Find Parts That Fit Your Vehicle

BMW Suspension Parts

Your BMW's handling is determined by the capabilities and age of your suspension components. Our selected aftermarket performance suspension like coilovers, lowering springs, cup kits, and dampers can improve the handling of your BMW dramatically. With those upgrades comes the needs for proper adjustment; our recommended supporting modifications comes stiffer sway bars, bushings, and adjustable camber/caster plates, to name a few found on this page. Completely build your suspension for the most competitive BMW driving experience, achieve your perfect look, or simply replace your worn suspension with our recommended parts.

Sub-Categories

Sort By:

H&R Super Sport Spring Set - BMW G80 M3 Comp xDrive
We Price Match - Give Us A Call or Chat!
H&R - Corporate Logo
T#:6523706
Part#: 50498-77
In Stock
15% off MSRP $ 599.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 509.99 USD
Free Shipping on orders $49 and up
15% off MSRP
$ 599.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 509.99 USD
Free Shipping on orders $49 and up
Improve the look and performance of your BMW! H&R brings you a lowering spring set for your BMW designed to work with the Sport and EDC Adaptive suspension systems allowing for a direct swap-in over OEM. Approximate Front lowering: 1.4" Approximate Rear lowering: 1.0" H&R Super Sport Springs have been engineered to deliver improved handling and an even lower ride height than the normal Sport Springs while maintaining superb ride quality. H&R Super Sport Springs are the ideal solution for the enthusiast who appreciates race-bred components designed for street use. The H&R philosophy is simple and effective: To manufacture the best suspension products, using only the highest grade materials. This philosophy has made H&R what it is today - the industry leader in high performance, quality suspension components. Be it on the street or on the track, H&R has become synonymous with consistent, proven suspension performance and quality. H&R lowering spring benefits: Sporty appearance Lowered center of gravity Linear or progressive spring design Improved handling characteristics Compatible with OE and aftermarket shock absorbers Powder coated for enhanced appearance and corrosion resistance Produced in Germany
Show More Show Less
Megan Racing - Corporate Logo
T#:23383285
Part#: MRSBMCC11FU1P
In Stock
$ 99.99 USD
Free Shipping on orders $49 and up

Enhance your BMW's performance with strut bars designed to reduce chassis flex. These bars effectively connect shock towers, providing increased stiffness and rigidity. Improve suspension responsiveness, road manners, and handling characteristics for a more controlled driving experience.

Benefits:

  • Reduces chassis flex for improved performance
  • Connects shock towers for increased stiffness
  • Enhances suspension responsiveness
  • Improves road manners and handling characteristics
Show More Show Less

Burger Motorsports - Corporate Logo
T#:637422
Part#: BMSG20BSCB-BLUE
Ships on Sep 1, 2026
$ 199.00 USD
Free Shipping on orders $49 and up
Constructed from lightweight billet aluminum with the BMS logo engraved on the top middle. These strut braces are a solid one-piece design. These give an exclusive look under the hood and extra stabilization to the chassis.
Show More Show Less

Burger Motorsports - Corporate Logo
T#:637421
Part#: BMSG20BSCB-RED
Ships on Sep 1, 2026
$ 199.00 USD
Free Shipping on orders $49 and up
Constructed from lightweight billet aluminum with the BMS logo engraved on the top middle. These strut braces are a solid one-piece design. These give an exclusive look under the hood and extra stabilization to the chassis.
Show More Show Less
Burger Motorsports - Corporate Logo
T#:39126850
Part#: BMSBILSCB-BLU
In Stock
$ 249.00 USD
Free Shipping on orders $49 and up
Burger Motorsports' Billet Strut Cross Braces are designed and made in the USA from billet aluminum in a solid one-piece design. These braces connect from the strut towers to the front radiator support, helping to reinforce your entire front end while also giving your BMW an exclusive under-hood appearance.
Show More Show Less

Genuine BMW Motorsport - Corporate Logo
T#:3213
Part#: 33558300883
Ships on Sep 17, 2026
$ 31.99 USD
Free Shipping on orders $49 and up
This is the factory BMW Motorsport Group N high performance rear sway bar / swaybar bushing for cars with a 14/15mm sway bar. This heavy duty rubber bushing is stiffer than the stock bushing to improve handling. They are great for track use - and Grand Am Cup legal! - yet can also be used on a street driven car - please note these will not be as compliant as the stock rubber bushing.

Sold Individually

This item fits the following BMWs:
2008+ E82 BMW 128i 135i
2006+ E90 BMW 325i 328i 330i 335i
2007+ E92 BMW 328i 335i 335is
2007+ E93 BMW 328i 335i
Show More Show Less
Megan Racing - Corporate Logo
T#:31390546
Part#: MRS-MC-0721
Back Ordered
$ 200.00 USD
Free Shipping on orders $49 and up

MINI Cooper 2014+ F56 Rear Upper Camber Arm replaces the factory rear upper control arm with an adjustable turnbuckle style unit, allowing for precise tuning of the vehicle's rear camber alignment angles.

  • Adjustable Turnbuckle Design: Enables fine-tuning of rear camber for enhanced alignment precision.
  • Durable Construction: Made from lightweight steel-alloy to withstand extreme competition stresses.
  • Powder-Coated Finish: Features a 3-stage coating process for durability and protection against environmental elements.
  • Spherical Bushings: Provides free movement with no binding, eliminating slop compared to factory rubber bushings.
  • Improved Vehicle Dynamics: Enhances response and absorbs road forces more effectively.
  • Corrosion-Resistant Hardware: All components are treated to prevent rust and corrosion.
  • Warranty: Comes with a 1-year warranty against manufacturer defects.
Show More Show Less

Megan Racing - Corporate Logo
T#:28836400
Part#: MR-SB-MC02FU-1P
In Stock
$ 119.99 USD
Free Shipping on orders $49 and up

MINI R50 R52 R53 Front Upper Race-Spec Strut Tower Bar

Enhance your Mini's handling with the MINI R50 R52 R53 Front Upper Race-Spec Strut Tower Bar. Specifically designed for Mini R50, R52, and R53 models, this strut tower bar improves chassis rigidity for sharper handling and better cornering performance. Upgrade your Mini's suspension with this race-spec strut tower bar for a more thrilling driving experience.

  • Specifically designed for Mini R50, R52, and R53 models
  • Improves chassis rigidity for sharper handling
  • Enhances cornering performance
  • Race-spec construction for durability and performance
  • Easy installation for hassle-free upgrade
Show More Show Less

TC Kline Racing - Corporate Logo
T#:23416519
Part#: TCKR56CP
In Stock
$ 335.00 USD
Free Shipping on orders $49 and up
Enhance your Mini's performance with TCKR's high-quality aluminum alloy camber plates, designed for easy adjustment and unparalleled functionality. These camber plates are compatible with most stock or aftermarket struts, including Coil Over configurations, without requiring extra parts. They work seamlessly with various springs like H&R, Vogtland, or Eibach, ensuring improved turn-in without compromising ride comfort.
  • Compatible with most stock or aftermarket struts, including Coil Over setups
  • Works with stock or lowering springs like H&R, Vogtland, or Eibach
  • Significantly improves turn-in without compromising ride comfort
  • Lightweight and durable aluminum alloy construction with anodized coating
  • Features a replaceable spherical ball joint for durability
  • Allows a 1.5-degree range of camber adjustment without affecting toe setting
  • Enables quick and easy adjustment for both street and track optimization
Show More Show Less
Burger Motorsports - Corporate Logo
T#:39126853
Part#: BMSBILSCB-BLK
Ships on Sep 1, 2026
$ 249.00 USD
Free Shipping on orders $49 and up
Burger Motorsports' Billet Strut Cross Braces are designed and made in the USA from billet aluminum in a solid one-piece design. These braces connect from the strut towers to the front radiator support, helping to reinforce your entire front end while also giving your BMW an exclusive under-hood appearance.
Show More Show Less
Megan Racing - Corporate Logo
T#:31125673
Part#: MRSMC0120
Ships in 5 Business Days
$ 212.99 USD
Free Shipping on orders $49 and up

Megan Racing offers Adjustable Rear Lower Control Arms designed specifically for 2002+ MINI models, including the One, Cooper, Cooper S, Clubman, and Countryman. These control arms are constructed from a lightweight yet durable steel alloy and feature a striking blue-metallic finish thanks to a meticulous 3-stage powder coating process. They include a turn-buckle style adjustment mechanism for easy tuning and anti-dust pillow ball ends for a more direct driving feel without sacrificing comfort.

  • Lightweight and Durable: Made from steel alloy, ensuring a strong yet light component.
  • Anti-Dust Pillow Ball Ends: Provides a direct driving feel with improved durability.
  • Customizable Finish: Blue-metallic powder coat with a 3-stage process for enhanced appearance and protection.
  • Easy Adjustment: Turn-buckle style center adjustment for straightforward camber or toe modifications.
  • Versatile Fitment: Can be used to adjust either camber or toe, with the option to use two sets for complete rear suspension tuning.
  • 1-Year Warranty: Manufacturer's warranty against defects for peace of mind.

Applications:

  • Fits 2002+ MINI models including R50, R52, R53, R55, R56, R57, R58, R59, R60, and R61.
Show More Show Less


Burger Motorsports - Corporate Logo
T#:27138580
Part#: BMSG30SB
Ships on Aug 31, 2026
Starting at $ 249.00 USD
Free Shipping on orders $49 and up
Starting at $ 249.00 USD
Free Shipping on orders $49 and up
The Burger Motorsports Billet Strut Cross Braces for the G30, G14, G15, and G16 are designed and made in the USA from lightweight billet aluminum with the BMS logo engraved on the top middle. These strut braces are a solid one-piece design. These give an exclusive look under the hood and extra stabilization to the chassis. Easy 5-minute install. Simply remove your factory strut braces and replace them with the BMS units for better structural integrity and amazing looks under the hood. Sold in pairs. Available in Black, Silver, Blue, and Red anodized. Single-piece design made from a solid block of billet aluminum Improved chassis rigidity and structural integrity Decreased chassis flex during cornering Utilizes stock mounting bolts Direct bolt-on replacement. No drilling required Made in the USA
Show More Show Less
Tension strut ball joint kit
Call In Or Chat For Best Price!
Dinan - Corporate Logo
T#:23284050
Part#: D280-0019
Back Ordered
Sale - Save 10% $ 519.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 467.96 USD
Free Shipping on orders $49 and up
Sale - Save 10%
$ 519.99

This product was last offered at the strikethrough price on
07-31-2026

$ 467.96 USD
Free Shipping on orders $49 and up
Genuine BMW M Performance - Corporate Logo
T#:593634
Part#: 31302463686
Ships in 8 Business Days
4% off MSRP $ 380.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 365.99 USD
Free Shipping on orders $49 and up
4% off MSRP
$ 380.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 365.99 USD
Free Shipping on orders $49 and up
Includes new lower spring pads, bump stops, and seats

JT Design - Corporate Logo
T#:1386
Part#: JTD909-75-KIT
Ships on Sep 1, 2026
$ 32.00 USD
Free Shipping on orders $49 and up
The bushings in the Aluminum Rear Shock Tower Mounts (#JTD909) and the Repair Shop Rear Shock Mounts (#JRDRP) are replacable. Simply disassemble the shocks and mounts, replace the bushings, and reassemble. On the JTD909 the shock mount doesn't even have to be removed from the chassis. This set includes enough bushings to replace bushings on both the left and right mounts (4 total).
Show More Show Less

Megan Racing - Corporate Logo
T#:28869571
Part#: MR-LS-MC02
Ships in 5 Business Days
$ 169.00 USD
Free Shipping on orders $49 and up
Megan Racing Performance Lowering Springs are crafted from SAE 9254 Cold Wounded Steel, renowned for its exceptional strength. With high tensile strength and a phosphate powder coating, these springs offer outstanding spring rates that resist premature sagging. The result is a spring that delivers racecar handling while maintaining smooth and comfortable ride characteristics. Carefully matched spring rates ensure exceptional handling, response, control, and balance. These springs provide a generous drop to your car while remaining streetable, offering enough clearance to avoid bottoming out. The lowered center of gravity enhances performance, stability, and appearance. (Note: Spring rates and drop amount may vary based on different vehicle applications and chassis load.) Specs: Lowering rate: Average 1.1" Front, 1.49" Rear (Note: Spring rates and drop amount may vary based on different vehicle applications and chassis load.) Spring Rates: - Front: 2.73 kgf/mm - Rear: 3.74 kgf/mm
Show More Show Less
Burger Motorsports - Corporate Logo
T#:27138575
Part#: BMSZ4SB
Ships on Aug 31, 2026
Starting at $ 249.00 USD
Free Shipping on orders $49 and up
Starting at $ 249.00 USD
Free Shipping on orders $49 and up
The Burger Motorsports Billet Strut Cross Braces for the 2019+ G29 BMW Z4 are designed and made in the USA from lightweight billet aluminum with the BMS logo engraved on the top middle. These strut braces are a solid one-piece design. These give an exclusive look under the hood and extra stabilization to the chassis. Easy 5-minute install. Simply remove your factory strut braces and replace them with the BMS units for better structural integrity and amazing looks under the hood. Sold in pairs. Available in Black, Silver, Blue, and Red anodized. The perfect addition to your G29 BMW Z4 engine bay Single-piece design made from a solid block of billet aluminum Improved chassis rigidity and structural integrity Decreased chassis flex during cornering Utilizes stock mounting bolts Direct bolt-on replacement. No drilling required Made in the USA
Show More Show Less

Burger Motorsports - Corporate Logo
T#:46924998
Part#: G22BSCB-BLU
Ships on Sep 1, 2026
$ 199.00 USD
Free Shipping on orders $49 and up
Burger Motorsports' strut braces are CNC machined from thick, lightweight billet aluminum with the BMS logo engraved on the top middle. These strut braces are a thick, solid one-piece design and give an exclusive look under the hood and extra stabilization to the chassis.
Show More Show Less
Burger Motorsports - Corporate Logo
T#:39126854
Part#: BMSBILSCB-SIL
Ships on Sep 1, 2026
$ 249.00 USD
Free Shipping on orders $49 and up
Burger Motorsports' Billet Strut Cross Braces are designed and made in the USA from billet aluminum in a solid one-piece design. These braces connect from the strut towers to the front radiator support, helping to reinforce your entire front end while also giving your BMW an exclusive under-hood appearance.
Show More Show Less

Burger Motorsports - Corporate Logo
T#:46924996
Part#: G22BSCB-RED
Ships on Sep 1, 2026
$ 199.00 USD
Free Shipping on orders $49 and up
Burger Motorsports' strut braces are CNC machined from thick, lightweight billet aluminum with the BMS logo engraved on the top middle. These strut braces are a thick, solid one-piece design and give an exclusive look under the hood and extra stabilization to the chassis.
Show More Show Less

Megan Racing - Corporate Logo
T#:26171598
Part#: MRC-BM-0324-OE
Ships in 5 Business Days
$ 545.00 USD
Free Shipping on orders $49 and up

Enhance your BMW's performance with Megan Racing front lower control arms for the F30/F32 models. Crafted from lightweight cast aluminum, these control arms are built to withstand extreme competition while keeping weight to a minimum. The inclusion of spherical and polyurethane bushings ensures unrestricted movement, eliminating play often present in factory rubber bushings. Improve cornering response and absorb road forces more efficiently with Megan Racing control arms.

  • Lightweight cast aluminum construction
  • Spherical and polyurethane bushings for unrestricted movement
  • Improved cornering response
  • Enhanced ability to absorb road forces
  • Corrosion-resistant hardware
  • 1-year warranty against manufacturer defects
Show More Show Less
Burger Motorsports - Corporate Logo
T#:39126852
Part#: BMSBILSCB-RED
Ships on Sep 1, 2026
$ 249.00 USD
Free Shipping on orders $49 and up
Burger Motorsports' Billet Strut Cross Braces are designed and made in the USA from billet aluminum in a solid one-piece design. These braces connect from the strut towers to the front radiator support, helping to reinforce your entire front end while also giving your BMW an exclusive under-hood appearance.
Show More Show Less
Burger Motorsports - Corporate Logo
T#:46924997
Part#: G22BSCB-SIL
Ships on Sep 1, 2026
$ 199.00 USD
Free Shipping on orders $49 and up
Burger Motorsports' strut braces are CNC machined from thick, lightweight billet aluminum with the BMS logo engraved on the top middle. These strut braces are a thick, solid one-piece design and give an exclusive look under the hood and extra stabilization to the chassis.
Show More Show Less


Burger Motorsports - Corporate Logo
T#:46924999
Part#: G22BSCB-BLK
Ships on Sep 1, 2026
$ 199.00 USD
Free Shipping on orders $49 and up
Burger Motorsports' strut braces are CNC machined from thick, lightweight billet aluminum with the BMS logo engraved on the top middle. These strut braces are a thick, solid one-piece design and give an exclusive look under the hood and extra stabilization to the chassis.
Show More Show Less
Megan Racing - Corporate Logo
T#:7624659
Part#: MR-LS-BE89
Ships in 5 Business Days
$ 222.00 USD
Free Shipping on orders $49 and up
The Megan Racing lowering spring kit improves your vehicle's looks and performance. Megan’s lowering springs lower the vehicle's center of gravity, reducing body roll in the turns, diving under braking, squatting during acceleration, and giving the car a more solid secure feel at all times.
Show More Show Less
OMP - Corporate Logo
T#:54388398
Part#: MA/1869
Special Order: No Guaranteed ETA
New Item
$ 199.00 USD
Free Shipping on orders $49 and up

A90 Supra Experience Package
Call In Or Chat For Best Price!
Dinan - Corporate Logo
T#:30197980
Part#: A90-SUPRA-E-B
Ships on Sep 1, 2026
Sale - Save 10% $ 2,467.99

This product was last offered at the strikethrough price on
07-31-2026

$ 2,220.82 USD
Free Shipping on orders $49 and up
Sale - Save 10%
$ 2,467.99

This product was last offered at the strikethrough price on
07-31-2026

$ 2,220.82 USD
Free Shipping on orders $49 and up
Going beyond its Foundation counterpart, the Dinan Experience packages address not only the engine but also the chassis for a complete solution in the form of a wholly tuned Dinan vehicle. While adding power modifiers is often the go-to path when beginning the modification journey, it does not fully consider what makes the car infinitely more enjoyable in scenarios outside of WOT pulls. With the addition of suspension upgrades integrated alongside the power adders, the vehicle is transformed into something more than just the sum of its parts. It's a comprehensive answer to delivering additional technical capabilities in the form of increased engine performance and better handling along with improvements to aesthetics (looks and sound) in a package designed with reliability and safety in mind. This union of power and handling modifications results in a true OEM+ experience - the Dinan Experience. Includes Dinan Exhaust Dinan Intake Dinan Turbo Inlet Strut Braces Throttle Booster Dinan Badge Features Smiles per gallon instantly multiplied Guaranteed component compatibility and seamless integration 10% price savings when compared to buying the same components a la carte Maximum gains of +13 HP and +14 lb-ft of torque (Exhaust +Intake) Smoother, louder and sportier sound (Exhaust + Intake + Turbo Inlet) Computer-controlled exhaust valves are retained and limit noise during low-speed driving and open fully during high-load conditions (Exhaust) Deletes resonator between the catalyst and rear muffler for increased volume (Exhaust) 10 pounds lighter than the stock for an improved power-to-weight ratio (Exhaust) Reduced intake restriction for greater flow that allows increased turbo efficiency and greater power potential on modified builds (Intake + Turbo Inlet) Improved throttle response (Intake + Turbo Inlet) Increased chassis rigidity with decreased flex during cornering for improved handling and performance (Strut Braces) Customizable throttle mapping for enhances feel and acceleration (Throttle Booster) Every Experience Package instantly qualifies for the Fabled Dinan deck lid badge Includes Dinan Exhaust Dinan Intake Dinan Turbo Inlet Strut Braces Throttle Booster Dinan Badge Features Smiles per gallon instantly multiplied Guaranteed component compatibility and seamless integration 10% price savings when compared to buying the same components a la carte Maximum gains of +13 HP and +14 lb-ft of torque (Exhaust +Intake) Smoother, louder and sportier sound (Exhaust + Intake + Turbo Inlet) Computer-controlled exhaust valves are retained and limit noise during low-speed driving and open fully during high-load conditions (Exhaust) Deletes resonator between the catalyst and rear muffler for increased volume (Exhaust) 10 pounds lighter than the stock for an improved power-to-weight ratio (Exhaust) Reduced intake restriction for greater flow that allows increased turbo efficiency and greater power potential on modified builds (Intake + Turbo Inlet) Improved throttle response (Intake + Turbo Inlet) Increased chassis rigidity with decreased flex during cornering for improved handling and performance (Strut Braces) Customizable throttle mapping for enhances feel and acceleration (Throttle Booster) Every Experience Package instantly qualifies for the Fabled Dinan deck lid badge
Show More Show Less

H&R - Corporate Logo
T#:54388478
Part#: 72450
Back Ordered
New Item
10% off MSRP $ 745.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 670.99 USD
Free Shipping on orders $49 and up
10% off MSRP
$ 745.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 670.99 USD
Free Shipping on orders $49 and up
H&R Sport Sway Bars are the ultimate suspension upgrade for drivers who demand crisp turn-in and maximum cornering grip. Crafted from a specialized 50CrV4 steel alloy boasting the highest tensile strength on the market, these bars significantly increase stiffness over your soft factory setup, dramatically reducing body roll and decreasing steering feedback response time.
Show More Show Less
OMP - Corporate Logo
T#:54388399
Part#: MA/1870
Back Ordered
New Item
$ 149.00 USD
Free Shipping on orders $49 and up
Engineered for the enthusiast who demands precise cornering and razor-sharp feedback, this Performance Lower Front Brace is your ticket to a more connected driving experience.

OMP - Corporate Logo
T#:31291037
Part#: MA/1913
Back Ordered
$ 239.00 USD
Free Shipping on orders $49 and up

MINI R55 to R59 OMP Steel Front Strut Tower Brace is designed to enhance the performance and handling of the MINI Cooper by reducing body roll and torsion. Constructed from high-strength steel and painted red, this strut tower brace features an adjustable bar that mounts securely to the strut towers using the stock hardware. It is engineered to clear the stock air box, ensuring a seamless fit without interference. Please note that this brace will not fit the MINI Cooper JCW GP2 without modifications to the strut mount bolt holes.

Key benefits of the MINI R55 to R59 OMP Steel Front Strut Tower Brace include:

  • Enhanced Performance: Reduces body roll and torsion for improved handling.
  • Durable Construction: Made from high-strength steel and painted red.
  • Adjustable Fit: Features an adjustable bar for a precise fit.
  • Clearance: Designed to clear the stock air box.
  • Easy Installation: Utilizes stock hardware for straightforward installation.
Show More Show Less
Megan Racing - Corporate Logo
T#:28803231
Part#: MRLSMC08
Back Ordered
$ 185.99 USD
Free Shipping on orders $49 and up

Transform your Mini's handling with the MINI R56 Lowering Spring Euro Version MR-LS-MC08.

These lowering springs provide a Euro-inspired stance, enhancing both the look and performance of your Mini. Crafted with precision engineering, they offer improved handling and cornering capabilities, allowing for a more agile driving experience. With their high-quality construction and easy installation, they offer a hassle-free way to achieve a sportier appearance and superior handling.

Benefits:

  • Euro-inspired stance for enhanced aesthetics
  • Improved handling and cornering capabilities
  • Precision engineering for optimal performance
  • High-quality construction for durability
  • Easy installation for convenience
Show More Show Less