Find Parts That Fit Your Vehicle

Home
Suspension

BMW Suspension Parts

Your BMW's handling is determined by the capabilities and age of your suspension components. Our selected aftermarket performance suspension like coilovers, lowering springs, cup kits, and dampers can improve the handling of your BMW dramatically. With those upgrades comes the needs for proper adjustment; our recommended supporting modifications comes stiffer sway bars, bushings, and adjustable camber/caster plates, to name a few found on this page. Completely build your suspension for the most competitive BMW driving experience, achieve your perfect look, or simply replace your worn suspension with our recommended parts.

Sub-Categories

Sort By:

Rear Shock Mounts (RSM) HP Aluminum/Rubber - E30, E36, E46, Z3, Z4 (P...

T#:3666

Part#: JTD909

Back Ordered

$ 99.99 USD

Add to Wish List

Qty

$ 99.99 USD

Add to Wish List

These are the best rear shock mounts that we have found for the E30, E36, E46, Z3 & E85 Z4! Featuring CNC-machined billet aluminum mounting base with a replaceable urethane bushing (replacement bushings are just $15 and are changed in minutes!). These mounts are excellent for either street or track because of their low NVH (noise, vibration, and harshness). Plus, the superior design will far outlast the life of stock mounts - maybe even the car itself. You'll never think twice about your shock mounts again! These shock mounts are a direct replacement of the stock mounts so they fit all shocks with the BMW-standard 10mm shock shaft, including all factory and OEM shocks (Boge, Sachs, etc), H&R coil overs, Bilstein shocks and PSS, PSS9, PSS10 coil overs (except the B16 Ride Control Kit). This is sold as a package with new shock mount gaskets, washers, and Nyloc nuts.

Must re-use factory cupped washers!

This item fits the following BMWs:
1984-1991 E30 BMW 318i 318is 318ic 325e 325es 325i 325ic 325is 325ix M3
1992-1998 E36 BMW 318i 318is 318ti 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
1999-2005 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi M3
1997-2002 Z3 BMW Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M Roadster M Coupe
2003-2008 Z4 BMW Z4 2.5i Z4 3.0i Z4 3.0si Z4 M Roadster M Coupe

Show More Show Less

Rear Subframe Bushings/Mount Set - Rubber - E46 M3, Z4 M

T#:2051

Part#: TMS2051

In Stock

$ 291.99 USD

Add to Wish List

Qty

$ 291.99 USD

Add to Wish List

Any subframe work or reinforcement project on the rear of the E46 M3 should include a new set of subframe mounts. It's the worn rubber bushings that contribute to failed rear subframes on the E46 (but not the only reason). As the rubber gets worn, there is more flex to the mount. This flexing is then transferred to the sheetmetal in the floor where the spot welds will pop and the sheetmetal will crack. Additional force coming from stiffer suspensions and stickier tires will only increase the flexing of the mounts/chassis.

Of course, stiffer mounts would help prevent this problem but with a stiffer bushing comes ride harshness, vibration, and additional noise. Our engineers and technicians recommend replacement with the factory rubber bushings (along with the appropriate reinforcement of the floor). The rubber bushings help isolate bumps and impacts and are quiet. They are also a perfect fitment and require no maintenance.

This item is a set of 4 Original BMW rubber subframe mounts. Individual part numbers - 33 31 2 283 573 (left front), 33 31 2 283 574 (right front), and 33 31 2 283 419 (left and right rear, x 2).

Applications:
2001-2006 E46 M3, M3 CSL coupe, convertible
2007-up Z4 M Roadster, M Coupe

Show More Show Less

AST Suspension Lowering Springs - BMW i3/i3 RANGE EXTENDER

T#:590105

Part#: ASTLS-14-2686

In Stock at Vendor

$ 242.00 USD

Add to Wish List

Qty

$ 242.00 USD

Add to Wish List

AST Suspension Lowering Springs for the 2013+ BMW i3 will lower that center of gravity without giving in a lot of the comfort you are used to with the OEM springs. The lowering springs are a direct replacement of the OEM springs and have been developed especially for each specific vehicle. Made out of the best material on the best Wafios coiling machines available. AST Suspension Lowering Springs are manufactured from a premium high tensile chromium-silicone wire which is handpicked by AST engineers for its quality and metal consistency. Each spring is cold wound and then heat treated to increase hardness and reduce internal stresses present after winding. Each spring is then individually shot peened, phosphate treated and then powder coated to outlast even the life of the vehicle.

Show More Show Less

AST Lowering Springs - BMW G80 M3 & M3 Comp (RWD & xDrive)

T#:7640374

Part#: ASTLS-21-080

In Stock at Vendor

$ 461.99 USD

Add to Wish List

Qty

$ 461.99 USD

Add to Wish List

AST LOWERING SPRINGS ARE MANUFACTURED FROM A PREMIUM HIGH TENSILE CHROMIUM-SILICONE WIRE WHICH IS HANDPICKED BY AST ENGINEERS FOR ITS QUALITY AND METAL CONSISTENCY. Each spring is cold wound and then heat-treated to increase hardness and reduce internal stresses present after winding. Each spring is then individually shot peened, phosphate treated, and then powder coated to outlast even the life of the vehicle. FEATURES Progressive rates on most vehicles EDC Compatible (if applicable to vehicle) Each spring is blocked and computer tested prior to shipping, which reduces any settling once installed on the vehicle Most of our spring applications are TUV Certified and certificates can be provided upon request LOWERING RANGE Front: Approx. 30MM Rear: Approx. 15MM VEHICLE FITMENT Make: BMW Model: G80 M3 RWD + G80 M3 XDRIVE (AWD) Years: 2021 - On

Show More Show Less

Front Mount Camber Plates 3 Bolt Top - F82 M4

3-Bolt Fitment only, Will Not Fit Factory Struts

T#:554063

Part#: TMA-B15-A2-20F

Back Ordered

$ 549.00 USD

Add to Wish List

Qty

$ 549.00 USD

Add to Wish List

The plates are made out of an exotic high grade aluminum and the bearing plus its carrier are made within very small tolerances that results in a unique noise free pillowball setup. AST uses the same materials and bearings as they use in the aviation industry. That is the reason the the top mounts are almost free of maintenance. AST guarantees a good quality product.

Show More Show Less