Ohlins Racing has a long history dating back to 1976 of providing premium motorcycle and automotive suspension systems to numerous racing teams, individual racers, and OE brands such as BMW Motorsport, Audi, Lamborghini. Pagani, Ducati and Kawasaki. Over time, thanks to extensive R&D, testing, and tuning, their products have evolved into some of the highest quality suspension systems in the world, providing years of flawless operation on both the street and the track.

Ohlins' latest automotive suspension system, the DFV (Dual Flow Valve) Road and Track Coilover Kit, has bridged the gap between comfortable stock suspension and track focused coilover kits. These kits provide a ride that glides over typical bumps and dips in the road, all without the typical hard rattle and harsh feel of usual coilovers, and turn in tight and maintain tire grip and traction in corners significantly better than stock suspension ever could. This is all thanks to the spring rate chosen and Ohlins and their signature Dual Flow Valve. The DFV maintains comfort and agility by giving the same characteristics for both rebound and compression, allowing the wheel and tire to maintain constant contact with the road/track for maximum control.

The Dual Flow Valve works by controlling shock fluid flow based on resistance and impact velocity. This is controlled in both compression and rebound, giving the quick shock operation that helps maintain traction. At low shaft travel speeds, oil flows mostly through the shaft jet bleed. At higher shaft speeds, oil flows mostly through the compression/rebound ports in the piston. At very high shaft speeds, or during sudden accelerations from potholes or large bumps in the road, oil can then escape through the ports in the DFV, absorbing a large amount of energy that would otherwise throw off the balance and control of the vehicle and keeping the tire planted firmly on the ground. With all three compression and rebound ports working together according to pressure and shaft speed, the result is the notorious premium suspension feel that only Ohlins can offer.

In addition to managing the rebound and compression control, coilovers must also properly address heat changes in the shock oil. As the shock is pushed harder and longer, the oil quickly heats up due to friction and compression, and the oils flow characteristics change. The hotter the oil is, the easier it is for it to travel through ports and valves. To prevent this typical fade in control, Ohlins has implemented a temperature controlled needle bleed valve system that will expand as temperatures rise, slowly increasing restriction in the fluids flow through the valve gap. This produces a consistent dampening rate that maintains the vehicle's suspension characteristics lap after lap, turn after turn, no matter how hard you push your suspension's capabilities.

Features:

• DFV (Dual Flow Valve)
• Adjustable ride-height
• Fully rebuildable
• Corrosion salt spray tested (ISO 9227)
• Includes hardware and installation instructions
• 2 year Limited Warranty

Specs:

• Front Spring Rating: 343 lbs/in  ( 6 kg/mm)
• Rear Spring Rating: 686 lbs/in  ( 12 kg/mm)

*Now available are optional EDC Cancellation Modules that will prevent any lights or issues with suspension control systems. Turner Motorsport recommends purchasing these in addition to the suspension kit to get the most out of your Ohlins suspension system.

Find installation instructions HERE.
Find owner's manual HERE.

Fits the following BMWs:
2008-2013 E9X BMW M3

TC Kline Racing, a leader in BMW performance parts, delivers unparalleled street and track performance with their Double-Adjustable Coilover Suspension Kit for the E36 3er. This kit combines cutting-edge technology and premium materials to elevate your driving experience to new heights.

Key Features:

Smart Shock technology for optimal performance VVS alloy springs (300# front, 400# rear) Koni double-adjustable cartridges for seamless street to race transitions Camber/caster plates for supreme adjustability Ride height adjustability for personalized setup BUNA rubber RSMs for reduced flex This comprehensive kit includes:

8711-1007LSPTC - TCK/Koni Coilover Driver’s Side Strut 8711-1007RSPTC – TCK/Koni Coilover Passenger’s Side Strut TCKFSXXXS – TCK VVS Alloy Short Front Springs (300#F/400#R) 8242-1007L/RSPTC – TCK/Koni Double Adjustable Rear Shocks TCKRSXXX – TCK VVS Alloy Rear Springs (customized rates) TCKRUM12R – Pair of Reinforced BUNA Rubber Shock Mounts (12mm sleeve) TCKRSA – Pair of TCK Rear Spring Adjusters Camber Plates - 1 pair Experience the ultimate blend of performance and value with TC Kline Racing's Double-Adjustable Coilover Suspension Kit.

H&R PCS Street Performance Coil Overs are engineered for the street. Designed for the enthusiast who desires a manual shock damping feature, these state-of-the-art inverted mono-tube dampers feature adjustable ride height and precision external adjustment knobs allowing simultaneous adjustment of rebound and compression damping. The bias between rebound and compression is perfectly balanced and has been designed by H&R engineers to eliminate any undesirable settings and guesswork. Unlike traditional twin-tube shock absorbers, H&Rs mono-tube gas shock absorbers eliminate foaming of the damper oil even under extreme conditions and are lighter weight which reduces un-sprung weight.

H&R PCS Street Performance Coil Overs for E36 3 series will provide a lowering range of approximately 1.0 to 1.9 inches front and 1.0 to 1.6 inches rear. Lowering your BMW with H&R improves handling and provides that cool H&R stance.

SPECIAL PRICING FOR A VERY LIMITED TIME! 
FREE GROUND SHIPPING 

Height adjustment range:
F: -1.0-1.9"
R: -1.0-1.6"

This coilover kit fits the following BMWs:
6/1992-1998 E36 BMW 323is 325i 325is 328i 328is

Our sealed Monoball Rear Trailing Arm Bushings (RTAB) are the best solution for completely eliminating deflection and unwanted toe changes on the rear of the E36, E46, and Z4. While rubber and urethane bushings flex during load, the toe can change widely giving you nervous and unpredictable handling. These RTABs have a solid aluminum housing with a high-quality sealed OE bearing. These bushings were developed from years of competition use in various racing and HPDE events. There is simply no better RTAB unless your racing class rules prohibit the use of mono or spherical bearings.

The rear trailing arm bushings take a lot of abuse from acclerating, braking and cornering. The stock rubber bushings are just not up to the task of keeping rear wheel alignment in spec for very long, especially if you have upgraded to stickier tires and a better suspension. The pliable rubber flexes and twists which slows down reaction time and leaves you with a car that feels nervous and 'tail happy'. Urethane helps to control the alignment but issues with fitment, maintenance, and longevity keep us from recommending urethane on anything but a street car. We also offer a Delrin RTAB for cars that must conform to certain racing class rules. These sealed spherical bearings are the best at controlling rear toe alignment.

Our aluminum RTABs are very well made - high grade aluminum alloy and steel CNC'd out of a billet by an ISO 9001 certified manufacturer, each component is either hardcoated or nickel plated. While multiple manufacturers offer two piece designs, our research showed that a one piece bushing is a better design featuring a sealed bearing to keep contaminants out extending the life of the bearing.

Features:

Key Benefits:

• Rear Trailing Arm Monoball eliminates unwanted deflection, maintaining alignment settings and minimizing wheel hop.
• Allows full rear trailing arm articulation for low friction movement and eliminates binding found in rubber and poly bushings.
• Completely streetable: utilizes an OES Lemforder brand sealed, greased ball joint for an extremely long service life with no increase to NVH.

Design Features:

• Housing: Billet CNC 6061-T6 aluminum, type II anodized for exceptional durability and corrosion resistance
• Bearing: OE Mercedes/lemforder 2043520027 Sealed ball joint
• Bearing inserts: CNC machined 303 stainless steel.
• Rebuildable

Clickhere for installation instructions.

This item fits the following BMWs:
1992-1998 E36 BMW 318i 318is 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
1999-2005 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi M3
2003-2008 Z4 BMW Z4 2.5i Z4 3.0i Z4 3.0si Z4 M Roadster M Coupe