BMW Suspension Parts

Rear Shock Mounts (RSM) - Upper - OEM Rubber - E82, E9X (non-M) (Pair...

T#:11986

Part#: E9X-URSM

In Stock

Sale - Save 2% $ 49.12

This product was last offered at the strikethrough price on
05-03-2026

$ 48.01 USD

Add to Wish List

Qty

Sale - Save 2%

$ 49.12

This product was last offered at the strikethrough price on
05-03-2026

$ 48.01 USD

Add to Wish List

A 4-piece set of new OEM rear upper and lower shock mounts to complete your shock install or replace broken mounts (RSM). The top mounts on the shocks for the E82 and E90/E91/E92/E93 consist of 4 pieces. These E9X URSM pieces fit all E82 and E9X except the M3 with EDC.

Rear Shock Mount (RSM) Kit consists of:
A. rear upper-top shock mounts, 33506771737
B. rear upper-middle shock mounts, 33506767010
C. rear upper-bottom shock mounts, 33506771738
D. rear upper supporting cup, 33526764418 (sits over bumpstop)
There is also a lower mount that is available separately. This package covers only the rear upper shock mounts.

That's a lot of rubber that takes constant deflecting and absorbing of cornering forces and impacts from bumps, potholes, etc. Replacing the RSMs is key to maintaining a quiet and comfortable ride. Price is for all 4 upper pieces for BOTH sides of the car.

This item fits the following BMWs:
2006-2011 E90 BMW 325i 325xi 328i 328xi 328i xDrive 330i 330xi 335d 335i 335xi 335i xDrive - Sedan
2006-2011 E91 BMW 325xi 328i 328xi 328i xDrive - Wagon
2007-2012 E92 BMW 328i 328xi 328i xDrive 335i 335is 335xi 335i xDrive - Coupe
2007-2012 E93 BMW 328i 335i - Convertible

Show More Show Less

Condor Speed Shop Stackable Rear Spring Pad Set - E30, E36 318ti, Z3 ...

T#:577554

Part#: SPGPAD

Ships in 3 Business Days

$ 49.99 USD

Add to Wish List

Qty

$ 49.99 USD

Add to Wish List

Designed to replace the stock rubber pads. Use them to adjust the ride height on the rear of your e30, e36 318ti or z3. Each set includes 3 pairs of pads of varying thickness (3.5mm, 5mm & 6mm). Use the thinnest pad for the lowest setting, or stack all 3 to raise the rear almost 15mm.

Show More Show Less

Condor Speed Shop Differential Stud Kit - 45mm - E30, E28, E36 318ti,...

T#:578193

Part#: DIFSTKT-1

In Stock

$ 32.00 USD

Add to Wish List

Qty

$ 32.00 USD

Add to Wish List

Condor Speed Shop took the hard work out of removing and reinstalling your differential! If you've ever taken out your diff, you know how much of a pain it is to get the bolt holes to line up during re-installation. They never seem to line up perfectly, and getting the bolts to go in can be time-consuming. Condor's diff studs are designed to make your life a little easier. The diff will line up and lift right into the holes every time. 38mm studs are used with OEM or regular subframe bushings. 45mm studs are used with the 12mm riser subframe bushings. You'll need to pull the driveshaft to drop the diff. Use thread locker during install. Recommended for street or race use. Kit includes: 4 Studs 4 Washers 4 Lock Nuts

Show More Show Less

Condor Speed Shop Rear Trailing Arm Monoball Bushings - BMW E36 E46 ...

T#:40917450

Part#: RTAMB-E36-E46

In Stock at Vendor

$ 265.00 USD

Add to Wish List

Qty

$ 265.00 USD

Add to Wish List

Condor Speed Shop collaborated with Syncro Design Works to create these new Monoball Rear Trailing Arm Bushings designed for the track! While also at home on the street, these performance bushings are designed to handle the stresses of the track, offering a full range of articulation for optimal suspension geometry and a sealed design for maintenance-free operation and a long life. SDW's' own 410hp shop track/streetcar still has the original prototype bearing installed in 2009, with no measurable toe deflection. Condor RTAMBs are precision CNC machined and hard coat anodized to protect against corrosion, moisture, and salt spray. They come fully assembled and ready to install. NOTE: Professional installation recommended. These bushings must be pressed into the factory Rear Trailing Arms.

Show More Show Less

Condor Speed Shop Rear Trailing Arm Pocket Reinforcement Plates - E36...

T#:577570

Part#: REIPLTRTAB36

Ships in 3 Business Days

$ 49.00 USD

Add to Wish List

Qty

$ 49.00 USD

Add to Wish List

Condor's Rear Trailing Arm Pocket Reinforcement Kit is one of the few kits in which the plate is not cut in the shape of a "C". A lot of companies cut them with an opening in order to have less waste when cutting. Their plates are fully connected all the way around making them stronger. This is a must-have reinforcement. The front mounting point of the rear trailing arm is a known area of failure on track driven E36s. Condor's 2-piece reinforcement plate kit reinforces the stock pocket bungs to prevent failure. Welding is required, includes rosette holes. *Does not fit 318ti.

Show More Show Less

BMW Motorsport Rear Sway Bar Bushing - 14-15mm - E90 E92 E82 ...

T#:3213

Part#: 33558300883

Ships on Sep 17, 2026

$ 31.99 USD

Add to Wish List

Qty

$ 31.99 USD

Add to Wish List

This is the factory BMW Motorsport Group N high performance rear sway bar / swaybar bushing for cars with a 14/15mm sway bar. This heavy duty rubber bushing is stiffer than the stock bushing to improve handling. They are great for track use - and Grand Am Cup legal! - yet can also be used on a street driven car - please note these will not be as compliant as the stock rubber bushing.

Sold Individually

This item fits the following BMWs:
2008+ E82 BMW 128i 135i
2006+ E90 BMW 325i 328i 330i 335i
2007+ E92 BMW 328i 335i 335is
2007+ E93 BMW 328i 335i

Show More Show Less

Condor Speed Shop Solid Differential Bushing - E30, E28, Z3 & 318ti ...

T#:587122

Part#: DIFE30

Ships in 2 Business Days

$ 55.00 USD

Add to Wish List

Qty

$ 55.00 USD

Add to Wish List

Condor Speed Shop's E30 solid differential bushing is designed for the street and the track. They use UHMW in all of their suspension bushings because it is stiff, has almost zero deflection yet also absorbs some vibration. It will outlast other types of rubber or urethane bushings. With their solid diff bushing, you won't have to worry about any more rubbery flex in your diff during hard acceleration.

Show More Show Less

Conder Speed Shop Solid Transmission Mounts - BMW F22/23 F3X RWD ...

T#:597365

Part#: TRANSIX_F2XF3X

In Stock at Vendor

$ 34.00 USD

Add to Wish List

Qty

$ 34.00 USD

Add to Wish List

These UHMW race grade transmission mounts are the ultimate solution to keep your transmission from moving under heavy load or acceleration. Transmission movement or "play" can cause missed shifts and extreme mechanical damage in some cases.

Show More Show Less

Condor Speed Shop - Control Arm Bushings Offset - E46

21mm insert for control arm.

T#:40782367

Part#: CONTROLBUSHOFF46

Ships in 2 Business Days

$ 95.00 USD

Add to Wish List

Qty

$ 95.00 USD

Add to Wish List

Polyurethan bushings with a offset insert for control arm.

Poly Transmission Mount Set

T#:597363

Part#: TRANSIX_E39P

Ships in 1 Business Day

$ 35.00 USD

Add to Wish List

Qty

$ 35.00 USD

Add to Wish List

The 70A poly mounts are the solution if you are trying to minimize vibration and NVH. They are currently the softest polyurethane mounts on the market. We suggest these for all street cars. If you are building a track car, check out the solid UHMW transmission mounts from Condor Speed Shop.

Show More Show Less

Macht Schnell Aluminum Differential Bushing Kit - E9X M3

T#:4648688

Part#: 69.10.110

Ships in 8 Business Days

$ 299.00 USD

Add to Wish List

Qty

$ 299.00 USD

Add to Wish List

Macht Schnell's Aluminum Differential Bushing Kit is designed to give your differential carrier more rigidity.

Replacement Bushings for Rear Shock Tower Mounts

T#:1386

Part#: JTD909-75-KIT

Ships on Sep 1, 2026

$ 32.00 USD

Add to Wish List

Qty

$ 32.00 USD

Add to Wish List

The bushings in the Aluminum Rear Shock Tower Mounts (#JTD909) and the Repair Shop Rear Shock Mounts (#JRDRP) are replacable. Simply disassemble the shocks and mounts, replace the bushings, and reassemble. On the JTD909 the shock mount doesn't even have to be removed from the chassis. This set includes enough bushings to replace bushings on both the left and right mounts (4 total).

Show More Show Less

Adjustable Front Camber Bushings

T#:31522921

Part#: 193616-6H

Special Order: No Guaranteed ETA

$ 320.00 USD

Add to Wish List

Qty

$ 320.00 USD

Add to Wish List

Adjustable Rear Upper/Inner Camber Bushings - BMW F22/23 F3X ...

T#:16474811

Part#: 193926-9G

Special Order: No Guaranteed ETA

$ 320.00 USD

Add to Wish List

Qty

$ 320.00 USD

Add to Wish List

Nearly every car manufactured in the modern era carries a dark secret – fully-adjustable suspension has been all but eliminated in the name of cost-cutting and assembly-line efficiency. What this means for you is increased tire wear and more frequent replacement, as a “full alignment” consists only of rudimentary toe-angle adjustment. For over forty years, K-MAC has been hard at work developing a solution to this problem with patented innovations in camber/caster plates and bushing kits, allowing easy adjustment and a true “full four-wheel alignment” to be performed by any competent shop. These bushings make camber adjustments possible for the first time, and improve the ability to complete toe angle adjustments. When used in conjunction with the K-MAC Camber and Toe kit and Rear Adjustable Trailing Arms allows full adjustability of the 5 multi-link rear arms and positive location. Bolt-on installation – insertion/extraction tube included! Easily adjusted on the car with basic hand tools Unique failsafe locking hardware – set & forget! High quality elastomer compound resists binding Hardened & nickel-chrome plated centers for maximum bushing life 2x the load area of stock bushings Spiral grease grooves

Show More Show Less

AAF Steel Tie Downs(pair)

T#:7624657

Part#: 116127

In Stock

$ 18.00 USD

Add to Wish List

Qty

$ 18.00 USD

Add to Wish List

Since 2010, Advanced Auto Fabrication has been producing and developing both parts and full fledged race cars. Their knowledge base covers a wide range of vehicles both domestic and imported. In the specific case of BMW, the team at AAF has a particular affinity for building and designing components for BMW race cars. Steel car tie down loops are an easy way to add a strong tie down to you car. These tie down loops bolt right to your rear lower shock bolts or your front control arm rear mounts with just a longer bolt. Comes as a pair.

Show More Show Less

AutoTecknic Carbon Alcantara Steering Wheel Trim

T#:42571263

Part#: BM-0619PDK

Ships in 7 Business Days

Starting at $ 295.00 USD

Add to Wish List

Starting at $ 295.00 USD

Add to Wish List

SPL Titanium Series Adjustable Rear Toe Arms With Eccentric Lockout K...

T#:56001958

Part#: SPLRUAE9XKT2

Ships in 1 Business Day

$ 1,258.00 USD

Add to Wish List

Qty

$ 1,258.00 USD

Add to Wish List

This premium SPL chassis upgrade kit is engineered to anchor your rear axle. Featuring SPL’s Titanium Series Rear Toe Arms with an eccentric lockout kit, alongside a complete 4 piece set of Rear Upper Wishbones and Guide Links

Show More Show Less

OMP Steel Front Tower Brace

T#:54388398

Part#: MA/1869

Special Order: No Guaranteed ETA

$ 199.00 USD

Add to Wish List

Qty

$ 199.00 USD

Add to Wish List

MINI 2nd and 3rd Gen Rear Competition HD Camber Adjustable Lower Arms...

T#:31423675

Part#: 195026K

Special Order: No Guaranteed ETA

$ 480.00 USD

Add to Wish List

Qty

$ 480.00 USD

Add to Wish List

MINI 2nd and 3rd Gen Rear Competition HD Camber Adjustable Lower Arms - Pair are designed to enhance the handling and performance of your MINI. These high-duty camber adjustable lower arms are crafted for competition use, featuring durable chrome-moly tubing and high-quality bushings. They provide precise camber adjustment to optimize wheel alignment and handling characteristics, making them ideal for track or spirited driving.

Key benefits of the MINI 2nd and 3rd Gen Rear Competition HD Camber Adjustable Lower Arms - Pair include:

Enhanced Handling: Allows for precise camber adjustments to fine-tune wheel alignment for improved handling and stability.
High-Duty Construction: Made from chrome-moly tubing for superior strength and durability under high-stress conditions.
Improved Performance: Designed for competition use, these arms are built to withstand rigorous driving demands.
Durable Bushings: Equipped with high-quality bushings to ensure reliable performance and longevity.
Optimized Alignment: Facilitates better alignment adjustments, contributing to enhanced driving dynamics and tire wear.

Show More Show Less

KMAC Front Adjustable Inner Thrust Arm Bushing

T#:27205341

Part#: 193316-1H

Special Order: No Guaranteed ETA

$ 320.00 USD

Add to Wish List

Qty

$ 320.00 USD

Add to Wish List

Experience effortless caster adjustment with KMAC's premium inner thrust arm bushings.

Key Features:

1. Patented Design: Enjoy precise adjustments with a single wrench, even under load directly on the alignment rack.

2. Simplified Adjustment: Say goodbye to inaccurate multi-bolt systems and time-consuming disassembly for readjustments.

3. Extensive Adjustment Range: Benefit from the largest and strongest adjustment range available.

4. Mono Ball/Dual-Axis Bushings

5. Enhance brake and steering response with these high-performance bushings.

6. Superior Design: Our unique design surpasses traditional steel spherical bearings, offering over 2 ½ times the load-bearing and impact area.

Upgrade your vehicle's handling and responsiveness with KMAC's innovative inner thrust arm bushings.

Show More Show Less

OMP Steel Front Brace - Lower

T#:54388399

Part#: MA/1870

Back Ordered

$ 149.00 USD

Add to Wish List

Qty

$ 149.00 USD

Add to Wish List

Engineered for the enthusiast who demands precise cornering and razor-sharp feedback, this Performance Lower Front Brace is your ticket to a more connected driving experience.

MINI R55 to R59 OMP Steel Front Strut Tower Brace

T#:31291037

Part#: MA/1913

Back Ordered

$ 239.00 USD

Add to Wish List

Qty

$ 239.00 USD

Add to Wish List

MINI R55 to R59 OMP Steel Front Strut Tower Brace is designed to enhance the performance and handling of the MINI Cooper by reducing body roll and torsion. Constructed from high-strength steel and painted red, this strut tower brace features an adjustable bar that mounts securely to the strut towers using the stock hardware. It is engineered to clear the stock air box, ensuring a seamless fit without interference. Please note that this brace will not fit the MINI Cooper JCW GP2 without modifications to the strut mount bolt holes.

Key benefits of the MINI R55 to R59 OMP Steel Front Strut Tower Brace include:

Enhanced Performance: Reduces body roll and torsion for improved handling.
Durable Construction: Made from high-strength steel and painted red.
Adjustable Fit: Features an adjustable bar for a precise fit.
Clearance: Designed to clear the stock air box.
Easy Installation: Utilizes stock hardware for straightforward installation.

Show More Show Less

Project Cars

SELECT YOUR BMW

Sub-Categories

Rear Shock Mounts (RSM) - Upper - OEM Rubber - E82, E9X (non-M) (Pair...

Condor Speed Shop Stackable Rear Spring Pad Set - E30, E36 318ti, Z3 ...

Condor Speed Shop Differential Stud Kit - 45mm - E30, E28, E36 318ti,...

Condor Speed Shop Rear Trailing Arm Monoball Bushings - BMW E36 E46 ...

Condor Speed Shop Rear Trailing Arm Pocket Reinforcement Plates - E36...

BMW Motorsport Rear Sway Bar Bushing - 14-15mm - E90 E92 E82 ...

Condor Speed Shop Solid Differential Bushing - E30, E28, Z3 & 318ti ...

Conder Speed Shop Solid Transmission Mounts - BMW F22/23 F3X RWD ...

Condor Speed Shop - Control Arm Bushings Offset - E46

Poly Transmission Mount Set

Macht Schnell Aluminum Differential Bushing Kit - E9X M3

Replacement Bushings for Rear Shock Tower Mounts

Adjustable Front Camber Bushings

Adjustable Rear Upper/Inner Camber Bushings - BMW F22/23 F3X ...

AAF Steel Tie Downs(pair)

AutoTecknic Carbon Alcantara Steering Wheel Trim

SPL Titanium Series Adjustable Rear Toe Arms With Eccentric Lockout K...

OMP Steel Front Tower Brace

MINI 2nd and 3rd Gen Rear Competition HD Camber Adjustable Lower Arms...

KMAC Front Adjustable Inner Thrust Arm Bushing

OMP Steel Front Brace - Lower

MINI R55 to R59 OMP Steel Front Strut Tower Brace

Select Vehicle

Purpose

Category

Brand

Price

Special Offers

Shipping

Narrow Results