Find Parts That Fit Your Vehicle

BMW Suspension Parts

Your BMW's handling is determined by the capabilities and age of your suspension components. Our selected aftermarket performance suspension like coilovers, lowering springs, cup kits, and dampers can improve the handling of your BMW dramatically. With those upgrades comes the needs for proper adjustment; our recommended supporting modifications comes stiffer sway bars, bushings, and adjustable camber/caster plates, to name a few found on this page. Completely build your suspension for the most competitive BMW driving experience, achieve your perfect look, or simply replace your worn suspension with our recommended parts.

Sub-Categories

Sort By:

Burger Motorsports - Corporate Logo
T#:637422
Part#: BMSG20BSCB-BLUE
Ships on Sep 1, 2026
$ 199.00 USD
Free Shipping on orders $49 and up
Constructed from lightweight billet aluminum with the BMS logo engraved on the top middle. These strut braces are a solid one-piece design. These give an exclusive look under the hood and extra stabilization to the chassis.
Show More Show Less
Burger Motorsports - Corporate Logo
T#:637421
Part#: BMSG20BSCB-RED
Ships on Sep 1, 2026
$ 199.00 USD
Free Shipping on orders $49 and up
Constructed from lightweight billet aluminum with the BMS logo engraved on the top middle. These strut braces are a solid one-piece design. These give an exclusive look under the hood and extra stabilization to the chassis.
Show More Show Less
Burger Motorsports - Corporate Logo
T#:39126850
Part#: BMSBILSCB-BLU
In Stock
$ 249.00 USD
Free Shipping on orders $49 and up
Burger Motorsports' Billet Strut Cross Braces are designed and made in the USA from billet aluminum in a solid one-piece design. These braces connect from the strut towers to the front radiator support, helping to reinforce your entire front end while also giving your BMW an exclusive under-hood appearance.
Show More Show Less

Emmanuele Design - Corporate Logo
T#:23218024
Part#: EMD-F87-LS
In Stock
$ 349.00 USD
Free Shipping on orders $49 and up
Provides lowering of 1.3" in the front and 0.9" in the rear. Emmanuele Design's lowering springs are properly matched to the factory dampers, ensuring a ride quality that is slightly stiffer than stock, but predictable in nature.
Show More Show Less

Burger Motorsports - Corporate Logo
T#:27138580
Part#: BMSG30SB
Ships on Sep 1, 2026
Starting at $ 249.00 USD
Free Shipping on orders $49 and up
Starting at $ 249.00 USD
Free Shipping on orders $49 and up
The Burger Motorsports Billet Strut Cross Braces for the G30, G14, G15, and G16 are designed and made in the USA from lightweight billet aluminum with the BMS logo engraved on the top middle. These strut braces are a solid one-piece design. These give an exclusive look under the hood and extra stabilization to the chassis. Easy 5-minute install. Simply remove your factory strut braces and replace them with the BMS units for better structural integrity and amazing looks under the hood. Sold in pairs. Available in Black, Silver, Blue, and Red anodized. Single-piece design made from a solid block of billet aluminum Improved chassis rigidity and structural integrity Decreased chassis flex during cornering Utilizes stock mounting bolts Direct bolt-on replacement. No drilling required Made in the USA
Show More Show Less
Burger Motorsports - Corporate Logo
T#:39126853
Part#: BMSBILSCB-BLK
Ships on Sep 1, 2026
$ 249.00 USD
Free Shipping on orders $49 and up
Burger Motorsports' Billet Strut Cross Braces are designed and made in the USA from billet aluminum in a solid one-piece design. These braces connect from the strut towers to the front radiator support, helping to reinforce your entire front end while also giving your BMW an exclusive under-hood appearance.
Show More Show Less

Burger Motorsports - Corporate Logo
T#:46924996
Part#: G22BSCB-RED
Ships on Sep 1, 2026
$ 199.00 USD
Free Shipping on orders $49 and up
Burger Motorsports' strut braces are CNC machined from thick, lightweight billet aluminum with the BMS logo engraved on the top middle. These strut braces are a thick, solid one-piece design and give an exclusive look under the hood and extra stabilization to the chassis.
Show More Show Less
Emmanuele Design - Corporate Logo
T#:35154917
Part#: EMD-G87-LS
Ships in 9 Business Days
$ 349.00 USD
Free Shipping on orders $49 and up

After much anticipation, we are pleased to release our lowering spring kit for the BMW M2 G87 platform! Taking our experience from our highly popular F-chassis offerings, the goal with this offering was to lower the M2 by a tasteful amount while keeping ride quality the same or better than stock. After multiple prototypes and valuable user feedback, we believe that we met our goal. 

Our lowering springs are specifically designed to utilize the factory dampers. They are fully compatible with both standard as well as adaptive suspension. Each spring is made in the USA to our unique specifications for rates and geometries. The springs are made of high tensile chrome silicon and each unit is shot peened, pre-set, and 100% tested to ensure all the critical dimensions and rate/loads are within tolerance. The springs are then powder-coated with a stealth black finish for an OEM appearance.

Front Lowering: 1.3"

Rear Lowering: 0.75"

Stock Front Rate: 186 lb./in.

EMD Auto Front Rate: 194 lb./in.

Stock Rear Rate: 608 lb./in.

EMD Auto Rear Rate: 645 lb./in.

Show More Show Less

Emmanuele Design - Corporate Logo
T#:35154916
Part#: EMD-G80-LS
Ships in 1 Business Day
$ 349.00 USD
Free Shipping on orders $49 and up

After much anticipation, we are pleased to release our lowering spring kit for the BMW M3 G80 platform! Taking our experience from our highly popular F80 springs, the goal with this offering was to lower the M3 by a tasteful amount while keeping ride quality the same or better than stock. After multiple prototypes and valuable user feedback, we believe that we met our goal. 

Our lowering springs are specifically designed to utilize the factory dampers. They are fully compatible with both standard as well as adaptive suspension. Each spring is made in the USA to our unique specifications for rates and geometries. The springs are made of high tensile chrome silicon and each unit is shot peened, pre-set, and 100% tested to ensure all the critical dimensions and rate/loads are within tolerance. The springs are then powder-coated with a stealth black finish for an OEM appearance.

Front Lowering: 1.4"

Rear Lowering: 0.7"

Stock Front Rate: 186 lb./in.

EMD Auto Front Rate: 194 lb./in.

Stock Rear Rate: 608 lb./in.

EMD Auto Rear Rate: 645 lb./in.

Show More Show Less

Burger Motorsports - Corporate Logo
T#:46924998
Part#: G22BSCB-BLU
Ships on Sep 1, 2026
$ 199.00 USD
Free Shipping on orders $49 and up
Burger Motorsports' strut braces are CNC machined from thick, lightweight billet aluminum with the BMS logo engraved on the top middle. These strut braces are a thick, solid one-piece design and give an exclusive look under the hood and extra stabilization to the chassis.
Show More Show Less
Burger Motorsports - Corporate Logo
T#:46924997
Part#: G22BSCB-SIL
Ships on Sep 1, 2026
$ 199.00 USD
Free Shipping on orders $49 and up
Burger Motorsports' strut braces are CNC machined from thick, lightweight billet aluminum with the BMS logo engraved on the top middle. These strut braces are a thick, solid one-piece design and give an exclusive look under the hood and extra stabilization to the chassis.
Show More Show Less
Burger Motorsports - Corporate Logo
T#:46924999
Part#: G22BSCB-BLK
Ships on Sep 1, 2026
$ 199.00 USD
Free Shipping on orders $49 and up
Burger Motorsports' strut braces are CNC machined from thick, lightweight billet aluminum with the BMS logo engraved on the top middle. These strut braces are a thick, solid one-piece design and give an exclusive look under the hood and extra stabilization to the chassis.
Show More Show Less


Burger Motorsports - Corporate Logo
T#:39126852
Part#: BMSBILSCB-RED
Ships on Sep 1, 2026
$ 249.00 USD
Free Shipping on orders $49 and up
Burger Motorsports' Billet Strut Cross Braces are designed and made in the USA from billet aluminum in a solid one-piece design. These braces connect from the strut towers to the front radiator support, helping to reinforce your entire front end while also giving your BMW an exclusive under-hood appearance.
Show More Show Less
Burger Motorsports - Corporate Logo
T#:39126854
Part#: BMSBILSCB-SIL
Ships on Sep 1, 2026
$ 249.00 USD
Free Shipping on orders $49 and up
Burger Motorsports' Billet Strut Cross Braces are designed and made in the USA from billet aluminum in a solid one-piece design. These braces connect from the strut towers to the front radiator support, helping to reinforce your entire front end while also giving your BMW an exclusive under-hood appearance.
Show More Show Less
Burger Motorsports - Corporate Logo
T#:27138575
Part#: BMSZ4SB
Ships on Sep 1, 2026
Starting at $ 249.00 USD
Free Shipping on orders $49 and up
Starting at $ 249.00 USD
Free Shipping on orders $49 and up
The Burger Motorsports Billet Strut Cross Braces for the 2019+ G29 BMW Z4 are designed and made in the USA from lightweight billet aluminum with the BMS logo engraved on the top middle. These strut braces are a solid one-piece design. These give an exclusive look under the hood and extra stabilization to the chassis. Easy 5-minute install. Simply remove your factory strut braces and replace them with the BMS units for better structural integrity and amazing looks under the hood. Sold in pairs. Available in Black, Silver, Blue, and Red anodized. The perfect addition to your G29 BMW Z4 engine bay Single-piece design made from a solid block of billet aluminum Improved chassis rigidity and structural integrity Decreased chassis flex during cornering Utilizes stock mounting bolts Direct bolt-on replacement. No drilling required Made in the USA
Show More Show Less