BMW Suspension Parts

TCKR E82 & E9X (non-M) Single Adjustable Coilover Kit - F300# - R400#...

T#:27905143

Part#: TCKE9XSNG300400

Ships in 2 Business Days

$ 2,484.99 USD

Add to Wish List

Qty

$ 2,484.99 USD

Add to Wish List

Condor Speed Shop Stackable Rear Spring Pad Set - E30, E36 318ti, Z3 ...

T#:577554

Part#: SPGPAD

Ships in 3 Business Days

$ 49.99 USD

Add to Wish List

Qty

$ 49.99 USD

Add to Wish List

Designed to replace the stock rubber pads. Use them to adjust the ride height on the rear of your e30, e36 318ti or z3. Each set includes 3 pairs of pads of varying thickness (3.5mm, 5mm & 6mm). Use the thinnest pad for the lowest setting, or stack all 3 to raise the rear almost 15mm.

Show More Show Less

Condor Speed Shop Differential Stud Kit - 45mm - E30, E28, E36 318ti,...

T#:578193

Part#: DIFSTKT-1

In Stock

$ 32.00 USD

Add to Wish List

Qty

$ 32.00 USD

Add to Wish List

Condor Speed Shop took the hard work out of removing and reinstalling your differential! If you've ever taken out your diff, you know how much of a pain it is to get the bolt holes to line up during re-installation. They never seem to line up perfectly, and getting the bolts to go in can be time-consuming. Condor's diff studs are designed to make your life a little easier. The diff will line up and lift right into the holes every time. 38mm studs are used with OEM or regular subframe bushings. 45mm studs are used with the 12mm riser subframe bushings. You'll need to pull the driveshaft to drop the diff. Use thread locker during install. Recommended for street or race use. Kit includes: 4 Studs 4 Washers 4 Lock Nuts

Show More Show Less

Condor Speed Shop Rear Trailing Arm Monoball Bushings - BMW E36 E46 ...

T#:40917450

Part#: RTAMB-E36-E46

In Stock at Vendor

$ 265.00 USD

Add to Wish List

Qty

$ 265.00 USD

Add to Wish List

Condor Speed Shop collaborated with Syncro Design Works to create these new Monoball Rear Trailing Arm Bushings designed for the track! While also at home on the street, these performance bushings are designed to handle the stresses of the track, offering a full range of articulation for optimal suspension geometry and a sealed design for maintenance-free operation and a long life. SDW's' own 410hp shop track/streetcar still has the original prototype bearing installed in 2009, with no measurable toe deflection. Condor RTAMBs are precision CNC machined and hard coat anodized to protect against corrosion, moisture, and salt spray. They come fully assembled and ready to install. NOTE: Professional installation recommended. These bushings must be pressed into the factory Rear Trailing Arms.

Show More Show Less

Burger Motorsports Billet Strut Cross Braces - Blue - G20 M340i 330i,...

T#:637422

Part#: BMSG20BSCB-BLUE

Ships on Aug 31, 2026

$ 199.00 USD

Add to Wish List

Qty

$ 199.00 USD

Add to Wish List

Constructed from lightweight billet aluminum with the BMS logo engraved on the top middle. These strut braces are a solid one-piece design. These give an exclusive look under the hood and extra stabilization to the chassis.

Show More Show Less

Burger Motorsports Billet Strut Cross Braces - Red - G20 M340i 330i, ...

T#:637421

Part#: BMSG20BSCB-RED

Ships on Aug 31, 2026

$ 199.00 USD

Add to Wish List

Qty

$ 199.00 USD

Add to Wish List

Constructed from lightweight billet aluminum with the BMS logo engraved on the top middle. These strut braces are a solid one-piece design. These give an exclusive look under the hood and extra stabilization to the chassis.

Show More Show Less

BMS Billet Strut Cross Braces - Anodized Blue - BMW G01 X3, G02 X4, F...

T#:39126850

Part#: BMSBILSCB-BLU

In Stock

$ 249.00 USD

Add to Wish List

Qty

$ 249.00 USD

Add to Wish List

Burger Motorsports' Billet Strut Cross Braces are designed and made in the USA from billet aluminum in a solid one-piece design. These braces connect from the strut towers to the front radiator support, helping to reinforce your entire front end while also giving your BMW an exclusive under-hood appearance.

Show More Show Less

Condor Speed Shop Rear Trailing Arm Pocket Reinforcement Plates - E36...

T#:577570

Part#: REIPLTRTAB36

Ships in 3 Business Days

$ 49.00 USD

Add to Wish List

Qty

$ 49.00 USD

Add to Wish List

Condor's Rear Trailing Arm Pocket Reinforcement Kit is one of the few kits in which the plate is not cut in the shape of a "C". A lot of companies cut them with an opening in order to have less waste when cutting. Their plates are fully connected all the way around making them stronger. This is a must-have reinforcement. The front mounting point of the rear trailing arm is a known area of failure on track driven E36s. Condor's 2-piece reinforcement plate kit reinforces the stock pocket bungs to prevent failure. Welding is required, includes rosette holes. *Does not fit 318ti.

Show More Show Less

BMW Motorsport Rear Sway Bar Bushing - 14-15mm - E90 E92 E82 ...

T#:3213

Part#: 33558300883

Ships on Sep 16, 2026

$ 31.99 USD

Add to Wish List

Qty

$ 31.99 USD

Add to Wish List

This is the factory BMW Motorsport Group N high performance rear sway bar / swaybar bushing for cars with a 14/15mm sway bar. This heavy duty rubber bushing is stiffer than the stock bushing to improve handling. They are great for track use - and Grand Am Cup legal! - yet can also be used on a street driven car - please note these will not be as compliant as the stock rubber bushing.

Sold Individually

This item fits the following BMWs:
2008+ E82 BMW 128i 135i
2006+ E90 BMW 325i 328i 330i 335i
2007+ E92 BMW 328i 335i 335is
2007+ E93 BMW 328i 335i

Show More Show Less

TC Kline Camber Plates - Pair - R5X

T#:23416519

Part#: TCKR56CP

In Stock

$ 335.00 USD

Add to Wish List

Qty

$ 335.00 USD

Add to Wish List

Enhance your Mini's performance with TCKR's high-quality aluminum alloy camber plates, designed for easy adjustment and unparalleled functionality. These camber plates are compatible with most stock or aftermarket struts, including Coil Over configurations, without requiring extra parts. They work seamlessly with various springs like H&R, Vogtland, or Eibach, ensuring improved turn-in without compromising ride comfort.

Compatible with most stock or aftermarket struts, including Coil Over setups
Works with stock or lowering springs like H&R, Vogtland, or Eibach
Significantly improves turn-in without compromising ride comfort
Lightweight and durable aluminum alloy construction with anodized coating
Features a replaceable spherical ball joint for durability
Allows a 1.5-degree range of camber adjustment without affecting toe setting
Enables quick and easy adjustment for both street and track optimization

Show More Show Less

BMS Billet Strut Cross Braces - Anodized Black - BMW G01 X3, G02 X4, ...

T#:39126853

Part#: BMSBILSCB-BLK

Ships on Aug 31, 2026

$ 249.00 USD

Add to Wish List

Qty

$ 249.00 USD

Add to Wish List

Burger Motorsports' Billet Strut Cross Braces are designed and made in the USA from billet aluminum in a solid one-piece design. These braces connect from the strut towers to the front radiator support, helping to reinforce your entire front end while also giving your BMW an exclusive under-hood appearance.

Show More Show Less

Condor Speed Shop - Control Arm Bushings Offset - E46

21mm insert for control arm.

T#:40782367

Part#: CONTROLBUSHOFF46

Ships in 2 Business Days

$ 95.00 USD

Add to Wish List

Qty

$ 95.00 USD

Add to Wish List

Polyurethan bushings with a offset insert for control arm.

Conder Speed Shop Solid Transmission Mounts - BMW F22/23 F3X RWD ...

T#:597365

Part#: TRANSIX_F2XF3X

In Stock at Vendor

$ 34.00 USD

Add to Wish List

Qty

$ 34.00 USD

Add to Wish List

These UHMW race grade transmission mounts are the ultimate solution to keep your transmission from moving under heavy load or acceleration. Transmission movement or "play" can cause missed shifts and extreme mechanical damage in some cases.

Show More Show Less

Condor Speed Shop Solid Differential Bushing - E30, E28, Z3 & 318ti ...

T#:587122

Part#: DIFE30

Ships in 2 Business Days

$ 55.00 USD

Add to Wish List

Qty

$ 55.00 USD

Add to Wish List

Condor Speed Shop's E30 solid differential bushing is designed for the street and the track. They use UHMW in all of their suspension bushings because it is stiff, has almost zero deflection yet also absorbs some vibration. It will outlast other types of rubber or urethane bushings. With their solid diff bushing, you won't have to worry about any more rubbery flex in your diff during hard acceleration.

Show More Show Less

Billet Strut Cross Braces For G30 G14 G15 G16

T#:27138580

Part#: BMSG30SB

Ships on Aug 31, 2026

Starting at $ 249.00 USD

Add to Wish List

Starting at $ 249.00 USD

Add to Wish List

The Burger Motorsports Billet Strut Cross Braces for the G30, G14, G15, and G16 are designed and made in the USA from lightweight billet aluminum with the BMS logo engraved on the top middle. These strut braces are a solid one-piece design. These give an exclusive look under the hood and extra stabilization to the chassis. Easy 5-minute install. Simply remove your factory strut braces and replace them with the BMS units for better structural integrity and amazing looks under the hood. Sold in pairs. Available in Black, Silver, Blue, and Red anodized. Single-piece design made from a solid block of billet aluminum Improved chassis rigidity and structural integrity Decreased chassis flex during cornering Utilizes stock mounting bolts Direct bolt-on replacement. No drilling required Made in the USA

Show More Show Less

Poly Transmission Mount Set

T#:597363

Part#: TRANSIX_E39P

Ships in 1 Business Day

$ 35.00 USD

Add to Wish List

Qty

$ 35.00 USD

Add to Wish List

The 70A poly mounts are the solution if you are trying to minimize vibration and NVH. They are currently the softest polyurethane mounts on the market. We suggest these for all street cars. If you are building a track car, check out the solid UHMW transmission mounts from Condor Speed Shop.

Show More Show Less

Replacement Bushings for Rear Shock Tower Mounts

T#:1386

Part#: JTD909-75-KIT

Ships on Aug 31, 2026

$ 32.00 USD

Add to Wish List

Qty

$ 32.00 USD

Add to Wish List

The bushings in the Aluminum Rear Shock Tower Mounts (#JTD909) and the Repair Shop Rear Shock Mounts (#JRDRP) are replacable. Simply disassemble the shocks and mounts, replace the bushings, and reassemble. On the JTD909 the shock mount doesn't even have to be removed from the chassis. This set includes enough bushings to replace bushings on both the left and right mounts (4 total).

Show More Show Less

E36, E46, Z3 Rear Shock Mount Reinforcement (Sold Each)

T#:578621

Part#: B3300044

In Stock

Sale - Save 3% $ 8.99

This product was last offered at the strikethrough price on
05-03-2026

$ 8.68 USD

Add to Wish List

Qty

Sale - Save 3%

$ 8.99

This product was last offered at the strikethrough price on
05-03-2026

$ 8.68 USD

Add to Wish List

This is a direct replacement for the factory BMW rear shock mount reinforcement, as equipped by BMW on Z3 models. This also fits all E36 and E46 models as well. Turner Motorsport makes our own that are thicker but these can also do a good job of preventing cracks and deformation of the rear shock towers. Priced per reinforcement plate. Order 2 to cover both rear shock towers. From 1974 to 2019, Bavarian Autosport was one of the premier vendors for BMW and MINI auto parts. We are happy to preserve the Bav Auto legacy by continuing to carry their high-quality products into the future. All Bav Auto parts will remain unchanged in design and sourced from the same OEM suppliers to ensure long-lasting reliability. We trust these parts, accessories, and upgrades so confidently that we back every Bavarian Autosport branded component with a 2-year warranty. This item fits the following BMWs: 1992-1999 E36 BMW 318i 318is 318ti 318ic 323is 325i 325is 328i 328is M3 (not for convertible models) 1999-2006 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi M3 (not for convertible models) 1997-2002 Z3 BMW Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M Roadster M Coupe

Show More Show Less

Upper Control Arm with Bushing - Right

T#:579752

Part#: 51569

In Stock

Sale - Save 80% $ 59.99

This product was last offered at the strikethrough price on
05-03-2026

$ 12.24 USD

Add to Wish List

Qty

Sale - Save 80%

$ 59.99

This product was last offered at the strikethrough price on
05-03-2026

$ 12.24 USD

Add to Wish List

Control arm with factory bushing for easy installation! If your control arm bushing is bad, it's worth buying this entire unit to save yourself time and money down the road.

T#:46924999

Part#: G22BSCB-BLK

Ships on Aug 31, 2026

$ 199.00 USD

Add to Wish List

Qty

$ 199.00 USD

Add to Wish List

Burger Motorsports' strut braces are CNC machined from thick, lightweight billet aluminum with the BMS logo engraved on the top middle. These strut braces are a thick, solid one-piece design and give an exclusive look under the hood and extra stabilization to the chassis.

Show More Show Less

Loaded Rear Strut - Rear Right

T#:23681823

Part#: 882621

Ships in 1 Business Day

$ 98.99 USD

Add to Wish List

Qty

$ 98.99 USD

Add to Wish List

Loaded Rear Strut - Rear Left

T#:23681824

Part#: 882622

Ships in 1 Business Day

$ 98.99 USD

Add to Wish List

Qty

$ 98.99 USD

Add to Wish List

Upper Control Arm Ball Joint - E53

T#:579797

Part#: 52322

Special Order: No Guaranteed ETA

Sale - Save 20% $ 31.99

This product was last offered at the strikethrough price on
05-03-2026

$ 25.59 USD

Add to Wish List

Qty

Sale - Save 20%

$ 31.99

This product was last offered at the strikethrough price on
05-03-2026

$ 25.59 USD

Add to Wish List

Mounting bolts sold separately. Two required per ball joint.

Sway Bar Link - Front

T#:579821

Part#: 52501

Special Order: No Guaranteed ETA

Sale - Save 20% $ 19.99

This product was last offered at the strikethrough price on
05-03-2026

$ 15.99 USD

Add to Wish List

Qty

Sale - Save 20%

$ 19.99

This product was last offered at the strikethrough price on
05-03-2026

$ 15.99 USD

Add to Wish List

Rear Suspension Carrier / Differential Mount - Front Left - E46 E83 ...

T#:579685

Part#: 50259

Special Order: No Guaranteed ETA

Sale - Save 20% $ 25.99

This product was last offered at the strikethrough price on
05-03-2026

$ 20.79 USD

Add to Wish List

Qty

Sale - Save 20%

$ 25.99

This product was last offered at the strikethrough price on
05-03-2026

$ 20.79 USD

Add to Wish List

Rear subframe bushings are a common failure point, creating a clunking condition and unwarranted subframe shifting under load. Replace your bad bushings with these new units from Bavarian Autosport.