Find Parts That Fit Your Vehicle

BMW Suspension Parts

Your BMW's handling is determined by the capabilities and age of your suspension components. Our selected aftermarket performance suspension like coilovers, lowering springs, cup kits, and dampers can improve the handling of your BMW dramatically. With those upgrades comes the needs for proper adjustment; our recommended supporting modifications comes stiffer sway bars, bushings, and adjustable camber/caster plates, to name a few found on this page. Completely build your suspension for the most competitive BMW driving experience, achieve your perfect look, or simply replace your worn suspension with our recommended parts.

Sub-Categories

Sort By:

Packaged by Turner - Corporate Logo
T#:11986
Part#: E9X-URSM
In Stock
Sale - Save 2% $ 49.12

This product was last offered at the strikethrough price on
05-03-2026

$ 48.01 USD
Free Shipping on orders $49 and up
Sale - Save 2%
$ 49.12

This product was last offered at the strikethrough price on
05-03-2026

$ 48.01 USD
Free Shipping on orders $49 and up
A 4-piece set of new OEM rear upper and lower shock mounts to complete your shock install or replace broken mounts (RSM). The top mounts on the shocks for the E82 and E90/E91/E92/E93 consist of 4 pieces. These E9X URSM pieces fit all E82 and E9X except the M3 with EDC.

Rear Shock Mount (RSM) Kit consists of:
A. rear upper-top shock mounts, 33506771737
B. rear upper-middle shock mounts, 33506767010
C. rear upper-bottom shock mounts, 33506771738
D. rear upper supporting cup, 33526764418 (sits over bumpstop)
There is also a lower mount that is available separately. This package covers only the rear upper shock mounts.

That's a lot of rubber that takes constant deflecting and absorbing of cornering forces and impacts from bumps, potholes, etc. Replacing the RSMs is key to maintaining a quiet and comfortable ride. Price is for all 4 upper pieces for BOTH sides of the car.

This item fits the following BMWs:
2006-2011 E90 BMW 325i 325xi 328i 328xi 328i xDrive 330i 330xi 335d 335i 335xi 335i xDrive - Sedan
2006-2011 E91 BMW 325xi 328i 328xi 328i xDrive - Wagon
2007-2012 E92 BMW 328i 328xi 328i xDrive 335i 335is 335xi 335i xDrive - Coupe
2007-2012 E93 BMW 328i 335i - Convertible
Show More Show Less
Active Autowerke - Corporate Logo
T#:4070463
Part#: F-BRACE
Ships in 1 Business Day
$ 99.00

This product was last offered at the strikethrough price on
02-23-2026

$ 94.00 USD
Free Shipping
$ 94.00 USD
Free Shipping

BMW F8X M2 M3 M4 Chassis Bracing

The BMW F8X M2 M3 M4 Chassis Bracing is designed to enhance the rigidity and stability of the chassis, providing improved handling and performance for your BMW. Turner Motorsport offers this high-quality brace to support better driving dynamics and reduced flex during aggressive driving.

Benefits:

  • Enhanced Rigidity: Significantly increases chassis stiffness, leading to improved handling and reduced body roll.
  • Improved Stability: Minimizes chassis flex for more precise steering responses and better overall control.
  • High-Quality Construction: Made from durable materials to ensure long-lasting performance and reliability.
  • Easy Installation: Designed for straightforward installation with minimal modifications required.
  • Optimized Performance: Perfect for both street and track use, enhancing the driving experience and vehicle performance.
Show More Show Less
Revshift - Corporate Logo
T#:1105927
Part#: BTA-E9X
Ships in 3 Business Days
$ 249.99 USD
Free Shipping
$ 249.99 USD
Free Shipping
These billet aluminum rear trailing arms fit the BMW E9x and E8x including the M models. They are CNC machined from 6061-T6 aluminum and are protected by a black anodized hardcoat. These trailing arms replace the flimsy stamped oem part, stiffen the rear suspension, and improve the vehicle's handling. Revshift Performance Engineering is a high-performance parts manufacturer with a focus on quality, reliability, and performance. Utilizing high-precision machining technologies and their very own Polyurethane Manufacturing Department, every Revshift product is designed, manufactured, and tested in-house at their Detroit, Michigan facility.
Show More Show Less

Revshift - Corporate Logo
T#:27405530
Part#: SBRC-E46-80A
Ships in 1-3 days
$ 249.99 USD
Free Shipping on orders $49 and up

Upgrade your E46's rear subframe with the Revshift Combo Kit, featuring 80A durometer polyurethane rear subframe bushings and a comprehensive weld-in reinforcement plate kit. Designed to address the notorious cracking and ripping of rear subframe mounting points over time, this kit provides a robust solution to prevent costly damage to your vehicle.

Key Features:

Complete Solution: Includes 80A durometer polyurethane rear subframe bushings and precision laser-cut 14-gauge steel reinforcement plates for comprehensive subframe reinforcement. Prevents Damage: Weld-in reinforcement plates protect against cracks and damage to the chassis, ensuring long-term durability and stability. Enhanced Handling: Revshift polyurethane rear subframe bushings replace OEM rubber bushings, stiffening mounting points to improve handling and performance. Durable Construction: Polyurethane bushings are designed to last and do not wear out like rubber OEM bushings, providing consistent performance over time. Proper Dampening: Polyurethane bushings properly dampen the rear subframe, enhancing overall vehicle stability and control. Benefits:

Improved handling capabilities Long-lasting durability compared to OEM rubber bushings Protection against bending or cracking of subframe mounts The comprehensive kit includes all necessary components for installation Upgrade your E46's rear subframe with the Revshift Combo Kit for superior handling, durability, and protection against chassis damage. Boost your driving experience with enhanced performance and stability.

Show More Show Less

Revshift - Corporate Logo
T#:27405529
Part#: SBRC-E46-95A
Ships in 7 Business Days
$ 249.99 USD
Free Shipping on orders $49 and up

Upgrade your E46's rear subframe with the Revshift Combo Kit, featuring 80A durometer polyurethane rear subframe bushings and a comprehensive weld-in reinforcement plate kit. Designed to address the notorious cracking and ripping of rear subframe mounting points over time, this kit provides a robust solution to prevent costly damage to your vehicle.

Key Features:

Complete Solution: Includes 95A durometer polyurethane rear subframe bushings and precision laser-cut 14-gauge steel reinforcement plates for comprehensive subframe reinforcement. Prevents Damage: Weld-in reinforcement plates protect against cracks and damage to the chassis, ensuring long-term durability and stability. Enhanced Handling: Revshift polyurethane rear subframe bushings replace OEM rubber bushings, stiffening mounting points to improve handling and performance. Durable Construction: Polyurethane bushings are designed to last and do not wear out like rubber OEM bushings, providing consistent performance over time. Proper Dampening: Polyurethane bushings properly dampen the rear subframe, enhancing overall vehicle stability and control. Benefits:

Improved handling capabilities Long-lasting durability compared to OEM rubber bushings Protection against bending or cracking of subframe mounts The comprehensive kit includes all necessary components for installation Upgrade your E46's rear subframe with the Revshift Combo Kit for superior handling, durability, and protection against chassis damage. Boost your driving experience with enhanced performance and stability.

Show More Show Less
Revshift - Corporate Logo
T#:582005
Part#: PTABE6GREEN
Ships in 1 Business Day
$ 79.99 USD
Free Shipping
$ 79.99 USD
Free Shipping
Utilizing high-precision machining technologies and their very own Polyurethane Manufacturing Department, every Revshift product is designed, manufactured, and tested in-house at their Detroit, Michigan facility.
Show More Show Less

Revshift Rear Shock Mount Kit - 80A - BMW E30 E36 E46 Z3
For shocks with a standard 10mm pin diameter
Revshift - Corporate Logo
T#:1105924
Part#: RSM-E6-10MM
Ships in 1-2 days
$ 99.99 USD
Free Shipping
$ 99.99 USD
Free Shipping
Revshift rear shock mounts are CNC machined from 6061 billet aluminum and hard anodized black for protection. They are fitted with our highest quality 80A polyurethane bushings and chromoly sleeves. The class 10.9 hardware is zinc plated for corrosion resistance. These rear shock mounts can be rebuilt with one of our refresh kits sold separately. Fitment: BMW E30, E36, E46, Z3, and Z4. All OEM and aftermarket rear shocks with 10mm threads.
Show More Show Less
Active Autowerke - Corporate Logo
T#:397248
Part#: 13-004
Ships in 7 Business Days
5% off MSRP $ 429.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 408.00 USD
Free Shipping
5% off MSRP
$ 429.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 408.00 USD
Free Shipping

The main mounting bolt for the differential in the E36 is susceptible to shearing off during extreme driving conditions. This can cause internal damage to your diff, leaving you stranded at the track or on the side of the road. Active Autowerke's differential support bracket eliminates this issue forever in under an hour installation.

 

Previously used Active Autowerke Part Number AA-DSB-E36

This product fits the following BMWs:
1992-1999 E36 323i 325i 328i M3

Show More Show Less

Revshift - Corporate Logo
T#:582007
Part#: PSBE36GREEN
Ships in 3 Business Days
$ 159.99 USD
Free Shipping
$ 159.99 USD
Free Shipping
Utilizing high-precision machining technologies and their very own Polyurethane Manufacturing Department, every Revshift product is designed, manufactured, and tested in-house at their Detroit, Michigan facility.
Show More Show Less

Revshift - Corporate Logo
T#:582006
Part#: PTABE30GREEN
In Stock
$ 79.99

This product was last offered at the strikethrough price on
08-12-2026

$ 72.99 USD
Limited Qty Sale
Free Shipping
$ 79.99

This product was last offered at the strikethrough price on
08-12-2026

$ 72.99 USD
Limited Qty Sale
Free Shipping
Utilizing high-precision machining technologies and their very own Polyurethane Manufacturing Department, every Revshift product is designed, manufactured, and tested in-house at their Detroit, Michigan facility.
Show More Show Less
Revshift - Corporate Logo
T#:582015
Part#: PCABE30BLACK
Ships in 1 Business Day
$ 49.99 USD
Free Shipping on orders $49 and up
Utilizing high-precision machining technologies and their very own Polyurethane Manufacturing Department, every Revshift product is designed, manufactured, and tested in-house at their Detroit, Michigan facility.
Show More Show Less
Active Autowerke - Corporate Logo
T#:397247
Part#: 13-005
Ships in 3 Business Days
5% off MSRP $ 149.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 142.00 USD
Free Shipping
5% off MSRP
$ 149.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 142.00 USD
Free Shipping

One of the most common issues with the E46 is that the subframe likes to tear away from the chassis. Fix this by welding in a Rear Subframe reinforcement kit.

  • Includes all necessary reinfored metal plates
  • Professional installation is required
  • Suspension must be realigned after installation

Fits the following BMWs:
1998 - 2006 E46 320i 323i 325i 325xi 328i 330i 323ci 325ci 330ci M3 

Show More Show Less


Revshift - Corporate Logo
T#:1105909
Part#: RBK-E3095A
Ships in 5 Business Days
$ 199.99 USD
Free Shipping
$ 199.99 USD
Free Shipping
Utilizing high-precision machining technologies and their very own Polyurethane Manufacturing Department, every Revshift product is designed, manufactured, and tested in-house at their Detroit, Michigan facility.
Show More Show Less
Revshift - Corporate Logo
T#:582008
Part#: PSBE36BLACK
Ships in 2 Business Days
$ 159.99 USD
Free Shipping
$ 159.99 USD
Free Shipping
Utilizing high-precision machining technologies and their very own Polyurethane Manufacturing Department, every Revshift product is designed, manufactured, and tested in-house at their Detroit, Michigan facility.
Show More Show Less
Revshift Rear Shock Mount Kit - 80A - BMW E30 E36 E46 Z3
For shocks with a larger 12mm pin diameter
Revshift - Corporate Logo
T#:1105925
Part#: RSM-E6-12MM
Ships in 2 Business Days
$ 99.99 USD
Free Shipping
$ 99.99 USD
Free Shipping
Revshift rear shock mounts are CNC machined from 6061 billet aluminum and hard anodized black for protection. They are fitted with our highest quality 80A polyurethane bushings and chromoly sleeves. The class 10.9 hardware is zinc plated for corrosion resistance. These rear shock mounts can be rebuilt with one of our refresh kits sold separately. Fitment: BMW E30, E36, E46, Z3, and Z4. All OEM and aftermarket rear shocks with 12mm threads.
Show More Show Less

Revshift - Corporate Logo
T#:1105899
Part#: FBK-E36C95A
Ships in 5 Business Days
$ 379.99 USD
Free Shipping
$ 379.99 USD
Free Shipping
Utilizing high-precision machining technologies and their very own Polyurethane Manufacturing Department, every Revshift product is designed, manufactured, and tested in-house at their Detroit, Michigan facility.
Show More Show Less

Revshift - Corporate Logo
T#:1105916
Part#: PSB-E3095A
Ships in 7 Business Days
$ 89.99 USD
Free Shipping
$ 89.99 USD
Free Shipping
Utilizing high-precision machining technologies and their very own Polyurethane Manufacturing Department, every Revshift product is designed, manufactured, and tested in-house at their Detroit, Michigan facility.
Show More Show Less
Garagistic - Corporate Logo
T#:4126631
Part#: K0018-80
In Stock
$ 89.00 USD
Free Shipping
$ 89.00 USD
Free Shipping
These are Gargistic's original poly rear subframe bushings and are modified replacements that will not only reduce play in the rear suspension components substantially compared to the old and mushy OEM rubber bushings, but the "raised" design will move the subframe up 12mm to help correct some of the unwanted camber and toe that comes from lowering an E30. This has a similar effect to raising the suspension so the rear geometry resembles that of a stock height E30. The 12mm raised bushing's average geometry correction (camber and toe) is from -5 degrees to -1.5 degrees depending on your suspension setup. These bushings are slightly stiffer than the OEM units which will cause a tiny bit more NVH to be transferred through the chassis, but the benefits greatly outweigh the small sacrifice in comfort. 80A is the softest poly bushing in Garagistic's lineup and are perfect for a street performance E30 that will see the occasional autocross or track day. We highly recommend professional installation as these will require a press to install as well as remove your old bushings NOTE: When installing Garagistic raised subframe bushings, the differential mount will no longer line up with the mounting provision on the chassis, but there are a couple of solutions for this! The first option is to install extended studs and spacers onto the differential. This will effectively space the differential back down 12mm from the raised subframe back into the factory position. This will allow the use of a standard centered differential bushing and maintains the factory driveline geometry. The second option is to simply run an offset differential bushing. This will allow the differential to be mounted to the subframe in the factory orientation and the repositioned hole in the differential bushing to line up with the factory bracket. This will change the driveline geometry in the rear! Garagistic have used both methods with success on street and track applications. Includes: 2 Raised E30 Rear Subframe Bushings 2 Inner Races Lifetime Warranty! Compatibility: Fits BMW 3 Series E30 (318, 323, 325 & M3) - DOES NOT FIT iX models Replaces OEM Part Number 33311129144 (33-31-1-129-144)
Show More Show Less

Advanced Auto Fabrication - Corporate Logo
T#:7593092
Part#: 11629
Ships in 3 Business Days
$ 299.00

This product was last offered at the strikethrough price on
05-03-2026

$ 285.99 USD
Limited Qty Sale
Free Shipping
$ 299.00

This product was last offered at the strikethrough price on
05-03-2026

$ 285.99 USD
Limited Qty Sale
Free Shipping
Since 2010, Advanced Auto Fabrication has been producing and developing both parts and full fledged race cars. Their knowledge base covers a wide range of vehicles both domestic and imported. In the specific case of BMW, the team at AAF has a particular affinity for building and designing components for BMW race cars. E30 race engines can be expensive, so protect your investment! AAF's skid plates have proven their durability on the track. Made from precision cut steel plate, welded in house at AAF, and Powder coated for the most robust surface finish. The AAF E30 Skid Plate is a MUST-HAVE for all PRO3 and E30 Race cars. This skid plate does not use steering rack bolts, so the skid plate can be taken on and off without removing critical bolts or changing wheel alignment like other skid plates. Made specifically for an M20, (with a dimpled relief for the oil drain port, and strong gussets on both sides of the oil pan) but can be used on any E30. Includes a nut plate for ease of installation. Comes with all required hardware. Some drilling required.
Show More Show Less
Active Autowerke - Corporate Logo
T#:25109039
Part#: AAG8XGBRACE
Ships in 3 Business Days
$ 284.99 USD
Free Shipping
$ 284.99 USD
Free Shipping
Active Autowerke designed this piece to allow for more clearance with aftermarket mid-pipes. Factory clearance is tight and not conducive for larger than factory diameter piping. This piece allows for more clearance without sacrificing any structural rigidity and is made from high-strength 6061 aluminum to match the strength of the OEM brace.
Show More Show Less

Revshift - Corporate Logo
T#:1980634
Part#: FBKOFFSET
Ships in 7 Business Days
$ 379.99 USD
Free Shipping
$ 379.99 USD
Free Shipping
Stiffen your suspension and improve your handling with these Revshift upgraded suspension bushings. Improves handing Will not wear out like oem bushings Properly dampens suspension components

Revshift - Corporate Logo
T#:582014
Part#: PCABE30GREEN
Ships in 7 Business Days
$ 49.99 USD
Free Shipping on orders $49 and up
Utilizing high-precision machining technologies and their very own Polyurethane Manufacturing Department, every Revshift product is designed, manufactured, and tested in-house at their Detroit, Michigan facility.
Show More Show Less
Revshift - Corporate Logo
T#:1105904
Part#: PSB-E46M
Ships in 7 Business Days
$ 189.99 USD
Free Shipping
$ 189.99 USD
Free Shipping
Utilizing high-precision machining technologies and their very own Polyurethane Manufacturing Department, every Revshift product is designed, manufactured, and tested in-house at their Detroit, Michigan facility.
Show More Show Less
Revshift - Corporate Logo
T#:1105926
Part#: ASB-E9X
Ships in 5 Business Days
$ 299.99 USD
Free Shipping
$ 299.99 USD
Free Shipping
Revshift billet aluminum subframe bushings completely replace the oem rubber bushings on the BMW E82, E90, E91, E92, and E93 including the M3, 1M, and XI models. These bushings solid mount the rear subframe reducing wheel hop and improving the vehicles handling capabilities. The two piece bushing design sandwiches the subframe locking it in place. It will not shift on the bushings while driving like the one piece designs allow. They are CNC machined at Revshift in the USA from 6061-T6 billet aluminum.
Show More Show Less


Revshift - Corporate Logo
T#:1105932
Part#: PSB-E3480A
Ships in 1 Business Day
$ 119.99 USD
Free Shipping
$ 119.99 USD
Free Shipping
Utilizing high-precision machining technologies and their very own Polyurethane Manufacturing Department, every Revshift product is designed, manufactured, and tested in-house at their Detroit, Michigan facility.
Show More Show Less
Revshift - Corporate Logo
T#:1105922
Part#: PSB-318TI95A
In Stock
$ 89.99

This product was last offered at the strikethrough price on
07-30-2026

$ 81.99 USD
Limited Qty Sale
Free Shipping
$ 89.99

This product was last offered at the strikethrough price on
07-30-2026

$ 81.99 USD
Limited Qty Sale
Free Shipping
Utilizing high-precision machining technologies and their very own Polyurethane Manufacturing Department, every Revshift product is designed, manufactured, and tested in-house at their Detroit, Michigan facility.
Show More Show Less
Revshift - Corporate Logo
T#:1105914
Part#: RBK-E3095A12MM
Ships in 7 Business Days
$ 224.99 USD
Free Shipping
$ 224.99 USD
Free Shipping
Utilizing high-precision machining technologies and their very own Polyurethane Manufacturing Department, every Revshift product is designed, manufactured, and tested in-house at their Detroit, Michigan facility.
Show More Show Less

Revshift - Corporate Logo
T#:1105917
Part#: PSB-E3012MM95A
Ships in 7 Business Days
$ 119.99 USD
Free Shipping
$ 119.99 USD
Free Shipping
Utilizing high-precision machining technologies and their very own Polyurethane Manufacturing Department, every Revshift product is designed, manufactured, and tested in-house at their Detroit, Michigan facility.
Show More Show Less

Revshift - Corporate Logo
T#:1105918
Part#: PSB-E30IX95A
Ships in 7 Business Days
$ 89.99 USD
Free Shipping on orders $49 and up
Utilizing high-precision machining technologies and their very own Polyurethane Manufacturing Department, every Revshift product is designed, manufactured, and tested in-house at their Detroit, Michigan facility.
Show More Show Less
Revshift - Corporate Logo
T#:47199273
Part#: PSB-E9X-95A
Ships in 1 Business Day
$ 249.99 USD
Free Shipping on orders $49 and up
Revshift polyurethane subframe bushings completely replace the OEM rubber bushings on the BMW E82, E81, E87, E88, E90, E91, E92, and E93, including the M3, 1M, and XI models. These bushings securely mount the rear subframe, reducing wheel hop and improving the vehicle's handling capabilities. The two-piece bushing design sandwiches the subframe, locking it in place. It will not shift on the bushings while driving, like the one-piece designs allow. They are entirely made at Revshift in the USA from our proprietary polyurethane formula and CNC-machined billet aluminum cores.
Show More Show Less

Revshift - Corporate Logo
T#:582013
Part#: PCABE30M3
Ships in 7 Business Days
$ 49.99 USD
Free Shipping on orders $49 and up
Utilizing high-precision machining technologies and their very own Polyurethane Manufacturing Department, every Revshift product is designed, manufactured, and tested in-house at their Detroit, Michigan facility.
Show More Show Less
Revshift - Corporate Logo
T#:582012
Part#: PCABE30M3GREEN
Ships in 7 Business Days
$ 49.99 USD
Free Shipping on orders $49 and up
Utilizing high-precision machining technologies and their very own Polyurethane Manufacturing Department, every Revshift product is designed, manufactured, and tested in-house at their Detroit, Michigan facility.
Show More Show Less

Bavarian Autosport - Corporate Logo
T#:578812
Part#: 010442
Special Order: No Guaranteed ETA
Sale - Save 3% $ 195.99

This product was last offered at the strikethrough price on
05-03-2026

$ 190.11 USD
Sale - Save 3%
$ 195.99

This product was last offered at the strikethrough price on
05-03-2026

$ 190.11 USD

Improve your BMW's handling! Bav's stress bar locks the top of your BMW's strut towers together to improve chassis stiffness and handling. The result is greater stability in hard cornering--a difference you can really feel, giving you greater confidence and control. Made of strong, lightweight aluminum, and it's manufactured in Germany.

From 1974 to 2019, Bavarian Autosport was one of the premier vendors for BMW and MINI auto parts. We are happy to preserve the Bav Auto legacy by continuing to carry their high-quality products into the future. All Bav Auto parts will remain unchanged in design and sourced from the same OEM suppliers to ensure long-lasting reliability. We trust these parts, accessories, and upgrades so confidently that we back every Bavarian Autosport branded component with a 2-year warranty.

Show More Show Less

Bavarian Autosport - Corporate Logo
T#:578621
Part#: B3300044
In Stock
Sale - Save 3% $ 8.99

This product was last offered at the strikethrough price on
05-03-2026

$ 8.68 USD
Free Shipping on orders $49 and up
Sale - Save 3%
$ 8.99

This product was last offered at the strikethrough price on
05-03-2026

$ 8.68 USD
Free Shipping on orders $49 and up
This is a direct replacement for the factory BMW rear shock mount reinforcement, as equipped by BMW on Z3 models. This also fits all E36 and E46 models as well. Turner Motorsport makes our own that are thicker but these can also do a good job of preventing cracks and deformation of the rear shock towers. Priced per reinforcement plate. Order 2 to cover both rear shock towers. From 1974 to 2019, Bavarian Autosport was one of the premier vendors for BMW and MINI auto parts. We are happy to preserve the Bav Auto legacy by continuing to carry their high-quality products into the future. All Bav Auto parts will remain unchanged in design and sourced from the same OEM suppliers to ensure long-lasting reliability. We trust these parts, accessories, and upgrades so confidently that we back every Bavarian Autosport branded component with a 2-year warranty. This item fits the following BMWs: 1992-1999 E36 BMW 318i 318is 318ti 318ic 323is 325i 325is 328i 328is M3 (not for convertible models) 1999-2006 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi M3 (not for convertible models) 1997-2002 Z3 BMW Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M Roadster M Coupe
Show More Show Less
Bavarian Autosport - Corporate Logo
T#:579752
Part#: 51569
In Stock
Sale - Save 80% $ 59.99

This product was last offered at the strikethrough price on
05-03-2026

$ 12.24 USD
Free Shipping on orders $49 and up
Sale - Save 80%
$ 59.99

This product was last offered at the strikethrough price on
05-03-2026

$ 12.24 USD
Free Shipping on orders $49 and up
Control arm with factory bushing for easy installation! If your control arm bushing is bad, it's worth buying this entire unit to save yourself time and money down the road.
AUTOTECKNIC - Corporate Logo
T#:42571263
Part#: BM-0619PDK
Ships in 7 Business Days
Starting at $ 295.00 USD
Free Shipping on orders $49 and up
Starting at $ 295.00 USD
Free Shipping on orders $49 and up


HKS - Corporate Logo
T#:588602
Part#: 80280-AT001
In Stock at Vendor
$ 1,000.00 USD
$ 1,000.00 USD
Advanced Auto Fabrication - Corporate Logo
T#:7624657
Part#: 116127
In Stock
$ 18.00 USD
Free Shipping on orders $49 and up
Since 2010, Advanced Auto Fabrication has been producing and developing both parts and full fledged race cars. Their knowledge base covers a wide range of vehicles both domestic and imported. In the specific case of BMW, the team at AAF has a particular affinity for building and designing components for BMW race cars. Steel car tie down loops are an easy way to add a strong tie down to you car. These tie down loops bolt right to your rear lower shock bolts or your front control arm rear mounts with just a longer bolt. Comes as a pair.
Show More Show Less
Revshift - Corporate Logo
T#:47199274
Part#: PSB-E9X-75D
Ships in 7 Business Days
$ 249.99 USD
Free Shipping on orders $49 and up
Revshift polyurethane subframe bushings completely replace the OEM rubber bushings on the BMW E82, E81, E87, E88, E90, E91, E92, and E93, including the M3, 1M, and XI models. These bushings securely mount the rear subframe, reducing wheel hop and improving the vehicle's handling capabilities. The two-piece bushing design sandwiches the subframe, locking it in place. It will not shift on the bushings while driving, like the one-piece designs allow. They are entirely made at Revshift in the USA from our proprietary polyurethane formula and CNC-machined billet aluminum cores.
Show More Show Less

Revshift - Corporate Logo
T#:47199272
Part#: PSB-E9X-80A
Ships in 1 Business Day
$ 249.99 USD
Free Shipping on orders $49 and up
Revshift polyurethane subframe bushings completely replace the OEM rubber bushings on the BMW E82, E81, E87, E88, E90, E91, E92, and E93, including the M3, 1M, and XI models. These bushings securely mount the rear subframe, reducing wheel hop and improving the vehicle's handling capabilities. The two-piece bushing design sandwiches the subframe, locking it in place. It will not shift on the bushings while driving, like the one-piece designs allow. They are entirely made at Revshift in the USA from our proprietary polyurethane formula and CNC-machined billet aluminum cores.
Show More Show Less

Revshift - Corporate Logo
T#:27405528
Part#: SBRC-E46-70D
Ships in 7 Business Days
$ 249.99 USD
Free Shipping on orders $49 and up

Upgrade your E46's rear subframe with the Revshift Combo Kit, featuring 75D durometer polyurethane rear subframe bushings and a comprehensive weld-in reinforcement plate kit. Designed to address the notorious cracking and ripping of rear subframe mounting points over time, this kit provides a robust solution to prevent costly damage to your vehicle.

Key Features:

Complete Solution: Includes 95A durometer polyurethane rear subframe bushings and precision laser-cut 14-gauge steel reinforcement plates for comprehensive subframe reinforcement. Prevents Damage: Weld-in reinforcement plates protect against cracks and damage to the chassis, ensuring long-term durability and stability. Enhanced Handling: Revshift polyurethane rear subframe bushings replace OEM rubber bushings, stiffening mounting points to improve handling and performance. Durable Construction: Polyurethane bushings are designed to last and do not wear out like rubber OEM bushings, providing consistent performance over time. Proper Dampening: Polyurethane bushings properly dampen the rear subframe, enhancing overall vehicle stability and control. Benefits:

Improved handling capabilities Long-lasting durability compared to OEM rubber bushings Protection against bending or cracking of subframe mounts The comprehensive kit includes all necessary components for installation Upgrade your E46's rear subframe with the Revshift Combo Kit for superior handling, durability, and protection against chassis damage. Boost your driving experience with enhanced performance and stability.

Show More Show Less

Packaged by Turner - Corporate Logo
T#:56001958
Part#: SPLRUAE9XKT2
Ships in 1 Business Day
New Item
$ 1,258.00 USD
Free Shipping on orders $49 and up
This premium SPL chassis upgrade kit is engineered to anchor your rear axle. Featuring SPL’s Titanium Series Rear Toe Arms with an eccentric lockout kit, alongside a complete 4 piece set of Rear Upper Wishbones and Guide Links
Show More Show Less
Active Autowerke - Corporate Logo
T#:51320825
Part#: 11-129
Ships in 3 Business Days
New Item
$ 332.00 USD
Free Shipping
$ 332.00 USD
Free Shipping
Active Autowerke designed this piece to allow for more clearance with aftermarket mid-pipes. Factory clearance is tight and not conducive for larger than factory diameter piping. This piece allows for more clearance without sacrificing any structural rigidity and is made from high-strength 6061 aluminum to match the strength of the OEM brace.
Show More Show Less

Bavarian Autosport - Corporate Logo
T#:579797
Part#: 52322
Special Order: No Guaranteed ETA
Sale - Save 20% $ 31.99

This product was last offered at the strikethrough price on
05-03-2026

$ 25.59 USD
Free Shipping on orders $49 and up
Sale - Save 20%
$ 31.99

This product was last offered at the strikethrough price on
05-03-2026

$ 25.59 USD
Free Shipping on orders $49 and up
Mounting bolts sold separately. Two required per ball joint.

Bavarian Autosport - Corporate Logo
T#:579821
Part#: 52501
Special Order: No Guaranteed ETA
Sale - Save 20% $ 19.99

This product was last offered at the strikethrough price on
05-03-2026

$ 15.99 USD
Free Shipping on orders $49 and up
Sale - Save 20%
$ 19.99

This product was last offered at the strikethrough price on
05-03-2026

$ 15.99 USD
Free Shipping on orders $49 and up
Bavarian Autosport - Corporate Logo
T#:578804
Part#: 010412
Special Order: No Guaranteed ETA
Sale - Save 3% $ 297.99

This product was last offered at the strikethrough price on
05-03-2026

$ 289.05 USD
Sale - Save 3%
$ 297.99

This product was last offered at the strikethrough price on
05-03-2026

$ 289.05 USD
Add chassis stiffness and style to your E34.
Bavarian Autosport - Corporate Logo
T#:579685
Part#: 50259
Special Order: No Guaranteed ETA
Sale - Save 20% $ 25.99

This product was last offered at the strikethrough price on
05-03-2026

$ 20.79 USD
Free Shipping on orders $49 and up
Sale - Save 20%
$ 25.99

This product was last offered at the strikethrough price on
05-03-2026

$ 20.79 USD
Free Shipping on orders $49 and up
Rear subframe bushings are a common failure point, creating a clunking condition and unwarranted subframe shifting under load. Replace your bad bushings with these new units from Bavarian Autosport.