Find Parts That Fit Your Vehicle

BMW Suspension Parts

Your BMW's handling is determined by the capabilities and age of your suspension components. Our selected aftermarket performance suspension like coilovers, lowering springs, cup kits, and dampers can improve the handling of your BMW dramatically. With those upgrades comes the needs for proper adjustment; our recommended supporting modifications comes stiffer sway bars, bushings, and adjustable camber/caster plates, to name a few found on this page. Completely build your suspension for the most competitive BMW driving experience, achieve your perfect look, or simply replace your worn suspension with our recommended parts.

Sub-Categories

Sort By:

Condor Speed Shop - Corporate Logo
T#:577554
Part#: SPGPAD
Ships in 3 Business Days
$ 49.99 USD
Free Shipping on orders $49 and up
Designed to replace the stock rubber pads. Use them to adjust the ride height on the rear of your e30, e36 318ti or z3. Each set includes 3 pairs of pads of varying thickness (3.5mm, 5mm & 6mm). Use the thinnest pad for the lowest setting, or stack all 3 to raise the rear almost 15mm.
Show More Show Less
IRP - Individual Racing Parts - Corporate Logo
T#:5282924
Part#: IRPRSMP-30
In Stock
$ 27.99 USD
Free Shipping on orders $49 and up
IRP (Individual Race Parts) is a performance aftermarket parts company that focuses on high quality and long term reliability. Rear shock mount reinforcement plates by IRP that fit a large number of E chassis 3 series cars between E30, E36, E46 and also the Z3 and Z4.
Show More Show Less
Condor Speed Shop - Corporate Logo
T#:578193
Part#: DIFSTKT-1
In Stock
$ 32.00 USD
Free Shipping on orders $49 and up
Condor Speed Shop took the hard work out of removing and reinstalling your differential! If you've ever taken out your diff, you know how much of a pain it is to get the bolt holes to line up during re-installation. They never seem to line up perfectly, and getting the bolts to go in can be time-consuming. Condor's diff studs are designed to make your life a little easier. The diff will line up and lift right into the holes every time. 38mm studs are used with OEM or regular subframe bushings. 45mm studs are used with the 12mm riser subframe bushings. You'll need to pull the driveshaft to drop the diff. Use thread locker during install. Recommended for street or race use. Kit includes: 4 Studs 4 Washers 4 Lock Nuts
Show More Show Less

IRP - Individual Racing Parts - Corporate Logo
T#:39025510
Part#: IRPDTM-30B
In Stock
$ 542.99 USD
Free Shipping on orders $49 and up
Upgrade your rear trailing arms with this DTM-style adjustment kit from IRP. This kit replaces the stock bushing side of the rear trailing arm - requires cutting of the rear trailing arm and welding of the new bushings in place. Professional installation is highly recommended.
Show More Show Less

Condor Speed Shop - Corporate Logo
T#:40917450
Part#: RTAMB-E36-E46
In Stock at Vendor
$ 265.00 USD
Free Shipping on orders $49 and up
Condor Speed Shop collaborated with Syncro Design Works to create these new Monoball Rear Trailing Arm Bushings designed for the track! While also at home on the street, these performance bushings are designed to handle the stresses of the track, offering a full range of articulation for optimal suspension geometry and a sealed design for maintenance-free operation and a long life. SDW's' own 410hp shop track/streetcar still has the original prototype bearing installed in 2009, with no measurable toe deflection. Condor RTAMBs are precision CNC machined and hard coat anodized to protect against corrosion, moisture, and salt spray. They come fully assembled and ready to install. NOTE: Professional installation recommended. These bushings must be pressed into the factory Rear Trailing Arms.
Show More Show Less
Emmanuele Design - Corporate Logo
T#:23218024
Part#: EMD-F87-LS
In Stock
$ 349.00 USD
Free Shipping on orders $49 and up
Provides lowering of 1.3" in the front and 0.9" in the rear. Emmanuele Design's lowering springs are properly matched to the factory dampers, ensuring a ride quality that is slightly stiffer than stock, but predictable in nature.
Show More Show Less

Condor Speed Shop - Corporate Logo
T#:577570
Part#: REIPLTRTAB36
Ships in 3 Business Days
$ 49.00 USD
Free Shipping on orders $49 and up
Condor's Rear Trailing Arm Pocket Reinforcement Kit is one of the few kits in which the plate is not cut in the shape of a "C". A lot of companies cut them with an opening in order to have less waste when cutting. Their plates are fully connected all the way around making them stronger. This is a must-have reinforcement. The front mounting point of the rear trailing arm is a known area of failure on track driven E36s. Condor's 2-piece reinforcement plate kit reinforces the stock pocket bungs to prevent failure. Welding is required, includes rosette holes. *Does not fit 318ti.
Show More Show Less
Emmanuele Design - Corporate Logo
T#:35154916
Part#: EMD-G80-LS
Ships in 1 Business Day
$ 349.00 USD
Free Shipping on orders $49 and up

After much anticipation, we are pleased to release our lowering spring kit for the BMW M3 G80 platform! Taking our experience from our highly popular F80 springs, the goal with this offering was to lower the M3 by a tasteful amount while keeping ride quality the same or better than stock. After multiple prototypes and valuable user feedback, we believe that we met our goal. 

Our lowering springs are specifically designed to utilize the factory dampers. They are fully compatible with both standard as well as adaptive suspension. Each spring is made in the USA to our unique specifications for rates and geometries. The springs are made of high tensile chrome silicon and each unit is shot peened, pre-set, and 100% tested to ensure all the critical dimensions and rate/loads are within tolerance. The springs are then powder-coated with a stealth black finish for an OEM appearance.

Front Lowering: 1.4"

Rear Lowering: 0.7"

Stock Front Rate: 186 lb./in.

EMD Auto Front Rate: 194 lb./in.

Stock Rear Rate: 608 lb./in.

EMD Auto Rear Rate: 645 lb./in.

Show More Show Less

Condor Speed Shop - Corporate Logo
T#:40782367
Part#: CONTROLBUSHOFF46
Ships in 2 Business Days
$ 95.00 USD
Free Shipping on orders $49 and up
$ 95.00 USD
Free Shipping on orders $49 and up
Polyurethan bushings with a offset insert for control arm.

Condor Speed Shop - Corporate Logo
T#:597365
Part#: TRANSIX_F2XF3X
In Stock at Vendor
$ 34.00 USD
Free Shipping on orders $49 and up
These UHMW race grade transmission mounts are the ultimate solution to keep your transmission from moving under heavy load or acceleration. Transmission movement or "play" can cause missed shifts and extreme mechanical damage in some cases.
Show More Show Less
Emmanuele Design - Corporate Logo
T#:35154917
Part#: EMD-G87-LS
Ships in 9 Business Days
$ 349.00 USD
Free Shipping on orders $49 and up

After much anticipation, we are pleased to release our lowering spring kit for the BMW M2 G87 platform! Taking our experience from our highly popular F-chassis offerings, the goal with this offering was to lower the M2 by a tasteful amount while keeping ride quality the same or better than stock. After multiple prototypes and valuable user feedback, we believe that we met our goal. 

Our lowering springs are specifically designed to utilize the factory dampers. They are fully compatible with both standard as well as adaptive suspension. Each spring is made in the USA to our unique specifications for rates and geometries. The springs are made of high tensile chrome silicon and each unit is shot peened, pre-set, and 100% tested to ensure all the critical dimensions and rate/loads are within tolerance. The springs are then powder-coated with a stealth black finish for an OEM appearance.

Front Lowering: 1.3"

Rear Lowering: 0.75"

Stock Front Rate: 186 lb./in.

EMD Auto Front Rate: 194 lb./in.

Stock Rear Rate: 608 lb./in.

EMD Auto Rear Rate: 645 lb./in.

Show More Show Less
Condor Speed Shop - Corporate Logo
T#:587122
Part#: DIFE30
Ships in 2 Business Days
$ 55.00 USD
Free Shipping on orders $49 and up
Condor Speed Shop's E30 solid differential bushing is designed for the street and the track. They use UHMW in all of their suspension bushings because it is stiff, has almost zero deflection yet also absorbs some vibration. It will outlast other types of rubber or urethane bushings. With their solid diff bushing, you won't have to worry about any more rubbery flex in your diff during hard acceleration.
Show More Show Less


Condor Speed Shop - Corporate Logo
T#:597363
Part#: TRANSIX_E39P
Ships in 1 Business Day
$ 35.00 USD
Free Shipping on orders $49 and up
The 70A poly mounts are the solution if you are trying to minimize vibration and NVH. They are currently the softest polyurethane mounts on the market. We suggest these for all street cars. If you are building a track car, check out the solid UHMW transmission mounts from Condor Speed Shop.
Show More Show Less
IRP - Individual Racing Parts - Corporate Logo
T#:2408491
Part#: IRPRSB-90PU
Special Order: No Guaranteed ETA
$ 169.00 USD
Free Shipping on orders $49 and up
Replacing your worn stock rubber subframe bushings with IRP's polyurethane bushing set will transform the way your car drives. Stiffer than stock, these bushings still absorb NVH which allows them to be comfortably used on the street without heavily reducing ride quality.
Show More Show Less
IRP - Individual Racing Parts - Corporate Logo
T#:26871572
Part#: IRPACNA-FXMS
Special Order: No Guaranteed ETA
$ 418.99 USD
Free Shipping on orders $49 and up
IRP has been a leader in performance BMW suspension upgrades and has released a new line of suspension components for BMW's F-Chassis cars. Included are FLURO Motorsports Bearings for unmatched performance and reliability on the street or track!
Show More Show Less

IRP - Individual Racing Parts - Corporate Logo
T#:26871574
Part#: IRPRAUCA-FXMS
Special Order: No Guaranteed ETA
$ 418.99 USD
Free Shipping on orders $49 and up
IRP has been a leader in performance BMW suspension upgrades and has released a new line of suspension components for BMW's F-Chassis cars. Included are FLURO Motorsports Bearings for unmatched performance and reliability on the street or track!
Show More Show Less

IRP - Individual Racing Parts - Corporate Logo
T#:26871571
Part#: IRPRATA-FXMS
Special Order: No Guaranteed ETA
$ 442.99 USD
Free Shipping on orders $49 and up
IRP has been a leader in performance BMW suspension upgrades and has released a new line of suspension components for BMW's F-Chassis cars. Included are FLURO Motorsports Bearings for unmatched performance and reliability on the street or track!
Show More Show Less
IRP - Individual Racing Parts - Corporate Logo
T#:4469705
Part#: IRPLCA-FXMAL
Special Order: No Guaranteed ETA
$ 518.99 USD
Free Shipping on orders $49 and up
Looking to convert your M-car to a true coilover suspension in the rear? Then you'll want these camber arms! These control/camber arms replace the standard rear control arms that normally work with the barrel springs, eliminating a ton of extra weight and cleaning up the rear suspension. The simple design of these camber arms also allows for more room to work and increased clearance, setting you up perfectly for your rear coilover conversion! *Does not fit with original springs – coilovers must be used to install these arms!
Show More Show Less

IRP - Individual Racing Parts - Corporate Logo
T#:2408474
Part#: IRPRSB-90AL
Special Order: No Guaranteed ETA
$ 319.99 USD
Free Shipping on orders $49 and up
Aluminum subframe bushings prevent your subframe from shifting around as the chassis bends under load, unlike the stock rubber bushings. With only a slight increase in NVH, these aluminum bushings from IRP will keep the rear end of your BMW substantially more planted.
Show More Show Less
IRP - Individual Racing Parts - Corporate Logo
T#:2408494
Part#: IRPRSB-90MAL
Special Order: No Guaranteed ETA
$ 294.99 USD
Free Shipping on orders $49 and up
Aluminum subframe bushings prevent your subframe from shifting around as the chassis bends under load, unlike the stock rubber bushings. With only a slight increase in NVH, these aluminum bushings from IRP will keep the rear end of your BMW substantially more planted.
Show More Show Less