Find Parts That Fit Your Vehicle

BMW Suspension Parts

Your BMW's handling is determined by the capabilities and age of your suspension components. Our selected aftermarket performance suspension like coilovers, lowering springs, cup kits, and dampers can improve the handling of your BMW dramatically. With those upgrades comes the needs for proper adjustment; our recommended supporting modifications comes stiffer sway bars, bushings, and adjustable camber/caster plates, to name a few found on this page. Completely build your suspension for the most competitive BMW driving experience, achieve your perfect look, or simply replace your worn suspension with our recommended parts.

Sub-Categories

Sort By:

Macht Schnell - Corporate Logo
T#:5351
Part#: TMS5351
Ships on Sep 2, 2026
$ 249.99

This product was last offered at the strikethrough price on
05-29-2026

$ 249.00 USD
Free Shipping
$ 249.00 USD
Free Shipping
For those wanting to move away from EDC for aftermarket suspension systems or coilover setups, the EDC monitoring can be a bit obtrusive as this type of monitoring is no longer required – resulting in numerous error messages thinking the system has malfunctioned. This EDC Emulation Module installs in less than 15 minutes and will fully emulate a fully active EDC environment when activated. Module can be activated/deactivated by via the integrated mini USB port within the module housing.

The Macht Schnell EDC Emulation Module is possible of the following features:
  • The ability to run aftermarket racing suspension/coilover setups in which EDC monitoring is not required
  • Compatible with iDrive and non-iDrive systems
  • Easy 15-minute installation process with no wire cutting
  • Proper emulation of the EDC monitoring system
  • No dealer visits or coding required after installation
  • Completely removable at any time

    Note: The Macht Schnell EDC Emulation Module will disable the EDC monitoring system supplied by BMW. Once disabled the behavior of the car will change and the driver will need to adjust his/her skill and technique. For this reason, this module is not intended for street vehicles and its use may result in injury or even death if proper conditions and procedures are not followed.
    Will not work on vehicles equiped with BMW's Dynamic Drive system.

    This item fits the following BMWs:
    2008-2011 E90 BMW M3 Sedan
    2008-2013 E92 BMW M3 Coupe
    2008-2013 E93 BMW M3 Convertible
    2006-2010 E60 BMW M5
    2006-2011 E63 BMW M6
    2007-2013 E70 BMW X5 3.0si X5 4.8i X5 xDrive30i X5 xDrive35d X5 xDrive35i X5 xDrive48i
    2008+ E71 BMW X6 xDrive35i X6 xDrive50i
  • Show More Show Less
    Burger Motorsports - Corporate Logo
    T#:637424
    Part#: BMSG20BSCB-BLK
    Ships in 7 Business Days
    $ 199.00 USD
    Free Shipping
    $ 199.00 USD
    Free Shipping
    Constructed from lightweight billet aluminum with the BMS logo engraved on the top middle. These strut braces are a solid one-piece design. These give an exclusive look under the hood and extra stabilization to the chassis.
    Show More Show Less

    Genuine BMW Motorsport - Corporate Logo
    T#:12076
    Part#: E9X-GPN-SUBFRAME
    In Stock
    $ 800.00 USD
    Free Shipping
    $ 800.00 USD
    Free Shipping
    The E82 and E90/E92 subframes have an inherent weakness in the rear subframe - the mounts are too soft for the power and torque these cars are capable of. The subframe is the heart of a BMW's rear suspension. As torque is transmitted through the differential and axles and as the tires grip the road, the subframe mounts are working to keeping everything in line. That's a tough task to hold when torque is increased with bigger boost (335i) or even mild tweaks (M3). While the M3 subframe mounts are a great upgrade for the non-M chassis these factory BMW Motorsport subframe mounts go one step further.

    These Motorsport/Group N rear subframe bushings are a direct replacement upgrade over the stock mounts. They are rubber to conform to the rules of the Group N racing class - so they are still acceptable for street use as long as extra ride harshness can be tolerated. The rear subframe has to come down from the car for these mounts to be pressed in. So now is the perfect time to do other work as well - check out our other Motorsport Race bushings or M3 upgrades.

    Price is for the set of 4 mounts.

    This item fits the following BMWs:
    2008-2012 E82 BMW 128i 135i 1M Coupe
    2006-2011 E90 BMW 325i 325xi 328i 328xi 328i xDrive 330i 330xi 335d 335i 335xi 335i xDrive M3 - Sedan
    2006-2012 E91 BMW 325xi 328i 328xi 328i xDrive - Wagon
    2007-2013 E92 BMW 328i 328xi 328i xDrive 335i 335is 335xi 335i xDrive M3 - Coupe
    2007-2013 E93 BMW 328i 335i M3 - Convertible
    Show More Show Less

    Alta Performance - Corporate Logo
    T#:754312
    Part#: AMPSUS100
    In Stock at Vendor
    $ 339.99 USD
    Free Shipping
    $ 339.99 USD
    Free Shipping

    ALTA Rear Control Arms are the ultimate upgrade for your MINI, replacing your rear lateral links with a solid and performance-focused design. These control arms enhance traction and handling while giving you precise control over camber and toe settings. The flexibility of ALTA control arms allows for fine-tuning without the hassle of removing and reinstalling the linkage. Simply adjust the lock nuts and twist the center section to achieve your desired settings.

    These control arms are the perfect complement to other suspension products like springs, coilovers, or sway bars.

    Key Features of ALTA Rear Control Arms:

    • CNC machined from 6061 aluminum rod for durability.
    • Heavy texture powder coating for corrosion resistance and added style.
    • Teflon-lined spherical rod ends for a solid connection and improved articulation.
    • Aircraft-quality spherical bearings for smooth and precise movement.
    • Injected Nylon around the ball center for quiet operation as the part ages.

    For a comprehensive rear end upgrade, consider purchasing two sets of control arms to replace both upper and lower control arms. This minimizes deflection from the OEM rubber bushings and reduces weight. Please note that on models with Xenon-style headlamps, some modifications to the leveling sensor mounting may be necessary. For additional details, consult your ALTA dealer or our Tech Department.

    ALTA Rear Control Arms come with high-quality hardware, including corrosion-resistant spacers and Grade 8 adjustment nuts.

    Show More Show Less
    Burger Motorsports - Corporate Logo
    T#:637423
    Part#: BMSG20BSCB-SIL
    Ships on Aug 31, 2026
    $ 255.99 USD
    Free Shipping
    $ 255.99 USD
    Free Shipping
    Constructed from lightweight billet aluminum with the BMS logo engraved on the top middle. These strut braces are a solid one-piece design. These give an exclusive look under the hood and extra stabilization to the chassis.
    Show More Show Less

    Rogue Engineering - Corporate Logo
    T#:553830
    Part#: RE.E9X.TA.M3
    Ships in 8 Business Days
    $ 289.00 USD
    Free Shipping
    $ 289.00 USD
    Free Shipping

    When an E9X is lowered beyond the limits of just lowering springs, the rear wheels toe-in excessively. This excessive rear toe leads to premature wear, that many people attribute to an increase in negative camber. It has become a common belief that an extremely low vehicle will wear the tires wrong as a matter of consequence. It has become standard practice to go as low as you can and proceed to replace your tires every five to ten thousand miles. Whats more is that when the vehicle reaches a certain ride height, the factory arms become maxed out and there is no way to compensate and dial in the proper toe. You're left with an improperly aligned vehicle that is in effect worse off than it was with the stock suspension installed.

    This is not only uneconomical but improper and unsafe. ECS Tuning is proud to offer a solution for this problem in the form of Rogue Engineering E9X adjustable rear toe arms. These arms allow for greater toe adjustment on vehicles that have been lowered with a coilover suspension. With the toe set properly the tires can contact the road properly this maximizes grip and minimizes wear. 

    Features:

    • 100% machined and anodized, 6061-T6 lightweight aluminum arms
    • High-strength, 3-piece, rod end (with carbon fiber reinforced, PTFE race) offers longer life for street compared to standard rod ends
    • SEALS-IT Rod end seals keep dirt, water, and other contaminants out
    • Rod ends feature grease fittings, to allow for rod end serviceability.
    • Lighter than stock!  (Stock is 875g, RE arms are 640g)
    • Extremely easy installation and adjustment (your alignment shop will LOVE you!)
    Show More Show Less
    Vargas Turbo Technologies - Corporate Logo
    T#:4662411
    Part#: VTT-G2X-STRBLK
    Ships in 10 Business Days
    $ 283.99 USD
    Free Shipping
    $ 283.99 USD
    Free Shipping
    Vargas has redesigned their line of G8x strut bars for the G2x platform. Featuring a set of carbon fiber strut bars with ends CNC machined from 6061-T6 aluminum and anodized in Black. These fit all 2019+ G2X vehicles regardless of the engine Includes: 2 M10 Flange bolts 2 M8 Flange bolts, and nuts *Note: 2021 models can choose to reuse factory hardware, strut bars may NOT work with all intakes.
    Show More Show Less

    Vargas Turbo Technologies - Corporate Logo
    T#:4662413
    Part#: VTT-G2X-STRBLU
    Ships in 4 Business Days
    $ 283.99 USD
    Free Shipping
    $ 283.99 USD
    Free Shipping
    Vargas has redesigned their line of G8x strut bars for the G2x platform. Featuring a set of carbon fiber strut bars with ends CNC machined from 6061-T6 aluminum and anodized in Blue. These fit all 2019+ G2X vehicles regardless of the engine Includes: 2 M10 Flange bolts 2 M8 Flange bolts, and nuts *Note: 2021 models can choose to reuse factory hardware, strut bars may NOT work with all intakes.
    Show More Show Less

    Genuine BMW Motorsport - Corporate Logo
    T#:2309
    Part#: E9X-GPN-UCAB
    Ships in 8 Business Days
    $ 413.38 USD
    Free Shipping
    $ 413.38 USD
    Free Shipping
    These are the factory BMW Motorsport Group N high performance front upper control arm bushings. These heavy duty rubber bushings are stiffer than the stock bushings to improve steering feel and improve handling. They are great for track use - and Grand Am Cup legal! - yet can also be used on a street driven car - please note these will not be as compliant as the stock rubber bushings. These are for the control arm with the ball joint pointing down, sometimes referred to as the thrust arm or tension strut.

    Price is for the pair of bushings.

    This item fits the following BMWs:
    2008-2012 E82 BMW 128i 135i 1M
    2006-2011 E90 BMW 325i 328i 330i 335d 335i M3 - Sedan
    2006-2011 E91 BMW 328i - Wagon
    2007-2012 E92 BMW 328i 335i 335is M3 - Coupe
    2007-2012 E93 BMW 328i 335i M3 - Convertible
    Show More Show Less
    Macht Schnell - Corporate Logo
    T#:4648679
    Part#: 69.10.100
    In Stock
    $ 289.00

    This product was last offered at the strikethrough price on
    08-10-2026

    $ 271.99 USD
    Limited Qty Sale
    Free Shipping
    $ 289.00

    This product was last offered at the strikethrough price on
    08-10-2026

    $ 271.99 USD
    Limited Qty Sale
    Free Shipping
    Macht Schnell's aluminum bushing kit will breathe new life into aging 1M's and M3's, affixing the car's rear subframe and differential to the chassis. Rubber subframe bushings in the E9x M3 and E82 1M from the factory are soft, and yield under hard driving resulting in ever-changing suspension geometry and alignment specs. By limiting the movement of both the car's subframe and differential, these solid bushings will give the rear of the car a tremendously planted and confident feel.
    Show More Show Less
    Rogue Engineering - Corporate Logo
    T#:553834
    Part#: RE.E9X.TA
    Back Ordered
    $ 339.00 USD
    Free Shipping
    $ 339.00 USD
    Free Shipping

    Updated design!  Now shipping!

    When an E9X is lowered beyond the limits of just lowering springs, the rear wheels toe-in excessively. This excessive rear toe leads to premature wear, that many people attribute to an increase in negative camber. It has become a common belief that an extremely low vehicle will wear the tires wrong as a matter of consequence. It has become standard practice to go as low as you can and proceed to replace your tires every five to ten thousand miles. Whats more is that when the vehicle reaches a certain ride height, the factory arms become maxed out and there is no way to compensate and dial in the proper toe. You're left with an improperly aligned vehicle that is in effect worse off than it was with the stock suspension installed.

    This is not only uneconomical but improper and unsafe. ECS Tuning is proud to offer a solution for this problem in the form of Rogue Engineering E9X adjustable rear toe arms. These arms allow for greater toe adjustment on vehicles that have been lowered with a coilover suspension. With the toe set properly the tires can contact the road properly this maximizes grip and minimizes wear. 

    Features:

    100% machined and anodized, 6061-T6 lightweight aluminum arms (and collars).

    Stainless hardware and spacers are perfect for the tough Northeast climate!

    New!  Easy adjustment with 22mm open ended wrench and 5mm allen key!  It only requires 15 ft. lbs. on the clamp to secure the clamp!

    New!  Included lock-out kit, replaces factory eccentric hardware.

    Updated 3-piece rod ends features 4130 chromoly steel bodies, heat-treated, alloy steel races, and Teflon liners

    Extremely easy installation and adjustment (your alignment shop will LOVE you!)

    Show More Show Less


    Sneed4Speed - Corporate Logo
    T#:6795779
    Part#: 2128222B
    Special Order: No Guaranteed ETA
    $ 275.00 USD
    Free Shipping
    $ 275.00 USD
    Free Shipping
    Vargas Turbo Technologies - Corporate Logo
    T#:4662392
    Part#: VTT-G2X-STRTI
    In Stock
    $ 335.99 USD
    Free Shipping
    $ 335.99 USD
    Free Shipping
    Vargas has redesigned their line of G8x strut bars for the G2x platform. Featuring a set of carbon fiber strut bars with ends CNC machined from T2 Titanium and anodized in genuine T2 Titanium with a rainbow finish. These fit all 2019+ G2X vehicles regardless of the engine Includes: 2 M10 Flange bolts 2 M8 Flange bolts, and nuts *Note: 2021 models can choose to reuse factory hardware, strut bars may NOT work with all intakes.
    Show More Show Less
    Rogue Engineering - Corporate Logo
    T#:26438195
    Part#: RE.345
    Ships in 3 Business Days
    $ 329.00 USD
    Free Shipping
    $ 329.00 USD
    Free Shipping
    The Rogue Engineering billet aluminum engine support braces are CNC'd from lightweight ACQ aluminum, specifically designed in Solidworks 3D. The sides of each brace are milled to reduce weight while look aesthetically pleasing. While each OEM steel brace weighs 688g, each of the Rogue Engineering support braces weigh only 380g. The total savings of 1.35 lbs! Sold as a pair, available in anodized black with RE logo laser engraved into the front part of the brace.
    Show More Show Less

    Sneed4Speed - Corporate Logo
    T#:6795778
    Part#: 2128222O
    Special Order: No Guaranteed ETA
    $ 275.00 USD
    Free Shipping
    $ 275.00 USD
    Free Shipping

    Vargas Turbo Technologies - Corporate Logo
    T#:51672719
    Part#: VTT-A9X-G42-FRON
    Ships in 10 Business Days
    New Item
    $ 262.99 USD
    Free Shipping
    $ 262.99 USD
    Free Shipping
    The VTT Front Bushing Insert Kit is the definitive solution for owners looking to eliminate the "slop" in their drivetrain.
    Vargas Turbo Technologies - Corporate Logo
    T#:51778132
    Part#: VTT-E9/8X-DRAG-S
    Ships in 10 Business Days
    New Item
    $ 1,104.99 USD
    Free Shipping
    $ 1,104.99 USD
    Free Shipping
    The VTT BMW E9X/E8X Double Adjust Drag Shock Kit is the ultimate suspension upgrade for serious enthusiasts looking to shave seconds off their ET.

    Vargas Turbo Technologies - Corporate Logo
    T#:51672721
    Part#: VTT-X3M-RIFS
    Ships in 10 Business Days
    New Item
    $ 53.99 USD
    Free Shipping
    $ 53.99 USD
    Free Shipping
    The VTT Street Series Rear Bushing Inserts are the perfect "OEM Plus" upgrade for the F97/F98 chassis.
    Vargas Turbo Technologies - Corporate Logo
    T#:51778131
    Part#: VTT-SUPRA-DRAG-S
    Ships in 10 Business Days
    New Item
    $ 1,324.99 USD
    Free Shipping
    $ 1,324.99 USD
    Free Shipping
    Maximize your Supra’s racing potential with the VTT Double Adjust Drag Shock Kit, a comprehensive solution designed to eliminate the compromises of the stock Mag-Ride system.

    Vargas Turbo Technologies - Corporate Logo
    T#:51778129
    Part#: VTT-F/G-DRAG-SHO
    Ships in 10 Business Days
    New Item
    $ 1,104.99 USD
    Free Shipping
    $ 1,104.99 USD
    Free Shipping
    Maximize your BMW’s potential at the drag strip with the VTT Double Adjust Drag Shock Kit.

    Vargas Turbo Technologies - Corporate Logo
    T#:51672702
    Part#: VTT-A9X-RIDE-BRA
    Ships in 10 Business Days
    New Item
    $ 79.99 USD
    Free Shipping
    $ 79.99 USD
    Free Shipping
    The Vargas Billet Ride Height Bracket is the "peace of mind" upgrade every MKV Supra owner needs.
    Genuine BMW Motorsport - Corporate Logo
    T#:12075
    Part#: E9X-GPN-TOE
    Ships on Sep 16, 2026
    $ 279.99 USD
    Free Shipping
    $ 279.99 USD
    Free Shipping
    These BMW Motorsport Group N Bushings replace all of the bushings on the factory toe control arm (also known as the track strut). These inner and outer bushings feature a heavy duty rubber that is stiffer than stock. The stiffer bushing reduces deflection and twist in the arm, leading to more stable handling and faster response in the suspension. These bushings are great for track use and legal for some racing classes yet can also be used on a street driven car where extra ride harshness can be tolerated.

    Sold as a set of 4 - two bushings for each toe arm.

    This item fits the following BMWs:
    2008-2012 E82 BMW 128i 135i
    2006-2011 E90 BMW 325i 325xi 328i 328xi 328i xDrive 330i 330xi 335d 335i 335xi 335i xDrive - Sedan
    2006-2012 E91 BMW 325xi 328i 328xi 328i xDrive - Wagon
    2007-2013 E92 BMW 328i 328xi 328i xDrive 335i 335is 335xi 335i xDrive - Coupe
    2007-2013 E93 BMW 328i 335i - Convertible
    Show More Show Less
    Genuine BMW Motorsport - Corporate Logo
    T#:3093
    Part#: E9X-GPN-FOLB
    Ships on Sep 16, 2026
    $ 519.80 USD
    Free Shipping
    $ 519.80 USD
    Free Shipping
    These are BMW Motorsport Group N Rear Outer bushings for the Guide Rod and Upper Link (Wishbone). This is a heavy-duty rubber that is stiffer than stock to resist deflection and twist in the arm. You'll have more stable handling and faster response in the suspension. These bushings are great for track use and legal for some racing classes yet can also be used on a street driven car where extra ride harshness can be tolerated.

    Sold as a set of 4 -
    2 Upper Link Outer Bushings,
    2 Guide Rod Outer Bushings

    This item fits the following BMWs:
    2008-2012 E82 BMW 128i 135i
    2006-2011 E90 BMW 325i 325xi 328i 328xi 328i xDrive 330i 330xi 335d 335i 335xi 335i xDrive - Sedan
    2006-2012 E91 BMW 325xi 328i 328xi 328i xDrive - Wagon
    2007-2013 E92 BMW 328i 328xi 328i xDrive 335i 335is 335xi 335i xDrive - Coupe
    2007-2013 E93 BMW 328i 335i - Convertible
    Show More Show Less


    Genuine BMW Motorsport - Corporate Logo
    T#:338369
    Part#: 33327749778
    Ships on Sep 16, 2026
    Starting at $ 198.94 USD
    Free Shipping
    Starting at $ 198.94 USD
    Free Shipping
    Designed and built in-house at BMW Motorsport, these are stock rear camber arms from the E36 M3 that have been strengthened by welding a reinforment in between the wishbones. Stiffer than the stock units and still adjustable for camber. This arm is legal in many racing classes where an aftermarket arm is not permitted. Sold individually, two required per car.

    For maximum adjustment solid aluminum camber arms, you may also want to check out our TMS E36/E46 Adjustable Rear Camber Arms .

    This arm does not include a bushing, but you may choose add a bushing using the drop down below. For an additional charge, you can get the bushing pre-pressed into the arm, so it is ready to install on the car (no added shop time or hydraulic press required).

    Sold Individually.
    Show More Show Less
    Vargas Turbo Technologies - Corporate Logo
    T#:4662414
    Part#: VTT-G2X-STRRED
    Back Ordered
    $ 283.99 USD
    Free Shipping
    $ 283.99 USD
    Free Shipping
    Vargas has redesigned their line of G8x strut bars for the G2x platform. Featuring a set of carbon fiber strut bars with ends CNC machined from 6061-T6 aluminum and anodized in Red. These fit all 2019+ G2X vehicles regardless of the engine Includes: 2 M10 Flange bolts 2 M8 Flange bolts, and nuts *Note: 2021 models can choose to reuse factory hardware, strut bars may NOT work with all intakes.
    Show More Show Less