BMW Suspension Parts

Rear Shock Mounts (RSM) - Upper - OEM Rubber - E82, E9X (non-M) (Pair...

T#:11986

Part#: E9X-URSM

In Stock

Sale - Save 2% $ 49.12

This product was last offered at the strikethrough price on
05-03-2026

$ 48.01 USD

Add to Wish List

Qty

Sale - Save 2%

$ 49.12

This product was last offered at the strikethrough price on
05-03-2026

$ 48.01 USD

Add to Wish List

A 4-piece set of new OEM rear upper and lower shock mounts to complete your shock install or replace broken mounts (RSM). The top mounts on the shocks for the E82 and E90/E91/E92/E93 consist of 4 pieces. These E9X URSM pieces fit all E82 and E9X except the M3 with EDC.

Rear Shock Mount (RSM) Kit consists of:
A. rear upper-top shock mounts, 33506771737
B. rear upper-middle shock mounts, 33506767010
C. rear upper-bottom shock mounts, 33506771738
D. rear upper supporting cup, 33526764418 (sits over bumpstop)
There is also a lower mount that is available separately. This package covers only the rear upper shock mounts.

That's a lot of rubber that takes constant deflecting and absorbing of cornering forces and impacts from bumps, potholes, etc. Replacing the RSMs is key to maintaining a quiet and comfortable ride. Price is for all 4 upper pieces for BOTH sides of the car.

This item fits the following BMWs:
2006-2011 E90 BMW 325i 325xi 328i 328xi 328i xDrive 330i 330xi 335d 335i 335xi 335i xDrive - Sedan
2006-2011 E91 BMW 325xi 328i 328xi 328i xDrive - Wagon
2007-2012 E92 BMW 328i 328xi 328i xDrive 335i 335is 335xi 335i xDrive - Coupe
2007-2012 E93 BMW 328i 335i - Convertible

Show More Show Less

Rear Subframe Bushings/Mount Set - Rubber - E46 M3, Z4 M

T#:2051

Part#: TMS2051

In Stock

$ 291.99 USD

Add to Wish List

Qty

$ 291.99 USD

Add to Wish List

Any subframe work or reinforcement project on the rear of the E46 M3 should include a new set of subframe mounts. It's the worn rubber bushings that contribute to failed rear subframes on the E46 (but not the only reason). As the rubber gets worn, there is more flex to the mount. This flexing is then transferred to the sheetmetal in the floor where the spot welds will pop and the sheetmetal will crack. Additional force coming from stiffer suspensions and stickier tires will only increase the flexing of the mounts/chassis.

Of course, stiffer mounts would help prevent this problem but with a stiffer bushing comes ride harshness, vibration, and additional noise. Our engineers and technicians recommend replacement with the factory rubber bushings (along with the appropriate reinforcement of the floor). The rubber bushings help isolate bumps and impacts and are quiet. They are also a perfect fitment and require no maintenance.

This item is a set of 4 Original BMW rubber subframe mounts. Individual part numbers - 33 31 2 283 573 (left front), 33 31 2 283 574 (right front), and 33 31 2 283 419 (left and right rear, x 2).

Applications:
2001-2006 E46 M3, M3 CSL coupe, convertible
2007-up Z4 M Roadster, M Coupe

Show More Show Less

Burger Motorsports Billet Strut Cross Braces - Blue - G20 M340i 330i,...

T#:637422

Part#: BMSG20BSCB-BLUE

Ships on Aug 31, 2026

$ 199.00 USD

Add to Wish List

Qty

$ 199.00 USD

Add to Wish List

Constructed from lightweight billet aluminum with the BMS logo engraved on the top middle. These strut braces are a solid one-piece design. These give an exclusive look under the hood and extra stabilization to the chassis.

Show More Show Less

Burger Motorsports Billet Strut Cross Braces - Red - G20 M340i 330i, ...

T#:637421

Part#: BMSG20BSCB-RED

Ships on Aug 31, 2026

$ 199.00 USD

Add to Wish List

Qty

$ 199.00 USD

Add to Wish List

Constructed from lightweight billet aluminum with the BMS logo engraved on the top middle. These strut braces are a solid one-piece design. These give an exclusive look under the hood and extra stabilization to the chassis.

Show More Show Less

BMS Billet Strut Cross Braces - Anodized Blue - BMW G01 X3, G02 X4, F...

T#:39126850

Part#: BMSBILSCB-BLU

In Stock

$ 249.00 USD

Add to Wish List

Qty

$ 249.00 USD

Add to Wish List

Burger Motorsports' Billet Strut Cross Braces are designed and made in the USA from billet aluminum in a solid one-piece design. These braces connect from the strut towers to the front radiator support, helping to reinforce your entire front end while also giving your BMW an exclusive under-hood appearance.

Show More Show Less

Burger Motorsports Billet Strut Cross Braces - Black - G20 M340i 330i...

T#:637424

Part#: BMSG20BSCB-BLK

Ships in 8 Business Days

$ 199.00 USD

Add to Wish List

Qty

$ 199.00 USD

Add to Wish List

Constructed from lightweight billet aluminum with the BMS logo engraved on the top middle. These strut braces are a solid one-piece design. These give an exclusive look under the hood and extra stabilization to the chassis.

Show More Show Less

AFe CONTROL Front Suspension Strut Brace

T#:14155783

Part#: 450-502003-G

In Stock at Vendor

Sale - Save 5% $ 354.00

This product was last offered at the strikethrough price on
08-03-2026

$ 336.30 USD

Add to Wish List

Qty

Sale - Save 5%

$ 354.00

This product was last offered at the strikethrough price on
08-03-2026

$ 336.30 USD

Add to Wish List

Stiffen your chassis with this AFE Chassis brace giving you more control over your vehicle! Reducing chassis flex will let your suspension do its job better than before giving you better control and contact to the road.

Show More Show Less

BMS Billet Strut Cross Braces - Anodized Black - BMW G01 X3, G02 X4, ...

T#:39126853

Part#: BMSBILSCB-BLK

Ships on Aug 31, 2026

$ 249.00 USD

Add to Wish List

Qty

$ 249.00 USD

Add to Wish List

Burger Motorsports' Billet Strut Cross Braces are designed and made in the USA from billet aluminum in a solid one-piece design. These braces connect from the strut towers to the front radiator support, helping to reinforce your entire front end while also giving your BMW an exclusive under-hood appearance.

Show More Show Less

Burger Motorsports Billet Strut Cross Braces - Silver - G20 M340i 330...

T#:637423

Part#: BMSG20BSCB-SIL

Ships on Aug 31, 2026

$ 255.99 USD

Add to Wish List

Qty

$ 255.99 USD

Add to Wish List

Constructed from lightweight billet aluminum with the BMS logo engraved on the top middle. These strut braces are a solid one-piece design. These give an exclusive look under the hood and extra stabilization to the chassis.

Show More Show Less

Billet Strut Cross Braces For G30 G14 G15 G16

T#:27138580

Part#: BMSG30SB

Ships on Aug 28, 2026

Starting at $ 249.00 USD

Add to Wish List

Starting at $ 249.00 USD

Add to Wish List

The Burger Motorsports Billet Strut Cross Braces for the G30, G14, G15, and G16 are designed and made in the USA from lightweight billet aluminum with the BMS logo engraved on the top middle. These strut braces are a solid one-piece design. These give an exclusive look under the hood and extra stabilization to the chassis. Easy 5-minute install. Simply remove your factory strut braces and replace them with the BMS units for better structural integrity and amazing looks under the hood. Sold in pairs. Available in Black, Silver, Blue, and Red anodized. Single-piece design made from a solid block of billet aluminum Improved chassis rigidity and structural integrity Decreased chassis flex during cornering Utilizes stock mounting bolts Direct bolt-on replacement. No drilling required Made in the USA

Show More Show Less

aFe Control Adjustable Sway Bar End Links - Front & Rear - F80 M3, F8...

T#:825812

Part#: 442-502001-L

Ships in 4 Business Days

Sale - Save 5% $ 522.00

This product was last offered at the strikethrough price on
08-03-2026

$ 495.90 USD

Add to Wish List

Qty

Sale - Save 5%

$ 522.00

This product was last offered at the strikethrough price on
08-03-2026

$ 495.90 USD

Add to Wish List

Improve handling and eliminate sway bar preload with aFe Control’s adjustable end links. Sway bar preload is a scenario where your sway bar is in tension when your car is at rest. Sway bar preload affect’s how the vehicle handles making it stiffer when turning one direction versus the other. Factors like lowering springs can end up with uneven suspension heights which can lead to sway bar preload. If you have adjustable coilovers and are corner balancing the vehicle, it is especially important to zero out your sway bar preload to get consistent handling. Made with high-quality Aurora rod ends and precision machined adjusters, these end links will make short work of dialing in your suspension. Joint articulation was designed to exceed factory range which prevents binding during operation. Equipped with right-hand and left-hand rod ends, the end links can be adjusted on-car without removal. Whether you’re setting your car up for the street or track, aFe Control will get you there! Billet Aluminum Adjusters: aFe's adjusters are CNC machined out of 6061-T6 aluminum and anodized blue with laser etched logo. Quality Rod Ends: For superior quality and reliability, aFe uses PTFE-lined Aurora rod ends. Emissions Disclaimer: This product does not require a CARB EO#.

Show More Show Less

Front AFe Control Sway Bar -- F80 F82 F83 F87 BMW

T#:384468

Part#: 440-503001FN

Ships in 4 Business Days

Sale - Save 5% $ 410.00

This product was last offered at the strikethrough price on
08-03-2026

$ 389.50 USD

Add to Wish List

Qty

Sale - Save 5%

$ 410.00

This product was last offered at the strikethrough price on
08-03-2026

$ 389.50 USD

Add to Wish List

The aFe Control Front Sway Bar is a great upgrade option for your high performance BMW. Its tubular design is stiff but balanced to keep your car flat and neutral in tight turns. CNC bending and CNC machined and TIG welded bar ends plus a 2-stage powder coated finish makes this bar very high quality and durable enough to withstand years of abuse and still look great. Included are CNC machined 6061-T6 sway bushing brackets that are anodized black and polyurethane bushings.

Show More Show Less

AFe Control Sway Bar Set - E90/2 M3

T#:394560

Part#: 440-503006-N

In Stock at Vendor

Sale - Save 5% $ 719.00

This product was last offered at the strikethrough price on
08-03-2026

$ 683.05 USD

Add to Wish List

Qty

Sale - Save 5%

$ 719.00

This product was last offered at the strikethrough price on
08-03-2026

$ 683.05 USD

Add to Wish List

The aFe Control Sway Bar Set is a great upgrade option for your high performance BMW. Its front and rear, tubular design is stiff but balanced to keep your car flat and neutral in tight turns. CNC bent bars and CNC machined and TIG welded bar ends plus a 2-stage powder coated finish make these bars very high quality and durable enough to withstand years of abuse and still look great. Included are CNC machined 6061-T6 rear sway bushing brackets that are anodized black and polyurethane bushings.

Product Features:

CNC Bent, Lightweight Tubular Alloy Steel 32mm Front, 29mm Rear Sway Bars
2 Position, CNC Machined, TIG Welded Bar Ends
Includes Polyurethane Bushings and CNC Machined 6061-T6 Aluminum Brackets (Rear)
2 Stage Tangerine Orange, Powder-coated Finish
Direct Fit Installation, Requires No Modifications

Fits the following BMWs:
2008-2013 E90/2 BMW M3

Show More Show Less

aFe Control Sway Bar Set -- F80 F82 F83 F87 BMW

T#:384467

Part#: 440-503001-N

Back Ordered

Sale - Save 5% $ 719.00

This product was last offered at the strikethrough price on
08-03-2026

$ 683.05 USD

Add to Wish List

Qty

Sale - Save 5%

$ 719.00

This product was last offered at the strikethrough price on
08-03-2026

$ 683.05 USD

Add to Wish List

The aFe Control Sway Bar Set is a great upgrade option for your high performance BMW. Its front and rear tubular design is stiff but balanced to keep your car flat and neutral in tight turns. CNC bent bars and CNC machined and TIG welded bar ends plus a 2-stage powder coated finish make these bars very high quality and durable enough to withstand years of abuse and still look great. Included are CNC machined 6061-T6 sway bushing brackets that are anodized black and polyurethane bushings.

Show More Show Less

aFe CONTROL Front Sway Bar - E90 E92 E93 M3

T#:557620

Part#: 440-503006FN

Back Ordered

Sale - Save 5% $ 468.00

This product was last offered at the strikethrough price on
08-03-2026

$ 444.60 USD

Add to Wish List

Qty

Sale - Save 5%

$ 468.00

This product was last offered at the strikethrough price on
08-03-2026

$ 444.60 USD

Add to Wish List

Looking to reduce body roll and improve your handling? it turns out that aFe knows a thing or two about making your car handle. Not content to just offer air intake systems, aFe offers suspension components as well. These CNC-bent, powdercoated tubular aluminum sway bars are both lightweight and stiffer than stock. Each bar includes new polyurethane sway bar bushings and machined aluminum brackets.

Fits the Following BMWs:

E90 E92 E92 M3

Show More Show Less

AFe Control Sway Bar Set - E90/2 335i 2007-2013

T#:394559

Part#: 440-503003-N

Back Ordered

Sale - Save 5% $ 719.00

This product was last offered at the strikethrough price on
08-03-2026

$ 683.05 USD

Add to Wish List

Qty

Sale - Save 5%

$ 719.00

This product was last offered at the strikethrough price on
08-03-2026

$ 683.05 USD

Add to Wish List

The aFe Control Sway Bar Set is a great upgrade option for your high performance BMW. Its front and rear 2-way adjustable, tubular design is stiff but balanced to keep your car flat and neutral in tight turns. CNC bent bars and CNC machined and TIG welded bar ends plus a 2-stage powder coated finish make these bars very high quality and durable enough to withstand years of abuse and still look great. Included are CNC machined 6061-T6 rear sway bushing brackets that are anodized black and polyurethane bushings.

Product Features:

CNC Bent, Lightweight Tubular Alloy Steel 32mm Front, 29mm Rear Sway Bars
2 Position Adjustable, CNC Machined, TIG Welded Bar Ends
Includes Polyurethane Bushings and CNC Machined 6061-T6 Aluminum Brackets (Rear)
2 Stage Tangerine Orange, Powder-coated Finish
Direct Fit Installation, Requires No Modifications

Fits the following BMWs:
2007-2013 E90/2 BMW 335i

Show More Show Less

aFe Control Adjustable Sway Bar End Links - Rear - F80 M3, F82/83 M4,...

T#:825813

Part#: 442-502001RL

Ships in 4 Business Days

Sale - Save 5% $ 257.00

This product was last offered at the strikethrough price on
08-03-2026

$ 244.15 USD

Add to Wish List

Qty

Sale - Save 5%

$ 257.00

This product was last offered at the strikethrough price on
08-03-2026

$ 244.15 USD

Add to Wish List

Improve handling and eliminate sway bar preload with aFe Control’s adjustable end links. Sway bar preload is a scenario where your sway bar is in tension when your car is at rest. Sway bar preload affect’s how the vehicle handles making it stiffer when turning one direction versus the other. Factors like lowering springs can end up with uneven suspension heights which can lead to sway bar preload. If you have adjustable coilovers and are corner balancing the vehicle, it is especially important to zero out your sway bar preload to get consistent handling. Made with high-quality Aurora rod ends and precision machined adjusters, these end links will make short work of dialing in your suspension. Joint articulation was designed to exceed factory range which prevents binding during operation. Equipped with right-hand and left-hand rod ends, the end links can be adjusted on-car without removal. Whether you’re setting your car up for the street or track, aFe Control will get you there! Billet Aluminum Adjusters: aFe's adjusters are CNC machined out of 6061-T6 aluminum and anodized blue with laser etched logo. Quality Rod Ends: For superior quality and reliability, aFe uses PTFE-lined Aurora rod ends. Emissions Disclaimer: This product does not require a CARB EO#.

Show More Show Less

Burger Motorsports Billet Strut Cross Braces - Silver - BMW G22/G23/G...

T#:46924997

Part#: G22BSCB-SIL

Ships on Aug 31, 2026

$ 199.00 USD

Add to Wish List

Qty

$ 199.00 USD

Add to Wish List

Burger Motorsports' strut braces are CNC machined from thick, lightweight billet aluminum with the BMS logo engraved on the top middle. These strut braces are a thick, solid one-piece design and give an exclusive look under the hood and extra stabilization to the chassis.

Show More Show Less

aFe Control Lowering Springs - F3X 328/330i 428/430, F22/23 228/230i ...

T#:557613

Part#: 410-503005-N

Ships in 4 Business Days

Sale - Save 5% $ 365.00

This product was last offered at the strikethrough price on
08-03-2026

$ 346.75 USD

Add to Wish List

Qty

Sale - Save 5%

$ 365.00

This product was last offered at the strikethrough price on
08-03-2026

$ 346.75 USD

Add to Wish List

Eliminate the stock fender gap - works great with stock shocks!

Burger Motorsports Billet Strut Cross Braces - Black - BMW G22/G23/G2...

T#:46924999

Part#: G22BSCB-BLK

Ships on Aug 31, 2026

$ 199.00 USD

Add to Wish List

Qty

$ 199.00 USD

Add to Wish List

Burger Motorsports' strut braces are CNC machined from thick, lightweight billet aluminum with the BMS logo engraved on the top middle. These strut braces are a thick, solid one-piece design and give an exclusive look under the hood and extra stabilization to the chassis.

Show More Show Less

Burger Motorsports Billet Strut Cross Braces - Blue - BMW G22/G23/G26...

T#:46924998

Part#: G22BSCB-BLU

Ships on Aug 31, 2026

$ 199.00 USD

Add to Wish List

Qty

$ 199.00 USD

Add to Wish List

Burger Motorsports' strut braces are CNC machined from thick, lightweight billet aluminum with the BMS logo engraved on the top middle. These strut braces are a thick, solid one-piece design and give an exclusive look under the hood and extra stabilization to the chassis.

Show More Show Less

Burger Motorsports Billet Strut Cross Braces - Red - BMW G22/G23/G26 ...

T#:46924996

Part#: G22BSCB-RED

Ships on Aug 31, 2026

$ 199.00 USD

Add to Wish List

Qty

$ 199.00 USD

Add to Wish List

Burger Motorsports' strut braces are CNC machined from thick, lightweight billet aluminum with the BMS logo engraved on the top middle. These strut braces are a thick, solid one-piece design and give an exclusive look under the hood and extra stabilization to the chassis.

Show More Show Less

BMS Billet Strut Cross Braces - Anodized Silver - BMW G01 X3, G02 X4,...

T#:39126854

Part#: BMSBILSCB-SIL

Ships on Aug 31, 2026

$ 249.00 USD

Add to Wish List

Qty

$ 249.00 USD

Add to Wish List

Burger Motorsports' Billet Strut Cross Braces are designed and made in the USA from billet aluminum in a solid one-piece design. These braces connect from the strut towers to the front radiator support, helping to reinforce your entire front end while also giving your BMW an exclusive under-hood appearance.

Show More Show Less

AFe Control Variable Height Springs - F80/F82/F87 M2 M3 M4

T#:391133

Part#: 415-503001-N

Ships in 4 Business Days

Sale - Save 5% $ 1,099.00

This product was last offered at the strikethrough price on
08-03-2026

$ 1,044.05 USD

Add to Wish List

Qty

Sale - Save 5%

$ 1,099.00

This product was last offered at the strikethrough price on
08-03-2026

$ 1,044.05 USD

Add to Wish List

Designed and engineered in the US, aFe's Control Variable Height Springs (VHS) now allow you the adjustability of coil-over systems while allowing you to retaining your EDC ride selection. These springs are built to optimize your factory shock absorber dampening and is 100% compatible with stock suspension after a slight bit of modification. The only modifications to the vehicle are the removal of the spring seat on the stock front shocks and replacing them with the TIG welded and Zinc coated VHS coil-over sleeves. These sleeves have mounting points for the OEM accelerometers and sway bar.

Show More Show Less

aFe Control Lowering Springs BMW M3 (E90/92) 08-13

T#:557614

Part#: 410-503006-N

Ships in 4 Business Days

$ 376.00 USD

Add to Wish List

Qty

$ 376.00 USD

Add to Wish List

Eliminate the stock fender gap - works great with stock shocks!

BMS Billet Strut Cross Braces - Anodized Red - BMW G01 X3, G02 X4, F9...

T#:39126852

Part#: BMSBILSCB-RED

Ships on Aug 31, 2026

$ 249.00 USD

Add to Wish List

Qty

$ 249.00 USD

Add to Wish List

Burger Motorsports' Billet Strut Cross Braces are designed and made in the USA from billet aluminum in a solid one-piece design. These braces connect from the strut towers to the front radiator support, helping to reinforce your entire front end while also giving your BMW an exclusive under-hood appearance.

Show More Show Less

Rear AFe Control Sway Bar -- F80 F82 F83 F87 BMW

T#:384469

Part#: 440-503001RN

Ships in 4 Business Days

Sale - Save 5% $ 410.00

This product was last offered at the strikethrough price on
08-03-2026

$ 389.50 USD

Add to Wish List

Qty

Sale - Save 5%

$ 410.00

This product was last offered at the strikethrough price on
08-03-2026

$ 389.50 USD

Add to Wish List

The aFe Control Rear Sway Bar is a great upgrade option for your high performance BMW. Its tubular design is stiff but balanced to keep your car flat and neutral in tight turns. CNC bending and CNC machined and TIG welded bar ends plus a 2-stage powder coated finish makes this bar very high quality and durable enough to withstand years of abuse and still look great. Included are CNC machined 6061-T6 sway bushing brackets that are anodized black and polyurethane bushings.

Show More Show Less

aFe Control Rear Sway Bar

T#:584532

Part#: 440-503002RN

Ships in 4 Business Days

Sale - Save 5% $ 410.00

This product was last offered at the strikethrough price on
08-03-2026

$ 389.50 USD

Add to Wish List

Qty

Sale - Save 5%

$ 410.00

This product was last offered at the strikethrough price on
08-03-2026

$ 389.50 USD

Add to Wish List

Rear Sway Bar for F8X 335i/435i

aFe Control Adjustable Sway Bar End Links - Front - F80 M3, F82/83 M4...

T#:825814

Part#: 442-502001FL

Ships in 4 Business Days

Sale - Save 5% $ 285.00

This product was last offered at the strikethrough price on
08-03-2026

$ 270.75 USD

Add to Wish List

Qty

Sale - Save 5%

$ 285.00

This product was last offered at the strikethrough price on
08-03-2026

$ 270.75 USD

Add to Wish List

Improve handling and eliminate sway bar preload with aFe Control’s adjustable end links. Sway bar preload is a scenario where your sway bar is in tension when your car is at rest. Sway bar preload affect’s how the vehicle handles making it stiffer when turning one direction versus the other. Factors like lowering springs can end up with uneven suspension heights which can lead to sway bar preload. If you have adjustable coilovers and are corner balancing the vehicle, it is especially important to zero out your sway bar preload to get consistent handling. Made with high-quality Aurora rod ends and precision machined adjusters, these end links will make short work of dialing in your suspension. Joint articulation was designed to exceed factory range which prevents binding during operation. Equipped with right-hand and left-hand rod ends, the end links can be adjusted on-car without removal. Whether you’re setting your car up for the street or track, aFe Control will get you there! Billet Aluminum Adjusters: aFe's adjusters are CNC machined out of 6061-T6 aluminum and anodized blue with laser etched logo. Quality Rod Ends: For superior quality and reliability, aFe uses PTFE-lined Aurora rod ends. Emissions Disclaimer: This product does not require a CARB EO#.

Show More Show Less

aFe Control Front Sway Bar

Does not fit xDrive models

T#:557616

Part#: 440-503002FN

Ships in 4 Business Days

Sale - Save 5% $ 410.00

This product was last offered at the strikethrough price on
08-03-2026

$ 389.50 USD

Add to Wish List

Qty

Sale - Save 5%

$ 410.00

This product was last offered at the strikethrough price on
08-03-2026

$ 389.50 USD

Add to Wish List

Front Sway Bar for F8X 335i/435i

aFe Control Lowering Springs -- F30 335i (2012-2015), F32 435i (2014-...

T#:388106

Part#: 410-503002-N

Ships in 4 Business Days

Sale - Save 5% $ 365.00

This product was last offered at the strikethrough price on
08-03-2026

$ 346.75 USD

Add to Wish List

Qty

Sale - Save 5%

$ 365.00

This product was last offered at the strikethrough price on
08-03-2026

$ 346.75 USD

Add to Wish List

Designed and engineered in the US, aFe's Control Lowering springs provide ample lowering for performance and appearance, while still maintaining a level of comfort for daily driven needs. These springs are built to optimize your factory shock absorber dampening and is 100% compatible with your EDC ride control. No modifications to the vehicle are necessary, the aFe Control Lowering Springs are a direct fit application. To go along with superb handling, their looks and overall quality follow suit. 2-Stage powder coating ensures that they will continue to look great after plenty of abuse. Street and track testing prove these springs to have great longevity, durability, and material quality.

Product Features:

Engineered to optimize the factory shock absorber damping, including selective ride
1" drop for the correct relation between looks and proper function
Engineered, designed and race tested to ensure the ultimate in quality and longevity
2 Stage, high luster, tangerine orange powder-coated finish for unbeatable looks and durability
Direct Fit Installation

Vehicle Fitment:
2012-2015 F30 BMW 335i
2014-2015 F32 BMW 435i

Show More Show Less

BMS Billet Strut Cross Braces - G29 BMW Z4

T#:27138575

Part#: BMSZ4SB

Ships on Aug 28, 2026

Starting at $ 249.00 USD

Add to Wish List

Starting at $ 249.00 USD

Add to Wish List

The Burger Motorsports Billet Strut Cross Braces for the 2019+ G29 BMW Z4 are designed and made in the USA from lightweight billet aluminum with the BMS logo engraved on the top middle. These strut braces are a solid one-piece design. These give an exclusive look under the hood and extra stabilization to the chassis. Easy 5-minute install. Simply remove your factory strut braces and replace them with the BMS units for better structural integrity and amazing looks under the hood. Sold in pairs. Available in Black, Silver, Blue, and Red anodized. The perfect addition to your G29 BMW Z4 engine bay Single-piece design made from a solid block of billet aluminum Improved chassis rigidity and structural integrity Decreased chassis flex during cornering Utilizes stock mounting bolts Direct bolt-on replacement. No drilling required Made in the USA

Show More Show Less

aFe CONTROL Front Suspension Brace Set - Raw Stainless Steel Finish -...

T#:4840538

Part#: 450-721003-A

Ships in 4 Business Days

Sale - Save 5% $ 285.00

This product was last offered at the strikethrough price on
08-03-2026

$ 270.75 USD

Add to Wish List

Qty

Sale - Save 5%

$ 285.00

This product was last offered at the strikethrough price on
08-03-2026

$ 270.75 USD

Add to Wish List

Stiffen up your chassis and give your engine bay a unique look with aFe's Control fabricated Strut Braces (also known as Strut Tower Brace or STB). Made with 14-gauge steel, the I-beam design is meticulously TIG welded to form a lightweight, strong brace that will increase front-end rigidity, thus improving turn-in response. aFe Control Suspension products are engineered and manufactured in their Corona, California manufacturing facility. Features: Laser Cut, 14-Gauge 304 Stainless Steel TIG Welded I-Beam Design Grade 5 Burnt Blue Titanium Mounting Bolts Fits All Supra Models Direct-Fit Installation Requires No Modifications Proudly Made in the USA

Show More Show Less

aFe CONTROL Front Suspension Brace Set - Red Powder Coat Finish - Toy...

T#:4840541

Part#: 450-721003-R

In Stock at Vendor

Sale - Save 5% $ 262.00

This product was last offered at the strikethrough price on
08-03-2026

$ 248.90 USD

Add to Wish List

Qty

Sale - Save 5%

$ 262.00

This product was last offered at the strikethrough price on
08-03-2026

$ 248.90 USD

Add to Wish List

Stiffen up your chassis and give your engine bay a unique look with aFe's Control fabricated Strut Braces (also known as Strut Tower Brace or STB). Made with 14-gauge steel, the I-beam design is meticulously TIG welded to form a lightweight, strong brace that will increase front-end rigidity, thus improving turn-in response. aFe Control Suspension products are engineered and manufactured in their Corona, California manufacturing facility. Features: Laser Cut, 14-Gauge Steel TIG Welded I-Beam Design Grade 5 Burnt Blue Titanium Mounting Bolts Durable Textured Red Powder Coat Fits All Supra Models Direct-Fit Installation Requires No Modifications Proudly Made in the USA

Show More Show Less

AFe Control Lowering Springs - F87 M2

T#:391135

Part#: 410-503009-N

Ships in 4 Business Days

Sale - Save 5% $ 376.00

This product was last offered at the strikethrough price on
08-03-2026

$ 357.20 USD

Add to Wish List

Qty

Sale - Save 5%

$ 376.00

This product was last offered at the strikethrough price on
08-03-2026

$ 357.20 USD

Add to Wish List

Designed and engineered in the US, aFe's Control Lowering springs provide ample lowering for performance and appearance, while still maintaining a level of comfort for daily driven needs. These springs are built to optimize your factory shock absorber dampening and is 100% compatible with your EDC ride control. No modifications to the vehicle are necessary, the aFe Control Lowering Springs are a direct fit application. To go along with superb handling, their looks and overall quality follow suit. 2-Stage powder coating ensures that they will continue to look great after plenty of abuse. Street and track testing prove these springs to have great longevity, durability, and material quality.

Product Features:

Engineered to optimize the factory shock absorber damping, including selective ride
1" drop for the correct relation between looks and proper function
Engineered, designed and race tested to ensure the ultimate in quality and longevity
2 Stage, high luster, tangerine orange powder-coated finish for unbeatable looks and durability
Direct Fit Installation

Vehicle Fitment:

2016+ F87 BMW M2

Show More Show Less

aFe CONTROL Front Suspension Brace Set - Blue Powder Coat Finish - To...

T#:4840540

Part#: 450-721003-L

Ships in 4 Business Days

Sale - Save 5% $ 262.00

This product was last offered at the strikethrough price on
08-03-2026

$ 248.90 USD

Add to Wish List

Qty

Sale - Save 5%

$ 262.00

This product was last offered at the strikethrough price on
08-03-2026

$ 248.90 USD

Add to Wish List

Stiffen up your chassis and give your engine bay a unique look with aFe's Control fabricated Strut Braces (also known as Strut Tower Brace or STB). Made with 14-gauge steel, the I-beam design is meticulously TIG welded to form a lightweight, strong brace that will increase front-end rigidity, thus improving turn-in response. aFe Control Suspension products are engineered and manufactured in their Corona, California manufacturing facility. Features: Laser Cut, 14-Gauge Steel TIG Welded I-Beam Design Grade 5 Burnt Blue Titanium Mounting Bolts Durable Blue Powder Coat Fits All Supra Models Direct-Fit Installation Requires No Modifications Proudly Made in the USA

Show More Show Less

aFe CONTROL Front Suspension Brace Set - Black Powder Coat Finish - T...

T#:4840539

Part#: 450-721003-B

Ships in 4 Business Days

Sale - Save 5% $ 262.00

This product was last offered at the strikethrough price on
08-03-2026

$ 248.90 USD

Add to Wish List

Qty

Sale - Save 5%

$ 262.00

This product was last offered at the strikethrough price on
08-03-2026

$ 248.90 USD

Add to Wish List

Stiffen up your chassis and give your engine bay a unique look with aFe's Control fabricated Strut Braces (also known as Strut Tower Brace or STB). Made with 14-gauge steel, the I-beam design is meticulously TIG welded to form a lightweight, strong brace that will increase front-end rigidity, thus improving turn-in response. aFe Control Suspension products are engineered and manufactured in their Corona, California manufacturing facility. Features: Laser Cut, 14-Gauge Steel TIG Welded I-Beam Design Grade 5 Burnt Blue Titanium Mounting Bolts Durable Wrinkle Black Powder Coat Fits All Supra Models Direct-Fit Installation Requires No Modifications Proudly Made in the USA

Show More Show Less

SPL Titanium Series Adjustable Rear Toe Arms With Eccentric Lockout K...

T#:56001958

Part#: SPLRUAE9XKT2

Ships in 2 Business Days

$ 1,258.00 USD

Add to Wish List

Qty

$ 1,258.00 USD

Add to Wish List

This premium SPL chassis upgrade kit is engineered to anchor your rear axle. Featuring SPL’s Titanium Series Rear Toe Arms with an eccentric lockout kit, alongside a complete 4 piece set of Rear Upper Wishbones and Guide Links

Show More Show Less

aFe CONTROL Front Sway Bar BMW 335i (E90/92) 07-13

T#:557618

Part#: 440-503003FN

Ships in 4 Business Days

Sale - Save 5% $ 410.00

This product was last offered at the strikethrough price on
08-03-2026

$ 389.50 USD

Add to Wish List

Qty

Sale - Save 5%

$ 410.00

This product was last offered at the strikethrough price on
08-03-2026

$ 389.50 USD

Add to Wish List

aFe CONTROL Rear Sway Bar - E90 E92 E93 335i

T#:557619

Part#: 440-503003RN

Back Ordered

Sale - Save 5% $ 410.00

This product was last offered at the strikethrough price on
08-03-2026

$ 389.50 USD

Add to Wish List

Qty

Sale - Save 5%

$ 410.00

This product was last offered at the strikethrough price on
08-03-2026

$ 389.50 USD

Add to Wish List

Looking to reduce body roll and improve your handling? it turns out that aFe knows a thing or two about making your car handle. Not content to just offer air intake systems, aFe offers suspension components as well. These CNC-bent, powdercoated tubular aluminum sway bars are both lightweight and stiffer than stock. Each bar includes new polyurethane sway bar bushings and machined aluminum brackets.

Fits the Following BMWs:

E90 E92 E92 335i 335xi

Show More Show Less

aFe Control Featherlight Single Adjustable Coilover System -- F80 F82...

T#:384465

Part#: 430-503001-N

Back Ordered

Sale - Save 5% $ 3,729.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 3,542.55 USD

Add to Wish List

Qty

Sale - Save 5%

$ 3,729.00

This product was last offered at the strikethrough price on
08-03-2026

$ 3,542.55 USD

Add to Wish List

The aFe Control Featherlight Single Adjustable Coilover System is the perfect option for changing out your standard (Non-EDC) shocks and struts to a 24-way adjustable system, allowing anything from a comfortable street feel to aggressive track settings. Adjustments to the the rebound and compression are made easy thanks to their inverted mono-tube design placing the adjustment knobs on the bottom of the shocks. Standard, easy to adjust threading and spring seats allow you to adjust the front and rear ride height with little effort and time. Thanks to 36mm high strength hard chromed strut shafts house and double digressive valving in the front shocks, these work smoothly and bind-free under high braking and cornering conditions. The rear shocks feature the CIRC (Concentric Integrated Remote Canister) system that more than triples the gas volume over a standard coilover resulting in consistent operation over a wide temperature range and throughout the stroke. In and out, these shocks have been developed for the track and refined for the street.

Show More Show Less

aFe CONTROL Rear Sway Bar - E90 E92 E93 M3

T#:557621

Part#: 440-503006RN

Back Ordered

Sale - Save 5% $ 410.00

This product was last offered at the strikethrough price on
08-03-2026

$ 389.50 USD

Add to Wish List

Qty

Sale - Save 5%

$ 410.00

This product was last offered at the strikethrough price on
08-03-2026

$ 389.50 USD

Add to Wish List

Looking to reduce body roll and improve your handling? it turns out that aFe knows a thing or two about making your car handle. Not content to just offer air intake systems, aFe offers suspension components as well. These CNC-bent, powdercoated tubular aluminum sway bars are both lightweight and stiffer than stock. Each bar includes new polyurethane sway bar bushings and machined aluminum brackets.

Fits the Following BMWs:

E90 E92 E92 M3

Show More Show Less

Project Cars

SELECT YOUR BMW

Sub-Categories

Select Vehicle

Purpose

Category

Brand

Price

Special Offers

Shipping

Narrow Results