BMW Suspension Parts

Rear Shock Mounts (RSM) - Lower + Upper - OEM Rubber - E82, E9X (not ...

T#:11953

Part#: E9X-REAR-MOUNTS

Ships in 3 Business Days

$ 96.73 USD

Add to Wish List

Qty

$ 96.73 USD

Add to Wish List

A 5-piece set of new OEM rear upper and lower shock mounts to complete your shock install or replace broken mounts (RSM). The top mounts on the shocks for the E82 1-series and E90/E91/E92/E93 3-series consist of 4 pieces -
A. rear upper-top shock mounts, 33506771737
B. rear upper-middle shock mounts, 33506767010
C. rear upper-bottom shock mounts, 33506771738
D. rear upper supporting cup, 33526764418 (sits over bumpstop)
In addition, there is a lower shock mount to locate the shock to the suspension (installs on spring arm), 33526768544.

That's a lot of rubber that takes constant deflecting and absorbing of cornering forces and impacts from bumps, potholes, etc. Replacing the RSMs is key to maintaining a quiet and comfortable ride. Price is for all 5 pieces.

This item fits the following BMWs:
2006-2011 E90 BMW 325i 325xi 328i 328xi 328i xDrive 330i 330xi 335d 335i 335xi 335i xDrive - Sedan
2006-2011 E91 BMW 325xi 328i 328xi 328i xDrive - Wagon
2007-2012 E92 BMW 328i 328xi 328i xDrive 335i 335is 335xi 335i xDrive - Coupe
2007-2012 E93 BMW 328i 335i - Convertible

Show More Show Less

OE Rear Upper Shock Mount Kit w/ Hardware - F3X F2X

T#:639047

Part#: 33506862725KT2

In Stock

Sale - Save 3% $ 168.99

This product was last offered at the strikethrough price on
05-03-2026

$ 163.15 USD

Add to Wish List

Qty

Sale - Save 3%

$ 168.99

This product was last offered at the strikethrough price on
05-03-2026

$ 163.15 USD

Add to Wish List

Strut mounts can begin to wear and fail over time, causing a knock in the suspension to occur. Replace yours with a OE Lemforder replacement to ensure a tight, noise-free ride. As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts. All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform! Genuine BMW Guide Support - This item fits the following BMW Chassis: F22,F30,F31,F32,F33,F36

Show More Show Less

Febi Upper Strut Mount - E24, E28, E30, E34

We Price Match - Give Us A Call or Chat!

T#:382541

Part#: 31331139452

In Stock

$ 33.99 USD

Add to Wish List

Qty

$ 33.99 USD

Add to Wish List

A common source of noise in the front suspension

IRP Adjustable Steel Rear Control Arm Pair - E36 E46 Z4

T#:401372

Part#: IRPCA-ST

In Stock

$ 233.99 USD

Add to Wish List

Qty

$ 233.99 USD

Add to Wish List

If you are looking for a wider range of camber adjustability in the rear of you car, the IRP Adjustable rear lower control arm is exactly what you need! Built to be much stronger than stock, these rear control arms feature inner monoball bushings and are built of steel, reducing the weight as well. These are perfect for a lowered car or for a track car that needs a greater level of rear adjustment.

Features:

Strong Steel Construction
Adjustable
Painted Yellow For Corrosion Protection
Weight Reduction
Monoball Inner Mount

This item fits the following BMWs:
1992-1999 E36 BMW 318i 318is 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
1999-2006 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi M3
2003-2008 E85 BMW Z4 2.5i Z4 3.0i Z4 3.0si Z4 M Roadster M Coupe

Show More Show Less

Febi Control Arm Bracket - Right - E30, E36, Z3

We Price Match - Give Us A Call or Chat!

T#:376585

Part#: 31121139790

In Stock

$ 33.43

This product was last offered at the strikethrough price on
04-16-2026

$ 30.49 USD

Add to Wish List

Qty

$ 30.49 USD

Add to Wish List

Does not include a bushing

Febi Control Arm Bracket - Left - E30, E36, Z3

We Price Match - Give Us A Call or Chat!

T#:376586

Part#: 31121139789

In Stock

$ 45.24

This product was last offered at the strikethrough price on
04-02-2026

$ 29.35 USD

Add to Wish List

Qty

$ 29.35 USD

Add to Wish List

Does not include a bushing

Rear Shock Mounts (RSM) - Upper - OEM Rubber - E82, E9X (non-M) (Pair...

T#:11986

Part#: E9X-URSM

In Stock

Sale - Save 2% $ 49.12

This product was last offered at the strikethrough price on
05-03-2026

$ 48.01 USD

Add to Wish List

Qty

Sale - Save 2%

$ 49.12

This product was last offered at the strikethrough price on
05-03-2026

$ 48.01 USD

Add to Wish List

A 4-piece set of new OEM rear upper and lower shock mounts to complete your shock install or replace broken mounts (RSM). The top mounts on the shocks for the E82 and E90/E91/E92/E93 consist of 4 pieces. These E9X URSM pieces fit all E82 and E9X except the M3 with EDC.

Rear Shock Mount (RSM) Kit consists of:
A. rear upper-top shock mounts, 33506771737
B. rear upper-middle shock mounts, 33506767010
C. rear upper-bottom shock mounts, 33506771738
D. rear upper supporting cup, 33526764418 (sits over bumpstop)
There is also a lower mount that is available separately. This package covers only the rear upper shock mounts.

That's a lot of rubber that takes constant deflecting and absorbing of cornering forces and impacts from bumps, potholes, etc. Replacing the RSMs is key to maintaining a quiet and comfortable ride. Price is for all 4 upper pieces for BOTH sides of the car.

This item fits the following BMWs:
2006-2011 E90 BMW 325i 325xi 328i 328xi 328i xDrive 330i 330xi 335d 335i 335xi 335i xDrive - Sedan
2006-2011 E91 BMW 325xi 328i 328xi 328i xDrive - Wagon
2007-2012 E92 BMW 328i 328xi 328i xDrive 335i 335is 335xi 335i xDrive - Coupe
2007-2012 E93 BMW 328i 335i - Convertible

Show More Show Less

Front Control Arm Refresh Kit - F22, F23, F30, F31, F32, F33, F36 ...

T#:42099866

Part#: 31126854727TKT

In Stock

Sale - Save 3% $ 481.99

This product was last offered at the strikethrough price on
05-03-2026

$ 467.50 USD

Add to Wish List

Qty

Sale - Save 3%

$ 481.99

This product was last offered at the strikethrough price on
05-03-2026

$ 467.50 USD

Add to Wish List

Give your BMW the sharp handling it was engineered for with the Front Control Arm Refresh Kit, the perfect solution for a complete front suspension overhaul.

Front Suspension Refresh Kit - F2X, F3X

T#:711928

Part#: 31126852991KT2

Ships in 1-2 days

$ 553.99

This product was last offered at the strikethrough price on
04-06-2026

$ 490.99 USD

Add to Wish List

Qty

$ 490.99 USD

Add to Wish List

Eliminate the most common sources of suspension slop with our all new Turner Suspension Refresh Kits that feature only OEM parts! We do not include any "cheap parts" in our refresh kits to ensure long-lasting reliability and noise-free suspension.

Show More Show Less

Febi Upper Strut Mount - E36, Z3, Z4

We Price Match - Give Us A Call or Chat!

T#:382546

Part#: 31336779613

In Stock

$ 37.99

This product was last offered at the strikethrough price on
04-20-2026

$ 31.99 USD

Add to Wish List

Qty

$ 31.99 USD

Add to Wish List

Should be replaced each time shocks are replaced due to this being a wearing item - made in Germany!

IRP Performance Rear Polyurethane Shock Mount Kit - E30 E36 E46 Z3 Z4...

T#:401369

Part#: IRPRTM-P

In Stock

$ 110.00 USD

Add to Wish List

Qty

$ 110.00 USD

Add to Wish List

Looking to stiffen up your rear shock mount without going for a solid rear mount? The Polyurethane Rear Performance Strut Mount from IRP will give you the stiffer reinforcement without giving you the typical noise, vibration, and harshness that come with traditional performance strut mounts. The polyurethane also helps with preventing rear shock blowouts, a common problem for stock BMW rear mounts that are paired with stiffer than stock suspension.

The bearing sleeve and poly bushing are built to work with all stock style shocks such as Bilstein and H&R coilover and suspension kits.

Fits the following BMW chassis:
E36 BMW All Submodels except for 318ti
E46 BMW All Submodels
E30 BMW All Submodels
E36 Z3 BMW All Submodels
E85/E86 Z4 BMW All Submodels

Show More Show Less

BMW Strut Mounting

We Price Match - Give Us A Call or Chat!

T#:5677345

Part#: 31306851879

Ships in 1 Business Day

$ 71.99

This product was last offered at the strikethrough price on
05-07-2026

$ 61.99 USD

Add to Wish List

Qty

$ 61.99 USD

Add to Wish List

Meyle Upper Strut Mount - E36, Z3, Z4

We Price Match - Give Us A Call or Chat!

T#:375473

Part#: 31336779613

In Stock

$ 31.99 USD

Add to Wish List

Qty

$ 31.99 USD

Add to Wish List

Should be replaced each time shocks are replaced due to this being a wearing item

IRP Rear Shock Mount Upper Reinforcement Plates

T#:5282924

Part#: IRPRSMP-30

In Stock

$ 27.99 USD

Add to Wish List

Qty

$ 27.99 USD

Add to Wish List

IRP (Individual Race Parts) is a performance aftermarket parts company that focuses on high quality and long term reliability. Rear shock mount reinforcement plates by IRP that fit a large number of E chassis 3 series cars between E30, E36, E46 and also the Z3 and Z4.

Show More Show Less

Febi Front Upper Strut Mount - F22, F23, F30, F31, F32, F33, F34, F36...

We Price Match - Give Us A Call or Chat!

T#:639975

Part#: 31306880438

In Stock

$ 93.99 USD

Add to Wish List

Qty

$ 93.99 USD

Add to Wish List

Febi Trailing Arm Ball Joint - Priced Each - E36, Z1 Roadster ...

We Price Match - Give Us A Call or Chat!

T#:374708

Part#: 33326775551

In Stock at Vendor

$ 27.42 USD

Add to Wish List

Qty

$ 27.42 USD

Add to Wish List

Ideal for replacing worn or damaged components, the Febi Trailing Arm Ball Joint is an essential part for maintaining your vehicle's suspension system.

Front Differential Bushing - Priced Each

We Price Match - Give Us A Call or Chat!

T#:362591

Part#: 33171090389

In Stock

$ 28.99

This product was last offered at the strikethrough price on
05-07-2026

$ 23.99 USD

Add to Wish List

Qty

$ 23.99 USD

Add to Wish List

Mubea Coil Spring - Front - E46, E90, E91, E92

T#:1196080

Part#: 31336769916

In Stock

$ 81.99 USD

Add to Wish List

Qty

$ 81.99 USD

Add to Wish List

Replace your broken or worn out spring and restore your ride quality with this aftermarket option!

OEM Febi Bump Stop - F10 5 Series

We Price Match - Give Us A Call or Chat!

T#:38419109

Part#: 33536789385

In Stock

$ 20.99 USD

Add to Wish List

Qty

$ 20.99 USD

Add to Wish List

Protect your suspension system and shock absorbers with this premium replacement bump stop. Designed to prevent bottoming out, this essential rubber component safeguards your shocks from damage that could lead to costly repairs. Over time, the original rubber construction can become damaged or go missing, compromising suspension performance. Replace your worn or missing bump stop to maintain optimal suspension operation and prevent unnecessary wear. Note: One bump stop is required per shock absorber. For best results, replacement in pairs is recommended.

Show More Show Less

1-series Strut/Shock Mount Kit - E82 128i, 135i

T#:11958

Part#: E82MOUNTKIT

Ships in 3 Business Days

Sale - Save 2% $ 167.99

This product was last offered at the strikethrough price on
04-16-2026

$ 165.15 USD

Add to Wish List

Qty

Sale - Save 2%

$ 167.99

This product was last offered at the strikethrough price on
04-16-2026

$ 165.15 USD

Add to Wish List

Replacing your struts and shocks? Don't forget the bushings! The rubber mounts for the shocks will go bad over time, especially if you drive hard or the roads are particularly rough. The shock mounts locate the front struts and rear shocks to the car - providing a quiet and vibration-free buffer between the road and the cabin. Shock mounts and bushings can wear out just like any other rubber part on the car. This leads to more noise and harshness reaching the chassis and may complicate your new suspension install. When installing new shocks, that is the perfect time to also replace the mounts. There is no additional time to install them, no special tools required, and doesn't take any extra time! If you re-use the original mounts you have the risk of them failing before your next shock replacement, doubling your labor costs.

Included in the E82 1-series Mount Kit:

front upper strut mounts (also known as a guide support), 31306775098

A. rear upper-top shock mounts, 33506771737

B. rear upper-middle shock mounts, 33506767010

C. rear upper-bottom shock mounts, 33506771738

D. rear upper supporting cup, 33526764418 (sits over bumpstop)

rear lower shock mount (installs on spring arm), 33526768544
Buy as a package and save $!!

This item fits the following BMWs:
2008-2012 E82 BMW 128i 135i - Coupe
2008-2012 E88 BMW 128i 135i - Convertible

Show More Show Less

OEM Rear Shock Mounts (RSM) - Upper - OEM Rubber - E82 1M, E9X M3 (no...

T#:11954

Part#: TMS11954

In Stock

Sale - Save 2% $ 49.12

This product was last offered at the strikethrough price on
05-03-2026

$ 48.01 USD

Add to Wish List

Qty

Sale - Save 2%

$ 49.12

This product was last offered at the strikethrough price on
05-03-2026

$ 48.01 USD

Add to Wish List

A 4-piece set of new OEM rear upper and lower shock mounts to complete your shock install or replace broken mounts (RSM). The top mounts on the shocks for the E82 1M and E90/E92/E93 M3 consist of 4 pieces. These are the mounts to fit a non-EDC suspension.

Rear Shock Mount (RSM) Kit consists of:
A. rear upper-top shock mounts, 33506771737
B. rear upper-middle shock mounts, 33506767010
C. rear upper-bottom shock mounts, 33506771738
D. rear upper supporting cup, 33526764418 (sits over bumpstop)
The lower mount on the 1M/M3 is integrated on the shock absorber.

That's a lot of rubber that takes constant deflecting and absorbing of cornering forces and impacts from bumps, potholes, etc. Replacing the RSMs is key to maintaining a quiet and comfortable ride. Price is for all 4 upper pieces.

This item fits the following BMWs:
2011-2012 E82 BMW 1M
2008-2011 E90 BMW M3 - Sedan
2008-2012 E92 BMW M3 - Coupe
2008-2012 E93 BMW M3 - Convertible

Show More Show Less

Febi Rear Shock Mount - E39

We Price Match - Give Us A Call or Chat!

T#:382113

Part#: 33521093416

Ships in 1 Business Day

$ 55.99

This product was last offered at the strikethrough price on
04-22-2026

$ 47.99 USD

Add to Wish List

Qty

$ 47.99 USD

Add to Wish List

To be replaced when servicing rear shocks

Shocks and spring Installation Kit - 3 Bolt Top Mount - F22/3 F30/2/3...

T#:553619

Part#: 31306863135KT2

In Stock

$ 611.99

This product was last offered at the strikethrough price on
03-11-2026

$ 564.99 USD

Add to Wish List

Qty

$ 564.99 USD

Add to Wish List

This kit is contains all new strut and shock mounts and hardware needed when installing a new shocks and struts or aftermarket suspension on your vehicle.

Fits the following BMW's

F22/23 228i 228i xDrive M235i M235i xDrive without EDC and production date up 03/2015

F30 320i 320i xDrive 328d 328d xDrive 328i 328i xDrive 335i 335i xDrive without EDC and production date up 03/2015

F32/33/36 428i 428i xDrive 435i 435i xDrive

Show More Show Less

IRP Rear Lower Shock Mount Set - E8X E9X Non-M

T#:587022

Part#: IRPRSM-90B

In Stock

$ 195.00 USD

Add to Wish List

Qty

$ 195.00 USD

Add to Wish List

The stock rubber lower shock mounts tend to fail prematurely, especially when subjected to rough track conditions. These IRP lower shock mounts utilize a monoball design that is significantly stronger and helps to eliminate deflection that is caused by soft rubber. Key Benefits: Monoball rear lower shock mount eliminates unwanted deflection, maximizing shock efficiency and performance. Allows full shock body articulation for low friction movement and reduced side loading and improved shock wear. Designed to work with stock non-M taper seat stud style shocks (not M eyelet mount type). Maintains OE shock position

Show More Show Less

E46Xi FRONT CONTROL ARM BRACKET KIT WITH E46 325Xi/330Xi FRONT CONTRO...

T#:401618

Part#: TSU4695PBX/16KT

In Stock

Sale - Save 19% $ 230.99

This product was last offered at the strikethrough price on
05-03-2026

$ 187.99 USD

Add to Wish List

Qty

Sale - Save 19%

$ 230.99

This product was last offered at the strikethrough price on
05-03-2026

$ 187.99 USD

Add to Wish List

For all 2001 to 2005 325xi and 330xi. For convenience, we have assembled this bushing carrier bracket kit, to save you time when changing our control arm bushings. It includes two bushing carriers with pre-installed bushings (one left, one right) and mounting bolts.

These bushing brackets fit all 2001, 2002, 2003, 2004, and 2005 model BMW 325xi and 330xi.

Show More Show Less

Front Upper Strut Mount - E39 540i M5 and Z8

We Price Match - Give Us A Call or Chat!

T#:2148

Part#: 31331091708

In Stock

$ 62.99 USD

Add to Wish List

Qty

$ 62.99 USD

Add to Wish List

Upper shock mounts and bearings are good to replace while replacing front shocks. It is easier and often less expensive to replace them preventatively than to have them fail shortly afterward and have to take apart the whole suspension a second time. This front shock tower bearing fits BMW E39 540i M5 and Z8.

It's also a good idea to replace the upper spring plate and bearing at the same time. Often, these bearings are worn out and should not be put back in the car. See below for the link to add these to order too.

This item fits the following BMWs:
1997-2003 E39 BMW 540i M5
1997-2003 E39 BMW 528i 530i - only for cars with EDC - electronic damping control

E52 BMW Z8 Z8 Alpina

Show More Show Less

Febi Rear Lower Control Arm Bushing - Rear Position - F22, F23, F30, ...

We Price Match - Give Us A Call or Chat!

T#:382082

Part#: 33326792551

In Stock

$ 30.99 USD

Add to Wish List

Qty

$ 30.99 USD

Add to Wish List

Fits the left and right side

E30 Complete Front & Rear Suspension Rebuild Kit

T#:21735879

Part#: E30SUPRBM1042KT

Ships in 4 Business Days

Sale - Save 8% $ 1,011.00

This product was last offered at the strikethrough price on
07-07-2026

$ 927.88 USD

Add to Wish List

Qty

Sale - Save 8%

$ 1,011.00

This product was last offered at the strikethrough price on
07-07-2026

$ 927.88 USD

Add to Wish List

Experience a new level of comfort and control with our Level 3 Comprehensive Suspension Service for your beloved E30 BMW. Say goodbye to clunks, squeaks, and wandering issues plaguing your vehicle's front and rear ends. We provide an all-in-one solution to address these problems, offering superior performance and durability, ensuring your E30 drives better than ever before. Front-End Upgrades: Lemforder Front Lower Control Arms: Replace worn-out control arms with Lemforder precision-engineered components for enhanced stability and handling. Solid Rubber E36 M3 Front Control Arm Bushings: Improve steering feel and responsiveness with these solid rubber bushings, guaranteeing a more connected driving experience. Lemforder Front Sway Bar End Links: Upgrade your sway bar end links to Lemforder for enhanced durability and reduced play, further enhancing your E30's handling. Sachs Front Strut Mounts: Ensure smooth and controlled ride quality with Sachs front strut mounts, providing improved shock absorption and longevity. Lemforder Inner and Outer Tie Rod Assemblies: Replace your tie rod assemblies with Lemforder precision for precise steering and handling. All Required Retaining Hardware: We include all the necessary hardware to ensure a seamless installation, saving you time and hassle. Rear-End Enhancements: Rear Trailing Arm Bushings: Upgrade your rear trailing arm bushings for improved stability and handling characteristics. Rear Stabilizer Links: Replace worn stabilizer links for better control and reduced body roll during cornering. Upgraded Rear Shock Mounts from the E46 M3: Experience improved ride comfort and handling with upgraded rear shock mounts from the E46 M3. ECS Rear Shock Mount Reinforcement Plates: Ensure the longevity and reliability of your shock mounts with ECS reinforcement plates, protecting against deformation. Rear Shock Mount Hardware and Gasket: We provide all necessary hardware and gaskets to complete the installation seamlessly. Rear Subframe Mounts: Enhance rear-end stability and performance with upgraded rear subframe mounts. Differential Bushing: Improve power delivery and drivetrain response with a new differential bushing.

Show More Show Less

Coilover Installation Hardware - (3/5/6-Bolt M8)

T#:14684339

Part#: 07119905032TKT

In Stock

$ 119.99 USD

Add to Wish List

Qty

$ 119.99 USD

Add to Wish List

All the hardware you need to remove and replace your front and rear suspension with new coilovers.

This Kit includes the following items:

FRONT

Front strut pinch bolts - QTY 2
Front strut pinch bolt nuts - QTY 2
Control arm ball-joint nuts - QTY 4
REAR

Lower shock mounting bolts - QTY 2
Lower shock locking nuts - QTY 2
Upper shock mounting bolts - QTY 6
Shock mounts - QTY 2
Shock pads - QTY 2

Show More Show Less

Lower Front Control Arm Kit - Featuring Turner Motorsport Bushings ...

T#:5416780

Part#: 31126777851TMSKT

Ships on Sep 1, 2026

$ 591.99

This product was last offered at the strikethrough price on
05-13-2026

$ 535.99 USD

Add to Wish List

Qty

$ 535.99 USD

Add to Wish List

The front control arms on your E46 will fail at some time or another, since this part is the core of the front ends handling a refresh can greatly improve your driving experience. The question is, why settle for a standard soft bushing replacement? When you install this refresh kit you're adding in Turner Motorsport performance poly FCAB's adding enough stiffness to hold tight in the corners yet just soft enough to add almost zero NVH. Kit contents: Left & Right Meyle HD control arms with pressed in ball joints Turner 80a poly control arm bushings - pre-installed into the brackets All the necessary mounting hardware

Show More Show Less

Suspension Reinforcement Kit E36

T#:15777304

Part#: 002478ECS01-KT

In Stock

$ 122.99 USD

Add to Wish List

Qty

$ 122.99 USD

Add to Wish List

If you already upgraded your suspension but are looking for the finishing touch, this kit is what you need. The BMW front strut mount reinforcement plates reduce the risk of the shock tower mushrooming and cracking. The ECS rear shock mount reinforcement plates reduce the risk of the rear shock mount area tearing and deforming. The ECS Delrin rear trailing arm bushing limiters reduce the movement that the RTAB's can make resulting in a tighter rear suspension and with less moment prolongs the bushing life.

Show More Show Less

E9X M3 Front Control Arm Upgrade Kit w/ Installation Hardware ...

T#:30430683

Part#: 37142283867EKT2

In Stock

Sale - Save 14% $ 491.99

This product was last offered at the strikethrough price on
04-28-2026

$ 422.75 USD

Add to Wish List

Qty

Sale - Save 14%

$ 491.99

This product was last offered at the strikethrough price on
04-28-2026

$ 422.75 USD

Add to Wish List

Enhance your BMW's performance with our premium control arm upgrade kit from Turner Motorsport! This kit provides a significant handling upgrade without sacrificing ride quality. Perfect for enthusiasts looking to replace their factory control arms with sturdier, high-performance alternatives, this kit features stiffer bushings and ball joints for improved precision.

Key Benefits:

Improved Handling: Experience more precise and responsive steering, giving your BMW a sportier feel. Increased Durability: Our control arms are much sturdier than factory units, ensuring long-lasting performance. Negative Camber Adjustment: Adds approximately 0.75 degrees of negative camber to the front, enhancing cornering grip and stability. Complete Kit: Includes all four M3-specific lower control arms with mounting hardware. M3 Headlight Leveling Rod: Necessary for proper installation, ensuring your headlights are correctly aligned. Important Note for Z4 Models: For Z4 owners, please be aware that the M3 headlight level sensor rod is positioned differently. A custom solution will be required to attach the sensor rod to the control arm. Currently, we do not offer a direct solution for this issue.

Upgrade your BMW's suspension with confidence! Enjoy a smoother, more controlled ride with our premium control arm upgrade kit!

Show More Show Less

M3/1M Front And Rear Control Arm Upgrade Kit

T#:5389743

Part#: 37142283867TMSKT

Ships in 1-2 days

Sale - Save 15% $ 1,317.99

This product was last offered at the strikethrough price on
03-17-2026

$ 1,124.84 USD

Add to Wish List

Qty

Sale - Save 15%

$ 1,317.99

This product was last offered at the strikethrough price on
03-17-2026

$ 1,124.84 USD

Add to Wish List

Wanting more out of your BMW without having horrid ride quality? This is not only an extremely common handling upgrade, but one of the best upgrades you can do. These control arms are much sturdier than your factory units and feature much stiffer bushings and ball joints. Not only does this kit give you an extremely effective upgrade, it's the perfect excuse to get rid of your factory arms that are at the edge of being road worthy.

Show More Show Less

Febi Rear Upper Strut Mount - E34

We Price Match - Give Us A Call or Chat!

T#:382116

Part#: 33521132270

Ships in 1 Business Day

$ 26.99

This product was last offered at the strikethrough price on
05-07-2026

$ 22.99 USD

Add to Wish List

Qty

$ 22.99 USD

Add to Wish List

Recommend replacing when installing new struts

Front Sway Bar Link for E39 M5 and 540i

We Price Match - Give Us A Call or Chat!

T#:5238

Part#: 31351095664

Ships in 3 Business Days

$ 34.99 USD

Add to Wish List

Qty

$ 34.99 USD

Add to Wish List

The front sway bar links are known to fail on the E39 5 Series V8 models (540i and M5). Early sway bar link failures produce clunking noises and vibration, while more serious failure will leave the front sway bar disconnected and cause serious handling issues. This is a replacement sway bar end link for the 1997-2003 BMW 540i and 2000-2003 BMW M5 (all V8 models).

This swaybar link fits the following BMW:
1997-2003 E39 540i sedan / wagon
2000-2003 E39 M5 sedan

Show More Show Less

Febi Rear Bump Stop - Set of 2 - E82, E88, E90, E92

We Price Match - Give Us A Call or Chat!

T#:382616

Part#: 33536767334

Ships on Aug 31, 2026

$ 22.99 USD

Add to Wish List

Qty

$ 22.99 USD

Add to Wish List

Covers the rear shock. Made in Germany! Sold as a Pair.

DTM Style Rear Trailing Arm Bushing Kit - w/ Fluro Motorsport Bearing...

T#:39025510

Part#: IRPDTM-30B

In Stock

$ 542.99 USD

Add to Wish List

Qty

$ 542.99 USD

Add to Wish List

Upgrade your rear trailing arms with this DTM-style adjustment kit from IRP. This kit replaces the stock bushing side of the rear trailing arm - requires cutting of the rear trailing arm and welding of the new bushings in place. Professional installation is highly recommended.

Show More Show Less

Rear Upper And Lower Shock Mount Kit

T#:5498488

Part#: 33506767010KT

Ships in 3 Business Days

$ 145.03 USD

Add to Wish List

Qty

$ 145.03 USD

Add to Wish List

Includes all the necessary mounts to install new shocks on the rear of your BMW The following parts are included. Rear Lower Shock Mount (X2) Rear Upper Shock Mount - Upper Section (x2) Rear Upper Shock Mount - Lower Section (x2) Supporting Cup (x2) Sealing grommet (x2) All need bolts and nuts

Show More Show Less

Strut Mount & Bearing Replacement Kit - F3X

T#:855009

Part#: 31306881929KT2

In Stock

$ 336.99

This product was last offered at the strikethrough price on
03-11-2026

$ 269.99 USD

Add to Wish List

Qty

$ 269.99 USD

Add to Wish List

Replace your worn or clunking strut mounts with this kit that has all the necessities to get the job done. Kit includes strut mounts and hardware.

Febi Compression Absorber - E90, E91, E92

We Price Match - Give Us A Call or Chat!

T#:579651

Part#: 45315

In Stock

$ 33.99 USD

Add to Wish List

Qty

$ 33.99 USD

Add to Wish List

For the front suspension.

Mini F56 Strut Mount Guide Support - Priced Each

We Price Match - Give Us A Call or Chat!

T#:592444

Part#: 31306884184

In Stock

$ 138.99

This product was last offered at the strikethrough price on
05-13-2026

$ 102.99 USD

Add to Wish List

Qty

$ 102.99 USD

Add to Wish List

Termed as a guide mount or front strut support, this vital component might be the source of those troublesome suspension noises such as squeaks or clunks as it wears over time. Serving for both passenger and driver sides, this mount attaches to the top of the strut, revealing the end thread when the spring and strut are compressed and locked. Professional installation is recommended. Compatible with EDC/DDC (Electronic Dampening Control) systems. FEBI, renowned as an OEM supplier, guarantees quality and compatibility.

Benefits:

Reduces suspension noise (squeaks, clunks)
Compatible with both passenger and driver sides
Works with EDC/DDC systems
Provided by FEBI, an OEM supplier

Show More Show Less

Front Upper Strut Mount - E38 740i/il 750i/il

We Price Match - Give Us A Call or Chat!

T#:7741

Part#: 31331090611

Ships in 6 Business Days

$ 28.99

This product was last offered at the strikethrough price on
05-07-2026

$ 24.99 USD

Add to Wish List

Qty

$ 24.99 USD

Add to Wish List

Upper shock mounts and bearings are good to replace while replacing front shocks. It is easier and often less expensive to replace them preventatively than to have them fail shortly afterward and have to take apart the whole suspension a second time. This shock tower bearing fits E38 7 series.

It's also a good idea to replace the upper spring plate and bearing at the same time. Often, these bearings are worn out and should not be put back in the car. See below for the link to add these to order too.

Sold individually

This item fits the following BMWs:
1995-2001 E38 BMW 740i 740il 750il

Show More Show Less

IRP Adjustable Camber/Caster Plates - E36 BMW

T#:401378

Part#: IRPE36ACCP-1

In Stock

$ 288.99 USD

Add to Wish List

Qty

$ 288.99 USD

Add to Wish List

**For vehicles with coilover front suspension**

When looking to dial in your steering geometry and alignment for reduced tire where and/or better track handling, the stock suspension is quite limited. To fix this, you can install Camber/Caster plates such as these plates from IRP. Camber/Caster plates allow for adjustment of the top position of the shock's mounting position. These slight adjustments have a huge impact on the stance of the of the wheel when driving straight down the road and when turning into a corner. With simple adjustments, you can increase the grip of the tires in hard turns, improve tread life, or even just make an alignment correction for a vehicle with a lowered ride height.

The IRP Camber Caster plates are made of an aircraft grade aluminum body, for strength and low weight, with an adjustable mounting plate that utilizes a steel monoball mounting point. This makes the plate resistant to corrosion and prevents deformation even with the stiffest shocks and springs.

Features:

Decreased understeer
Decreases outside edge tire wear
Aircraft Grade Aluminum Construction
Steel Monoball and Mounting Sleeves

Fits the following BMWs:
1991-1999 E36 BMW

Show More Show Less

Shocks and spring Installation Kit - E82 E88 E90 E92 E93 Non M ...

T#:553668

Part#: 31306775098KT2

Ships in 3 Business Days

$ 354.22 USD

Add to Wish List

Qty

$ 354.22 USD

Add to Wish List

This kit is contains all new strut and shock mounts and hardware needed when installing a new shocks and struts or aftermarket suspension on your vehicle.

Fits the following BMW's

E82/88 128i 135i

E90/92/93 325i 328i 330i 335i 335is

Show More Show Less

IRP Adjustable Camber/Caster Plates - E36 BMW

T#:401379

Part#: IRPE36ACCP-2

In Stock

$ 295.99 USD

Add to Wish List

Qty

$ 295.99 USD

Add to Wish List

**For vehicles with stock style springs**

When looking to dial in your steering geometry and alignment for reduced tire where and/or better track handling, the stock suspension is quite limited. To fix this, you can install Camber/Caster plates such as these plates from IRP. Camber/Caster plates allow for adjustment of the top position of the shock's mounting position. These slight adjustments have a huge impact on the stance of the of the wheel when driving straight down the road and when turning into a corner. With simple adjustments, you can increase the grip of the tires in hard turns, improve tread life, or even just make an alignment correction for a vehicle with a lowered ride height.

The IRP Camber Caster plates are made of an aircraft grade aluminum body, for strength and low weight, with an adjustable mounting plate that utilizes a steel monoball mounting point. This makes the plate resistant to corrosion and prevents deformation even with the stiffest shocks and springs.

Features: