BMW F8X M2 M3 M4 Chassis Bracing

The BMW F8X M2 M3 M4 Chassis Bracing is designed to enhance the rigidity and stability of the chassis, providing improved handling and performance for your BMW. Turner Motorsport offers this high-quality brace to support better driving dynamics and reduced flex during aggressive driving.

Benefits:

• Enhanced Rigidity: Significantly increases chassis stiffness, leading to improved handling and reduced body roll.
• Improved Stability: Minimizes chassis flex for more precise steering responses and better overall control.
• High-Quality Construction: Made from durable materials to ensure long-lasting performance and reliability.
• Easy Installation: Designed for straightforward installation with minimal modifications required.
• Optimized Performance: Perfect for both street and track use, enhancing the driving experience and vehicle performance.

M7 Strut Reinforcement Plates 53-510101 are the ultimate solution for MINI owners facing the common issue of strut tower mushrooming caused by heavy impacts from shocks and low aspect ratio tires. Over time, MINI's shock towers can develop a convex shape, disrupting suspension alignment and leading to a noticeable pull to one side. The M7 Strut Reinforcement Plates (SRPs) address this problem by reinforcing the sheet metal and shock top plate, creating a durable surface that resists bending, even during hard impacts.

Designed specifically for the R50 Base Model Cooper, the R52 Convertible, and the R53 Cooper S, these SRPs are an essential upgrade for any MINI enthusiast. Constructed from CNC machined billet aluminum and black anodized for durability, the 1/2" (13mm) thick plates cover the entire surface of the strut tower, distributing loads evenly and providing peace of mind.

Whether you drive your MINI daily or push it to the limits on the track, M7 Strut Reinforcement Plates offer a cost-effective preventative measure against expensive suspension repairs. Easy to install in less than 20 minutes, the SRPs use the stock nuts for mounting and come with instructions that also guide you through fixing existing mushrooming.

• Prevents strut tower mushrooming
• Constructed from CNC machined billet aluminum
• Black anodized for long-lasting durability
• Covers the entire strut tower surface
• Designed for R50, R52, and R53 MINI models
• Easy installation with stock nuts
• Made in the USA

If you are concerned about strut tower mushrooming and looking for improved handling, the M7 Strut Tower Brace (STB) is the solution. This is the ONLY strut tower brace on the market that features anti-mushrooming technology.

Repeatedly, we've heard the same complaint: strut towers mushroom after heavy impacts from shocks and low aspect ratio tires. Initially, the shock towers take on a barely visible convex shape, but if compared to the original sheet metal, you'll find the horizontal plane has moved as much as 3/8" upwards, making alignment nearly impossible.

This issue often shows up as a slight pull to the left or right, depending on which strut tower is affected. The M7 Strut Tower Brace's end mounting plates solve this problem by sandwiching the sheet metal and shock top plate, creating a reinforced surface that won't bend, even during hard impacts.

The M7 STB features 1/2" (13mm) thick end plates that add extra strength to the strut towers, preventing mushrooming and potentially costly repairs. The cross brace significantly improves handling by adding torsional stiffness to the front body structure, helping keep your tires planted and pointed in the direction you want to go, especially during hard turns. Machined from billet aluminum and matte black powder coated, the M7 Strut Tower Brace boasts a durable black finish that looks great and won't chip or oxidize.

We have customers who won't drive their new MINI off the lot without one and dealers that sell every new MINI with either the M7 Strut Reinforcement Plates or the M7 Strut Tower Brace.

Concerned about clearance? No worries. The M7 STB profile is designed to clear both stock and aftermarket cold air intakes and ECUs. Its modular design allows easy access to the oil filter or any other accessories that might normally be blocked and require removal of the entire brace.

Installation is a snap (often taking less than 20 minutes)! No need for new nuts—the brace uses the three stock nuts on each side. Installation instructions are available online by clicking the "INSTALLATION" link on this page.

The M7 Strut Reinforcement Plates and the M7 Strut Tower Brace are two separate products that address strut tower mushrooming (you only need one or the other).

If your MINI is mainly a daily driver, the M7 Strut Reinforcement Plates are sufficient. If you have performance driving in mind, the M7 Strut Tower Brace is what you're looking for!

Please note:

• You cannot buy the SRPs and attach the cross-bar at a later time.
• The brace does not directly fit on the R50 and R52 Non-"S" Cooper due to limited hood clearance of the non-supercharged cars. It will fit but may push up on the hood slightly, requiring molding or cutting of the hood insulation after installation.
• Trimming of the underhood insulation material may be required to fully clear this brace. This is a very tight space.

M7 Speed Suspension Product for Generation 2 MINI Cooper Models (R55-R59)

M7 Speed proudly introduces a unique suspension product for the popular Generation 2 MINI Cooper models R55 through R59. These affordable vehicles are becoming the choice for many entry-level modifiers in the German performance car segment, and they are great for Rally Cross.

Engineered to transform the mild-mannered MINI into a more capable and versatile daily driver, this product is perfect for today’s lifestyle. Whether it's for spirited adventure motoring, weekend overlanding, living off the grid, or tackling pothole-riddled urban streets, the M7 Speed 2" Lift Kit makes it possible. By installing this lift kit, the MINI is elevated by 2 inches, plus an additional lift from larger diameter tires (up to an extra 1.5 inches). No additional modifications are required—simply bolt it in, perform a realignment, and enjoy! Add aftermarket wheels and larger tires to create a unique, durable, and practical vehicle that everyone will love.

The M7 Speed Stage 1 Kit includes everything needed for the transformation. This kit features precision-fabricated lift blocks and a set of MAXX-G heavy-duty adjustable front sway bar links. These shorter links are necessary to prevent suspension bind that can occur with stock-length sway bar links.

Stage 1 Kit Includes:

• 2" Lift Kit with high-strength assembly hardware (2 front riser blocks, 2 rear riser blocks)
• Set of MAXX-G Heavy Duty Adjustable Front Sway Bar Links
• Hardware kit with high-strength, proper-length bolts and new locking nuts

Features:

• Engineered using 3D CAD software and finite element simulation for proper fitment and safe, fail-proof performance
• CNC laser-cut parts
• Lightweight fabricated steel design
• Black urethane powder coating for corrosion protection and a quality appearance
• Designed for easy bolt-on installation, complete with all new high-strength hardware and installation instructions

MAXX-G Adjustable Sway Bar:

• Enhances cornering performance, provides bind-free suspension travel, improves suspension alignment, and overall chassis balance
• Features sealed and permanently lubricated forged steel ball stud & socket ends for easy installation
• Includes a military-grade aluminum adjuster sleeve with opposing RH & LH threads for simple length adjustments
• Replaceable link ends make maintenance easy

M7 Speed is the world leader in MINI adventure motoring, overlanding, and ultimate performance products. Renowned for exceptional customer service and product innovation, M7 Speed is dedicated to engineering and producing high-quality, easy-to-install aftermarket performance products. Located in Mooresville, North Carolina, also known as Race City USA, M7 Speed is at the epicenter of North American motorsports.