete 4 piece set of Rear Upper Wishbones and Guide Links

Show More Show Less

OMP Steel Front Tower Brace

T#:54388398

Part#: MA/1869

Special Order: No Guaranteed ETA

$ 199.00 USD

Add to Wish List

Qty

$ 199.00 USD

Add to Wish List

MINI R55 to R59 OMP Steel Front Strut Tower Brace

T#:31291037

Part#: MA/1913

Back Ordered

$ 239.00 USD

Add to Wish List

Qty

$ 239.00 USD

Add to Wish List

MINI R55 to R59 OMP Steel Front Strut Tower Brace is designed to enhance the performance and handling of the MINI Cooper by reducing body roll and torsion. Constructed from high-strength steel and painted red, this strut tower brace features an adjustable bar that mounts securely to the strut towers using the stock hardware. It is engineered to clear the stock air box, ensuring a seamless fit without interference. Please note that this brace will not fit the MINI Cooper JCW GP2 without modifications to the strut mount bolt holes.

Key benefits of the MINI R55 to R59 OMP Steel Front Strut Tower Brace include:

Enhanced Performance: Reduces body roll and torsion for improved handling.
Durable Construction: Made from high-strength steel and painted red.
Adjustable Fit: Features an adjustable bar for a precise fit.
Clearance: Designed to clear the stock air box.
Easy Installation: Utilizes stock hardware for straightforward installation.

Show More Show Less

OMP Steel Front Brace - Lower

T#:54388399

Part#: MA/1870

Back Ordered

$ 149.00 USD

Add to Wish List

Qty

$ 149.00 USD

Add to Wish List

Engineered for the enthusiast who demands precise cornering and razor-sharp feedback, this Performance Lower Front Brace is your ticket to a more connected driving experience.

Select Vehicle

Purpose

Category

Home

Suspension

Brand

View All Brands

Price

Special Offers

Shipping